Intune conflicts with check scanner

Since installing MS Intune, our Suntrust Check Scanners no longer work. The utilize port 80 and there is a conflict. As soon as we uninstall the scanners work fine. We are not using local firewalls, so they are not the culprit.
Any advice would be most welcome.
Thank you

I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
stage, as nobody has answered, I would recommend that you call Intune support if the issue still exists.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Similar Messages

Audio to midi error - check conflict with external device - apogee rosetta

hey there
i have a problem and any help is much appreciated..
basically i am running a quad xeon dual 2.66 machine under 10.4.10 and using logic 7.2. 1 gig ram.
i am using a apogee rosetta 800 with the option x firewire card for my audio interface.
whenever i set a track up to record and 'play' logic i get a message saying,
'unable to sync audio to midi check conflict with external device' and then it says something like sample rate 43021 recognised.. something close to 44100 but not quite..
so i think my problem is a clocking/sync one maybe? i have tried everything i could think of, including fixes suggested on the forums here, but nothing so far seems to help e.g making sure autosync in on the transport is unchecked, checking audio MIDI setup.
worryingly with the few problems similar to this on the forums there doesn't seem to be a way to fix it!!
anybody who could help would be a lifesaver.. this is destroying my workflow!! emailed apogee and im waiting for a reply.
thank you very much
richie

Hi,
Ok, then there can be a few more possibilities,
Try this: unplug your Rosetta, and any other FireWire devices you might have. Basicallly you want to start Logic with the internal audio.
If this works ok, then it is not an issue with the Mac's hardware, and is an issue with a FW device.
Then, quit Logic, and plug in the Rosetta by itself. Boot Logic, and select it as the audio interface. Try playing stuff back. does it work? If yes, then the issue is with another FW device. If there is a issue, then there might be a corrupt driver, a bad FW cable, etc. Keep trying one by one to go through re-installing the drivers, and also try changing the FW cable. If this still does not solve it, there might be an issue with the Mac OS 10.4.10. You might need to install Pro App support 4.0. Also, there was a fix available from Apple not so long ago specifically for FW audio devices. Please do a search in Apple's suport site for "FireWire audio device" and see if you find the patch.
If the Rosetta works when it is the only FW device hooked up to the Mac, then you have a conflict with another device, like a FW hard drive, etc... check each one until you find the culprit.
Cheers

Flash Player 10 does not work in IE or Firefox. What could it conflict with?

I'm using Firefox 3.6.8 (and sometimes IE 8.0.6001.18702IC) on Windows XP Pro, SP 3.
For some weeks now, I have been unable to hear any sounds on anything Flash-based, from YouTube to games at MSN.com or embedded videos on any site using Flash. Initially I had assumed it to be because of having QuickTime installed because I know QT likes to hijack everything. I uninstalled QT (and Real Player) and Flash Player then reinstalled Flash Player (and Shockwave Player just in case) and guess what?
Yup. Nothing. When I uninstalled everything, I used a program called Revo Uninstaller, which includes a registry cleaning option. I then used Abexo and WinASO's registry cleaners to make sure I got everything else that even looked like QuickTime off my hard drive.
When I reinstalled Flash, the following programs appeared in C:\Windows\system 32\Macromed\Flash:
Flash 10i.ocx (10.1.82.76)
FlashUtil10i_ActiveX (10.1.82.76)
FlashUntil10i_Plugin (10.1.82.76)
genuinst (6.0.2800.1531)
FlashUtil10i_ActiveX.dll (10.1.82.76)
NPSWF32.dll (10.1.82.76)
KB931433
FlashInstall
Install
Flashplayer.xpt
When I check IE's "Tools" and look for add-ons, it says that Flash (Shockwave Flash) is enabled. I even enabled the other Adobe add-ons for Acrobat and such just to be sure. Firefox shows Shockwave Flash and Shockwave for Director both to be enabled. The Flash control panel settings don't help: I have all sites set to store about 100 KB on my computer to make sure there's enough room for everything but still nothing.
Before anyone asks, my audio drivers are up to date, thanks to the manufacturer's website. I have DirectX 9.0c installed and everything else works fine. I can play audio and video elsewhere with no problems. It's only Flash that's showing me this trouble and there's no hint as to what else could be interfering with Flash.
Any ideas?

Well, great. I tried the uninstall/reinstall before, but not with the uninstaller, so I was hopeful that this time might do it. No such luck. The video still plays, but no sound.
All the sound settings are working with everything else from games to media players. I set Windows' firewall to allow both the ActiveX and plugin for Flash, just in case.
In the Flash folder, I now have:
Flash10l.ocx (10.1.102.64)
Flash Util10l_ActiveX (10.1.102.64)
FlashUtil10l_Plugin (10.1.102.64)
Genuinst (6.0.2800.1531)
FlashUtil10l_ActiveX.dll (10.1.102.64)
NPSWF32.dll (10.1.102.64)
And the setup and text files that went with 'em.
I've also done a system restart since then and zip.
I went through IE and Firefox and looked for any file associations (like .flv) that I could manually change over to using Flash, but no go. The settings panels for Flash have all been set to allow YouTube specifically (as a test) and to allow 10KB of storage space for all affected sites.
Now what? I'm really not looking forward to a reformat and reinstall, but it's looking like that's what it's going to take.
Date: Sun, 14 Nov 2010 17:37:07 -0700
From: [email protected]
To: [email protected]
Subject: Flash Player 10 does not work in IE or Firefox. What could it conflict with?
Something is strange with your list of modules; you list FlashUntil10i_Plugin (10.1.102.64), but this is really 10.1.85.3
I recommend that you uninstall Flash Player completely (using http://kb2.adobe.com/cps/141/tn_14157.html), then restart Windows, and delete all remaining files in C:\Windows\system32\Macromed\Flash.
Next reinstall both ActiveX (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and the plugin (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe).
After that, if the problem persists, have a look at this page http://kb2.adobe.com/cps/837/cpsid_83739.html
>

How to get web application to use Tuscany without conflicting with SAP SDO

Hi,
We are attempting to run a web application on SAP NetWeaver CE 7.1 SP1 which uses Tuscany SDO. As it now stands We must use Tuscany because the web application will not run with the SAP SDO implementation provided by Netweaver. To ensure that Tuscany is loaded with priority, we have packaged the Tuscany JAR files and their dependencies as a heavy resource, as described here:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60642a88-95fe-2b10-d387-a245d48fc257?overridelayout=true
The final check showed that Tuscany was correctly deployed as a heavy resource and included the following JAR files:
common-2.2.3.jar
ecore-2.2.3.jar
ecore-change-2.2.3.jar
ecore-xmi-2.2.3.jar
tuscany-sdo-impl-1.1.1.jar
tuscany-sdo-lib-1.1.1.jar
tuscany-sdo-tools-1.1.1.jar
xsd-2.2.3.jar
We also verified that the web application using Tuscany has a hard reference to the Tuscany heavy resource.
However, when we try to run the web application, the following error is logged: java.lang.LinkageError: Class commonj/sdo/DataGraph violates loader constraints
The issue is definitely due to some kind of classloading conflict with the SAP SDO library, as the application runs normally when SAP SDO is manually removed from the classpath. Doing this on a production system is unfortunately not an option, though.
So the question is: how to get web application to use Tuscany without conflicting with SAP SDO?

I took a look at the "printerReady" example. Looks like I may be able to use the InetPing (...) function to ping through a range of IP addresses looking for a response.
Any ideas on how to find the MAC address associated with the IP addresses that respond?
We may have multiple units responding and the MAC address will allow the operator to determing which unit to connect to.
I'll try the InetPing to see how it works,
Kirk

Firefox 25.0.1 Warn when closing multiple tabs (on) conflicts with "show windows und tabs from last time" (on); need both, but only one or the other works.

Using Firefox 25.0.1 on Windows 7 Home Premium
I've poured through support forums for Mozilla Firefox searching for a fix to my initial problem of the "Warn when closing multiple tabs" pop up not popping up when I have it selected.
Went through About:Config, making sure warnings for tabs und closing, und showing on quit, und quitting, etc. were all set to true, which were "possible" fixes for the issue I was having, there are like five or six things set to true for warnings/quitting/etc. No avail. They are all set to true.
Then I stumbled across one that suggested a conflict with the "Warn When Closing Multiple Tabs" und the "Show Windows und Tabs from last time".
I use both features. However, I found if I want the warning pop up for closing multiple tabs, I have to have "show homepage" or "show blank page" selected instead of "Show windows und tabs from last time" selected. (Tools>Options>General>Start Up>When Firefox Starts:) The problem with this is, yes, I get my warning pop up, BUT, I don't get my tabs from my last session.
The warning in settings (Tools>Options>Tabs>Warn Me When Closing Multiple Tabs) is checked.
To have my tabs restored from last session, I simply select it for "when firefox starts". Bam, I have my tabs that were open from the last time I quit. Und again, full circle, I don't have my warning pop up.
There were also suggestions of the warning on close for tabs is conflicting with add-ons.
However, I don't have many. Und I have yet to test them to see if they interfere. These are according to my Add Ons tab when I check it myself.
Extensions:
1. Avast WebRep (disabled)
2. HP Smart Web Printing (disabled)
Plugins:
1. Adobe Acrobat
2. Google Update
3. iTunes Application Detector
4. Java (TM) Platform SE 7 U45
5. Shockwave Flash
6. Shockwave For Director
7. Silverlight Plug-In
8. VLC Web Plugin
9. Windows Live Photo Gallery
10. Java Deployment Toolkit (disabled)
Note: The Details Firefox provides says I have these for Plugins
* Shockwave Flash 11.9 r900
* Adobe Shockwave for Director Netscape plug-in, version 12.0.5.146
* Next Generation Java Plug-in 10.45.2 for Mozilla browsers
* Google Update
* Adobe PDF Plug-In For Firefox and Netscape 11.0.05
* VLC media player Web Plugin 2.1.0
* 5.1.20913.0
* iTunes Detector Plug-in
* NPWLPG
Unsure of what the "5.1.20913.0" und the "NPWLPG" plugins are, but they don't appear to me under Add Ons.
Und as usual, I'm assuming the solution lies within About:Config, I will show here now what I have set to True.
browser.tabs.warnOnClose - True
browser.tabs.warnOnCloseOtherTabs - True
browser.tabs.warnOnOpen - True
browser.warnOnQuit - True
browser.showQuitWarning - True
As aforementioned:
The seemingly only issue is the conflict between Show Windows/Tabs From Last Time und the Warn On Quit pop up. Und again, I need/want both of them. More so the tabs from the last session, but I really really really really really want the warning.
So, if anyone knows a work around, preferably without having to download anything to fix this, I would be extremely grateful.

You mention a second subject.
''I'm probably going to downgrade to another version of firefox that was suggested to me since I'm also having issues with shockwave flash causing firefox to hang und ultimately needs to be force closed otherwise having to have flash disabled to use firefox.''
Downgrading Firefox 
Flash is notorious for causing Firefox problems. I suggest you start a new thread about that. If at all possible you should try to avoid downgrading to an unsecure & unsupported version of Firefox. it will increase risks to your system and Personal data. (There are methods of mitigating the risks, using a virtual machine or operating within a secure intranet for instance)
*(Do Not) [[Install an older version of Firefox]]
Try Flash with Protected Mode Off 
Worth a try as it takes minimal effort & often solves Flash Problems whilst allowing current and more secure FlashPlayer to be used. See
* http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
* http://forums.adobe.com/thread/1018071#TemporaryWorkaround
If you wish to pursue these subjects further I note you have already started a thread you may as well continue the discussion in that thread, but also post back here so we can follow both.
* ''Firefox is having "Script" issues (Not Responding) und possibly Flash issues?'' [/questions/978181]
** try ensuring you close down Firefox using the menu, that may even help with Flash problems.
Your experience in submitting troubleshooting information on the forum 
(This is out of curiosity, but with the intention of pressing for changes if forum faults are discovered.)
There are yet more changes to this forum underway. Mozilla recently tried to improve the experience for first time users of the forum and a troubleshooting app option was included in the workflow to try to encourage users to submit full troubleshooting information.
I would be interested to know what you thought
I sometimes wonder if users are not trying to use that, or whether forum users run into problems in using it. At one point I wondered whether there was a problem if too much data was included but never actually proved that conjecture.
Assuming you are using the forum, and not merely replying by email look towards the top in the right hand margin for clickable buttons
* Question Details -V- More System Details -> [Additional System Details]
You will note that includes only partial information. There are no changed prefs or extensions listed. Compare for instance the information in this thread [/questions/978130] with full information.
I believe your mystery plugins are Windows related
* NPWLPG relates usually to Windows Live Photo Gallery
* 5.1.20913.0 will be Silverlight

Is anyone else having conflict with 10.8.2 update and audio files?

I recently updated from 10.8.1 to 10.8.2 (big mistake). Now my digital interface has all of these random clicks and pops. Worse yet, when I try and play my audio files (Digital Performer) or ITUNES that music stops, starts, stutters and is basically unlistenable. Before the update everything ran smoothly. I talked with the tech support for my digital music application (Digital Performer) and he thinks there is a conflict with the latest Apple update too. Is anyone else having these problems?
To get back to 10.8.1 do I have to wipe the hard drive and re-install everything? I use my Mac for music production so this is killing me. Any ideas?

I once again reloaded 10.8.2, all of the current firewire, USB, and printer drivers (why not make sure those are up to date too, what have I got to lose?). Checked the cables, the Mac firewire ports etc. No change.
So I bought a cheap back up firewire drive (Western Digital, My Passport Studio-about $100). That worked perfectly on the firewire port of my Mac Pro.
I hooked up my MOTU 828 firewire audio interface into the Western Digital's second firewire port, and everything works perfectly.
I wish I had known that daisey chaining devices would solve my problem before I spent $500 on a new firewire interface.
If you are having similar problems with firewire connection, then try daisey chaining through a device that has no problems. Who knew a solution could be so simple?

[SOLVED]"fontconfig conflicts with fontconfig-ubuntu" and other issues

Almost every program I have has stopped working. If I run a program from a terminal (one of the virtual terminals, gnome-terminal wont work either), they either complain about not being able to find libpng or libjpeg. I read the news posting about these and some forum posts, but none of them mentioned people having problems. What I understood from reading is that I just need to update my system.
This is where the problem lies. I cannot run "pacman -Syu" as usual. When I do, I get the following error:
fontconfig conflicts with fontconfig-ubuntu. Remove fontconfig-ubuntu?
If I answer yes, I get:
error: failed to prepare transaction (could not satisfy dependencies)
:: kdelibs: requires phonon
:: cairo-ubuntu: requires fontconfig-ubuntu>=2.6.0
:: libxft-ubuntu: requires fontconfig-ubuntu
If I answer no, I get:
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: fontconfig: conflicts with fontconfig-ubuntu
Either way, nothing is upgraded. How can I resolve this, as well as the libpng/libjpeg issue? I cleaned my cache and tried re-installing them, but it didn't help.
Last edited by DWilliams (2010-02-11 00:35:07)

DWilliams wrote:
Surgat_ wrote:
Or you can check AUR, get the latest pkgbuilds and rebuild your -ubuntu (or -lcd) packages. After installing them, the update should go flawlessly.
Also, if you have KDE installed you should check the news frontpage to see the KDE 4.4 announcement
Alright I installed fontconfig-ubuntu from the AUR and that resolved my initial conflict. It started complaining about gtk-qt-engine and kdelibs and they weren't depended on by anything so I just removed them (I assume I can re-install them later) and now my system upgrade is underway. Hopefully things will be fixed when it finishes.
Does anyone know what caused this and whether I can avoid similar issues in the future?
It happens because you are using a modified version of fontconfig (the ubuntu one). When a new version of fontconfig reaches [extra], pacman tries to update fontconfig (because fontconfig-ubuntu provides fontconfig, and fontconfig from [extra] is newer than the version you have installed) and finds that it conflicts with fontconfig-ubuntu.
The way to go is the one that you have followed: when there is an update in fontconfig, update your fontconfig-ubuntu package to the latest in AUR (hopefully the same version as the new one in [extra], else you'll have to wait or modify the PKGBUILD) and then update the rest of the system.

Conflict with Third Party Apps?

I am getting an occasional error saying there is a possible conflict with third party apps and that I need to check the drivers of my MIDI devices to see if they are up to date? Sorry but I did not record the exact wording. Does anyone know what this might mean, and how I need to go about checking drivers? I have a lot of interfaces and not sure how to see what's what. Thanks.

Hi Midlake,
Well, because they are known troublemakers. Search for 'takes' or 'take folder(s)' or 'comp' here on the forum and you'll find many a troubled soul crying out for help - including seasoned pro's, who thought they were beyond tears...
O, they are fine for recording many takes - but thats' all. I'll select the best takes/phrases.
regards, Erik.

PP CS6 on Retina Macbook conflicts with YouTube/Pandora

I bought my Retina Macbook recently, and the first thing I did was to install Premiere Pro CS6 on it. I did the hack - inserted GeForce GT 650M to the list - and enabled the Mercury Playback Engine.
Ever since then, I've been having all sorts of problems, but the most annoying problem is that in the midst of editing, somehow Program Monitor would either freeze or black-out.
I seriously tried every possible ways I could do to resolve this as an average user. I tried resetting the preferences, switching the drives, turning the machine on & off, and all the magic joojoos. None of them worked, until I found out the problem starts to happen as I open other applications along with the Premiere Pro opened.
I began to wonder, does the graphic card or Premiere Pro CS6 conflict with any programs I have opened? So I tested it out.
I found out that while having CS6 and Safari (or any kinds of web-browsing programs) on, the "crashes" occur very often. I also found out it typically happens when I turn on Pandora and YouTube.
The moment I shut off the Pandora tab, YouTube tab, or even websites with any kinds of visual or audio media turned on, the freezing or black-out situation on the Program Monitor immediately stops. If turning off the tabs doesn't work, then quitting the program entirely solves the problem.
From what I've tested, it's for sure to say Flash or Video Playback on webpages conflicts with GT650M card. It's certainly not the software problem, because when Software Only mode is turned on, all the images come back on the Project Monitor. I mean, what kind of weird conflict is this?
Can anyone else with a Retina MacBook confirm this?
In case if Anyone is wondering, this is the setup I've used.
Retina Display Macbook Pro
16GB Ram option
256GB SSD option
NVidia GT650M 1GB VRAM
Video files in the SSD

It's absolutely woeful.
Like traveling back in time with modern software and putting it on last generation hardware... or two generations previous hardware.
What floors me the most is that there's not any spikes or even utilisation of the CPU and GPU going on... I have CPU and GPU monitoriing software for the more beserk applications I use. I checked them out when using Illustrator and Indesign. The CPU and GPU is hardly getting tickled... so it's JUST poor software engineering at work. VERY POOR software engineering.
There's at least 90% of the CPU and GPU power completely unused during moving operations and object creation. So it COULD be fast, and performant, if they cared to actually use the CPU and/or GPU more effectively/thoroughly when we want to DO something inside the software.
I don't even know how you'd code something this woefully under performant. You'd have to plan to do it, or be using MONO or some other uselessly single threaded, low priority frame work...
Maybe these apps are programmed in Java

"conflicts with the WAN IP address"

I just picked up a used AirPort Extreme N (Gigabit Ethernet) to replace my current non-Apple router, which has worked satisfactorily but lacks the ability to share disks--something I need. Using my G5 running 10.4.11, I downloaded AirPort Utility 5.4.2 to set up the new (to me) device, and did a factory reset just to clear everything out. I placed the AirPort in the network exactly where the old one had been--with its WAN port connected to the line supplied by my ISP (see below) and its three other ethernet ports connected to various clients. Then I ran into a problem:
Under the "Internet" icon of Airport Utility, I set it to Connect Using Ethernet, and Configure IPv4 using DHCP (My current router uses DHCP to provide IP addresss to both the wired and wireless devices on my network). The numbers below that are: IP address 192.168.1.12, subnet mask 255.255.255.0, and router address 192.168.1.1.
The first field of the line labeled "DNS Server(s)" defaults to 192.168.1.1, while the second field is empty, as are the fields Domain Name and DHCP Client ID. I left Ethernet WAN port on "Automatic" and put "Connection Sharing" on "Share a Public IP address," since I believe its combination of DHCP and NAT offer the best security.
The problem: When I click the "Update" button to confirm my settings, I get this message: "The DHCP range you have entered conflicts with the WAN IP address of your Apple wireless device."
Although I am unclear as to why the Internet Connection pane of the AirPort Utility lists "IP address" and "Router address" as two separate numbers (aren't they referring to the same device, the AirPort itself? How can it have two IP addresses?), I figured that I could play it safe and change the starting number to 192.168.1.13 to avoid the conflicts with 192.168.1.12.
But I still get the same error message when pressing "update." I tried changing the range to 192.168.1.50 - 192.168.1.60, and I still get the same error message. There seems to be no range that the utility will accept as non-conflicting with the "WAN IP address" of the Airport.
My ISP did not provide a visible modem as others in the past have done. The internet connection they left me simply comes out of a box on the back of the house that is connected by fiber optics to (presumably) a fiber optic line out in the street. However, this "supply line" has always worked fine with my non-Apple router and--after disconnecting the AirPort that had temporarily taken its place--is working right now as I throw this question to the forum.
Additional notes:
* Under the NAT tab, the box "Enable NAT Port Mapping Protocol" is checked, as it was by default) while "Enable default host at" is unchecked and blank.
* While I currently have wireless turned on in the AirPort, I haven't even tried wireless connectivity yet and want to make sure my wired connectivity is working first.
Thanks for any assistance.

The problem: When I click the "Update" button to confirm my settings, I get this message: "The DHCP range you have entered conflicts with the WAN IP address of your Apple wireless device."
This error message typically indicates that your 802.11n AirPort Extreme Base Station (AEBSn) is receiving a Private (as opposed to a Public IP address) on its WAN port. That could be because your ISP does not provide any device (computer or router), that is directly connected to their "box," with a Public IP address.
Your AEBSn is both a DHCP client (on the WAN-side) and a DHCP server (on the LAN-side). The Configure IPv4 is basically the on/off switch for the AEBSn's DHCP client. It's other option, PPPoE, would only be used if your ISP requires it.
One option would be to reconfigure the AEBSn as a bridge. This would disable both the AEBSn's NAT & DHCP services.
Although I am unclear as to why the Internet Connection pane of the AirPort Utility lists "IP address" and "Router address" as two separate numbers (aren't they referring to the same device, the AirPort itself? How can it have two IP addresses?
The IP address information on (actually the TCP/IP pane) is showing you the AEBSn's WAN port settings. Settings that with Configure IPv4 set to Using DHCP would come from the DHCP server upstream of it. If this server was providing Public IP addresses then the values in both the IP Address & Router Address fields would not be in any of the three valid Private IP Address ranges (10.x, 172.x, or 192.x)
Under the NAT tab, the box "Enable NAT Port Mapping Protocol" is checked, as it was by default) while "Enable default host at" is unchecked and blank.
This setting would not have anything to do with the error message that you are getting. Instead, this option is used as an on/off switch for the NAT-PMP protocol. This protocol is similar to non-AirPorts' UPnP protocol.
While I currently have wireless turned on in the AirPort, I haven't even tried wireless connectivity yet and want to make sure my wired connectivity is working first.
Both wired and wireless clients will be impacted by this until resolved. I again, suggest that you try reconfiguring the AEBSn as a bridge. (ref: AirPort Utility > Select the AEBSn > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode))

How do I delete my account, please and thanks! It is conflicting with my college's license.

I licensed cloud month by month as an educator, then found out that my college has a license. They installed it my machine, and Adobe cancelled my subscription. Now I can't use my college's copy because it is conflicting with my cloud subscription. When I go to my account to delete it, I only see the option to contact customer support, and see no way to do that. Please help! I have to get my work done and now our IT folks are telling me that the only way to get rid of the Adobe Application Manage on my computer is to wipe it out and reinstall everything! Yikes.
Thanks for any help you can give. This is just plain crazy. :-)

I have created a small Step by Step presentation for the same. You might want to check that as well.
https://dl.dropboxusercontent.com/u/5585693/Adobe%20Forums/Sign-in%20with%20new%20user.mht

Text editing bug: conflict with Facebook widget

And just when I thought this program couldn't be MORE frustrating. The simplest of text editing features flatly refused to cooperate. Double click, triple click, with the direct selection tool selected. Nope won't select a goddam thing. Turned out to be a conflict with a Facebook widget I had applied on a master page.
ATTN: bug department!

Thank you so much for replying.
Yes I have removed and reinstalled WMP.
I had good results with the PD6 application installed on the default path onto the C: drive with the one exception that if the application was launched by accident and the user data path was not available, the PD6 application would blow away my custom user path registry settings. Now that I know what they are I have made a .reg file to repair my registry to my desired user data paths.
Installing the application on the removable drive appeared to help prevent me from launching the application by accident and overwriting my registry with default user paths.
So which is the less of the two evils?
If the application directory is not available, windows media player still tries to launch the .msi for installing PD6.
If I install the application to the C: drive but the user data to the removable drive, launching the PD6 application without the user data drive will still corrupt my registry settings for a user data path.
Both these issues seem like a logical (if not easy) fix that should be done in the PD6 application and installation package. I mean really, cannot anyone tell me why windows media player is checking the PD6 application directory? Why in PD4 did we have an option control for setting the user data path from the PD4 application? Why is this option not in the PD6 application, just the installer?
I am given a choice during installation to move the user data to another non default location. Why else would this be provided if not to accommodate my kind of request to store the user data into an alternate location other than “My Document”. Certainly Palm is not trying to force the users on how to protect and store their personal data?
Post relates to: Centro (Verizon)

Thunderbird PC conflicting with Android Pad when connected home

With Thunderbird running on PC and android Pad running in another room also connected to my email account (Pad doesn't have Thundrbird as we all know) . Every so often Thunderbird will not connect to email provider and ask for password. Which does not work.
Provider checked out my PC and finds that Thunderbird it has a conflict with devices and will not access provider. Pad has no problem at all but the Pad is the conflict device
Is there any way of configuring Thunderbird so it does not see the Pad as a conflicting device.
Almost makes me want to go back to explorer as it does not let this happen.
Surely it cannot be that hard to port a simpler Thunderbird for androids and stop this problem of conflict as I want to stay with Thunderbird
Thanks

You may try to increase the interval how often both, Thunderbird and your tablet are checking for new mail.
Otherwise I don't see what kind of conflict your provider may be suspecting. When the problem happens only every once in a while, it sounds more like a provider issue. And it seems your provider folks don't have a clue about Thunderbird.
''Provider tells me that Explorer does not let this happen.''
Are you talking about webmail? That's would be a completely different thing.
''Surely it cannot be that hard to port a simpler Thunderbird for android''
You wouldn't believe how hard.
http://quetzalcoatal.blogspot.de/2013/09/why-email-is-hard-part-1-architecture.html

VoiceOver conflict with arrow keys ??

I have just found that VoiceOver is in conflict with the Up/Down/Left/Right Arrow keys. If it is on the four keys do not work. I tried another keyboard to check whether it was a hardware problem and exactly the same happened with VoiceOver on. Why?
Until yesterday everything worked fine but suddenly I lost the arrow key functionality. Any ideas, anyone?
Note: I am not referring to the number pad and its keyboard mouse keys.

Hello Helen,
First of all, VoiceOver makes very heavy use of arrow keys, so you are right in suspecting that this is an oddity, and not a "feature" of VoiceOver.
I've managed to reproduce this behaviour with the following sequence:
1) Turn VoiceOver on (Cmd-F5).
2) Activate QuickNav (left and right arrows simultaneously).
3) Interact with an element containing only one item, via down + right arrows.
4) Arrow keys will only "bong". No movement possible until QuickNav turned off again. Otherwise, turning VoiceOver off will also restore the arrow keys to normal—until it's turned back on again, when it will once more get "stuck". Of course, stopping the interaction via left+down arrows also restores free movement—but with QuickNav active, only the VO cursor moves, not the focus, so that can be disconcerting when trying to navigate menus, etc.
So the solution may be to turn VoiceOver on, then ensure QuickNav is off (left + right arrows), then VoiceOver off again.
Hope this clears it up!
Archie

PCI USB2 Controller card conflicts with network card

I've installed a PCI USB2 controller card since my motherboard (IWill K266-R) only has support for USB1. However, the card seems to conflict with one of my network cards, because traffic on the internet-connected NIC is very slow, and often drops completely. Traffic to and from the other (local) NIC seems to work fine, though.
I have tried moving around all three cards in different PCI slots, I think I've tested almost every possible combination by now. I've also tried disabling as much as possible in BIOS, such as onboard sound, serial and parallel ports etc. I've tried lowering the FSB.
For now, I've removed the controller card, and is using the USB1 ports on the motherboard instead. This is very frustrating, though.
Does anyone have any suggestion on what I can try next? I've browsed forums, both this and others, but I haven't found any more hints on what to try. Could there be some setting in Arch that could affect these sorts of things?

"I guess the ATA100 card will work fine correct?"
If you mean large drive support, it may provide that or may require a firmware update to do so. You should check the manufacturer's web site for specifics. All ATA-133 cards do provide 48-bit LBA for large drive support. I'd return the Ultra ATA-66 card to the eBay seller, although many refuse to pay for return shipping, even when the mistake is their own, either through ignorance or deliberate misrepresentation. In cases such as this, it's sometimes more cost-effective to swallow the loss and keep the incorrect part.
"Will adding a jumper apply for a ATA100 card as well? I'll need a blue and gray ribbon correct?"
If you use an 80-conductor ribbon cable with color-keyed connectors, set the drive configuration jumper to CS and connect the drives to the cable as you wish (in terms of physical placement in the computer). If the ribbon cable doesn't have color-keyed connectors, set the jumper for the device connected to the end connector as Master and the drive (if any) connected to the middle connector as Slave.

Intune conflicts with check scanner

Similar Messages

Maybe you are looking for