INV.PARTY field characteristics change - Reg.

Dear Experts,
I would like to set the characteristics of the field INV.PARTY(under details tab in MIRO) in such a way that, if PO is referenced then inv.party should be captured from PO and it should not be modified. Also, if PO has not referred(say manual entry)then inv.party field should be open for manual entry.
Kindly guide me to achieve this. Thanks in advance.
Regards,
Kumar

by standard settings your requirement is not possible. go for ABAP development

Similar Messages

  • MIRO - Inv Party field - change to display

    Hi,
    In MIRO, at Header, under 'Details' TAB there is a field called 'Inv. Party'.
    This field is editable.
    How  I can make this as a display field?
    Please advice.
    Thanks

    Try to use Tcode SHDO then put transaction MIRO, you can create your own screen variant as per your requirement.
    Regards,
    w1n

  • Sold-to-party cannot be changed

    I have created a sales order with SP ...0001 now i want to change the SP to 0002
    .both 0001 and 0002have different sales area.It doesnot allow 001 to be changed
    Why a sales area for a sold-to-party is not redetermined?
    What factors restrict it?

    Hi Nikhil,
    If I have correctly understood your question, then you mean to ask why the Sales Area is not redetermined in the Sales Order, when you try enter the different Sold to party.
    Firstly, as soon as you save the Sales Order, the Sold to Party field becomes greyed out ( Non ediatable).
    Secondly, the sales area is mandatory data at the Initial selection screen while creating the Sales Order. The Sales area is not determined from the Sold to party. It is the other way round. The Sold to party is checked, whether it is of the same Sales Area, as you have entered in the initial screen.
    I hope this input will help you understand the logic better.
    Regards,

  • How to automatically set value of sold to party field in crmd_order screen?

    Hi Experts,
    We have a requirement where we have to automatically populate a standard SAP screen field when the screen opens. The T-code is crmd_order and the field is present in the fast entry tab whenu201Dcreate support messageu2019 is clicked. Now I am trying to achieve this by implementing the BADI which this T code calls. There are no user exits to this as per my understanding. There are some 20 BADIs this Tcode calls before opening. I have tried implementing almost all of them but the value is not getting reflected on the screen field. List of BADIu2019s called are as below.
    We are trying to automatically populate the sold to party field based upon the guid of the support message. Based upon this guid of the support message we are fetching list of partner function from u201CBAPI_ACTIVITYCRM_GETDETAILMULTu201D. Then we are taking the partner function value of u201CSLFN0002u201D. The BP number captured from this partner function will be passed to u201CBAPI_BUPA_ADDRESS_GETDETAILu201D to get the country of the super user. Based on this country the sold to party is to be determined.
    We have made a Z table for fetching this sold to party/region based on the country derived from above logic:
    Z Table
    Country                 Region/Customer/sold to party
    IN                            IN/BAN-C1
    BD                          IN/BAN-C2
    US                          US/CAN-C1
    Now these unique (sold to party/region) values  based on the country has to be populated automatically on the sold to party field of the screen (CRMD_ORDER).
    The logic for deriving the same is correct and the main problem is to default it on the screen field.After getting the value of the required field I am trying to display it on the screen by using the standard FM u201CCRM_ORDER_MAINTAINu201D and passing the value in IT_PARTNER.The FM is getting executed but the value is not getting reflected on the screen. I donu2019t understand where it is going wrong I am not able to solve this.Kindly let me know if anyone can throw some light on this.
    Regds,
    vlp

    Hi vlp,
    You can achive it with BAdI:CRM_ORDER_FIELDCHECK. Actually I've implemented the similar case  with this BAdI. This BAdI is called many times because it always works when any field is changed. So you should restrict the timing your logic works.
    Regards,
    Masayuki

  • User Exit to validate sold to party field

    Hi Friends,
    Is there any user exit/ BADI to validate sold to party field in VA01. This exit should not only apply to the VA01 transaction but anywhere customer number is created in SAP. It should be possible to find a user exit that is called right at the time of entry of the customer number so that the search in the database can be intercepted and search by either number and return the one found.
    I found V45A0002 ...but this is for predefine values on sold to party field.
    Please Note: - It should be common user exit to validate sold to party and customer number in any trn.
    Points will be given for helpful answers.
    Regards,
    Hari krishna

    Hi Nagaraj,
    Thanks for your reply.
    In this include (MV45AZZ), It will stop at the user-exits USEREXIT_MOVEFIELD TO_VBAP, USEREXIT_FIELD_MODIFICATION.
    But however, I tried to create/change customer in XD01/XD02...It was not stopping in MV45AZZ at any of the exits.
    Any alternative solution or Is there any exit/ BADI ???
    Regards,
    Hari krishna

  • MB56-sold to party field value is not appearing

    Hi,
    In MB56 - Batch where used list report, there is no data flowing for sold-to-party field. Sales order is displayed and delivery also performed for the same. But, still there is no sold-to-party data.
    Mean while, it shows sold-to-party value against some STO transactions in MB56.
    Kindly help me out to solve this problem.
    Thanks in advance
    Regards
    Sudhar

    Hi Sudhar,
        Just change the Layout, you should see the Outbound Delivery/Sales Order/Sold-to-Party information.
    Thanks

  • Serv. Desk: Action: send an email only when a value in a field has changed

    Hello,
    In Soution Manager 4.0, Sevice Desk, I would like to create an action which creates an email only when a value of a certain field has changed.
    - only in change mode relevant
    - only when a value of one field has changed (e.g. Message Processort has changed from Buss. Partner 4 to 5. Than a mail should be sent to BP 5).
    - it should only send this kind of email when the field value has changed in change mode. In other words: it should not sent the email e.g. when the status has changed.
    I tried all kinds of things but I do not know on how to define the COnditions for an Action, so I can compare e.g.
    if <old value> <> <new value>
    Any ideas or experience on how to implement this without major modifications ?
    Thanks
    Christian

    Hi Christian,
    check out my question on SDN.
    Email on Status Change
    it has details on how to send an email when the status changes. I believe you are going to have to do something like this for each of the fields you want to create an Action Starting Condition for.
    regards,
    Jason

  • PDF form text fields' options change when opened in READER on a MAC.

    I created a PDF form using Adobe X PRO. All fields are UNCHECKED for Property/Options/ "scroll long text". I save and distribute the form as a "reader extended pdf/enable additional features" so it can be saved and returned using READER.
    When a Mac user opens the extended form in Adobe READER, ALL the text fields change to scroll. When he returns the completed form to me, every text field, even signature and date fields, are changed to scroll text.
    What is happening in the transition from PC to MAC?

    Preview is the default PDF viewer on the Mac. It should never be used with PDF forms. Just let them know that they should use Adobe Reader. Provide a link or URL where it can be downloaded and let them know that it's free.
    There are things you can do so that it doesn't work in Preview, but it involves some scripting. If interested in this approach, post again.

  • Update Field On Change For A SQL Query (updateable report)

    Hi,
    I'd like to request help from anyone with ideas on how to solve this.
    We are using APEX 4.2, 10GR2, RedHat5.
    I have a report that comes from SQL Query (updateable report).
    I'm using the apex_item.text and apex_item.hidden on fields.
    I'm using a button to submit and after submit process to add some logic that I need.
    There could be 1 - 10 records in the report.
    There is only 1 field that is needed to enter a value, but the value of this field determines the value of another field.
    I think that I can do this with a submit button and an after submit process where I loop through all the records. I think I have this handled.
    This is the question
    When the value of that field is changed then the value of another field in the same row changes immediately.
    Is this possible?
    All the examples I've seen so far are for a single record and that doesn't work for us.
    I guess this is a MRU process but I haven't seen an example where a dynamic action is possible on a Multi Row Update.
    Could anyone direct me to where I can see an example or help me get directions?
    I appreciate all your help an comments and I thank you in advance.

    Yes why not...what you looking for is a ajax call
    See {message:id=10390979}
    Please note:-you can also do this as a dynamic action as shown below
    Event: Change
    Selection type: jQuery Selector
    jQuery Selector: input[name="f01"]
    True action with Execute JavaScript Code and put all code inside the test funtion, you may need to amend the code to use this.triggeringElemnt in place of this

  • Sold to Party and Ship to party field are in grey out mode in VA01.

    Hi Friends,
    I am facing a very critical situation, Please help me on this.
    While creating the sales order by VA01, the Sold to Party and Ship to Party field are in grey out, so we cannot enter sold to party and ship to party. This is happening for all Order types.
    And while checking the existing sales order by VA02, so I found that at Header level and Item level the Partner tab are disable
    ( mena partner tab are in grey mode,).
    But when we click on sold to party field in VA02 it directly moves to partner but all Partner shown in Sales tab.
    I have check all the partner function and partner determination configuration.
    So can any one help me out in this, how in VA01 sold to party and ship to party field are in grey out mode.
    How in VA02 the partner tab are disable.?
    Thanks
    Irfan Ullah
    09370236510

    Hai Irfan Ullah,
    In Sales - customer
    1. Partners are listed (SP,BP,PY, SH)for account group and Partner Determination procedure(TA) is assigned to it
    Now for sales order type you need to assign the partner determination process
    SPRO
    Sales and Distribution
    Basic Functions
    Partner Determination
    Set Up Partner Determination
    Execute
    Set Up Partner Determination for Sales Document Header
    Select TA - standard order from the right side list
    and select Partner Determination Procedure Assignment (from left)
    Now assign your sales type to Partner determination TA.
    Create a SALES order you can find the sold to and ship to are editable.
    Regards,
    Mani

  • Posting Key Field Status changes - unable to generate Transport request

    Dear All,
    I did posting key field status change from suppress to optional ( P.Key 24).
    However I am unable to generate a transport request.
    Please share your inputs
    Thanks
    Sanjai 

    Hiii sanjai Babu... your client would have set automatic recording of changes in scc4... or the request would be created and yo woulnt have left the page after saving soo it might have been saved... hope it helps...
    Regards
    Abhay

  • Suppress Non Changed Fields in change pointer triggered IDOC

    I have a requirement to clone message type MATMAS as ZMATMAS. This ZMATMAS is the message type I used to create change pointer triggering outbound idoc for change/create of materials.
    When i change a material, all fields are sent instead of the fields only changed(of course key fields should be sent as well). Is there a way via configuration that I can suppress fields which are not changed? Or do i need to clone FM MASTERIDOC_CREATE_SMD_MATMAS and suppress the fields via program
    Thanks in Advance!

    i'll clarify the requirement again.
    Let say i changed a field BRGEW in the material master.
    Currently, all the segements which contains BRGEW is sent, but these segements contains other data which are not changed in the material master.
    How do i suppress it?
    Thanks,

  • Ship-to-party field in display mode in TC va02 for some users.

    Hi Sap Gurus,
    My client requirement is this ,he wants the ship-to-party field in TC Va02 to be in display mode for some lower level user and at the same time she wants the ship-to-party field for higher level users to be editable.
    Can anybody tell me how to do this .Va02 TC will be given to lower level users where they will be able to edit other fields except ship-to-party.
    Thanks N Regards,
    Siddhartha

    Hello Siddhartha ji,
    I think you can proceed in this way:-
    Create TCode zva02 by copying from VA02 .
    Then Create Screen Variant and assign that screen variant to transaction variant .
    Then Create Variant Group for that Tcode and then assign this variant group to those particular users.
    Even you can proceed with out creating the ZVA02 Tcode.
    All Will be done in SHD0 TCode.
    @ others :- i am basicaly into ABAP...so I may be wrong...pls Help him out ..
    Regards,
    jeevan kumar Medimi.

  • SD : Ship to party and bill to party address getting changed in sales order

    Dear All ,
    We are facing a problem in production client regarding Ship to party and bill to party address getting changed at the sales order level. First of all , i would like to discuss the sales business process in which the problem is getting faced.
    Step 1 : The sales order is created for machine with all relevant details and the ship to party and bill to party address is changed as per the business requirement.
    Step 2 : The outbound delivery is created with reference to sales order.
    Step 3 : The commercial invoice, intercompany invoice and excise invoice is created.
    Step 4 : The Credit memo request is created with reference to commercial invoice no.
    Step 5 : The Credit memo is created.
    Step 6 : The FOC value contract is created with reference to credit memo.
    Step 7 : The FOC release order is created with reference to value contract, where ship to party and bill to party address is changed as per requirement.
    Step 8 : Outbound delivery is created for realse order.
    Step 9 : The FOC invoice is created.
    The problem is the moment we change the address in step 1 , the system gets in manual mode. Hence, whenever Bill to party and ship to party address is changed at Step 7, the same gets replicated at the machine invoice level which is incorrect.
    Please comment / reply ASAP.
    Regards.

    During the manual change if you  want to assign a new address number (which
    prevents the changing of the address in the preceding document),
    you can use Note 97832 (modification).

  • Problems Validating User Fields in Change Lease-Out

    Good Morning,
    I've defined two Date Fields in Change Lease Out (transaction FOV2).
    I need that when the first date field is empty the system returns a error message stating that the first data field should have data.
    The second fill can be with or without data.
    The problem is that, right now, the system returns the error message in every case except if both fields are filled.
    Here is the code done by the developer:
    FUNCTION field_exit_usrdate_1.
    *"*"Local interface:
    *"  IMPORTING
    *"     REFERENCE(INPUT)
    *"  EXPORTING
    *"     REFERENCE(OUTPUT)
      DATA dt_usr08 TYPE vzsort-usr08.
      IF input IS INITIAL.
        MESSAGE e005(z3_re).
      ENDIF.
      SET PARAMETER ID 'DT_USR08' FIELD dt_usr08.
    ENDFUNCTION.
    Why the system always return the error message except if both the data fields are filled? Any clue?
    Best Regards,
    Pedro Gaspar

    Solved Myself

Maybe you are looking for