Invalid character value for cast specification using SSIS? Please assist

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft
SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Invalid character value for cast specification". There was an error with input column "INV_DT" (627) on input "OLE DB Destination Input" (332). The column status
returned was: "The value could not be converted because of a potential loss of data.". SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (332)" failed because error code 0xC0209077 occurred,
and the error row disposition on "input "OLE DB Destination Input" (332)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information
about the failure. SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Destination" (319) failed with error code 0xC0209029 while processing input "OLE DB Destination Input" (332). The identified component
returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. The attempt
to add a row to the Data Flow task buffer failed with error code 0xC0047020. SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC02020C4. The component returned a failure code when
the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.

Hi Jony2422,
From the error message, we can infer the issue is caused by the input column “INV_DT” cannot convert to the output column in OLE DB Destination.
Based on my research, the exactly cause is the data type of input column “INV_DT” can convert to the data type of corresponding output column, but the data in the input column “INV_DT” cannot convert to the data type of corresponding output column. We can
verify the issue in the Advanced Editor dialog box of OLE DB Destination.
To avoid this issue, please make sure the input column can convert to the output column in OLE DB Destination, including the all the values in the input column. For more details, please refer to Visakh's suggestions.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specifi

[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification
An you help me with this error?
This is the problemativ query:
Search QUERY : SELECT DISTINCT theK_files.fileid, theK_files.name, theK_files.t
itle, theK_files.description, theK_users1.name AS AuthorName, theK_users1.surn
ame AS AuthorSurname, [theK_file-extensions].name AS Extension, theK_files.publ
ished, theK_files.updated FROM theK_users INNER JOIN [theK_users-to-groups] ON
theK_users.userid = [theK_users-to-groups].userid INNER JOIN theK_usergroups
ON [theK_users-to-groups].groupid = theK_usergroups.groupid INNER JOIN [theK_g
roups-to-files] ON theK_usergroups.groupid = [theK_groups-to-files].groupid INN
ER JOIN theK_files ON [theK_groups-to-files].fileid = theK_files.fileid INNER
JOIN theK_users theK_users1 ON theK_files.authorid = theK_users1.userid INNER
JOIN [theK_file-extensions] ON theK_files.extensionid = [theK_file-extensions]
.extensionid WHERE theK_users.userid = '1' AND theK_files.extensionid = '1' AN
D ( theK_files.name LIKE '%a%' OR theK_users1.name LIKE '%a%' OR theK_files.de
scription LIKE '%a%' )

are these columns character/string/varchar:
theK_users.userid = '1'
theK_files.extensionid = '1'
if these are number columns, change them to
theK_users.userid = 1
theK_files.extensionid = 1
Jamie

Invalid character value for info object

Hi Experts,
Iam getting this error,when loading master data
Value 'H4-LAMPE 'for characteristic 0Material is in External Format.
0Material : Data Record 1 ('000000000009') : Version 'H4-LAMPE ' is not valid.
i have checked in transfer rule, the column Conversion is not checked. but this is disabled to check.
RSKC also does not helpfull.
in R/3 also length set to 18.
pls suggest me any solution.
Thanks
Sanjay

The issue with the data is the trailing space. SAP BW doesn't like leading or trailing spaces in the data and the routine that uses RSKC doesn't account for that. Try adding the following into your Transfer Rules:
CONDENSE field NO-GAPS.
If you're on BW 7, create a Formula in the Characteristic Rules of the Transformation for this and use the R_TRIM function.
Edited by: Dennis Scoville on Aug 27, 2009 11:30 AM

Checkbox and ORA-20507: Invalid numeric value #:# for column

Hi All,
I'm facing problems Checkboxes in a form.
I created a form and report on a table. one of the fields on the form is a checkbox and when ever I want to create a new record or update with more than one value for the checkkbox I obtain the following error:
ORA-20507: Invalid numeric value #:# for column COLUMN_NAME Where by #:# is numbers
I think the error occurs at the processes of get_pk and process_row_of_......
how should I change the processes to accommodate the checkbox values.
Kind regards
Mel

Hi Roel,
Colunm = number
LOV Definition
select product display, prod_num return from product_category_vw
where prod_num not in (select p.prod_num from product_user_tb p, user_tb u
where p.user_num = u.user_number
and u.user_name = :APP_USER)
ORDER BY 1column = number
LOV Definition
select school d, sch_id r from school_tbRegards
Mel

How to set value for Dropdown control using Querystring filter wepart

Hi,
I have a dropdown in my customized list form and need to set the value for the dropdown control using query string filter web part.
I am able to set value for textbox control using Query String Filer web part.
But, since the dropdown values are not populated on form load, the value is not set for dropdown control.
How to load the values in dropdown control on form load and set a value using Query String filter webpart?
Thanks,
dhijit

Hi,
According to your post, my understanding is that you want to filter choice field using Query String Filter web part.
To filter using query string filter web part, we can set the default value for the choice field in the query string filter web part panel as below, then connect to the list.
Now it would be filter by the value you have set.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Hello, I bought my iphone in japan. And now I'm in Brazil and I use it here, I need the unlock code for me to use here. please

Hello, I bought my iphone in japan. And now I'm in Brazil and I use it here, I need the unlock code for me to use here. please

williamjapa wrote:
Hello, I bought my iphone in japan. And now I'm in Brazil and I use it here, I need the unlock code for me to use here. please
Only the carrier to which the phone is locked can authorize an unlock. None of the Japanese carriers will do that. Sell the phone and buy one that works in Brazil.

Custom Report for the Stock and Stock value for a specific date

Hi SAP Gurus,
Is there any SAP standard t-code or any logic to get the transcations (additions (for example: Purchases) and subtractions (Sales) to the inventory) for a particular materials in a plant and with Total Stock and also Total Stock value when that particular transaction happened?
Our system is R/3 4.7
I looked at the MB5B, MBCE, MBCA, MC44, MB51 and some other standard T-codes but could not find the total stock value at the time of Transaction happened.
The history tables MBEWH and MARDH are updated after the month end closing procedures, right, which means I will have the inventory value changing every month if material has Price "S".
Thank you,
-Harter

Hi Harter,
Unfortunately, you cannot see in a single tcode the value of stock and stock quantity on a specific date. As you yourself have pointed out, we only have to make use of the history table MBEWH, MARDH for the month wise stock quantity and value. Along with that you should also make use of the table MBEW to take teh stock quantity and value. So the total value of stock on a particular date will be
Stock qnty = MBEWH value until the previous month (for teh specific valuation class, period etc) + MBEW value for the present date.
But this will nto work out if you want to find out teh stock quantity and stock value on a past date basis. For past data, only m onthwise data is available. For this anyway you can refer to MC.1 and so on reports.

Hex character value for InDesign frame break

I have been able to identify that the hex value for a carriage return in InDesign is "000D". Is there a specific hex value for InDesign's frame break character?

Through internal magic. There are more codes that are "magic" inside an InDesign document. \u0016 for example, is the code for a table, and you can search for it too. But you cannot insert a table by putting "\x16" in the Replace field. Same with anchored object -- \uFFFC -- and various other magic markers.
I promised "a tip or two" but the only way to bring a frame break in from beyond ID itself is through a Search-and-Replace in ID after you loaded your text. Insert some unique code in your software in place of these frame breaks (something simple like "{FrameBreak}" ought to do it; unless your text may already contain this particular sequence, then you have to make up something on your own), and after placing the text into ID, search for this text and replace it with the code "^R", which is "Frame Break" according to the Find/Replace Text drop down menu.

Issue in creating limits value for service PR using BAPI_REQUISITION_CREATE

HI Experts
I am creating a service PR using bapi bapi_requisition_create.I am able to create service PR successfully, but I am not able to set value for overall limit and the Expected value.
I am passing the limits values through bapi, but when I am trying to display those value in the limits tab in ME53N, it gives dump.
Please suggest how can I set the limits value.
regards
Ashwini

Could Ashwini or anyone else please suggest how this issue was resolved? I am using BAPI_REQUISITION_CREATE, but the limits I enter in the REQUISITION_LIMITS table, do not get saved, although the Purchase Requisition itself gets created.

IOException: invalid content type for SOAP: TEXT/ using Sender SOAP adapter

Hi all,
When I am using Sender SOAP adapter, i am getting (MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML using connection SOAP_http://sap.com/xi/XI/System) exception.
From my RWB I can see:
2009-05-25 16:18:39 Information The message was successfully retrieved from the call queue.
2009-05-25 16:18:39 Information The message status was set to DLNG.
2009-05-25 16:18:39 Error Failed to parse the XI system response.
2009-05-25 16:18:39 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIMessage creation failed (inbound). Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML using connection SOAP_http://sap.com/xi/XI/System.
2009-05-25 16:18:39 Error The message status was set to FAIL.
2009-05-25 16:18:39 Error Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIMessage creation failed (inbound). Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML
Please help if possible! Thanks!
Mayank

Hi,
Check in SLD your integration engine business system have the following
pipeline url : http://server:httpport/sap/xi/engine?type=entry
check Http port also
After that go to TCODE - SXMB_ADM - integrationn engine configuration and check if your server is configured as HUB with the same url or not.
Thanks
Kasturika Phukan

Finding value for a specific condition

Hi All,
I have a several Employee Numbers in my Database Table. Each Employee is having different set of Profile Numbers.
For eg. the Table Emp_Profile contains the following
Emp No ProfileNo Salary Red_Amount
1000     11     1200     430
1000     12     100     55
1000     13     120     7
1000     14     430     8
1000     15     300     40
1000     43     200     20
1000     56     100     232
1010     11     1000     300
1010     14     110     700
1010     19     200     500
1010     12     410     545
1010     13     300     54
If the Employee contains 19,45,67,89,99,24 as ProfileNo then For Each Employee reduce the Salary value for 11 ProfileNo by the Corresponding Red_Amount
Ie the Output Should be
For
EmpNo Salary
1000 1200
1010 500 (as it has 19 ProfileNo)
Please help me in doing this task.
Regards,
Gita

I used simple case.
And I used searched case.
create table empTable(EmpNo,ProfileNo,Salary,Red_Amount) as
select 1000,11,1200,430 from dual union
select 1000,12, 100, 55 from dual union
select 1000,13, 120, 7 from dual union
select 1000,14, 430, 8 from dual union
select 1000,15, 300, 40 from dual union
select 1000,43, 200, 20 from dual union
select 1000,56, 100,232 from dual union
select 1010,11,1000,300 from dual union
select 1010,14, 110,700 from dual union
select 1010,19, 200,500 from dual union
select 1010,12, 410,545 from dual union
select 1010,13, 300, 54 from dual;
select EmpNo,
case max(case when ProfileNo in(19,45,67,89,99,24)
              then 1 else 0 end)
when 1 then max(decode(ProfileNo,19,Red_Amount))
else max(Salary) end as Salary
from empTable
group by EmpNo;
EmpNo Salary
1000    1200
1010     500

How to have a common value for a column using sql loader

Hi Have a sql loader file which looks like below. But I am not getting how insert the same value for the column in all rows.
id,
crt_user_id
BEGINDATA
1;"system"
2;"system"
3;"system"
So, instead of entering the crt_user_id as system in all rows, can we place the value at the top after the column name?

Thanks Srini. your hint/suggestion helped me in finding the solution.
LOAD DATA
INFILE *
BADFILE './TEST.BAD'
DISCARDFILE './TEST.DSC'
APPEND INTO TABLE TEST_TABLE
Fields terminated by ";" Optionally enclosed by '"'
ID,
crt_user_id CONSTANT 'SOME CONSTANT VALUE'
BEGINDATA
1
2
3
so by using CONSTANT key word, we can avoid tying the same value in the data

Generating MD5 hash value for any specific flat file

Hi experts,
I am developing a program that will generate flat files and also I should generate the MD5 Hash value for each and every flat files. My question is how can I generate the MD5 hash value for the generated .txt files.
Thanks in advance
Shabir

You can use functions
MD5_CALCULATE_HASH_FOR_CHAR for text file
MD5_CALCULATE_HASH_FOR_RAW for binary

Passing and Parsing Multiple values for 1 Parameter using ASP and reportInterface.ReportParameters

Post Author: ckwizard77
CA Forum: Crystal Reports
HELP!!
I have been knocking my head against a wall trying to figure out how to pass multiple values to 1 parameter and how to add it to the parameter collection. I have code so if I pass single values for each parameter it works fine. I am passing the parmeters and values in a pipe delimited string through a url where it gets parsed and pass in here.
Any help would be greatly appreciated.
Here is the single param code:
Public Sub SetParamValues(ReportName, strParamName, ParamValue) Dim i,reportInterface, ParamName,strSubReprotName,CurrentValues Set reportInterface = reportObject.PluginInterface("") Set reportParameters = result.Item(1).PluginInterface("Report").ReportParameters For i=1 to reportParameters.Count if ReportName <>"" then strSubReprotName=reportInterface.ReportParameters.Item(i).ReportName if strSubReprotName=ReportName then ParamName = reportInterface.ReportParameters.Item(i).ParameterName if ucase(ParamName)=Ucase(strParamName) then Set CurrentValues = reportInterface.ReportParameters.Item(i).CurrentValues CurrentValues.Clear() Dim newSingleParameter Set newSingleParameter = ReportInterface.ReportParameters.Item(i).CreateSingleValue newSingleParameter.Value = ParamValue reportInterface.ReportParameters.Item(i).CurrentValues.Add newSingleParameter reportInterface.ReportParameters.Item(i).PromptOnDemandViewing=false iStore.Commit result End if End if Else ParamName = reportInterface.ReportParameters.Item(i).ParameterName Set param1 = reportInterface.ReportParameters.Item(i) if Ucase(ParamName)=UCase(strParamName) then Set CurrentValues = reportInterface.ReportParameters.Item(i).CurrentValues CurrentValues.Clear() Set newSingleParameter = ReportInterface.ReportParameters.Item(i).CreateSingleValue newSingleParameter.Value = ParamValue reportInterface.ReportParameters.Item(i).CurrentValues.Add newSingleParameter reportInterface.ReportParameters.Item(i).PromptOnDemandViewing=false iStore.Commit result End if End if NextEnd Sub

That Makes sense.
thanks a lot !
Well now are at it, mind if I ask you another quick question:
If I make an option in the multiselect list called ALL which should return all the results:
as should act like this
select * from dept;
you solution was:
select * from dept
where INSTR(':'||:P1_EMPNO||':', ':'||empno ||':') > 0
Can I modify this to return all the rows ?

Invalid values for negative counts using DAQmxReadCounterF64 for edge counting

I am seeing this issue with using DAQmxReadCounterF64 with
simple edge counting. If the counter reads a negative count value, it
returns a number that looks like an unsigned 32-bit number rolled over
(~4294967295).
I am using DAQmx v8.9.5. PXI-6602 with Windows XP, programming in C++.
Is this a bug in the driver?

Hi Mroche,
You're correct that the number you are seeing is the rollover of an unsigned 32-bit integer. Newer DAQ products use a 32-bit count register (e.g. M Series, TIO, X Series). In this register, the value -1 is represented the same as 232-1.
I wouldn't call this a bug exactly. The value you are reading is what is in the count register, and I don't think it makes sense to necessarily assume that 4294967295 should be scaled to -1 for all cases. Making this assumption would result in undesired behavior for anybody trying to count to 231 or higher (at which point the count would roll over to -231).
Having said that... position measurements are treated differently starting in DAQmx 9.0 due to the behavior reported on another thread which was in fact deemed a bug (which I notice you have seen already). The driver casts the raw count to I32 before scaling it to a position.
Now, I'm not so sure it makes sense to treat the two measurement types differently, but I think the reasoning behind the decision was that negative values make sense when talking about position, but for counting edges not quite as much (what exactly is a negative number of edges?). In the count edges case, I think it makes the most sense for DAQmx to allow the user to handle rollovers himself. At the end of the day, all the driver can do is change where the rollover occurs (either at 0 = 232 or 231 = -231).
In your case, if you want to read (-) values on your count edges task, the easiest way to accomplish this is to read the data back as U32 (DAQmxReadCounterU32) then type cast it to I32. This will give the result that I think you are looking for.
If you have any suggestions to help improve usability, please feel free to post to the DAQ Idea Exchange. Some preliminary ideas to make this experience a little more intuitive might include a property node to set how the data is cast, or perhaps have the driver cast the data to I32 if the Count Direction is set to anything other than Count Up. Although, the 2nd idea has the potential to break existing applications so it might not be as viable of an option.
Best Regards,
John Passiak

Invalid character value for cast specification using SSIS? Please assist

Similar Messages

Maybe you are looking for