Issue in creating limits value for service PR using BAPI_REQUISITION_CREATE

HI Experts
I am creating a service PR using bapi bapi_requisition_create.I am able to create service PR successfully, but I am not able to set value for overall limit and the Expected value.
I am passing the limits values through bapi, but when I am trying to display those value in the limits tab in ME53N, it gives dump.
Please suggest how can I set the limits value.
regards
Ashwini

Could Ashwini or anyone else please suggest how this issue was resolved? I am using BAPI_REQUISITION_CREATE, but the limits I enter in the REQUISITION_LIMITS table, do not get saved, although the Purchase Requisition itself gets created.

Similar Messages

Issue in creating Credit Note for road carrier invoice from SAP TM system

Dear All,
I am facing issue in creating Credit Note for road carrier invoice from SAP TM system.
The following steps I have performed:
1)
1)    1) Create Freight order with Amount 20,100
2)     2) Create Freight Settlement Doc and send it to ECC. Hence PO and SES will be created in ECC with Amount 20,100
3)     3) Invoice verification (MIRO) done w.r.t. FO in ECC with Amount 20,100 and following entries posted :
Carrier A/c - 20,100Cr
GR/IR A/c – 20,100 Dr
4)    4) Created Credit Note in SAP TM against freight order with Amount 1,010 and transfer it to SAP ECC.
5)    5) By this a new PO and SES was created with negative values (with amount 1,010) in SAP ECC
6)    6) In transaction MIRO, Credit Memo was created against the freight order.
7)    7) By this it is showing value 21,110 by adding the line items of Original Purchase Order and Credit Note Purchase Order as 20,100 and 1,010 respectively.
8)    8) By posting this following are the accounting entries which is not correct:
Carrier A/c – 21,110 Dr
GR/IR – 20,100 Cr
GR/IR – 1,010 Cr
9)    9) In report FBL1N which is showing the remaining liability of value 1,010(21,100 – 20,100) instead of 19,090 (20,100-1,010=19,090) for the carrier.
Please suggest how to resolve the issue and get the correct accounting for credit memo?
Regards,
Vibhu Gupta

Hello,
Like my reply in Linkedin group, I got the same issue and solved with BADI in TM side(REQREQ...).
Regards, Marcelo Lauria

In ID object Communication Channel - Enter a value for Service Number?

Hi,
I have completed all the steps of this link upto 4.5 > 11,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
but when i activate my messge interfarence from senario tab list or change object tab list, <b>it is showing error that :
Check Result for Object Communication Channel(GeneratedReceiverChannel_XI ) Enter a value for Service Number</b>
address type: URL Adress
target host: my bi server aibid
Service Number: ?????????
Path: /sap/xi/engine?type=entry
What is the Service NO.
Best Regards,
Dushyant.

Hi,
>>>>The serice number is ur port number. In your XI system URL http://host:port/rep/start/index.jsp
this is the j2ee port and he should put http port
as his path is: /sap/xi/engine?type=entry
on WAS ABAP I guess..
Regards,
michal

Is it possible to create Intrastat declaration for service only posted inFI

Hi
Is it possible to create Intrastat reporting for services that is only posted in FI(without PO) for Italy. If you have any idea please let me know .
Thanks
Rao

Is it possible to create Intrastat reporting for services that is only posted in FI(without PO) for Italy. If you have any idea please let me know .
Thanks
Rao

Sales Order form error "Not able to retrieve Display values for Service"

Hi,
Few of our orders flash the below error message when the order is queried
"Not able to retrieve Display values for Service"
Below are the points I observed
1.The orders I am referring to are imported order via EDI interface.
2.The service reference type code has value of ORDER, however no other service related fields (like service reference line id) have any values.
3. The item is not a service item (service tab in Item setup is disabled)
4. Same item when imported with value of "Customer Ordered" in "service reference type code" field, does not throw an error.
5. If I update "service reference type code" with value null or change it to CUSTOMER_PRODUCT, the error disappears.
Can someone explain the significance of this column value and what could have been causing this error message?
May be there are some dependent fields/setups which must have a value when service reference type code =ORDER.
Thanks in advance,
JC
Edited by: user10174990 on Oct 25, 2012 10:58 AM

Hi,
Maintain the dafault values using Tcode OISF with respective to Planning Plant you have to maintain the following values like Order Type, Main Work Center, Maint. Plant,Group,Group Counter,Business Area & Task List type.
or
Apply these OSS note 150732 / 195993.
regards,
Venkatesan Anandan

Limiting value for unplanned delivery cost

Hi,
I want to set up a limiting value for unplanned delivery cost ( Say the unplanned delivery cost should not exceed 10% of the total invoice value ).
How to achieve this functionality.
Regards,
R. Dillibabu.

Hello,
There are no checks for unplanned delivery cost and you should explore the possibility of user exits to implement this functionality.
Cheers !

Cannot create opportunity lines for an opportunity using Web Services 2.0

When working with Web Services 2.0 API every object is exposed without any child objects, this means that if we want to query/update/create/delete child objects that child object has to be exposed via WSDL.
I searched for the opportunity lines child object (also known as revenue lines) in the available WSDL's in the application and also in the documentation and I can’t find it anywhere.
I also checked the opportunity WSDL and it does not contain any reference to the opportunity lines?
How do I create opportunity lines for an opportunity using the Web Services 2.0 API???

When working with Web Services 2.0 API every object is exposed without any child objects, this means that if we want to query/update/create/delete child objects that child object has to be exposed via WSDL.
I searched for the opportunity lines child object (also known as revenue lines) in the available WSDL's in the application and also in the documentation and I can’t find it anywhere.
I also checked the opportunity WSDL and it does not contain any reference to the opportunity lines?
How do I create opportunity lines for an opportunity using the Web Services 2.0 API???

Create subordinate values for Characteristics

Hi ,
I am using BAPI to create the characteristic
    CALL FUNCTION 'BAPI_CHARACT_CREATE'
    EXPORTING
    charactdetail = gs_charactdetail
    keydate = gv_keydate
    TABLES
    charactdescr = gt_charactdescr
    charactvaluesnum = gt_charactvaluesnum
    charactvalueschar = gt_charactvalueschar
    charactvaluescurr = gt_charactvaluescurr
    charactvaluesdescr = gt_charactvaluesdescr
    charactreferences = gt_charactreferences
    charactrestrictions = gt_charactrestrictions
    return = gt_return .
But there is no way which i can create suboridinate values for (charactvalueschar) . Please let me know how can i create soubordinate values for char values
Reagrds
Ramesh

describe your problem.
It does not really matter if you use standard batch input or IDOC, both will lead to the same result.
However, object 0150 and CLFMAS are 2 different things.
0150 is characteristics while CLFMAS is classification
if you want classify with standard batch input then you should use 0130 instead of 0150.

Problem in creating new versions for existing DIR using CV01N

I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.B

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

How to create an instance for RemoteSession without using create() method

How to create an instance for RemoteSession without using create() method?

What's RemoteSession? Not in the JDK. And does the question have anything to do with concurrency?

Report name for services where used in task lists

plz let me know report name for services where used in task lists.

Hello Sairam,
I am abit confused. Are you looking for report to find where the task list is used ? You can find all the available reports in The menu path Logistics -> Production -> Master Data -> Routings -> Reporting.
If you want a specific one then please provide more details
Thanks
Amber

How to set value for Dropdown control using Querystring filter wepart

Hi,
I have a dropdown in my customized list form and need to set the value for the dropdown control using query string filter web part.
I am able to set value for textbox control using Query String Filer web part.
But, since the dropdown values are not populated on form load, the value is not set for dropdown control.
How to load the values in dropdown control on form load and set a value using Query String filter webpart?
Thanks,
dhijit

Hi,
According to your post, my understanding is that you want to filter choice field using Query String Filter web part.
To filter using query string filter web part, we can set the default value for the choice field in the query string filter web part panel as below, then connect to the list.
Now it would be filter by the value you have set.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Issue in populating Limits Value of PO in its Line item

Hi All,
    There is an issue while creating a PO from PR.
    When we change the Item Category of the line item to 'B'. it is asking to enter the Limit value in the LIMIT Tab of the item detail.
    In our example we enter expected value field say 20000.00 to check it is updating the value in the line item netpr value. Actually it is not updating the value in the line item (NETPR).
But we if you change it again with the other value in the limit tab i am able the see the changed value in the NETPR of that line item(in Table-Control).
Can any one help me on this or could you tell me where exactly the value of NETPR (line item) will get changed.
Thanks in Advance!...
Regards,
Ramkumar.K

Hi Eswar,
Thanks for your information.
My question is why it is not taking the expected value in the line item netpr for the first time.
But I am able see the expected value in the item netpr if you are changing the value of Expected value again.
Can you help me on this. Thanks!...
Regards,
Ramkumar.K

Issues in creating Java based web services with JAXB 1.0 in Jdeveloper 10 g

Hi All,
I am trying out a simple java based web service creation exercise using Jdeveloper 10.1.3.3.0.3 and JAXB 1.0. Here is what I am trying to do.
1. I have a XSD file called Status.xsd, which has three complex types in it.
2. Using Jdeveloper Tools --> JAXB Compilation, I have created Jaxb classes for the above XSD files. For each of the complex type the jaxb class generator generated on IMPL clas and one abstract class.
3. Now I have created one simple java class called Class1.java and created one method that takes the StatusImpl as input and as output for that method. Here is the code for Class1.java
public class Class1 {
public Class1() {
public StatusImpl getstatus (StatusImpl in) {
StatusImpl out;
out = in;
return out;
4. Now, I trying to create a web service for this java class from jedeveloper. I have right clicked this class and went thru the wizard Create J2EE web services.
5. At the end, the web service project got created successfully and I am trying to run this project from jdeveloper. When I run this project, I am getting the following kind of error message in the browser
It looks like when the runtime deployment classes are trying to instantiate the abstract classes instead of the impl class. and for all the complex types they trow that error and the web service could not be even invoked.
What could be the issue? Is the jaxb based web services supported with jdeveloper 10g?
Thanks,
Renga

Hi All,
I am trying out a simple java based web service creation exercise using Jdeveloper 10.1.3.3.0.3 and JAXB 1.0. Here is what I am trying to do.
1. I have a XSD file called Status.xsd, which has three complex types in it.
2. Using Jdeveloper Tools --> JAXB Compilation, I have created Jaxb classes for the above XSD files. For each of the complex type the jaxb class generator generated on IMPL clas and one abstract class.
3. Now I have created one simple java class called Class1.java and created one method that takes the StatusImpl as input and as output for that method. Here is the code for Class1.java
public class Class1 {
public Class1() {
public StatusImpl getstatus (StatusImpl in) {
StatusImpl out;
out = in;
return out;
4. Now, I trying to create a web service for this java class from jedeveloper. I have right clicked this class and went thru the wizard Create J2EE web services.
5. At the end, the web service project got created successfully and I am trying to run this project from jdeveloper. When I run this project, I am getting the following kind of error message in the browser
It looks like when the runtime deployment classes are trying to instantiate the abstract classes instead of the impl class. and for all the complex types they trow that error and the web service could not be even invoked.
What could be the issue? Is the jaxb based web services supported with jdeveloper 10g?
Thanks,
Renga

Reduce Remaining Order Planned value for services with PO

Hi guys,
I'am looking for a way to reduce the remaining or residual order plan value for a network activity with services where the amount on the PO is below the planned value. If for example the planned value amounts up to 1000 and the PO has been reduced due to negotiations to 900, a remainder order plan of 100 remains on the network activity till the activity is technically closed.
Is there a way to reduce the ROP when a PO exists for the network activity?
Thanks, Geert

We are combining an early visibility of all costs and a strict budget availability control with a formal procedure for project managers to request additional budget.
We have more and more projects where a part of the budget remains blocked in ROP for service activities because the planned value was more pessimistic than the real PO amount. Since these service activities are typically executed at the end of the project that part remains blocked. Of course the project managers want to use that marging elsewhere without having to pass a request for additional budget.
We have no issue with the network activity planned costs remaining visible, we just want the ROP to be 0 when a the purchase requisition for the service activity has been transformed into a purchase order. In the above example 100 of the budget would be freed for other use.

Issue in creating limits value for service PR using BAPI_REQUISITION_CREATE

Similar Messages

Maybe you are looking for