Invalid credentials for Asure on 2008 r2 sp1 server agent.

Server 2008 r1 sp1
created vault
downloaded server agent
downloaded vault credentials
Unblocked in properties /also tried w/out unblocking
got following error
downloaded agent and reinstalled it from link in vault
downloaded vault credentials 2 more times
result is same:
Invalid vault credentials provided. The file is either corrupted or does not have the latest credentials associated with recovery service. (ID: 34513)
We recommend you download a new vault credentials file from the portal and use it within 2 days.
E. Hansen

Hi Hansen,
Thanks for posting here!
Error: Invalid vault credentials provided. The file is either corrupted or does not have the latest credentials associated with recovery service. (ID: 34513)
Usually you get this error message while trying to register the server with incorrect time or date.
Please reset the time using “Change date and time settings …” and restart the server. Below is the detailed guidance to resolve the issue.
Please update the date and time settings by referring to
set the clock article.
Please do ensure to match the local time zone and closet time settings.
Restart the server to refresh the registration status of the server.
Please do ensure to restart the server, this is common step which can be missed.
Register the server to Azure Backup Service.
Refer to "Troubleshooting Common Configuration Issues with Azure Backup".
Hope this helps solving this issue!
Regards,
Sadiqh
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful.

Similar Messages

Backing up a windows 2008 R2 sp1 server to a NAS drive

Hi,
In windows 2008 R2 sp1 which is in a domain name xyz.com, we need to take the full backup to a shared folder in a NAS Drive which is in a workgroup ( not joined to the domain xyz)
When run the backuponce option in the windows server backup , it is getting backed up when the credentials for accessing the shared folder in a NAS Drive is provided during the time of backup.
But when scheduling the backup , I am getting the error as follows
I am using domain user id for scheduling the backup and other credentials to access the NAS shared folder
in other words how to get this option as below during the scheduling backup to exclude the above warning
Any help is greatly appreciated
Thanks & Regards S.Swaminathan Live & let others live!!!

Hi
Thanks for all for your valuable suggestion ,
At last I succeeded in configuring the scheduled backup through creating the scheduled task by creating a batch file with the following command:
net use y: \\ipaddress\sharedfolder name /username:xyz abc
Wbadmin start backup -backupTarget:\\[Server]\[Share name] -include:C:,E: -vssFull -quiet -allcritical
Variables in the command are 1.ipaddress 2.sharedfoldername 3.username 4.password 5. the drives letters 6. the mapped drive letter in the net use command
These variables have to be taken care for anybody to use
And thanks to Darren too ...... The scheduled task is to be run with the hghest privilege
username and password mentioned in the above lines are the credentials to connect to the shared folder in different NAS Drive which is located out of the domain
Thanks & Regards S.Swaminathan Live & let others live!!!

Unable to reinstall WSUS on air-gapped Windows Server 2008 R2 SP1 server

A co-worker installed WSUS on an air-gapped (not connected to the Internet) server running Windows Server 2008 R2 SP1, but he wasn't sure he'd configured everything properly, and asked me to uninstall and reinstall it. The uninstallation went without
a hitch, but reinstalling through the Server Manager gives the error message "The update could not be found. There may be a network connection issue." The Server Manager log shows the following:
8632: 2014-04-25 15:30:22.578 [Provider]                  System changed since last refresh: False
8632: 2014-04-25 15:30:29.489 [InstallationProgressPage] Loading progress page...
8632: 2014-04-25 15:30:29.520 [InstallationProgressPage] Creating WindowsUpdateDownloader.
8632: 2014-04-25 15:30:29.535 [InstallationProgressPage] Searching for Updates...
8632: 2014-04-25 15:30:29.535 [InstallationProgressPage] Starting asynchronous download.
8632: 2014-04-25 15:30:29.535 [WindowsUpdateDownloader]   Creating session.
8632: 2014-04-25 15:30:29.535 [WindowsUpdateDownloader]   Search query: 'CategoryIDs contains '4e487029-f550-4c22-8b31-9173f3f95786''
8632: 2014-04-25 15:30:29.582 [WindowsUpdateDownloader]   Searching....
8632: 2014-04-25 15:33:07.906 [WindowsUpdateDownloader]   Search failed, HRESULT: -2145107924, message: Exception from HRESULT: 0x8024402C
8632: 2014-04-25 15:33:07.921 [InstallationProgressPage] Search completed, result: Failed.
8632: 2014-04-25 15:33:07.921 [WindowsUpdateDownloader]   Sending failure DownloadComplete event.
8632: 2014-04-25 15:33:07.921 [InstallationProgressPage] Download completed, result: NotStarted.
8632: 2014-04-25 15:33:07.921 [InstallationProgressPage] Error (Id=0) Failure message: 'The update could not be found. There may be a network connection issue. <a href="WSUS.chm::/html/54a9eb1f-5dd1-42d8-ad00-dae55d7b9463.htm">Click here for
more information.</a>'
8632: 2014-04-25 15:33:07.921 [InstallationProgressPage] Invoking LoadFinishPage.
8632: 2014-04-25 15:33:07.921 [InstallationProgressPage] About to load finish page...
8632: 2014-04-25 15:33:07.937 [InstallationFinishPage]    Loading finish page
8632: 2014-04-25 15:33:07.953 [InstallationFinishPage]    Finish page loaded
Any ideas?

Hi,
0x8024402C WU_E_PT_WINHTTP_NAME_NOT_RESOLVED
Winhttp SendRequest/ReceiveResponse failed with 0x2ee7 error. Either the proxy server or target server name cannot be resolved. Corresponding to ERROR_WINHTTP_NAME_NOT_RESOLVED.
Stop/Restart service or reboot the machine if you see this error frequently.
Since the server is not connect to the internet, at least it should have an available upstream server. Did you configure it correctly? The error message indicate that the
name could not resolved, make sure you can resolve the name of the upstream server. Run nslookup check the result.
If it is the only WSUS, then give it internet connection and test.
Hope this helps.

How to move VMM 2008 R2 Sp1 server to new machine

Hello,
I need to move/migrate VMM 2008 R2 Sp1 installation (server, not database) to new machine. New machine has several different roles installed so backup/restore method is not possible. New server will have different name.There are also several Hyper-V hosts
and library servers connected to old VMM.
Do you have any good step-by-step for this?
Robert Mandziarz | IT Administrator:
CodeTwo
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer
faster.

Hi,
Thank you for your posting in Windows Server Forum.
From your description it seems that you have 50 RDS User CAL, if I am wrong then please correct it. If you are using RD User CAL then you can track per User CAL and also generate a report by
RD Licensing Manager. But for tracking RD User CAL, the system must be domain joined as it won’t work with workgroup mode. After creating report you can have the CAL details and to retain\migrate and activate again you need to contact MS clearing house.
Please check below article for more information.
Track the Issuance of Remote Desktop Services Per User Client Access Licenses
http://technet.microsoft.com/en-us/library/cc754625.aspx
Migrate Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/dd851844.aspx
Hope it helps!
Thanks,
Dharmesh

In-Place upgrade of 2008 R2 SP1 server to 2012 - 0x80070490

I'm trying to upgrade one of our fileservers to 2012 from 2008 R2 SP1. It already failed once and I was
forced to rollback to the previous version of Windows. Now, when I try I am continually getting the "Windows Setup cannot find a location to store temporary installation files. To install Windows, make sure that a partition on your boot disk has at least
1198 megabytes of free space".
The C drive has 55GB free, D drive 78GB free and E drive 255GB free.
I've tried running the setup from the command line and using the /tempdrive:<drive> switch to specify
the location the setup should place the temporary installation files but, no matter which drive I choose, I get the same error.
The only other partition is the System Reserved partition which has less than the required space. I
had a look inside this partition (by adding a drive letter to it on a temporary basis) and there is a $WINDOWS.~BT folder which contains the temporary installation files.
Is it safe to run a disk cleanup on the system reserved partition as I suspect that might allow the setup to run?

Hi,
You can perform a disk cleanup check first to see if any temp file will be listed. By default it will only list Recycle Bin in Disk Cleanup result.
If you have any feedback on our support, please send to [email protected]

Why would a SQL 2008 R2 SP2 server agent only see 40 processors when the server has 80?

The SQL Server iteslf see's 80 but the agent only 40? I thought that R2 didn't have this limitation?

Hello,
How you determined that SQL Server Agent or jobs are not seeing all cores? Please explain the issue more in detail.
Thank you in advance.
Regards,
Alberto Morillo
SQLCoffee.com

Events 1863 and 2093 post SBS 2003 SP2 Migration to 2008 R2 SP1

I have migrated AD from a 2003 SBS SP2 server to a 2008 R2 SP1 server using the following article: http://technet.microsoft.com/en-us/library/dd379526.aspx
I realize now that this was not the right article as it is for 2003 SP2 Standard, however I don't need to migrate Exchange or other applications.
That was 3 days ago, yesterday morning I noticed the following events in the 2008 error log: Error 1863 and Warning 2093
There appears to be no issue with the domain currently, everyone was able to login in without issue this morning. Both servers are continuing to run, although I plan to demote the 2003 and decommission the hardware if there are no issues (as advised by the
post-migration instructions of the above article). I don't need the 2003 SBS server anymore, should I just transfer the FSMO's now and demote the server?
I can provide full text of the events, but I have removed identifying information:
Log Name:      Directory Service
Source:        Microsoft-Windows-ActiveDirectory_DomainService
Date:          2/17/2014 4:18:14 AM
Event ID:      1863
Task Category: Replication
Level:         Error
Keywords:      Classic
User:          ANONYMOUS LOGON
Computer:     SERVERNEW.generic.local
Description:
This is the replication status for the following directory partition on this directory server.
Directory partition:
CN=Schema,CN=Configuration,DC=generic,DC=local
This directory server has not received replication information from a number of directory servers within the configured latency interval.
Latency Interval (Hours):
24
Number of directory servers in all sites:
1
Number of directory servers in this site:
1
The latency interval can be modified with the following registry key.
Registry Key:
HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Replicator latency error interval (hours)
To identify the directory servers by name, use the dcdiag.exe tool.
You can also use the support tool repadmin.exe to display the replication latencies of the directory servers.   The command is "repadmin /showvector /latency <partition-dn>".
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS KCC" />
    <EventID Qualifiers="49152">1863</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>5</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-02-17T09:18:14.599176800Z" />
    <EventRecordID>243</EventRecordID>
    <Correlation />
    <Execution ProcessID="504" ThreadID="660" />
    <Channel>Directory Service</Channel>
    <Computer>SERVERNEW.generic.local</Computer>
    <Security UserID="S-1-5-7" />
</System>
<EventData>
    <Data>CN=Schema,CN=Configuration,DC=generic,DC=local</Data>
    <Data>1</Data>
    <Data>1</Data>
    <Data>24</Data>
    <Data>System\CurrentControlSet\Services\NTDS\Parameters</Data>
</EventData>
</Event>
Log Name:      Directory Service
Source:        Microsoft-Windows-ActiveDirectory_DomainService
Date:          2/17/2014 4:18:14 AM
Event ID:      2093
Task Category: Replication
Level:         Warning
Keywords:      Classic
User:          ANONYMOUS LOGON
Computer:      SERVERNEW.generic.local
Description:
The remote server which is the owner of a FSMO role is not responding. This server has not replicated with the FSMO role owner recently.
Operations which require contacting a FSMO operation master will fail until this condition is corrected.
FSMO Role: CN=Schema,CN=Configuration,DC=generic,DC=local
FSMO Server DN: CN=NTDS Settings,CN=SERVEROLD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=generic,DC=local
Latency threshold (hours): 24
Elapsed time since last successful replication (hours): 25
User Action:
This server has not replicated successfully with the FSMO role holder server.
1. The FSMO role holder server may be down or not responding. Please address the problem with this server.
2. Determine whether the role is set properly on the FSMO role holder server. If the role needs to be adjusted, utilize NTDSUTIL.EXE to transfer or seize the role. This may be done using the steps provided in KB articles 255504 and 324801 on http://support.microsoft.com.
3. If the FSMO role holder server used to be a domain controller, but was not demoted successfully, then the objects representing that server are still in the forest. This can occur if a domain controller has its operating system reinstalled or if a forced
removal is performed. These lingering state objects should be removed using the NTDSUTIL.EXE metadata cleanup function.
4. The FSMO role holder may not be a direct replication partner. If it is an indirect or transitive partner, then there are one or more intermediate replication partners through which replication data must flow. The total end to end replication latency should
be smaller than the replication latency threshold, or else this warning may be reported prematurely.
5. Replication is blocked somewhere along the path of servers between the FSMO role holder server and this server. Consult your forest topology plan to determine the likely route for replication between these servers. Check the status of replication using
repadmin /showrepl at each of these servers.
The following operations may be impacted:
Schema: You will no longer be able to modify the schema for this forest.
Domain Naming: You will no longer be able to add or remove domains from this forest.
PDC: You will no longer be able to perform primary domain controller operations, such as Group Policy updates and password resets for non-Active Directory Domain Services accounts.
RID: You will not be able to allocation new security identifiers for new user accounts, computer accounts or security groups.
Infrastructure: Cross-domain name references, such as universal group memberships, will not be updated properly if their target object is moved or renamed.

Hi JPowered,
Thank you for posting your issue in the forum.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards,
Justin Gu

Resore SQL server 2008 SP3 database to SQL server 2008 R2 SP1

I have a dump from a SQL server 2008 SP3 server and I'm trying to restore it to SQL server 2008 R2 SP1 server but getting the error:
Msg 3241, Level 16, State 0, Line 2
The media family on device 'E:\Work\backup.bak0' is incorrectly formed. SQL Server cannot process this media family.
Msg 3013, Level 16, State 1, Line 2
RESTORE FILELIST is terminating abnormally.
Are these versions incompatible or is it just a problem with the file? If they are incompatible, I could upgrade my target server to SQL server 2008 R2 SP2, would this help?
The exact version info is as follows:
Source server: Microsoft SQL Server 2008 (SP3) - 10.0.5500.0 (X64) Sep 21 2011 22:45:45 Copyright (c) 1988-2008 Microsoft Corporation Standard Edition (64-bit) on Windows NT 5.2 <X64> (Build 3790: Service Pack 2)
Target Server: Microsoft SQL Server 2008 R2 (RTM) - 10.50.1617.0 (X64) Apr 22 2011 19:23:43 Copyright (c) Microsoft Corporation Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
Thanks in advance for your help.

SQL server 2008 SP3 is technically a lower version than 2008 R2 SP1
but it was released after it.
The service packs release date don't matter, only the major+minor build versions are important; restore should work in your constellation.
During FTP transfer the file could be damaged, that's possible. The backup file could be also "blocked" by OS because it was download from a different server; then you have to unblock it like every other download file.
Olaf Helper
[ Blog] [ Xing] [ MVP]

SQL 2008 R2 SP1 Cluster SAN Migration

Dears,
I am doubting about procedure and steps that must be followed while doing SAN Migration for my cluster 2008 R2 SP1 SQL.
For me, I already did cluster Quorum SAN Migration, but I am doubting about all remaining steps such:
Some one told me about disk signatures, what should I do for this?
What are steps for MSDTC migration?
How to Migrate SQL Instance?
What about Master and other system databases?
What about Apps Database, logs, and temps?
What about below commands: FOR WHAT IT IS NEEDED?
ALTER DATABASE
msdb
MODIFY FILE ( NAME = MSDBData,
FILENAME = '
H:\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\
MSDBData.mdf' )
ALTER DATABASE
msdb
MODIFY FILE ( NAME = MSDBLog,
FILENAME = '
H:\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\
MSDBLog.ldf' )
SELECT name, physical_name AS CurrentLocation, state_desc
FROM sys.master_files WHERE database_id = DB_ID(N'msdb');
ALTER DATABASE
model
MODIFY FILE ( NAME = modeldev,
FILENAME = '
H:\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\
model.mdf' )
ALTER DATABASE
model
MODIFY FILE ( NAME =
modellog,
FILENAME = '
H:\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\
modellog.ldf' )
Please help on this coz I am afraid about my information!

Some one told me about disk signatures, what should I do for this?
If you can present in disks from both SANs at the same time then this shouldn't be an issue. At a high-level you can add the new disks in and remove the old ones from the cluster when you're finished with them. The disks are just seen as new disks...not swapped
ones.
What are steps for MSDTC migration?
- Personally I've simply deleted and re-created the MSDTC, there might be a nicer way to do this, but re-creating it works.
How to Migrate SQL Instance?
- You mean elements that are on a SAN attached drive that aren't part of the cluster? You can stop the instance and copy the files (use
xcopy to preserve permissions), Then swap the drive letters around & restart the instance.
What about Master and other system databases?
For system databases I would
- bring the new disk into the cluster, give it a temporary drive letter, make sure sql server has a dependency on it (look at how the current drives are setup)
- stop the services
- copy the folders/files to the new drive using xcopy preserving permissions
- give the current drive an unused drive letter (via cluster manager)
change the new drive letter to match the original drive (via cluster manager)
- remove the old drive (remove dependencies before doing this)
- bring the server online
What about Apps Database, logs, and temps?
-You can do this 'online' while the sql server is running, just bring the new disk into the cluster and following the Microsoft recommended approach outlined
here
What about below commands: FOR WHAT IT IS NEEDED?
- that's for msdb and model, you'll have already handled those databases with the other system dbs.

Lots of Warning 1706 logged on VMM 2008 R2 Sp1

Hi,
I have VMM 2008 R2 Sp1 server with 3 Hyper-V hosts connected. In VM Manager event log I have noticed lots of 1706 warnings:
"Job <Id> (Refresh virtual machine) failed to complete".
Is it anything dangerous for my servers? Should I troubleshoot it?

There are also "Job <Id> (Refresh host) failed to complete" 1706 warnings logged. Could anyone help me with this? How to troubleshoot this problem?

Converting Standard 2012 r2 open volume license to Standard 2008 r2 sp1 open volume license

I have 2 Standard 2012 r2 open volume license's. I wish to convert them to Standard 2008 r2 sp1. I am presently logining into Microsoft Licensing Service Center and have pulled the product key for the 2008 r2 sp1 server. The license ID
is my open volume license ID. I know I put this into the product number upon installtion. What needs to be done next for activation.

Hi
If you have Windows Server 2012 Standard edition,you will have the right to downgrade your bits to any prior version of Enterprise,Standard or Essentials editions.
MS Article;
http://download.microsoft.com/download/4/D/B/4DB352D1-C610-466A-9AAF-EEF4F4CFFF27/WS2012_Licensing-Pricing_FAQ.pdf
Follow these steps to downgrade to a previous version of Windows Server Software
1.Obtain genuine Windows media and corresponding product key for the version of Windows that is eligible for downgrade.
The media should come from a prior legally licenced version from the OEM or Retail channels.
End users WHO are licensed separately through Microsoft Volume Licensing (VL) may provide their VL media and key to a system builder to facilitate the downgrade on their own systems.
2.Insert the downgrade-eligible version of Windows media in the CD drive and follow the installation instructions.
3.Type the product key.
If the software was previously activated,you will not able to activate it online,In this case.the appropriate local Activation Support phone number will be displayed.Call the number and explain the circumstances.When it is determined that end user has an
eligible Windows licence,the customer service representative will provide a single-use activation code to activate the software.Please note that Microssoft does not provide a full product key in this scenario.
4.Activate the software.

Explorer folder update issues Server 2008 R2 Terminal Server

Hi Folks,
We are having a few issues here. We have a cluster of 5 Server 2008 X64 R2 SP1 Terminal Servers running Citrix Xenapp 6. Our file server is a Server 2008 R2 SP1 server also. All servers are virtualised on ESX vSphere 4.0 and are connected to an EMC
FC SAN.
The users have an application which references a mapped drive (K in this example). This mapped drive is populated with contents from a network scanner. The file extensions change from PDF, JPEG, JPG and GIF. The files are stored on the 2K8 X64 R2 file server.
This all works fine, however the users are getting intermittent 'refresh' problems if you will. Sometimes after the user scans to the folder they will not see the item which was scanned however another user on the _same_ server will be able to see the item
that has just been scanned to file. If I login to the server via remote desktop I can also see the files also. It can take from 2minutes to 30minutes before the users explorer will actually refresh and be able to see the files. During this time if the user
creates a folder in the my documents which is also redirected/hosted on the 2K8 R2 file server they see the changes immediately. If the user logs in and logs out of the Terminal Server the file which was scanned is immediately available to the user.
**NOTE** this problem does not occur every time
Below is a list of the things that I have tried
Changing the Icon size and layout under explorer
Changing the layout from thumbnails to list etc
Disabled SMB 2.0
Completed SMB tuning for Xenapp and Explorer on the limit of concurrent connections etc
Disabled Windows Search
Disabled Indexing
Changed the folder to be both offline and online
Index offline and online folders
Disabled "Client for Microsoft Networks" on the network card
Disabled IPV6 on both Terminal Servers and File server
Ran filemon in compatibility mode on the file server (I can see the file being created)
I have changed the scanning location on the 2K8 R2 file server to no avail
I have checked the file share and it is indeed set to Maximum allow concurrent connections
Checked Perfmon and the disk queue is running about 0.4
I'm now at a loss.. any advise would be great! thanks folks.

Hi,
Does this issue happen on a Windows client? Like the Windows 7 and Windows XP.
Meanwhile, I would give you the following suggestions for your reference:
1.
By default, Windows Explorer generates a lot of SMB traffic - which can result in poor file server performance in some circumstances.
However, some of this traffic is superfluous and can be reduced - for example:
•Searches for Desktop.ini files used for folder customization
•Periodic refreshes of folder contents
•Searches for supporting library (.dll) files
•Individual file details and attributes pulled for each file
•Thumbnail extraction
There are some registry changes you can implement to optimize the SMB traffic being generated.
Import the settings below on client machines.
Terminal Servers running in Application Mode should be considered client machines in this scenario.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer]
"UseDesktopIniCache"=dword:00000001
"NoRemoteRecursiveEvents"=dword:00000001
"NoRemoteChangeNotify"=dword:00000001
"StartRunNoHOMEPATH"=dword:00000001
"NoRecentDocsNetHood"=dword:00000001
"NoDetailsThumbnailOnNetwork"=dword:00000001
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MRXSmb\Parameters]
"InfoCacheLevel"=dword:00000010
[HKEY_CLASSES_ROOT\*\shellex\PropertySheetHandlers\CryptoSignMenu]
"SuppressionPolicy"=dword:00100000
[HKEY_CLASSES_ROOT\*\shellex\PropertySheetHandlers\{3EA48300-8CF6-101B-84FB-666CCB9BCD32}]
"SuppressionPolicy"=dword:00100000
[HKEY_CLASSES_ROOT\*\shellex\PropertySheetHandlers\{883373C3-BF89-11D1-BE35-080036B11A03}]
"SuppressionPolicy"=dword:00100000
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer\SCAPI]
"Flags"=dword:00100c02
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager]
"SafeDllSearchMode"=dword:00000001
"SafeProcessSearchMode"=dword:00000001
For more information:
Windows Explorer and SMB Traffic
http://blogs.technet.com/b/askperf/archive/2007/09/21/windows-explorer-and-smb-traffic.aspx
2.
Please try to temporarily disable all firewall and anti-virus software to check whether this issue can be fixed.
3.
Please check if the problematic user is still on one switch. If so, I would guess there is an issue on switch.
In this case, you’re using Citrix when this issue happens. I suggest you contact Citrix engineer to particularly ask whether they saw the
similar issue running on Citrix and how to fix it.
Thanks.

SSGD 4.40.907 and SLES10-SP1 64bit - Invalid credentials while logging in

Hello everybody.
As a test, I installed SSGD 4.40.907 on a SLES10-SP1 64bit virtual operating system (it's operating using the XEN hypervisor, paravirtualized mode).
The installation went well (I had to copy old libraries - namely, libexpat.so.0.5.0 and libgdbm.so.2.0.0 - from a previous version of SLES + ldconfig) and I was able to get to the login prompt but as soon as I entered the "root" password I got "Invalid credentials".
I tried again (in my test environment, the root password is VERY simple) but no dice; I checked the root password by logging into the system using SSH and it worked fine.
I tried with different local accounts (eg, ttaserv and ttasys) but got the same message.
Please notice that, under the very same piece of HW but using a SLES10-SP1 *32bit* under XEN, everything works as expected so it seems a 64bit OS related issue.
Thanks,
Rob

Casper,
Can you please try the following.
On the protected server please try to remove the account and remove the DPM agent. Reboot, after that please manually reinstall the DPM agent on the protected server -
http://technet.microsoft.com/en-us/library/hh757789.aspx. Run the setdpmserver command and after completing successfully check the account to ensure the following.
1) It is set for the password not to expire and user cannot change password
2) Is included in the following groups, DCOM Distributed Users, DPMRADCOMTrustedMachines, and DPMRADmTrustedMachines.
If that all checks out, please goto the DPM console and tried to attach from the DPM console first and then try the powershell command if the console errors out.
Here are some other things to check as well:
Step 1) Ensure NTLM is working - UNC from DPM to PS and back
Step 2) Ensure DCOM is enabled on protected server - Type DCOMCNFG > Computers > My Computer, right click and select properties, go to Default Properties and ensure "Enable Distributed COM on this computer" is checked
Step 3) Ensure all firewalls have needed ports open -
http://technet.microsoft.com/en-us/library/hh758204.aspx
Step 4) Ensure user account is set to never expire and user cannot change password
Step 5) Try attach from DPM console first then DPM powershell
If that still does not work please ensure you are on the latest DPM patch and try again.
For DPM2012 SP1 that is DPM3.6(Note: you will need to have RU3 installed prior)
4.1.3419.0 - DPM RU3.6 - Hotfix for System Center 2012 SP1 Data Protection Manager (KB2886362)
http://www.microsoft.com/en-us/download/details.aspx?id=40318
4.1.3417.0 - DPM RU3 - Description of Update Rollup 3 for System Center 2012 Service Pack 1
http://support.microsoft.com/kb/2836751
Regards, A.Nadar, This posting is provided "AS IS" with no warranties, and confers no rights.

E6 - Mail for Exchange-invalid credentials

Hi, need some help....
After configuring my nokia E6 for Exchange mail I keep receiving a message "mail for exchange-invalid credentials". I've checked all my credentials en configuration: they are correct. I have tried the configurations on a Nokia E72 and that works perfect. Is this a known error or is there a setting I'm missing. Our company server is an Windows Small Buniness Server 2008.
I updated the firmware to version 025.007. That dit not help.

Hi, need some help....
After configuring my nokia E6 for Exchange mail I keep receiving a message "mail for exchange-invalid credentials". I've checked all my credentials en configuration: they are correct. I have tried the configurations on a Nokia E72 and that works perfect. Is this a known error or is there a setting I'm missing. Our company server is an Windows Small Buniness Server 2008.
I updated the firmware to version 025.007. That dit not help.

How do i stop workstation users from saving their network password or credentials for logging into a 2008 R2 Server workgroup?

I have a small workgroup of about 30 users that are a mix of XP Pro, 7 Pro and 8.1 desktop / laptop users that connect to a Windows 2008 R2 Server to use Quickbooks Enterprise, share files and printers. I dont want the users to be able to save their password
on their workstations, I want them to have to log in every time they connect to the server. How do I turn that off?Is the something on the server in Group Policy or a secruity setting that will not allow a saved credential for logging onto the server?

Hi,
I have a small workgroup of about 30 users that are a mix of XP Pro, 7 Pro and 8.1 desktop / laptop users that connect to a Windows 2008 R2 Server to use Quickbooks Enterprise
By connecting to the server, do you mean users log on locally or through remote desktop services, or just through network to access network resources instead of log on to the server directly?
If it’s log on locally, please disable auto logon feature by configure the registry entry
AutoLogonCount to 0, it is under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon.
If it’s remote desktop connection, please clear Logon Credentials for corresponding remote desktop sessions.
If it’s network access, then it is by design because network logon has a single-sign-on feature.
More information for you:
How to disable Auto Login?
https://social.technet.microsoft.com/Forums/windowsserver/en-US/705b0cf8-53f1-45f9-b6bf-2ba61c8d10bf/how-to-disable-auto-login?forum=winservergen
How Interactive Logon Works
http://technet.microsoft.com/en-us/library/cc780332(v=WS.10).aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Invalid credentials for Asure on 2008 r2 sp1 server agent.

Similar Messages

Maybe you are looking for