Invalid docx file format error when publishing

Good morning all,
I've been using UPK 3.5.1 Developer for years with Office 2003 (yes, I know we should upgrade, but that's out of my control), and have successfully published many times. After my latest publishing, the following error showed in the Activity Log:
Task: Job Aid / Postprocessing document
Comment: Invalid docx file format odpub://int/PlayerPackage/Temp/03d444ee-681b-406b-aba2-cd4b669702e2_JOBAID.docx
All of the other job aids have published to a .doc format, so I'm not sure why this one is behaving differently. I located the offending topic, and in UPK, the preview provides a similar error when I try to preview the job aid. Strangely enough though, in the published project, the job aid for that topic prints just fine. I know I can just ignore the error since the finished product works, but I'm just wondering if anyone has some insight as to why this error occurred.
Thanks!
Brenda Hutch

I am having the same issue. It is during export - almost immediately after exporting begins. No file is created.

Similar Messages

"unrecognizable file format" error when trying to import 5S videos onto new iMac 27"

For some reason, all of my videos I have taken the past couple months will not import onto our home Mac; getting above error codes for each one. Photos seem to import okay...usually. Any ideas? iMac is brand new and both have allo updated software. Never had this problem before...

See Here for Importing Photos:
http://support.apple.com/kb/HT4083
And Here:
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Getting an error when publishing, UPK 3.6.1

I am getting the following error on one particular topic:
Invalid docx file format odpub://int/Training Guide/Temp/User Manual - Legal & Supervision_TRAIN.docx
The rest of the topics for some reason do publish with no issues, but that one does not publish. What could possibly be the issue? Any help would be greatly appreciated! Thanks!

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Invalid File Name Errors when syncing to Ipod

Ever since an update last fall I have been getting Invalid file name errors when I try to sync my ipod. A window would pop up saying "Windows could not copy 'SONGNAME' to the iPod 'IPODNAME' because an unkown error occurred (-37)." I would press OK and another window would immediately pop up that would say, "Attempting to copy to the disk 'IPODNAME' failed. the file name is invalid or too long."
The windows would keep popping up countless times until the sync would just seem to time out and stop.
The problem songs would have no problem playing in iTunes.
Prior to the update this did not happen. No new songs were added around this time and nothing was changed to my file directory structure. I was too busy to troubleshoot this problem at the time and hoped that another update would fix it. Well, here I am many months and updates later and still no fix. After fiddling with iTunes and resetting my Ipod multiple times (goodbye saved angry bird games)I have found out that:
1. By writing down the file name when the error windows pop up I can get a partial list of the problem file names. I could not get a complete list of the problem files because the sync would time out before a full list could be compiled (the list appears to be in the hundreds).
2. If I changed the name of the file by adding OR deleting one character, remapping the song in itunes, the song would then sync properly.
3. If I changed the name of the file, remapped the location of the file within iTunes, changed the name of the file BACK to the original name that iTunes supposedly had a problem with, and then remapped the location of the song within iTunes, the song would then sync properly
4. If I moved the song to a different directory without changing the file name, remapped the song within iTunes, the song would sync properly.
5. If I moved the song to a different directory without changing the file name, remapped the song within iTunes, moved the file BACK to the original directory, remapped the song again, the song would sync properly.
6. If I renamed the file and then named it back to the original file name WITHOUT remapping the file location in iTunes, the song would still not sync properly
7. If I moved the file into a different directory and then back again without remapping the file location, the song would still not sync properly.
8. Changing or deleting the tags has no effect at all.
9. File name lengths are already under 200 characters and there are no special characters used.
So, to sum up, I have found out a way to fix the issue. The problem is, that there are hundreds of songs that appear to be affected and renaming or moving every single one individually and then remapping is extremely inefficient and ignores the cause of the problem. I also did not want to delete the itunes library and then add all of the songs back in because I have many custom playlists that I have spent hours creating and I do not want to delete them.
Is there a better way to fix the problem? Especially if someone knows the root cause?

I got a procmon log file and examined it. I have the file and I could also provide you with that or screenshots of it.
There is nothing unusual about it. I can see entires in which CR has successfully opened the report and has cached in a c:\windows\temp.
However there is one or two non-successful entries that may be related, especially that examining the stack trace brings us to a call to get_ProductLocaleID():
- A call to read reg entry HKU\S-1-5-20\Software\Business Objects\Suite 12.0\Crystal Reports\Locale fails with NAME NOT FOUND.
- immediately after that and from the same process (w3wp.ex) there is a call to open directory "c:\" which is logged as ACCESS DENIED.
Any subsequent unsuccessful calls seem to be results of exception handling in the debug code.
Does this point to any setup issues with CR? We always run the redistributable x86 runtime when installing it.

Error when publishing to file

i keep getting "an unknown error" when publishing to file or publishing all to mobileme...
It still works if i just publish to mobileme.
Any ideas?
Im trying to get my site going on go daddy, and kinda really need it in a folder...

If you are still getting the error then its likely that you have a corrupt domain file.
To prove this, quit iWeb, create a new folder on your desktop and drag your domain file out of - Home Folder/Library/Application Support/iWeb - into this.
Relaunch iWeb to force it to create a new domain file, add some content and try publishing to a folder.
If this works, your original file is corrupt.

Error message: Error loading Project _ Invalid project file format

This monring I open dvdsp project and it happen frozen. It became not responding. So I had to force quit. Now I can't open project file. The error message said "Error loading Project _ Invalid project file format". What should I do?

This isn't quite the same issue, but close enough that it must be related:
I was working on a project this morning, added a ton of subtitles and tweaked a jpeg menu (in photoshop). Saved it, closed it down without any issues, and now it won't open. The "Loading Project" box gets 1/4 of the way along and freezes on "Loading Tracks". In Activity Monitor the DSPX_Encoder services are not frozen, although not actually using any CPU power.
Needless to say I don't have a backup...... and I thought that I had achieved a lot this morning.
Solutions attempted so far:
Disconnected the external hard drive with all the assets in the hope that I could isolate a dodgy file. Masde no difference, so the problem must be within the project file itself.
Anything else to be done??

Invalid class file format... major.minor version '49.0' is too recent ...

I am using the Eclipse 3.1 and Oracel BPEL designer 0.9.13
After I created a new BPEL process (named: trybpel), I got the following output in the console:
uildfile: D:\eclipse\workspace\trybpel\build.xml
main:
[bpelc] 正在验证 "D:\eclipse\workspace\trybpel\trybpel.bpel" ...
[bpelc] error: Invalid class file format in D:\Java\jre1.5.0\lib\rt.jar(java/lang/Object.class). The major.minor version '49.0' is too recent for this tool to understand.
[bpelc] error: Class java.lang.Object not found in class com.collaxa.cube.engine.core.BaseCubeProcess.
[bpelc] 2 errors
BUILD FAILED: D:\eclipse\workspace\trybpel\build.xml:28: ORABPEL-01005
Total time: 8 seconds
I am puzzled with the information in bold. Would anyone tell me how to fix this problem? Thank you very much.

the same error ORABPEL-01005, but not the same error message,
Errors occurred when compile the bpel process using bpel designer for Eclipse:
(com.oracle.bpel.designer_0.9.13)
using PM: bpel_jboss_101200
More error infomation following:
Buildfile: E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml
main:
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: Invalid expression statement.
[bpelc] retun true;
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: ';' expected.
[bpelc] retun true;
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:208: Method setPartneLinkBinding(com.collaxa.cube.rm.suitcase.PartnerLinkBindingDescriptor) not found in class com.collaxa.cube.engine.types.bpel.CXPartnerLink.
[bpelc] __pl.setPartneLinkBinding(getProcessDescriptor().getPartnerLinkBindings().getPartnerLinkBinding(__pl.getName()));
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:584: Undefined variable: __ctx
[bpelc] __setOutgoingLinks(__sc, __ctx);
[bpelc] ^
[bpelc] 4 errors
BUILD FAILED
E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml:28: ORABPEL-01005
Error in java files auto-generated when compiling ,why?
Thanks!

EhP4 Stack file format error in xml

Hi all,
My intention is to Upgrade an sap system 4.6C to Ecc6 including EhP4.
i am running through many problems since now
Here is my newest one:
In solution manager i calculated a stack.xml. After that, i copied the files to the test system which i am upgrading. Now in phase "Stack configuration" i must provide the xml-file.
when i click next, i get an error:
The selected configuration file ("M:InstCds
w70ehp1SMSDXML_P01_20090520113757.307.xml") is not useable.
Reason: "File format error"
Update ....
OK my fault.
in SAP Note Number: 1022704 is the info that in case of start release BELOW 4.6, you cannot use the xml-file, you have to choose the txt-file
Hm .. we have 4.6 which is not BELOW 4.6 but with the txt-file is works ... now i have the next error ...
i tried different files but every time the same error ...
Any idea ?
regards,
Bjoern
Edited by: Björn Trabes on May 20, 2009 4:23 PM

Sorry,
As i wrote
Hm .. we have 4.6 which is not BELOW 4.6 but with the txt-file is works ... now i have the next error ...
is work for the txt-files in this way, that the stack can be read.
It is a little bit confusing, as the german note says: as of 4.6 and lower
but the english note says: lower than 4.6
so there is a little diffrence
But now i have the Problem, that the generated Stack-file from the solution manager is invalid:
"# Error message set: 'Stack file is invalid: keep version w/o component upgrade'"

Help - Invalid Class File Format

Got the following error when I was trying to load a JSP that imports a servlet class:
2001-08-12 03:17:12 - Ctx( /guestbook ): JasperException: R( /guestbook + /Guest
Book.jsp + null) Unable to compile class for JSPerror: Invalid class file format
: C:\tomcat\jakarta-tomcat-3.2.1\webapps\guestbook\WEB-INF\classes\com\zen\guest
book\GuestBook.class, wrong version: 46, expected 45
C:\tomcat\jakarta-tomcat-3.2.1\work\localhost_8080%2Fguestbook\_0002fGuestBook_0
002ejspGuestBook_jsp_6.java:14: Class com.zen.guestbook.GuestBook not found in i
mport.
import com.zen.guestbook.GuestBook;
2 errors
Apparently the GuestBook class is found but for some reason it couldn't be loaded/compiled by Jasper. Anybody has a clue about the "wrong version" error? Thanks a lot.

I started with JDK1.4, switched back to JDK1.3 after seeing the error but it didn't help.
The first line of installation.html says:
"Tomcat will operate under any Java Development Kit (JDK) environment that provides a JDK 1.1, JDK 1.2 (also known as Java2 Standard Edition, or J2SE) or later platform" - so I assume I don't have to go back to JDK1.2?
Thanks.

File format error for xml file

Hi!
We are trying to upgrade our SAP 4.6C to EHP4.
While "configuration roadmapstep", system asks us the XML file we have
produced via solman. When we enter the path of the file system gives theerror below:
The selected configuration file
("E:\downloadupg\SMSDXML_FKQ_20100917142727.656.xml") is not useable.
Reason: "File format error"
We have tried the txt file instead of xml file. The result was same.
You can find the details of our system.
4.6D EX2 32 bit kernel
windows 2003 64 bit OS
sql 2005 64 bit database software
We have to upgrade our system until that monday.
Please help us as soon as possible.
Best regards
Noyan Durna

Hello Noyan,
first, the official information: please refer to note #1022704 - for source release 4.6, the TXT file has to be used instead of the XML file. Otherwise, 'File format error' will occur as in your case.
But since you tried this option, you should turn your attention to the XML itself, which must contains entries that are not handled by function module OCS_GET_UPG_STACK_INFO in the 4.XX source systems. The function module only expects the entries [SPAM_CVERS], [PRDVERS] and [SWFEATURE]. Any other entries present on the file can cause an error.
Please check your file for other entries like [APP_SYSTEM], [SWFEATUREINC], [TECHUSAGES], [INITIAL_CVERS], [EXPORT_CVERS], and [DVD_SET]; this might be the cause of the error.
In order to workaround this, you can either edit the file and remove the invalid entries or recreate it (w/o this entries also).
Best regards,
Tomas Black

404 error when publishing to FTP server.

I'm getting the 404 error when publishing my iWeb site to my FTP server. Please help.
It says I have a good connection and publishes but then I get the error when I "Click to go to the site." I've read where I have to upload the file to my server but with the file index_html. Do I rename my iWeb file, domain, to index_html?

I'm getting the 404 error when publishing my iWeb site to my FTP server. Please help.
It says I have a good connection and publishes but then I get the error when I "Click to go to the site."
A 404 errors means the file is not on the server.
Checking the connection is just testing the FTP connection.
I've read where I have to upload the file to my server but with the file index_html. Do I rename my iWeb file, domain, to index_html?
Do I rename my iWeb file, domain, to index_html?
No, you don't. The domain file is where iWeb stores its assets. It stays on your computer. It has no meaning outside it. iWeb publishes the index.html file and all the other files.
Read this : The concept of iWeb Sites
So if your pages do not load, check for their presence on the server.

Java Error When Publishing

So I have an applicational prototype that I need to have out by the end of the day today, and all of a sudden Flash Catalyst states that the project cannot be published due to an error. It also said to check the Code view to see what's wrong. Yesterday it did say that the error was a "Java Heap Space" error, but today there is absolutely nothing in the problems listing even though it still outputs that there's an error when publishing the project.
The prototype builds and runs in the browser just fine, but it's publishing that becomes the problem. I am not a Flex developer by any means, but as a user experience designer, I understand how to edit some of the coding, so if anyone could shed some light on this, I will do my best to fix the problem with any solutions that will work.
I appreciate the help guys!
-- Rick

To the original poster, Rick:
If you're seeing a "Java Heap Space" error message, this is a (not very user-friendly) way of the program telling you it's running out of memory. Catalyst tries to detect and warn you when your project is getting too large, but it's not always perfect.
Did you see any warnings about the size of the images you've imported into your project? Very large images can certianly be one source of problems.
Here are a few tips for dealing with large images:
Resize them to be smaller using a another app like Photoshop, before you import into Catalyst. Shoot for a file size of 100-300 KB at the most, for very large "gallery"-style photos. Other images should be < 100 KB (remember, people viewing your site will have to download all this).
In Catalyst, when you're done shrinking down an image to the right size, choose Optimize Artwork > Rasterize in the heads-up display to "lock in" the smaller size.
In Catalyst, choose Optimize Artwork > Convert to Linked Image for any especially large photos. This can speed up the initial load time of your site, and it will also help avoid memory problems when publishing.
Hope that helps!
- Peter

WorkFlow Error when publishing

Hello,
I am having errors publishing workflows. This was working and all of a sudden stopped. From the error message I am taking it as a permissions issue?
Here is the code it spits out:
System.InvalidOperationException: Operation failed with error System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
at Microsoft.SharePoint.SPAppPrincipalManager.GetManager(SPWeb web)
at Microsoft.SharePoint.WorkflowServices.SPWebWorkflowSecurityContext.EnsureAppPrincipal(SPWeb elevatedWeb)
at Microsoft.SharePoint.WorkflowServices.SPWebWorkflowSecurityContext.<SetupApplicationEcosystem>b__3()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<Run
Anyone have any thoughts? This happens with all sorts of workflows, even basic ones as shown in the above example!
Thanks,
Will

Hi,
For your issue, Re-register the workflow service using command:
Register-SPWorkflowService -SPSite 'https://myhost/mysite' -WorkflowHostUri 'https://workflowhost' -AllowOAuthHttp -Force
Reopened SharePoint Designer again and test again.
Here are similar posts, you can use as a reference:
https://social.technet.microsoft.com/Forums/en-US/61b2cfad-355d-4a43-8dd6-7d6813cd1b2f/sharepointdesigner-error-when-publishing-a-workflow?forum=sharepointcustomizationprevious
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

FAQ: How to resolve "Unexpected File Format" error with Flash Professional CS5.5?

You may encounter errors when you attempt opening or saving files using Flash Professional CS5.5. To address the above problem, Adobe released an updater for Flash Pro CS5.5 (version 11.5.1).
The following article explains about the errors and Flash CS5.5 updater released to handle them in detail:
http://blogs.adobe.com/flashpro/2012/07/24/unexpected-file-format-error-on-opening-flash-f iles-using-flash-cs5-5/

Which operating system are you using? If you look in the Adobe Download Assistant is it still downloading the install files?

Invalid Report File Path Error

I have included several Crystal Reports as embedded resources in a Visual Studio 2010 C# project. When I try to run the application on a client PC I receive an invalid report file path error. Why am I receiving this error if the rpt is embedded in the manifest?

The following code now works on my development machine. It obtains the server name and database name from the configuration file. When I run on my client PC, however, it prompts me to log into the database. It provides the correct server name but the database name is blank and integrated security is not checked. The database name field is not enabled so I cannot provide a value.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Windows.Forms;
using CrystalDecisions.CrystalReports.Engine; //jp
using CrystalDecisions.Shared; //jp
namespace WindowsFormsApplication1
    public partial class FormRptArtist : Form
        private CrystalReport1 crReportDocument = new CrystalReport1();
        public FormRptArtist()
            InitializeComponent();
            ToolTip toolTip = new ToolTip(); toolTip.SetToolTip(btnHelp, "Flash Video Training / Help");
            helpProvider1.HelpNamespace = GlobalClass.gb_help;
        private void FormRptArtist_Load(object sender, EventArgs e)
            TableLogOnInfos crtableLogoninfos = new TableLogOnInfos();
            TableLogOnInfo crtableLogoninfo = new TableLogOnInfo();
            ConnectionInfo crConnectionInfo = new ConnectionInfo();
            Tables CrTables;
            bool repeat = true;
            while (repeat)
                try
                    crConnectionInfo.ServerName = Properties.Settings.Default.CrystalServer;
                    crConnectionInfo.DatabaseName = Properties.Settings.Default.CrystalDatabase;
                    crConnectionInfo.IntegratedSecurity = true;
                    CrTables = crReportDocument.Database.Tables;
                    foreach (CrystalDecisions.CrystalReports.Engine.Table CrTable in CrTables)
                        crtableLogoninfo = CrTable.LogOnInfo;
                        crtableLogoninfo.ConnectionInfo = crConnectionInfo;
                        CrTable.ApplyLogOnInfo(crtableLogoninfo);
                    crystalReportViewer1.ReportSource = crReportDocument;
                    crystalReportViewer1.Refresh();
                    break;
                catch (Exception exp)
                    MessageBox.Show(exp.Message);
                    DialogResult result1 = MessageBox.Show("Try Again?", "Database Connection Error",
                        MessageBoxButtons.RetryCancel);
                    if (result1 == DialogResult.Retry)
                        FormCrystalParms newWindow = new FormCrystalParms();
                        newWindow.ShowDialog();
                    else
                        repeat = false;
        private void CrystalReport11_InitReport(object sender, EventArgs e)
        private void btnHelp_Click(object sender, EventArgs e)
            GlobalClass.displayflashhelp(this, "formrptartist");
        private void crystalReportViewer1_Load(object sender, EventArgs e)

Invalid docx file format error when publishing

Similar Messages

Maybe you are looking for