Invalid GUID Strings in RDC Report Engine Merge Module

The "CrystalReports11_5_RDC_Reportengine.msm" merge module for Crystal Reports XI R2 SP6 contains some invalid GUID strings that cause validation errors for installers that include that merge module. Basically, there are three components in the merge module whose component ID GUIDs contain lower-case characters, and these lower-case characters violate Windows Installer rules as the characters should be all upper-case. These three component ID GUIDs are {C3122AE7-7812-4ab7-8187-4AFA5C3FB819}, {5CCE2FBC-BC46-4fb0-91FE-10FBA2C713DE}, and {C9105D9E-BCCD-45c1-B0B1-BB8D2382D12A}. To see the validation errors, open the merge module in Microsoft's Orca tool and run the validation command using the "Merge Module Validation Suite" option. There will be three ICE03 validation errors with messages like "Invalid GUID string (Be sure GUID is all UPPER case)..."
This problem seems to have been introduced in the CR XI R2 SP6 version of this merge module, as prior versions did not appear to suffer from it. I also checked the CR XI R2 SP6 Fix Pack 6.1 version of the merge module, and it too has the same problem.
Will the problem be fixed in the next version (Fix Pack 6.2?) of the merge module?
Thanks

Answered in this thread:
Invalid GUID strings in .NET merge modules
Locking this thread.
Ludek

Similar Messages

Crystal Reports 2008 Merge Modules SP1 Fails when installing Wise 7.0

Hello all,
We are packaging our software solution .NET 2.0 Visual Studio 2008, with Wise Studio 7.0 using Crystal Reports 2008 Merge Modules (SP1). (We use CR2008 for reporting)
There is a point (fix service) in the installation when an error message appears saying, " cannot register Businessobjects.enterprise.sdk cannot be register because of dependencies.
We have tried installing in a XP, a Windows 2003 Server, and Vista. The three of them with the same error.
Any ideas???
Thank in advance.
Adrián.-

I believe this thread will help:
warnings on build with CRRunTime_12_1.msm
Ludek

Crystal Reports XI Merge Module Error

Hi,
I am attempting to create an installer that uses the latest (CRXIWIN_SP4) Crystal Reports XI merge module (CrystalReports11_RDC_Reportengine.msm).
When the installer is run an error often occurs (it only occurs on some machines and I have so far be unable to find a pattern as to which machines it fails on):
Error 1904.Module C:|Program Files\Busines Objects\BusinessObjects Entrprise 11\win32_x86\plugins\auth\secLDAP\secldap.dll failed to register. HRESULT -2147024770.
The dll in question (secldap.dll) is present on the machine at the point where the error occurs, but further inspection seems to indicate that a dependency is missing (though it's not clear what dependency).
The readme file supplied with the merge modules would seem to suggest that this is a defect in the merge module that has been fixed (ADAPT00409449).
Any help to sort this out would be much appreciated as I've run out of ideas!
Many thanks,
Simon Clarke.

Please post this query to the Legacy Application Development SDKs forum:
SAP Crystal Reports - Legacy SDKs
That forum is monitored by qualified technicians and you will get a faster response there.
Thank you for your understanding,
Ludek

Crystal Report 9 merge Module and its service pack 7.

Hello, My application is using Crystal report 9 and have its merge modules which are integrated in Installer. It has packages: rdcdesigntime.msm, rdcruntime.msm, reportengine.msm and Database_Access.msm which are already integrated in my application Installer. There are few issues which are fixed in its service pack 7 for CR 9(File: cr90win_en_sp7.exe).
Now my Q is:
1. Are there latest merge modules for CR 9 which has changes for SP 7 also incorporated? So that I can change modules in installer itself to have changes for SP7 also.
2. I couldn't get merge modules for CR 9 even from the site. From where I can get this?

Hi Neha,
Click [here|http://resources.businessobjects.com/support/additional_downloads/runtime.asp#01] to download the availabe merge modules of CR 9.
Or
Click [here|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm] to get all the CR9 documents, mergemodules, fix packs etc. just you need to provide the "CR" as S/W product and "9" as a roduct version.
Also the Wiki [here|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsforVisualStudio.NETRuntimeDistribution-Versions9.1to12.0] is currently the best resource for CR.NET Runtime information.
Sincerely,
Amit

Crystal Reports 12 merge module fails ICE validation during installation

Hi there,
I am using the CR 2008 merge module that I downloaded from this site, and am using MSI Factory 2.0 to install my product. The ICE validation fails during the build with the following errors.
C:\v9.wxs(6680) : warning LGHT1056 : The Directory table contains a row with primary key(s) 'INSTALLDIR' which cannot be merged from the merge module 'C:\Program Files\Common Files\Merge Modules\CRRuntime_12_0.msm'. This is likely due to collision of rows with the same primary key(s) (but other different values in other columns) between the database and the merge module.
C:\v9.wxs(6680) : warning LGHT1056 : The Directory table contains a row with primary key(s) 'ProgramMenuFolder' which cannot be merged from the merge module 'C:\Program Files\Common Files\Merge Modules\CRRuntime_12_0.msm'. This is likely due to collision of rows with the same primary key(s) (but other different values in other columns) between the database and the merge module.
C:\v9.wxs(6680) : warning LGHT1056 : The Directory table contains a row with primary key(s) 'CommonAppDataFolder' which cannot be merged from the merge module 'C:\Program Files\Common Files\Merge Modules\CRRuntime_12_0.msm'. This is likely due to collision of rows with the same primary key(s) (but other different values in other columns) between the database and the merge module.
C:v9.wxs(6680) : warning LGHT1056 : The Directory table contains a row with primary key(s) 'ProgramFilesFolder' which cannot be merged from the merge module 'C:\Program Files\Common Files\Merge Modules\CRRuntime_12_0.msm'. This is likely due to collision of rows with the same primary key(s) (but other different values in other columns) between the database and the merge module.
light.exe : error LGHT0204 : ICE79: Feature 'CMS' referenced in column 'InstallExecuteSequence'.'Condition' of row 'CMSsetupConfiguration.9CED35E4_C9E6_11D3_9833_00A0C9DA4FE9' is invalid.
Any ideas what this means?
Thanks,
Rod

Hi Falk, thanks for your interest.
Yes, I can build the setup, but I need to have zero ICE validation warnings in order to pass the Vista Certification process. It seems to me that the default merge module for CR2008 has been put together in a way that fails best practice - eg. ICE validation.
The merge module is simply added to a feature within the installer product, and if I turn on the switch to "Ignore ICE warnings", then the build works OK and I can install the product no problems. However if I turn off the "Ignore ICE warnings", then the build fails and stops dead.
The snippet I posted here was from the log file.
Hope this helps,
Best regards,
Rod

Crystal Report XI merge module in the setup and deployment project VS 2005

Hello,
We've purchased and implemented Crystal Reports XI into our software.
We are working on installation of our software. We included CrystalReports11_5_NET_2005.msm into our setup package.
For English it's installs correctly. For any other language (like German) install package itself fails.
For user to see installation screens in German we created installation in German and then created transform for the language.
Install fails with the message "can't find p3smpen.dll in the package...."
This dll is related to the crystal reports. We wander if we need to include language merge modules for CR XI?
thank you

Hi,
What is the dll version of Crystal Reports?
Also give a try installing server install.
Sincerely,
Amit

InstallShield 7.0 + Crystal Report 10 merge module

I previously posted an issue on CR10, running on Vista environment. As per feedback, CR10.5 supports runtime for Vista.
Now that we have this consideration, I just wanted to know if InstallShield 7 can include CR10 (10.5 or 10.2) merge modules to its package? We don't have license to upgrade to the newer InstallShield version, so I just wanted to know first if this is possible or not.
Thanks!

Hi, Frederick;
We do not have any specific information regarding which installer products work with our Merge Modules. Previous versions of our Merge Modules have worked fine with Install Shield 7, so there is no reason why the version 10 merge modules would not work.
The best advice at this point is to try it and see. If it does not work, you can provide any error messages here, and we can do what we can to help.
Regards,
Jonathan

Deploying Crystal Reports runtime using merge module failed

Hi,
I am having a problem when deploying Crystal Reports using merge module runtime, included into MS Visual Studio web setup project, when installing my *.msi with CR runtime on a completely clean PC (with only MS Windows installed). Error: Failed to register one of the Crystal Reportsu2019 *.dll because it could not find Microsoft visual C++ runtime (msvcr71.dll was not in Windows\System32 folder)
I am using Crystal Reports runtime merge modules, which I downloaded from here: https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
I tried both cr120_mm.zip (Crystal Reports 2008) and cr121_mm.zip (Crystal Reports 2008 SP1)
cr120 could not find msvcr71.dll, cr121 could not find msvcp80.dll.
Steps to reproduce:
-          In MS Visual Studio 2008 create a new empty Web Setup Project.
-          Add Crystal Reports merge module CRRuntime_12_0.msm or CRRuntime_12_1.msm
-          Build *.msi
-          Try to install this *.msi on a completely clean PC. I tried it on Windows Server 2003 R2 SP3, which did not have msvcr71.dll or msvcp80.dll files in C:\Windows\System32 or in any other PATH folders.
-          During installation there is an error u2013 failed to register one of the Crystal Reportsu2019 *.dll
I am looking forward to hear from you.
Thank you.

I believe these threads have the answer for you:
https://forums.sdn.sap.com/click.jspa?searchID=19475295&messageID=6558989
https://forums.sdn.sap.com/click.jspa?searchID=19475295&messageID=6559113
Ludek

CRVS2010 Beta - Merge Modules

Are there merge modules for the Crystal 2010 BETA?
Where do I find the runtime files for Crystal 2010 BETA?   ...will they expire?
Edited by: Jason Everly on Apr 26, 2010 9:28 AM

Hello Jason,
For my WPF application deployment, I followed the instructions provided in the Whitepaper. Added the folowing code in the app.config file:
<runtime>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
      <dependentAssembly>
        <assemblyIdentity name="CrystalDecisions.CrystalReports.Engine" publicKeyToken="692fbea5521e1304" culture="en-US"/>
        <bindingRedirect oldVersion="14.0.2000.0" newVersion="12.0.2000.0"/>
      </dependentAssembly>
      <dependentAssembly>
        <assemblyIdentity name="CrystalDecisions.Shared" publicKeyToken="692fbea5521e1304" culture="en-US"/>
        <bindingRedirect oldVersion="14.0.2000.0" newVersion="12.0.2000.0"/>
      </dependentAssembly>
      <dependentAssembly>
        <assemblyIdentity name="CrystalDecisions.ReportSource" publicKeyToken="692fbea5521e1304" culture="en-US"/>
        <bindingRedirect oldVersion="14.0.2000.0" newVersion="12.0.2000.0"/>
      </dependentAssembly>
      <dependentAssembly>
        <assemblyIdentity name="CrystalDecisions.Windows.Forms" publicKeyToken="692fbea5521e1304" culture="en-US"/>
        <bindingRedirect oldVersion="14.0.2000.0" newVersion="12.0.2000.0"/>
      </dependentAssembly>
    </assemblyBinding>
</runtime>
<startup>
    <supportedRuntime version="v2.0.50727"/>
    <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
But as soon as I compile or re-open the project, I get this weird error message from Windows: "svhost.exe has stopped working!!!!!" and Visual Studio completely crashes. To solve this problem I had to comment these lines and got it working again in the development environment. The thing is, I need to be able to deploy this application, is this possible today?
Do I actually need to install Crystal Reports 2008 Merge Modules as well as Crystal Reports for 2010 in my development machine? Is "supported runtime "v2.0.50727"" line needed?
Edited by: Mariano Peinador on Apr 26, 2010 7:13 PM
Edited by: Mariano Peinador on Apr 26, 2010 7:14 PM

Crystal 2008 Merge Module SP 2.2 - SP 3.0 Cannot Rebuild Setup Program

I have a project that did use Crystal Reports 2008 Merge Module sp2.2. We upgraded to Merge Module CR 2008 sp3.0 hoping for speed improvements. So far we cannot even build the setup program. The Installer is referencing CR 2008 sp2.2 AND CR 2008 sp3.0 merge modules now and then generates an error stopping the build process. We have gone through every referenece and even went so far as to delete the sp2.2 merge module. The installer still tries to add it. We have removed and replaced all referneces in the program for Crystal. Still same problem. We have been working with Installshield for 2 weeks on this problem but still no resolution. We had a terrible time figuring out all the dependencies for the CR 2008 sp 2.2 originally and eventually had to pay for Crystal support to even get this to work. I am very surprised at how hard it is to use Crystal Reports in a VB.Net project. Please help.
Edited by: maintsmart on Jul 8, 2010 1:57 PM
Edited by: maintsmart on Jul 8, 2010 1:59 PM

Hi,
WRT InstallShield, what version of InstallShield do you use and what type of project is it - InstallScript or MSI? There's an aritcle here on a couple of possible solutions for -5037 http://kb.flexerasoftware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=Q109144&sliceId=
I've also seen a comment to turn off .NET dependency scanning for the components in the project, and add the components back in manually, to workaround the error.
For each new release of a Crystal merge module I replace the merge module in the location where the merge modules are held (e.g. C:\Program Files\InstallShield\2010\Objects), and then open my InstallShield MSI project, deselect the merge module in the Redistributables view and then reselect the merge module which refreshes the references to the merge module in the project. That said moving from CR2.2 to SP3 the merge module filename has changed so for SP3 this will be listed as a seperate Redistributable (or Object in InstallScript), but I've already built a setup using this without any issues, using this method of deselecting / reselecting the merge module.
WRT the Visual C++ libraries, I have to edit the Crystal merge module to change the ModuleDependency ModuleLanguage to language independant in order for the build to be successfull (as per this lengthy forum posting here 2008 SP1 Merge Modules). I'm sure you've already gone through all this pain!
Peter.

I need Crystal Reports XI R2 RDC merge modules with JDBC driver.

I successfully connected to MySQL server from CR XI R2 designer with JDBC driver. My application is developed in Delphi, using Crystal Reports VCL. I need to build a Installer including executable files, *.rpt files and CR RDC merge modules in Macrovision Installshield 12. But RDC_reportengine is not containing JDBC driver. How I to include and configure the JDBC driver?

I just done these steps. But following error occurs:
Error: 772 error in file C:\...\myreportfile.rpt:
Invalid argument for database.
Execute <PEStartPrintJob>.
I used mysql-connecter-java-5.1.7-bin.jar from mysql.com.
In designer connection url is
jdbc:mysql://mysqlserver/database
database classname is
com.mysql.jdbc.Driver
My Calling the report code from Delphi is:
CrystalReport.Connect.ServerName := servername;
    CrystalReport.Connect.UserID := username;
    CrystalReport.Connect.Password := password;
    CrystalReport.Execute;
It is worked successfully on installed the CR designer PC.

Crystal Reports XI Release 2 SP4 RDC Merge Module

I've been trying to find the RDC Merge module for Crystal Reports XI Release 2 SP4 and cannot find it. I found a link - https://smpdl.sap-ag.de/~sapidp/012002523100009381702008E/crxir2sp4_rdc_mm.zip - but when I navigate there I get an error "Error Message - ObjectID not existant". Does anyone know where I can get this from?

I couldnt find the SP4 RDC however there is a crxir2_fp55_rdc_mm.zip released on 06/07/2009, which can be found at
[https://smpdl.sap-ag.de/~sapidp/012002523100008181452009E/crxir2_fp55_rdc_mm.zip]

Invalid guid error looking up EJB from a startup class

Gentlemen,
I am receiving an "invalid guid at GDS" error that is similar to others reported at:
http://softwareforum.sun.com/servlet/ProcessRequest?RHIVEID=181&RPAGEID=135&HOID=50B500000008000000FE090000&UCATEGORY_0=_29_%24_24_6_&UCATEGORY_S=0
and
http://softwareforum.sun.com/servlet/ProcessRequest?RHIVEID=181&RPAGEID=135&HOID=50B500000008000000FE090000&UCATEGORY_0=_29_%24_24_6_&UCATEGORY_S=0
In my case, I can retrieve the EJB from my rich client with no problems. However, if I execute the exact
same code from within a startup class (i.e. com.iplanet.ias.startup.StartupClass) then I get the following error repeated until memory runs out:
javax.naming.NameNotFoundException: MessageRepositoryBean : Invalid guid null in
GDS
at com.netscape.server.ejb.EjbContext.lookup(Unknown Source)
at com.netscape.server.jndi.RootContext.lookup(Unknown Source)
at com.netscape.server.jndi.RootContext.lookup(Unknown Source)
at javax.naming.InitialContext.lookup(InitialContext.java:357)
at com.netscape.ejb.CorbaHomeFactoryImpl.ConstructEJBHome(Unknown Source
at com.netscape.CosNaming.NamingContextImpl.resolve(Unknown Source)
at org.omg.CosNaming._NamingContextImplBase.invoke(_NamingContextImplBas
e.java:233)
at com.sun.corba.ee.internal.corba.ServerDelegate.dispatch(ServerDelegat
e.java:236)
at com.sun.corba.ee.internal.iiop.ORB.process(ORB.java:227)
at com.sun.corba.ee.internal.iiop.CachedWorkerThread.doWork(IIOPConnecti
on.java:262)
at com.sun.corba.ee.internal.iiop.CachedWorkerThread.run(IIOPConnection.
java:230)
javax.naming.NameNotFoundException: MessageRepositoryBean : Invalid guid null in
In previous answers people have suggested adding various things to the app server classpath. This does not make any difference for me. I am puzzled why code runs fine in a normal rich client, but not in a startup class. Here is the code that I am running:
try
String contextFactory = "com.sun.jndi.cosnaming.CNCtxFactory";
String providerURL = "iiop://localhost:9010";
Properties p = new Properties();
p.put(Context.INITIAL_CONTEXT_FACTORY, contextFactory);
p.put(Context.PROVIDER_URL, providerURL);
Context context = new InitialContext(p);
MessageRepositoryHome home = (MessageRepositoryHome)
PortableRemoteObject.narrow(context.lookup("ejb/MessageRepository"), MessageRepositoryHome.class);
MessageRepository repository = home.create();
catch(Exception e)
e.printStackTrace(Log.err);
System.exit(1);
Thanks for your help,
Mark

I was mistaken in this posting. I was able to access the EJB from the startup class so there must be something else that I am doing to cause this problem. I'd still like to know why I get those invalid guid errors though.
By the way, please forgive me for using the gender-specific gentlemen in my posting. That was accidental.

Report Engine rwEng-0 crashed when server startup

I installed 9ias on RedHat Linux, and applied the latest patches(Core patch 2, NT patch 1, form&report patch 2).But when I start the report server(in-process server).
The report server's log shows:
** 2003/5/19 8:51:9:297 -- Reports Server is starting up
*** 2003/5/19 8:51:24:418 -- Reports Server started up engine rwURLEng-0
*** 2003/5/19 8:51:31:892 -- Reports Server started up engine rwEng-0
*** 2003/5/19 8:51:32:956 -- Engine rwEng-0 crashed
Then I run a report with the web browser, after single sign-on login interface, the browser is hang, then shows
REP-51026: No output for job 19
Some new lines append in the log file:
*** 2003/5/19 9:7:2:980 -- Reports Server started up engine rwEng-0
*** 2003/5/19 9:7:9:633 -- Reports Server started up engine rwEng-1
*** 2003/5/19 9:7:15:994 -- Reports Server started up engine rwEng-2
*** 2003/5/19 9:7:23:226 -- Reports Server started up engine rwEng-3
*** 2003/5/19 9:7:30:328 -- Reports Server started up engine rwEng-4
*** 2003/5/19 9:21:24:827 -- Reports Server shut down engine rwURLEng-0
*** 2003/5/19 9:21:30:413 -- Reports Server started up engine rwURLEng-0
I sent the request again, the browser shows:
REP-50125: Caught exception: org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
Anyone can help me?

Thanks for your advice,I try it , when startup, no error in the reportserver.trc file, but when I send a request from the web , it shows:
[2003/5/20 2:59:7:975] Debug 56031 (ConnectionImpl:runJob): Job 1 is waiting for
notification
[2003/5/20 2:59:8:919] Info 56020 (EngineManager:spawnEngine): Launching engine
rwURLEng-0
[2003/5/20 2:59:8:919] Debug 50103 (EngineManager:spawnEngine): Start engine com
mand line = /oracle/product/app/bin/rwengine.sh -cp /oracle/product/app/j2ee/hom
e/lib/ojsp.jar:/oracle/product/app/reports/jlib/rwrun.jar:/oracle/product/app/jl
ib/zrclient.jar -XX:+AllowUserSignalHandlers -XX:CompileThreshold=20000 -Xmx128M
oracle.reports.engine.RWEngine name=rwURLEng-0 server=rep_app_server ORACLE_HOM
E=/oracle/product/app engineimplclass=oracle.reports.urlengine.URLEngineImpl tra
ceopts=trace_all tracefile=/oracle/product/app/reports/logs/rep_app_server-rwURL
Eng-0.trc tracemode=trace_replace cacheDir=/oracle/product/app/reports/cache
[2003/5/20 2:59:8:969] Info 56021 (EngineManager:spawnEngine): Engine rwURLEng-0
has been launched
[2003/5/20 2:59:8:970] State 56004 (EngineInfo:setState): Engine rwURLEng-0 stat
e is: Initial
[2003/5/20 2:59:19:841] Exception 50125 (exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=55103,
java.lang.String errorString="API URLEngine:getEngineEnvs not applicable to URL
engine",
java.lang.String moduleName="REP"
at oracle.reports.RWExceptionHelper.read(Unknown Source)
at oracle.reports.engine._EngineClassStub.getEnvs(Unknown Source)
at oracle.reports.server.EngineManager$TimedPingerThread.run(EngineManag
er.java:1581)
): Internal error exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=55103,
java.lang.String errorString="API URLEngine:getEngineEnvs not applicable to URL
engine",
java.lang.String moduleName="REP"
[2003/5/20 2:59:19:842] Warning 50103 (EngineManager:registerEngine): REP-55103:
API URLEngine:getEngineEnvs not applicable to URL engine
report_server.log shows:
*** 2003/5/20 2:56:53:703 -- Reports Server is starting up
*** 2003/5/20 2:59:19:842 -- Reports Server started up engine rwURLEng-0
*** 2003/5/20 2:59:25:94 -- Reports Server started up engine rwEng-0
*** 2003/5/20 2:59:26:164 -- Engine rwEng-0 crashed
*** 2003/5/20 2:59:32:439 -- Reports Server started up engine rwEng-0
*** 2003/5/20 2:59:35:302 -- Engine rwEng-0 crashed
*** 2003/5/20 2:59:42:88 -- Reports Server started up engine rwEng-0
*** 2003/5/20 2:59:44:472 -- Engine rwEng-0 crashed
I still get "REP-56048: Engine null crashed, job Id: 1
" on the web.

Report Engine SDK: CommunicationException when accessing IReportEngine members

Hello,
I have installed BOXI 3.1 SP3, including the .NET SDK, and I am trying to use the Report Engine SDK part to navigate through a WebIntelligence document (analyse its structure, etc.), via a Console App.
I built my console app targeting .NET framework 3.5, and compiled it in 32 bits mode (x86 platform). I can access the standard SDK without any problem and log in to the CMS then retrieve any InfoObject instances from my enterprise server.
My problem occurs when I try to access my BusinessObjects.ReportEngine.IReportEngine instance's members. Sample lines of code:
SessionMgr sessionManager = new SessionMgr();
EnterpriseSession session = sessionManager.Logon(login, password, cmsName, authType);
InfoStore infoStore = (InfoStore)session.GetService("InfoStore");
UserInfo userInfos = session.UserInfo;
string logonToken = session.LogonTokenMgr.CreateWCAToken("", 1, -1);
ReportEngines reportEngines = new ReportEngines(logonToken);
IReportEngine reportEngine = (IReportEngine)reportEngines.getService(ReportEngineType.WI_ReportEngine);
bool test = reportEngine.IsReady; // or any other member of reportEngine, like reportEngine.OpenDocument(...)
An exception of type 'BusinessObjects.ReportEngine.CommunicationException' occured.
Message:
The Web Intelligence server could not be reached. Contact your Business Objects administrator. (Error: RWI 00236), Session Init Failure,
Stacktrace:
   à BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerStub.Connect(Boolean forceNewInstance)
   à BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerStub..ctor(OCCAServerConnection connection, Boolean forceNewInstance)
   à BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerConnection.get_Stub()
   à BusinessObjects.ReportEngine.WI.Internal.Server.ServerCaller.SetupStub()
   à BusinessObjects.ReportEngine.WI.Internal.Server.ServerCaller..ctor(IServerSession session, IServerProtocol protocol, IServerConnectionInfo info)
   à BusinessObjects.ReportEngine.WI.Internal.WIDocumentInstance..ctor(WIReportEngine engine, Int32 documentId, OpenDocumentParameters parameters)
   à BusinessObjects.ReportEngine.WI.Internal.WIDocumentInstance..ctor(WIReportEngine engine, Int32 documentId)
   à BusinessObjects.ReportEngine.WI.Internal.WIReportEngine.GetAnyServerInstance()
   à BusinessObjects.ReportEngine.WI.Internal.WIReportEngine.get_IsReady()
What do you suggest?

Hi,
Enterprise / ReportEngine SDK is not supported / tested / compatible with desktop / console apps.
Could you try the same logic with a web services sdk, as WebServices SDk is the only SDK which could be used to develop thick client apps.
- Bhushan
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.

Invalid GUID Strings in RDC Report Engine Merge Module

Similar Messages

Maybe you are looking for