I need Crystal Reports XI R2 RDC merge modules with JDBC driver.

I successfully connected to MySQL server from CR XI R2 designer with JDBC driver. My application is developed in Delphi, using Crystal Reports VCL. I need to build a Installer including executable files, *.rpt files and CR RDC merge modules in Macrovision Installshield 12. But RDC_reportengine is not containing JDBC driver. How I to include and configure the JDBC driver?

I just done these steps. But following error occurs:
Error: 772 error in file C:\...\myreportfile.rpt:
Invalid argument for database.
Execute <PEStartPrintJob>.
I used mysql-connecter-java-5.1.7-bin.jar from mysql.com.
In designer connection url is
jdbc:mysql://mysqlserver/database
database classname is
com.mysql.jdbc.Driver
My Calling the report code from Delphi is:
CrystalReport.Connect.ServerName := servername;
    CrystalReport.Connect.UserID := username;
    CrystalReport.Connect.Password := password;
    CrystalReport.Execute;
It is worked successfully on installed the CR designer PC.

Similar Messages

Crystal Reports XI Release 2 SP4 RDC Merge Module

I've been trying to find the RDC Merge module for Crystal Reports XI Release 2 SP4 and cannot find it. I found a link - https://smpdl.sap-ag.de/~sapidp/012002523100009381702008E/crxir2sp4_rdc_mm.zip - but when I navigate there I get an error "Error Message - ObjectID not existant". Does anyone know where I can get this from?

I couldnt find the SP4 RDC however there is a crxir2_fp55_rdc_mm.zip released on 06/07/2009, which can be found at
[https://smpdl.sap-ag.de/~sapidp/012002523100008181452009E/crxir2_fp55_rdc_mm.zip]

Crystal Report (9.0 - RDC] on Vista

I think i have not expressed myself appropriatly
(the last thread).
I have problems when i use Crystal Reports 2008,
CrystalDecisions.Shared.ConnectionInfo and CrystalDecisions.ReportAppServer on Vista .
But i haven't problem when i use Crystal Report (9.0 - RDC) on Vista.
(Interop.CRAXDDRT / Crystal Reports 9 ActiveX Designer Design and Runtime Library).
¿?It's supported¿?(vista)
What kind of problems can I find, if i use Crystal Reports(9.0-RDC) on Vista?
(now i haven´t)
Regards
(sorry, my english)
Ismael Ramírez
Edited by: Ismael Ramirez Rodriguez on Oct 2, 2008 1:13 PM
Edited by: Ismael Ramirez Rodriguez on Oct 2, 2008 1:15 PM

Dear Amit,
Sorry, but I think I'm still not expressing appropriately. Let me try once again.
OK, I know that CR2008 does not support RDC. Actually we are planning to migrate to CR2008 using the new NET libraries.
However, we have tested CR9.0(RDC) in Vista and we find that it works OK so far. My question is: is CR9.0 (RDC) "officially" working in Vista? Shall we find any compatibility problem for some Vista installation?
What I would like to know is whether our current software, that still uses CR9.0(RDC), shall work fine on any Vista platform or not.
Hope that I had expressed better this time !!

Does end user need Crystal Reports to run saved reports

This seems like such a simple question, but I am unable to find the answer in the documentation, so here it goes.
On UCCX does end user need Crystal Reports to run save custom reports that were created using Crystal Reports

Hi
No, UCCX comes with the 'Historical Reporting Client' which contains a Crystal runtime that renders the reports.
You only need Crystal Pro if you wish to author new reports for the system.
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts...

Salesforce and Crystal Reports XI Release 2 Full build with Service Pack 2

Hi
I need to install 'Crystal Reports XI Release 2 Full build with Service Pack 2' (CR XI R2 SP2) on a new computer but can't find the exe/zip file used previously to do that.
The reason I need that particular version is because (as I understand it) its the version needed to interface with our Salesforce application.
I have the CRXI original disks and keycode but as I understand it no manner of patching with SPs will get me to CR XI R2 SP2.
I've tried various searches and frustratingly come up with only dead links (old BO forums and SAP forums).
Is there a live link somewhere that I can use, or will a later version do the job?
For example, alternatively, will I be able to use the CR XI R2 SP4 file instead?
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
Thanks for your help.

Post Author: ejthunder
CA Forum: Deployment
Hello,
Crystal Reports XI and XI R2 are not supported on 64 bit machines. I have not heard of any plans to change this. As you've discovered - the only version of Crystal Reports that is supported on a 64 bit machine is CR.NET 2005 (v10.2), the version that ships with VS2005.
Your options are to downgrade your application to use bundled CR.NET 2005 or to deploy your CR XI R2 .NET application to a 32 bit machine.
EJ

After installing Crystal Reports XI on Windows 2003 server with one error..

After installing Crystal Reports XI on Windows 2003 server with one error... REGSVR sapldap.dll error. I had to regsvr it manually. Crystal still didn't run. Found out that Crystal Reports XI will not run until you change DEP to protect only windows program and services. Thanks.

Thank you for sharing your finding. Very much appreciated.
The DEP is a known issue and it is documented in [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Crystal Reports XI was not compiled with the nx flag as it released before Windows XP Service Pack 2 or Windows 2003 Service Pack 1.
As for the sapldap.dll. I'm not sure where this is coming from. I do not see this dll on my install, however it does come with the SAP portal integration kit. So I'm not sure if that is flying around somewhere on that server(?)
Ludek

VB6 Crystal Reports 8.5 - RDC Component to Export Reports To Printer

Hi,
We have an application written in VB6 that uses the RDC in Crystal Reports 8.5 to export reports the printer. We are currently making some security changes to lock down several of our servers. Currently our custom print queue for Crystal runs in windows services as administrator. All the printers are installed as administrator. As soon as we change our application to run as a different account (ie. CrystalService) it no longer can find the printers. I was wondering if there is a way for the windows service to recognize the printers installed as administrator without re-installing all printers on all servers as the new user Crystal Service.
Thanks for your help and let me know if I can add anything to clarify the situation.

Hi Chris,
Other than re-installing under the new user account you can search Microsofts web site on how to change printer permissions. There is an article there that explains how to copy the Printer registry keys into the local user account.
Then it should all work for you, this is all a Windows permission issue, not a Crystal Reports Issue.
Thank you
Don

Crystal Report XI R2 - RDC supported on Windows 64-bit

Hello!
We are using Crystal Report XI R2 runtime RDC component on Windows 32-bit platform.
Is the RDC supported on Windows 64-bit platform?
Best regards,
A.

Hi Alessandro,
The version of Crystal Reports that comes with MS Visual Studio .NET, which is CR version 10.x, is 64 bit but is quite limited in it's functionality. Only some export types and database drivers are supported. It basically only allows you to view reports, no RCAPI functionalty at all.
I suggest not going that way. RDC is not 64 bit at all, it's old COM engine and will not work in 64 bit mode as I said above. The RDC is not supoorted using .NET also.
Thank again
Don

I need Crystal Report 2008 SP4 Fix Pack 4.1, 4.2, 4.3, 4.4 ....

Kindly help I need to download these SP4 Fix Pack 4.1, 4.2, 4.3, 4.4 for Crystal reports 2008.
Thanks in advanced
Regards,
Eng Hok

Hello Eng,
I believe this is the page which you are looking for:
http://service.sap.com/swdc
"Analytics Solution" on the top menu
"A - Z Index" on the left menu
Select 'C' from the list
CRYSTAL REPORTS
CRYSTAL REPORTS 2008 V1
Select "Support Packages and Patches" from the right menu
In the popup select CRYSTAL REPORTS 2008 V1
Windows Server on IA32 32bit
In the appearing list you can select the items "CR 2008 SP4 FixPack 4.1", etc.
Regards,
Laszlo

Need Crystal Reports Excel Export Compatibility Patch

I seached the threads and found that the person that started this thread:
Crystal Reports.NET Export to Excel
has the same issue/needs that I do. We have over 1000 crystal reports all written in 8.5. We MUST have the ability to export them accurately to Excel in the clean manner in which they were exported back in version 8.5. Apparently (for whatever reason) you guys have gone away from the old methodology of exporting to Excel, however I read that there is a compatibility patch that can be provided that would allow me to be able to export the reports to excel the way it use to work. What do I need to do to aquire this patch? Thanks.
Steve

Thanks Don for you reply. I noticed you said this was low priority for him, but to us it's a major priority as I said, one of our biggest clients is very upset about it and we need it fixed asap.
I understand what you are saying when you say that we "had 10 years to update it." However, please understand from our vantage point. We didn't upgrade b/c you're user license agreements were so expensive for us until you recently reworked it so as to be affordable. So we couldn't upgrade until recently. So now we "upgraded" to a newer version of Crystal which usually means things are enhanced and work better. However, in this case the newer version is causing us major problems in an area that use to work great. So we're finding it hard to blame ourselves for this.
I guess I am ignorant as to why SAP would go to an entirely different exporting methodology when the old methodology was working so well.
Anyway, thanks again and anything you can do to speed up the process of getting us a patch would be greatly appreciated.
Steve

I need crystall report print button support insted of exporting to pdf then print

Crystal reports are the most widely used reporting software.its print button is working on active X controls. due to the i am not able to use direct print button.
so please help me to provide a plugin for crystal report

Here is C# code for print crystal report
cryRpt.PrintToPrinter(2, true, 1, 2);
check this it will help you to print crystal reports
http://csharp.net-informations.com/crystal-reports/csharp-crystal-reports-print.htm
It may help you.
merca.

Crystal Reports XI R2 SP 6 - Issue with setting Data Source Location

Hello,
After some initial difficulty instally CR XI R2 with SP 6 on a windows XP machine (see thread Error on installation of CR XI R2 SP6), the Crystal Reports environment seemed fine, however, when I tried resetting the datasource location on an ODBC datasource between a development and production server, I get the message 'Some Tables could not be replaced as no match was found....'   The tables in the two databases are identical so that isn't the issue.
Here is some additional information
The issue seems related only to DSN's that point to a progress database. I am able to reset datasource locations for DSN's that use the SQL server driver and also for those that use the XML CR ODBC XML Driver 5.0. I am not able to reset the datasource locations on the DSN's that use a Progress Open Edge 10.1 DB driver.
I can create a new report using the DSN for the Progress Driver and add tables, but the table names are coming up as an alias - i.e. if I add a table called PM_Plant, the table added to the report is PM_Plant1.
I also found I can go into existing reports, rename the tables in the database expert to be an alias (appending 1 to the end of the table name), then I am able to repoint them using the datasource location screen.
So it looks like there is a potential work around to the situation, but I didn't run across any information that we should need to do that.
Any recommendations how to fix the issue?
Thanks,

Hi Don,
The reports were created with CR XI R1 on my PC initially and the progress drivers have not changed since.   The reports were deployed to a server and I pulled them back to my PC to test out any changes after the CR XI R2 SP 6 upgrade. (so there is really only one machine involved, the one that had the upgrade).
I did look at the settings for verifying and tried playing around with those and also with verifying the database but that didn't make any difference.
I wasn't quite sure which registry keys to look at or what the values should be so wasn't able to pursue that option.
All the tables in the progress database use underscores as part of the table name (i.e. PM_Plant, PM_Company), do you think the upgrade to SP6 means that the underscore is now a reserved character and that is why the tables are getting aliased? If so, do you know how to change the alias settings or the list of characters that are reserved?
Just an FYI, I had to downgrade back to CR XI R1 at this point to get work done.   If time allows, I'll retry the upgrade in about 5-7 weeks. I discussed the issue with a system admininstrator and we willl try removing the progress drivers and DSN's prior to trying an upgrade again to see if that makes a difference. I'll also make sure to keep track of all Report Options and Options and also registry keys to see what changes.
Thanks

Crystal Reports Based on SAP Function Module and Transperant Tables

Hi,
I need to develop reports based on SAP trasperant tables and to filter the records I require to use one of the function module in SAP.
I have created parameters in Crystal reports that are required for the function to execute and are included in the where clause of the query. This helped the fuction to get those parameters and execute it.
The thing is that the fuction works fine with one set of parameters and gives accurate results both in SAP and Crystal Reports.
But fails for other set of parameters.
It works fine when we directly execute function in SAP produces a record set. But, when we pass those parameters from Crystal Reports it fetches no data.
Can anybody tell me the exact procedure to use function module and transperent tables together in Crystal Reports ?
Thanks in Advance.
Niwas Joshi

Hi,
This is going to be hard to explain, however you need to recognize that the function has input and possibly output (export) parameters. Crystal Reports is able to work with these parameters. However it is up to you to figure out how these parameters are used effectively to give you the correct results when joining the function with other data sources such as transparent tables.
If you're using transparent tables and functions in a Crystal Report, then you need to link these objects in such a way so that a left outer join for example is using the function's output parameters to join to the transparent table equivalent fields. However if the table is the starting point then the joins from the table should join the Input parameters of your function.
you can set these joins in the Database menu | Database Expert | Links of Crystal Reports.

Crystal Reports's JRC. How to close JDBC connection?

Hi!
I have simple CR JRC application under Oracle AS 10.1.2.0.2, made from Crystal's sample codes.
It works fine, but there is little problem: after closing vievwer's page JDBC connections stays alive.
How can I close them?
Here is my 2 jsp:
---------- Page1.jsp -----------------
"<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@page import="com.crystaldecisions.reports.sdk.*" %>
<%@page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
<%@page import="com.crystaldecisions.report.web.viewer.*"%>
<%
// open the report rpt file
String REPORT_NAME = "directs_q_d1.rpt";
String Login =request.getParameter("p1");
String Password =request.getParameter("p2");
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(REPORT_NAME, 0);
reportClientDoc.getDatabaseController().logon(Login,Password);
ParameterFieldController paramFieldController = reportClientDoc.getDataDefController().getParameterFieldController();
paramFieldController.setCurrentValue("", "reportname", new String("DIRECTS_QUARTERLY"));
session.setAttribute("reportSource", reportClientDoc.getReportSource());
reportClientDoc.close();
response.sendRedirect("CrystalReportViewer.jsp");
%>
and
----------- CrystalReportViewer.jsp ------------------------
<%//Crystal Report Viewer imports.%>
<%@page import="com.crystaldecisions.report.web.viewer.*"%>
<%@page import="com.crystaldecisions.reports.sdk.*" %>
<%
//Refer to the Viewers SDK in the Java Developer Documentation for more information on using the CrystalReportViewer
//API.
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setOwnPage(true);
viewer.setOwnForm(true);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
viewer.setHasRefreshButton(false);
viewer.setEnableDrillDown(false);
viewer.setDisplayGroupTree(false);
viewer.setHasToggleGroupTreeButton(false);
viewer.setHasViewList(false);
viewer.setHasLogo(false);
//Get the report source object that this viewer will be displaying.
Object reportSource = session.getAttribute("reportSource");
viewer.setReportSource(reportSource);
//Render the report.
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
viewer.dispose();
%>
-------------------------------------

Oh, i'm sorry :) It was a "time-out" tag in CRconfig.xml. Tipic closed.

Scheduling Crystal Report in BO Enterprise -- running Failed with an error

Hi all,
       I have scheduled a crystal reprt which is published in BO Enterprise. I have scheduled such that it should run right now. when i choose schedule, in the History screen of that particular Report Document, it is showing the status as Failed.
       I cecked the Instance Details of that particular instance in History Screen, it is giving me this error message:
" Error in File ~tmp1f905fddf0fb274.rpt: Unable to connect: incorrect log on parameters ".
       I have choose ' set to null ' to all parameters in the Parameteers Screnn while scheduling, as all the parameters are optional.
Please suggest how to go ahead with this error. I am new to BO Enterprise, I have to schedule crystal report in the Enterprise.
Thanks in advance !

hey i got this error resolved by giving server details in Data Base Configuration screen.

I need Crystal Reports XI R2 RDC merge modules with JDBC driver.

Similar Messages

Maybe you are looking for