Invalid Project ID error in TIMECARD

Hi
I am trying to configure the Project and Task valusets for the first and segment column on the time card.
We do not want to use Oracle Projects so I am trying to use the “Project Accounting” screen to create some projects and tasks.
I have created 2 valuesets for project and task.
1. select name, id from HXT_PROJECTS hp
2. select name , id from HXT_TASKS ht
I have configured the preferences for OTL.
Once I access the timecard through the Timekeeper responsibility and the columns for Project and task are displayed with the proper values from the valueset.
But when I try to submit the timecard I am getting an error saying “Invalid Project” and “Invalid Task”.

Shivanandan,
Error is coming because you are using the non project custom values but the mapping compoents used are still referring to the project context and trying to verify the custom info against project tables. You will have to change your alternate name mapping also.
--Shiv

Similar Messages

Error message: Error loading Project _ Invalid project file format

This monring I open dvdsp project and it happen frozen. It became not responding. So I had to force quit. Now I can't open project file. The error message said "Error loading Project _ Invalid project file format". What should I do?

This isn't quite the same issue, but close enough that it must be related:
I was working on a project this morning, added a ton of subtitles and tweaked a jpeg menu (in photoshop). Saved it, closed it down without any issues, and now it won't open. The "Loading Project" box gets 1/4 of the way along and freezes on "Loading Tracks". In Activity Monitor the DSPX_Encoder services are not frozen, although not actually using any CPU power.
Needless to say I don't have a backup...... and I thought that I had achieved a lot this morning.
Solutions attempted so far:
Disconnected the external hard drive with all the assets in the hope that I could isolate a dodgy file. Masde no difference, so the problem must be within the project file itself.
Anything else to be done??

Error "Invalid project ID" while running the API - ADD_PROJECT_ASSET

Dear All
I am trying to run an API in PL-SQL developer, here out of the mandatory parameters P_PM_PRODUCT_CODE and PM_PROJECT_REFERENCE are null in my tables , hence i am passing the same to the procedure .
The error I get is INVALID PROJECT ID when I passed some value like 'LEGACY SYSTEM for the P_PM_PRODUCT_CODE'. If I pass null for the same then I get INVALID PROJECT_ID

PM_PRODUCT_CODE is look up in oracle Projct. If you are using value like 'LEGACY SYSTEM' make sure it is defined in the Lookup.
which API are u using?
Thanks
Govind

Invalid Key code Error while installing crystal report server 11

While installing crystal report server 11,i am facing an erro which says Invalid Key code Error.I had raised this issue to SAP customer support and attaching the conversation that we had.PLEASE HELP me to resolve the issue.
MAILS--Dear Mohit,
Thanks for the patience.
We have received the below update from the Licensing Team.
You received your permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
You did not purchase these licenses for Crystal Reports Server, but purchased it for Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but you elected to use version XI instead and received key .
You would need to enroll the licenses in maintenance if you want to upgrade them.
In case of any queries please create a ticket via the Service Market Place.
Regards,
Jessy
Customer Interaction Center
SAP Active Global Support
Hello Jessy,
The customer received their permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
They did not purchase these licenses for Crystal Reports Server, they purchased Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but they elected to use version XI instead and they received key .
They cannot decide to upgrade now - they must enrol these licenses in maintenance if they want to upgrade them.
Kind regards,
Rosemary
From: BOSAPASIA
Sent: 29 September 2009 05:49
To: Savage, Rosemary
Subject: FW: Crystal Reports Server Installation Issue
Importance: High
HI Rose ,
Need your assistance on the below issue.
Customer purchased Crystal Report Server XI R2 in 2005. When he is trying to install it now, he is getting an Invalid Key code Error.
He has provided us the Scanned copies of the Key code and the registration number.Can you please help and check if he can be provided with a Keycode.
Regards,
Jessy
CIC Team Lead
Customer Interaction Center
Global Support Centre India
SAP Labs India Pvt Ltd
Hi,
Providing you with the required details to proceed further
Registration Number-
Registration Email Address-taxmantra.support
And also please find attached the scanned copy of the Registration key we got for the Crystal report server.
Dear Mohitk,
Thank you for your information.
I checked with the concerned colleague and received the below update:
Please check from where you got this key code. If from a paper, please scan it to us. Please let them track to the original paper or email.
If you have registered the key code, please provide us the registration number or registration email address so that we will try to check for you.
If you did not register before, as the promotion is over so the key code could not be replaced.
I request you to kindly check the same at your end and revert with the details.
Moreover, there are two ways for Crystal Report customer to get support.
One is customer with bundled product such like BOE and under maintenance. These customers will have an S-user ID and password to log a case in service market place via http://service.sap.com/message
A learning map was provided, listed on left column.
The other is customer with only Crystal report product, the support is via SDN.
http://service.sap.com =>Crystal Reports and Xcelsius Support=>Crystal Reports and Xcelsius Forums
Customers can first check whether other customer has got the same issue and find the reply from our engineers.
You may also post your own thread for support.
Anything else I could help, please do not hesitate to contact again.
Hi,
I am providing you with the details required to resolve the issue related to Crystal report installation,for reference of the issue please refer the mail below.
Please find attached the Scanned Document containing the details as per the details required by you.
Hope to see a quick resolution for the issue.
Dear Mohit,
Thank you for your e-mail.
As discussed, I understand that youu2019ve procured Crystal Reports Server 11 in 2006. However youu2019re facing issues with key codes while reinstalling the same. We request you to kindly provide us with below details for further assistance.
Your customer number:
Your customer name and address:
Purchase order number:
Any other products purchased along with Crystal Reports Server 11
Any S-User Id:
Any old case ID:
Please feel free to contact us if any further queries.
Hi,
I am raising this concern on behalf on Taxmantra project (Tata Consultancy Services noida).
We have bought licensed Crystal Reports Server 11 near by 2006.We are trying to install the crystal server but while installing ,we have encountered with an error message that:-
"The product key code you have entered is incorrect"
We are facing the same issue in 2006,I am attaching with this email the conversations that was held in 2006 to get the correct key code.
Please help us to resolve the issue as early as possible.
My contact number:
If you need any further information do let me know

Ajit,
By design, the product is not able to be installed under the superuser account.
1. Create a new user and specify a home directory for the user without a quota set.
2. Copy or move the installation files to a directory that the new user can read. I suggest you move the installation files directly into the new user's home directory.
3. Logon as the new user (or su - newuser)
4. run the installation shell script using that new user's account.
NOTE: Ensure the system meets the requirements from the supported platforms documents.
.Tony

Invalid Floating Point Error

I have one Captivate 3 project published as a Stand Alone
project with Flash 8 selected. There are 36 slides, no audio, no
eLearning, SWF size and quality are high.
One person who runs this gets an "Invalid Floating Point"
error when he tries to run it the first time. He is running Windows
XP SP2, Firefox 3.0.4. and Flash Player 10.0.12.36. Other Captivate
projects I've created run fine for him. This one sometimes runs
after the first Error message.
Any thoughts on the cause and fix?
Thanks,
Janet

iMediaTouch probably doesn't support Floating Point formats - it certainly doesn't mention them in the advertising. Try saving your files as 24-bit PCMs, and they should import fine.

Invalid lv client error

I created a .Net interop assembly with LV2009 and added it to a Visual Studio 2005 VB.net project. When I run the project I get a "Invalid LV Client" error when it calls one of the functions in the interop assembly.
Anyone got any ideas on this?
Thanks!

Hi there,
Here are a couple of things that you could perhaps try to resolve this issue.
Below is the Help link on how to build a .NET Interop,
http://zone.ni.com/reference/en-XX/help/371361F-01/lvhowto/building_a_net_assembly/
it might be a case of making the .NET interop again following the guidance above ensuring every function prototype is properley defined, as this may cause a problem.
Otherwise, you could use the Driver export wizard in LabVIEW 6.1, this is no longer included since LabVIEW 8.2.
Please let me know if this helps!
Liam A.
National Instruments
Applications Engineer

Invalid Keystore Format error

we need to configure an SSO from SAP portal and a third party website by passing encrypted userid as url parameters.
To configure the SSO I have received the public key of the third party and able to access it from server location. Now I have to access priavte key of the SAP Portal certificate and sign the UserId and pass it as url parameter. I have gone through many blogs and written code as below which is giving Invalid Keystore Format error.
My question is
1. What should be passed to FileInputStream?
As of now we are passing the .cer file which is stored as part of project.
Below code is throwing error at ks.load() method.
String fielPath1 = request.getPublicResourcePath()+"/SAPLogonTicketKeypair-cert1.cer";
FileInputStream ksfis = new FileInputStream(fielPath1);
KeyStore ks = KeyStore.getInstance("JKS");
ks.load(null, sPass.toCharArray());
BufferedInputStream ksbufin = new BufferedInputStream(ksfis);
ks.load(ksbufin, sPass.toCharArray());
PrivateKey priv = (PrivateKey) ks.getKey(alias, kPass.toCharArray());
Error is:
Invalid keystore formatsun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:633)sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)java.security.KeyStore.load(KeyStore.java:1185)am_sso_apc.doContent(am_sso_apc.java:132)com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:213)
Please let me know how to pass the filepath to extract the priavte key .
Regards,
Satish

I found the solution. As follows:
keytool -list -keytool keytoolfile -storetype jceks

Mac project file showing "Invalid Project" on PC

Got an Encore CS5 file created on a Mac that I'm trying to open on my PC so that we can burn BluRays... I try to open it, and get an error message saying "invalid project file." Any suggestions?

Thanks, Stan...
I never could get the project file to open, so I tried importing the media
files (exported as bluray files from PrPro on the mac) into Encore to begin
fresh, and it always killed Encore. I then tried importing them to PrPro to
see if I could DL to Encore, and it killed PrPro as well. So finally I ran
them through G-Spot and found that one of the two m4v files was in AVC/h.264
and the other had no associable codecs. The one without associable codecs
simply wouldn't open, and the one in AVC/h.264 would go half-way and then
kill the programs. Neither would play in any media player, including VLC.
So I've got the guy who created the files going back to his PrPro project on
the Mac and he's supposed to try and render them out in Avid DNxHD (which
I've been told is a good cross-platform codec) and if he can't get that to
work (the Mac's he's on are under IT lockdown and he may not be able to
install the Avid codec pack) then to render them out as 8-bit uncompressed
QuickTime. Either set of files, I can pull into PrPro and then do DL to
Encore and rebuild the menu system using the PSD files he sent me.

"Invalid project description" when imporing an existing project to the NWDS

Hello,
I am trying to import an existing project to the NWDS and I am getting this error:
"Invalid project description."
Details: "C:/workspace/<project_name> and C:/workspace overlap."
In .project I can't see anything unusual. Any idea?

Hi,
I know that one of the options for import (at least for NWDS CE) is to have it copy all files into the current workspace of the NWDS, regardless of the source folder of the old project.
If the old project happens to allready be a subfolder of the current workspace I can imagine it would produce an error similar to the one you get (but I've never seen it).
Which version of NWDS are you using?
Cheers
Dagfinn

"Invalid Project File" when I try to open my work! HELP!

When I try to open my .ncor project file (eithe with Encore 5 or 5.1), I get "Invalid Project File" pop-up box.
Why? What is wrong? There are only menus and buttons in the project!
All hard drive are connected. Using Windows 7 Pro (will switch to Mac very soon!!).
Never had a problem before. Until now.
Any suggestion???

What tha? Today is the first time I've Heard Of, Seen, or Recieved this error... ever!
- This project started on my Mac but something is awry with my Adobe/Mac setup so I did a minimal Adobe installation to my Win7 64bit PC laptop. (Pr CC, Pr CS6, & En CS6)
I just finished Building & Transcoding my project in En CS6 on my laptop.
I closed En and went to lunch. When I tried opening my project an hour later, I recieved the error.
Trying to move project folders into a new En project structure prompted the same error.
Rebuild: Media on External Harddrive
1. New En projects started on Desktop (1 for DVD - 1 for Blu ray)
2. Import Ps Menu... restarted En... OK
3. Import Audios (.wav)... restarted En... OK
4. Import Videos (.m2v)... "Indexing"... "Pending"... restarted En... OK
5. Create New Timelines from Media... "Pending"... restarted En... OK
6. Add Text to Menu... restarted En... OK
7. Created Buttons from Text... restarted En... OK
8. Linked Buttons to Timelines... restarted En... OK
9. Routed DVD Operations... restarted En... OK
10. Building DVD... Fingers Crossed!
* I have lost way too many hours of work due to various Adobe related issues over the last couple of weeks.
DVD Authored Successful!
(only difference was that I did NOT store the project on the external HD with the media... external HD the problem?)
Now, on the the Blu ray.

Invalid Project File

Lately when I make a blu-ray project, save and quit the software, I will attempt to re-open the project only to get an INVAILD PROJECT FILE error. The software does not crash, it stays open, and wants me to pick another project (presumably a "valid" project), but my original project is apparently toast.
Why is this happening?
I'm on XP PRO sp2

I'm having same problem with 1.5 error 45013 Invalid Project File...did you ever figure out what to do to rescue it or did you have to re-create it?
Matt

Oracleasm lib failed to load with "Invalid module format" error

Hi,
I'm tring to install the oracleasm lib onto our hardened Redhat EL5 server
I've download the oracleasm rpm from this page http://www.oracle.com/technology/software/tech/linux/asmlib/rhel5.html.
We're using Redhat 5 U 2
[root@PG673 modules]# uname -rm
2.6.18-92.el5 x86_64
[root@PG673 modules]#
The package I downloaded is an exact match with our kernel version
[root@PG673 modules]# rpm -qa | grep asm
oracleasm-2.6.18-92.el5-2.0.5-1.el5
oracleasm-support-2.1.3-1.el5
oracleasm-support-2.1.3-1.el5
oracleasm-2.6.18-92.el5-2.0.5-1.el5
oracleasmlib-2.0.4-1.el5
oracleasmlib-2.0.4-1.el5
[root@PG673 modules]#
RPM installation went well, but when we run the /etc/init.d/oracleasm configure command, we hit the following error
[root@PG673 other]# /etc/init.d/oracleasm configure
/etc/init.d/oracleasm: line 207: /usr/sbin/oracleasm: cannot execute binary file
Later we found out that the oracleasm module haven't been loaded, so we try to load it manually, but we hit the "Invalid module format" error.
[root@PG673 modules]# modprobe -l | grep asm
/lib/modules/2.6.18-92.el5/kernel/drivers/addon/oracleasm/oracleasm.ko
[root@PG673 modules]# modprobe oracleasm
FATAL: Error inserting oracleasm (/lib/modules/2.6.18-92.el5/kernel/drivers/addon/oracleasm/oracleasm.ko): Invalid module format
[root@PG673 modules]#
As I know this error could happen if the driver version is not match with the system kernel version.
The problem is we're already using an exact match version of driver with our system, I can't think of what to do next in order to proceed the installation.
Really appreciate if someone could point me a direction.
Thanks
Mike

Hi Mike,
something looks a bit strange for me. On my OEL 5.4 x64 system i have just the following 3 packages:
$ rpm -qa | grep asm
oracleasm-2.6.18-164.el5-2.0.5-1.el5
oracleasm-support-2.1.3-1.el5
oracleasmlib-2.0.4-1.el5 Your packages should be I think the following:
http://oss.oracle.com/projects/oracleasm-support/dist/files/RPMS/rhel5/amd64/2.1.3/oracleasm-support-2.1.3-1.el5.x86_64.rpm
http://otn.oracle.com/software/tech/linux/asmlib/files/RPMS/rhel5/amd64/2.0.4/oracleasmlib-2.0.4-1.el5.x86_64.rpm
http://oss.oracle.com/projects/oracleasm/dist/files/RPMS/rhel5/amd64/2.0.5/2.6.18-92.el5/oracleasm-2.6.18-92.el5-2.0.5-1.el5.x86_64.rpm
Uninstall all asm packages and retry with just those three.
Good luck!
Cheers,
David
OCP 9i / 10g
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

Invalid Project File - after power loss

Working a client DVD project, 30 disc's to burn. Encore project was finished and ready for builds. I had the project open, blank disc in drive, and my power blinked off and back on. After PC reboot the project wont open, Invalid Project File. It looks like the whole Encore project folder somehow got moved into the Premiere folder for the same project, it was not in that location before the power blink. All the Encore project folders look to be intact - Cache & Source items all there. I moved the whole Encore project file back to its previous location but still wont open, any ideas on how I can get it to open?
Thanks,
Donnie
WIN7, CS5.

Encore doesn't do autosaves. And won't do save as copy. Only Save-As.
Wow; how unlucky can you get!
Just curious; did you have a power backup on your system. I've had just enough issues (long ago now), that I won't work without one.
Encore is very unforgiving when things get out of place. Also, projects, once corrupt, are hard to recover. The "do-over" is the only fix for many problems.
What message do you get when you try to open it?
I don't see how the whole folder structure could have been moved. We always have to allow for operator error, but also for those computer oddities that surprise and amaze us!
The Encore project file itself is at the top of (outside) the Encore folder structure. Is that what you moved it to?
But try this also:
Troubleshoot damaged projects in Encore on Windows
http://kb2.adobe.com/cps/406/kb406006.html

"Unable to Open Project File" - error

Does anyone know how to resolve an "Unable to Open Project File" - error. I accidentally shut down my computer wrong, although Final Cut wasn't open.

Welcome to the forums.
The project file might have gotten corrupted. Look for the AUTOSAVE VAULT (typically in the DOCUMENTS>FINAL CUT PRO DOCUMENTS folder) and open the most recent version. Copy it to your main project folder if it works.
If not, then try trashing your prefs with FCP Rescue.
Shane

Download Helper, even with paid converter upgrade, gives "Invalid Capture File" errors and will not record audio, with "File Creation Error - Unable to rename/copy audio file" Error.

Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
The paid upgrade of "Converter" doesn't work.
Instructive documentation - not very good.
Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
Could use timer tracking of the record process.
Are there operating system limitations? (Have Windows XP Pro)

That is an issue for the developer of that Download Helper.

Invalid Project ID error in TIMECARD

Similar Messages

Maybe you are looking for