Invalid Segment Alignment - Flash Builder 4.7 on Windows

I received the following message when I attempted to submit my app to apple:
Invalid Segment Alignment - This app does not have proper segment alignment and should be rebuilt with the latest version of Xcode. Please contact Developer Technical Support if you need further assistance.
While this issue is being discussed for Flash CC 2014 on Mac, I am producing the IPA via Flash Builder 4.7 on Windows, and then offloading that to a Mac to upload with Application Loader.
Is there a workaround for Flash Builder 4.7 on Windows? What about Flash Builder 4.7 on Mac? (theoretically I could temporarily transfer my creative cloud license over from one of the two machines that have it, and publish from Flash Builder there... but this is really rather annoying. Will do it if it's the only way though)

David, the other thread is quite long, but the bottom line is: you need to the use latest (15.0.302) AIR SDK Beta to build your IPA file, whether on Windows or Mac.
I'm not a Flash Builder user, but there's a documented process for overlaying the AIR SDK into Flash Builder - I believe this is still applicable.
Cheers,
-Jeff

Similar Messages

Error ITMS-9000: Invalid Segment Alignment

Hello everyone,
This is my first time submitting an app to the app store. I've done ad-hoc distribution before, but my client needs this app on close to a thousand of their iPads, and they have corporate offices everywhere, so B2B is the way I have to go.
Everything is built and tested and works fine. Certificates and Provisioning Profiles are all fine. I am at the last possible step and when I go to submit the .ipa file in Application Loader 3.0, I can't shake this message...
ERROR ITMS-9000: "Invalid Segment Alignment. This app does not have the proper segment alignment and should be rebuilt with the latest version of Xcode. Please contact Developer Technical Support if you need further assistance."
Here's the details...
The app was built in Adobe Flash CC 2014 using AIR for IOS 14.0. I used my PC for the actual building/publishing of the app and then transferred the .ipa file to my Macbook when I tested it and everything was finalized by the client. Application loader will not let me deliver the app to iTunes connect for submission. I keep getting this error.
I've tried everything I can think of. I've installed Flash CC on my Macbook and tried publishing again. All the Certificates and Provisioning Profiles were made and downloaded on the Macbook. I've tried submitting .ipas that were published in AIR for IOS 14.0 and 13.0. I've tried uninstalling xCode 6 and Application Loader 3 and using older versions. So far, nothing has worked.
Has this happened to anyone else? I'm really in a jam here. My client needs their app and I can't fix this last issue. It's very difficult because Adobe Customer Support says that the problem is Apple's Application Loader since the app works fine and distributes without problem ad-hoc. Apple Customer Support says they can't help either, since the app was built in a 3rd party software and not in xCode. If anyone can point me in the right direction, that would be amazing.
Thanks,
Lee

There's a huge issue with this on Adobe's developer forums.
This issue is happening to people everywhere, and it's only been happening for about 20 days or so. Before that Flash CC apps uploaded fine.
There is a successful workaround to the problem that a couple of guys came up with, but it's all terminal coding kind of stuff, and that's miles beyond my comprehension. That kind of coding is way past me, which is why I built it using Flash to begin with, because Action Script is simple. It would take me longer to figure out the work around that it did for me to build the app itself. lol
Any other ideas???

Solution to ERROR ITMS-9000: "Invalid Segment Alignment."

I was using Flex 4.13 SDK and AIR 14 SDK. When I build a release version of my iOS app for the iTunes App Store, I received the following error.
ERROR ITMS-9000: "Invalid Segment Alignment. This app does not have proper segment alignment and should be rebuild with the latest version of Xcode. Please contact Developer Technical Support if you need further assistance."
To resolve this problem I had to install the Apache Flex SDK with Flex SDK 4.13 and AIR SDK 15.0.302. I installed the FlexSDK and AIR SDK with the Apache Flex installation binary.
For many of you, this should be enough to rebuild and run your application. However, after I built an ad-hoc version of my iOS app, and transferred it to my iPhone 4 (iOS 8.0.2) and iPad 2 (iOS 8.1), the app crashed immediately after launch.
If I rebuilt my App in debug mode (-debug-interpreter), it ran correctly.
However, I found a reference on an Adobe message board to a command line parameter, useLegacyAOT, which indicated that the poster had some success with this command line option after his app crashed.
I added the option, -useLegacyAOT yes to the build environment.
This option tells the compiler to disable fast packaging. However, the new linker in AIR 15.0.302 still aligns segments correctly.
Don't do this unless you have to. But this seemed to work for me, and I was able to submit my iOS App to the iTunes App Store.

I'm about send application built by Adobe Flash CS6 with AIR SDK 15 for iOS but got error too:
Error ITMS-9000: "Invalid Bundle. The bundle at 'XX.app' does not contain a bundle executable
anyone know how solve this issue??

Invalid Segment Alignment

I'm trying to load an .ipa file (on mac using the application loader).
After few minutes i get an error message say
ERROR ITMS -9000 : "Invalid segment alignment".
My .ipa file was created with flash builder 4.6,
Flex sdk version 4.6 (build 23201)
Air version 15.
What do I have to do to fix this problem.
Thanks,
Gil

Refer to this thread for details:
No longer able to submit app to iTunes.

IOSApp rejected: Error ITMS-9000 Invalid segment alignment

I am getting an error while trying to release the application for Apple App Store.
Error ITMS-9000 Invalid segment alignment
Following the process flow mentioned on the link below:
http://www.raywenderlich.com/8045/how-to-submit-your-app-to-apple-from-no-account-to-app-s tore-part-2
I am stuck with this for quite sometime now, any help would be greatly appreciated.
The SDKs and the framework details are as follows:
Flex SDK 4.12.0
Apple IOS 8
Adobe AIR 16

I'm about send application built by Adobe Flash CS6 with AIR SDK 15 for iOS but got error too:
Error ITMS-9000: "Invalid Bundle. The bundle at 'XX.app' does not contain a bundle executable
anyone know how solve this issue??

Invalid segment alignment (iOS)

Hello Developers, I am trying to submit an app built with the latest version of AIR (15). I got the following error message.
ERROR ITMS-9000 Invalid Segment Alignment. This app does not have proper segment alignment and should be rebuilt with the latest version of Xcode.
Any help would be appreciated.
Thank you,
Justin

Refer to this thread for details:
No longer able to submit app to iTunes.

When will flash builder support export to Windows Mobile OS?

When will flash builder support export to Windows Mobile OS?

I think maybe VB was confused by you calling it "Windows Mobile," as Windows Mobile is MS's obsolete, abandoned Mobile OS for pre-iPhone era with a stylus and all that, I am assuming you probably meant "Windows Phone" / Windows 8 Metro UI / Windows RT, the new iPhone-like MS Mobile OS.
See this thread: http://forums.adobe.com/message/4526684#4526684

Do I need two separate licenses to be able to use Flash Builder on Mac and Windows?

Does my Creative Cloud subscription allow me to install Flash Builder on both Mac and Windows machines?

Hi,
I know it has been a while since you replied to me. I tried it at the time and sadly it didnt work and I got frustrated and ignored it for a while. I have just tried what you suggested again and this is how it went:
• I have connected both the AX and iMac via ethernet cables to the O2 box.
• This time my iMac did detect the AX and it automatically opened the AirPort Utility window.
• I followed your instructions on the setting and connected it to my existing network etc.
• It asked to restart the AX.
• After a long wait this message appear:
"Airport Utility was unable to find your Apple wireless device after restarting.
The settings for this Apple wireless device have been successfully updated, but there was a problem rejoining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again."
I tried this and now when I click Rescan in the AirPort utility it just says that it cannot detect any devices. And in the meantime the AX is still flashing orange.
Do you think that the AX is faulty. Although it was functioning perfectly in my previous flat. I just don't understand how one minute the iMac detects it and the next it doesn't even though the settings have been supposable successfully updated. Very frustrating.
Thanks for your time,
Louca

Error messages while installing CC Flash Builder to desktop. Windows 8

ERROR: DF024: Unable to move file at "J:\adobeTemp\{EB510B48-ACF6-43A0-8214-3DA0D6D0936F}\_1661_98e9c69164ca1bd5cffa44e405d6fb 7e" to "J:\Programs\Adobe\Adobe Cloud\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\frameworks\projects\air \Licensing\Android\AndroidLicensingLib\src\com\adobe\air\sampleextensions\android\licensin g\LicenseStatusEvent.as"
Error 3 The system cannot find the path specified.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 1635)
ERROR: DF023: Unable to delete file copy at "J:\Programs\Adobe\Adobe Cloud\Adobe Flash Builder 4.7 (64 Bit)\FlashBuilder.exe" Error 3 The system cannot find the path specified.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 3)
ERROR: DW063: Error rolling back command ARKMoveFileCommand(Seq 3)
ERROR: DF023: Unable to delete file copy at "J:\Programs\Adobe\Adobe Cloud\Adobe Flash Builder 4.7 (64 Bit)\.eclipseproduct" Error 3 The system cannot find the path specified.. Try setting correct permissions to the specified file/folder or parent folder, so that admin has rights to modify it.(Seq 2)
ERROR: DW063: Error rolling back command ARKMoveFileCommand(Seq 2)

Are you using a computer Administrator account?

ITMS - 90179 Invalid Code Signing / ITMS - 90209 Invalid Segment Alignment

I've been getting these two errors no matter what I try. I've deleted all my profiles and certificates, remade them and even remade the App ID multiple times and nothing happened and still the same error. I've updated XCode too and still the same errors.
I used a Wildcard App to create my .ipa file in Flash Pro CC selecting the Apple App Store and tried to publish it through application loader.
Is there any solution to these two problems? Thanks.

This is mine, I did try deleting my xml file before, but didn't work out.
<?xml version="1.0" encoding="UTF-8"?>

-<application xmlns="http://ns.adobe.com/air/application/14.0">
<id>com.jana.meteorapp</id>
<versionNumber>1.0</versionNumber>
<filename>UFO</filename>
<description/>
<name>UFO</name>
<copyright/>
-<initialWindow>
<content>UFO.swf</content>
<systemChrome>standard</systemChrome>
<transparent>false</transparent>
<visible>true</visible>
<fullScreen>true</fullScreen>
<aspectRatio>portrait</aspectRatio>
<renderMode>auto</renderMode>
<autoOrients>true</autoOrients>
</initialWindow>
-<icon>
<image57x57>AppIconsForPublish/a57.png</image57x57>
<image72x72>AppIconsForPublish/a72.png</image72x72>
<image114x114>AppIconsForPublish/a114.png</image114x114>
</icon>
<customUpdateUI>false</customUpdateUI>
<allowBrowserInvocation>false</allowBrowserInvocation>
-<iPhone>
-<InfoAdditions>
<![CDATA[ <key>UIDeviceFamily</key> <array> <string>1</string> </array> ]]>
</InfoAdditions>
<requestedDisplayResolution>high</requestedDisplayResolution>
</iPhone>
<supportedLanguages>en</supportedLanguages>
</application>
<?xml

ITMS - 90209 Invalid Segment Alignment

I've updated XCode and still get this same error. I've installed adobe air 17 beta and adobe air SDK too.
Does anyone know how to get rid of this error?

I keep getting this now too, using AIR 13, if I try and use 16 none of the embedded fonts work.... HELP!

Not able to install Adobe Flash Builder in windows xp 32 bit OS. Getting error msg 64 bit required.

Hi All,
Not able to install Adobe Flash Builder 4.7 in windows xp 32 bit OS. Getting error msg 64 bit required.
Pls help me for installation.
thanks in advance.

You don't have service pack 3 most likely. Refer to the tech specs:
http://www.adobe.com/products/flash-builder/tech-specs.html
Mylenium

Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?

The documentation for Flash Builder 4 beta says that after opening flash from flash builder, I should click a "done" button in flash and flash should close and what I created in flash should be included as a component or container in Flash Builder. Using the Flash Builder 4 beta on Windows, when I click on the "create in flash" button on the properties panel for either the new flash component or container, Flash CS4 opens, I create something in Flash and no "done" button is present. Nor is anything present in the menus resembling a "done" option. Where is it?

Hi Jeffrey:
Still no done button. Now under commands in Flash I can convert symbols to flex components and containers and these show up in the Flash library.
Thanks:
Jim
Date: Wed, 30 Sep 2009 09:58:10 -0600
From: [email protected]
To: [email protected]
Subject: Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?
Hi,
You may need to install FlexComponentKit.mxp to your Flash CS4 beforehand.
Jeffrey
Date: Tue, 29 Sep 2009 17:04:36 -0600
From: mailto:[email protected]
To: mailto:[email protected]
Subject: Flex Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?
I apparently didn't get one. I've looked under various workspace configurations. Another thing that seems odd is that when Flash opens I get the opening panel that allows me to select the type of file and version of AS I want to use. I select new file with AS3. Any ideas on why the "done" button wouldn't be present and if the opening panel is what I should expect on opening Flash after clicking the "create in Flash" button?
>
>

"Finding occurrences" error when editing .mxml file in Flash Builder 4.6 Premium (Trial)

I am evaluating Flash Builder 4.6. Windows 7 Ultimate x64
I am trying to go through the Flex in a week training series but I am getting a lot of the "Finding occurrences" errors when editing the mxml files.
The error:
An internal error occurred during: "Finding occurrences".
java.lang.NullPointerException
This error occurs almost every time an xml tag is edited.
I can dismiss the error window that pops up by hitting 'Enter' and can continue editing the .mxml file but the error keeps repeating.
I was getting this error in the Day 1 set of exercises but after awhile the errors just stopped.
Now that I have imported the Day 2 starter projects, the error has started again but is occurring on almost every keystroke when editing an xml tag/element!.
Anyone have any ideas how to correct this issue?

Ok, I seemed to have found a solution/workaround for the error.
After importing the Day 2 starter projects, I did not exit and restart Flash Builder. After exiting/restarting Flash Builder, I can now edit the .mxml files without the annoying "Finding occurrences" errors.

Flash Builder 4.7 Windows 64 bits MXML visual editor ?

Hi, I installed Flash Builder 4.7 for windows 64bits, but I can not edit mxml in visual editor, no visual flap.
Tanks.

I too was upset, when read it.
Adobe labs:
Yes, Design View has been removed from Flash Builder 4.7. In case you need to use Design View, please use Flash builder 4.6. ...
http://labs.adobe.com/technologies/flashbuilder4-7/?tabID=details#FAQ

Invalid Segment Alignment - Flash Builder 4.7 on Windows

Similar Messages

Maybe you are looking for