Invalid Signature Exception in Swift Receiver Channel

Hi,
We are using sap swift package for PI.We have BCM signing the file in ECC and PI validating the signature before sending the file out to the bank via the swift broker.
We have configured as per these notes
Note 1144603 - BCM: Back-end signature for data medium
Note 1153053 - BCM: Backend signature for data medium
Created the FINBRM certificate in STRUST in ECC.
Deployed this certificate in PI.
However we still get nvalidSignatureException when we run the interface on the receiver channel.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.xi.swift.ParserException: com.sap.xi.swift.InvalidSignatureException.
Any ideas?
Thanks in advance.
Ray

It might be due to certificate not installed properly or invalid or expired certificate. Talk to Basis and verify in keystore that you have the valid certs stored.

Similar Messages

SWIFT Receiver channel error

Hi,
I have configured my Fileact sender channel as described in the "SAP Integration Package for SWIFT".
But i get this error in the channel monitor.
1)
Adapter Framework caught exception: java.lang.NullPointerException
2)
Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.xi.swift.ParserException: java.lang.NullPointerException.
It seems that I have some kind propblem with the swift adapter module. But can I clarify this ?

Did you solve the problem?
How do you transform form flat file to SWIFT_FAT xml format?

Error in SOAP receiver channel: java.io.IOException: invalid http response:

Hi experts,
I have a IDOC to SOAP scenario where SOAP receiver channel is sending data to web service. In the receiver channel I am getting error as below. Kindly help me to resolve this issue. Thanks.
"Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: null"

Did you check this?
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
Regards
Pothana

Invalid receiver channel

Hi All,
often i am getting the below error for the communication chanel
com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error: invalid receiver channel 'e3758e649d443e298f42b90e3c1bfb71'
it is getting solved when i stop and start the communication channel.
is there any permanent solution for this??
Thank You,
Madhav

Hi,
This error is definitely due to cahce only...
the same has been experienced by me as when i am doing a cache refresh...accidently interface started and i encountered the error...
after cahce refresh is done then the interface run smothly..
if you are getting this error very often then better to contact SAP SUPPORT thry many provide the permanent sol..
HTH
Rajesh

Received notice to update my I Tunes. Would not update. Error message read " I Tunes has an invalid signature" never had an issue with updates till this notice. What do i do to resolve this error?

Received notice to update ITunes. When downloading, got error message "ITunes has an invalid signature" and would not update. Never had an update issue until this download. How do i rectify this error?

Hi, bro2pro.
I would recommend a complete uninstall as outlined in the article below. Make sure to process the uninstall in the order specified.
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
Once uninstalled, download iTunes directly from here iTunes 11.0.4 or iTunes.com. Make sure to save the file to your desktop instead of selecting the run option. Locate the file on your desktop, right click and select run as administrator. This should allow the install.
Cheers,
Jason H.

Exception caught by adapter framework: RfcAdapter: receiver channel not in

Hi friends,
I am doing a file-RFC-file scenario. This is based on the blog: /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit The company ID is sent to the RFC through a xml file. RFC will return the company details which will be written again into a xml file.
My source file is getting picked up. But while sending the company ID to the RFC, i am getting an error. It says: <b>Exception caught by adapter framework: RfcAdapter: receiver channel not in list of running clientPools:</b>. I have checked the RFC and is running perfectly.
Can anybody help me to solve this error?
Regards,
Divija.

Hi,
it is better to restart the RFC adapter engine.
Is this RFC adapter is active in the Adapter Monitoring ?
Also change the RFC adapter configuration and activate it. Then activate the Receiver Agreement.
Also refer SAP note -730870 ( question no 17 and 20)
Regards,
Moorthy

I'm having a problem updating the iTunes software. Receiving "invalid signature". Does anyone know how to fix this?

Hi Everyone,
I have been trying to update iTunes, Safari, and Quicktime. Keep receiving "invalid signature" and then it removes the attempted download. Does anyone know how to fix this?

I have had this happen as well. What I had to do was sync the iPod to remove the album and the resync the album back to the Classic. I've had this happen with my iPhones as well. Must be a bug in either the current OS or iTunes versions.

I'm trying to download the newest update of iTunes and I keep receiving the message: invalid signature. Why? What now?

I'm trying to download the newst update of iTunes for my Ipod Touch. I continually receive the 'invalid signature'. Why? How can I correct that and then update my unit?

Try updating using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

BCM/SWIFT payment, parameter file Receiver channel

Iu2019m using the u201CSWIFT_payload_parFile_Splitu201D Operation Mapping for the FILEACT payment transaction.
The result should be
1) payload file
2) parameter file (*.par)
This seems to work just fine. My problems starts with the receiver channel for the *.par file.
I need to know more about how to setup the modules and parameters in the "*.par" receiver channel.
Is there a configuration guide for this?
Thanks.
Frank

Hi Frank,
I am facing similar issue. I am able to generate the parameter file but the overrides section contains only one parameter "Request Type" whereas there are other parameters that are mandatory. How do I get these filled?
Regards,
Deepthi

While downloading the newest version, I receive an error saying itunes has a invalid signature and wil not download. Help!!!!!!

When downloading the newest version, I get an error message saying iTunes has an invalid signature and will not be downloaded. Help!!!!!

Thank you for using the Apple Support Communities
I am assuming you are having difficulties installing the latest version of iTunes. Are you using a Windows PC or a Macintosh? Which version of Windows or OS X are you using?

"Unauthorized" error for SOAP receiver channel

Hi all,
I have a scenario in which I am calling a .NET web service from a UDF in which the XML payload is constructed manually. I have configured a SOAP receiver channel. Also, since the web service needs certificate authentication, I have checked the corresponding parameter in the SOAP channel and selected appropriate client certificate.
When I execute the mapping, I get the following error -
com.sap.aii.mapping.lookup.LookupException: Exception during processing the payload.Problem when calling an adapter by using communication channel SOAP_RCV_IMWS_Change (Party: , Service: IMWS, Object ID: dda07d364ca73d4ab9e89e562a971b36) XI AF API call failed. Module exception: 'com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized'. Cause Exception: 'invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized'.
Is this related to error in certificate authentication process, OR wrongly formed XML payload OR anything else ?
Regards,
Shankar

No. I didn't provide any login info. The web service doesn't specify username login requirement. Instead, it needs client certificate for authentication, which I provided in SOAP receiver channel.
I am testing the web service by executing the message mapping. The web service was executed successfully from its 'Test Page' like for SAP web services we have web service navigator. So it runs ok from that test page, but gives error when called from UDF.
Regards,
Shankar

OFTP_TCP Receiver channel error

Hello All,
To an exisitng sceanrio of EDI Sales Invoices i have added new party. For this i have taken as refrence an exisiting party in the scenario.
While testing newly configured party interface I am getting the errors in receiver channel as below.
Delivery of the message to the application using connection OFTP_TCP_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: Recoverable Error: Invalid state transition in session state machine.: State: WF_CF_CF, event: REL_IND, Recoverable Error: Invalid state transition in session state machine.: State: WF_CF_CF, event: REL_IND: javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: Recoverable Error: Invalid state transition in session state machine.: State: WF_CF_CF, event: REL_IND, Recoverable Error: Invalid state transition in session state machine.: State: WF_.
When I have tested the existing party interface the message was processed successfully.
How to trouble shoot this error? any check points to avoid this error?
Cheers
Veera

Hi,
Total 18 party's were there. All parties were had having the same Sender & Reciever SSID. I have copied the same channel. An module was used "SaveAttachment". Modified the parameter value of this. I.e to save the file using parameter name.
Provided ODETTE as Agency, Scheme - OFTP and Name - XXXXXXXXX0453.
The Invoice messages are successfull in MONI for newly added party.The Idoc messages are converted into EDI format too.
Pls let me know if you a
Cheers
Veera

Error on JDBC Receiver Channel

Hi,
I configured a Receiver JDBC Channel to read data from XI own DB. We are using MS SQL Server 2005.
During the test, I'm running to the following issue. Any ideas on what could be causing this error:
Log for CC monitor:
2010-07-20 13:53:20 Success The message was successfully retrieved from the receive queue.
2010-07-20 13:53:20 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2010-07-20 13:53:20 Success JDBC adapter receiver channel RPI_LOOKUP_JDBC: processing started; party , service RPI_DB
2010-07-20 13:53:20 Success Delivering to channel: RPI_LOOKUP_JDBC
2010-07-20 13:53:20 Success MP: Processing local module localejbs/CallSapAdapter
2010-07-20 13:53:20 Success MP: Entering module processor
2010-07-20 13:53:20 Success select sem_datetime, sem_user, sem_host, sem_flag from "/RPI/T_USER" where sem_user=dom1\user1
2010-07-20 13:53:20 Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'query' (structure 'stmt'): com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name '/RPI/T_USER'.
2010-07-20 13:53:20 Error Unable to execute statement for table or stored procedure. 'query' (Structure 'stmt') due to com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name '/RPI/T_USER'.
2010-07-20 13:53:20 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'query' (structure 'stmt'): com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name '/RPI/T_USER'.
2010-07-20 13:53:20 Error Exception caught by adapter framework: null
2010-07-20 13:53:20 Error Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'query' (structure 'stmt'): com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name '/RPI/T_USER'..
2010-07-20 13:53:20 Error The message status set to NDLV.
Here is the payload:
<root>
<stmt>
<query action="SQL_QUERY">
   <access>
    select sem_datetime, sem_user, sem_host, sem_flag from "/RPI/T_USER" where sem_user='dom1\user1'
   </access>
</query>
</stmt>
</root>
Connection Settings:
JDBC Driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
Connection: jdbc:sqlserver://hostname.domain.net;databaseName=XI1;
I did check on the DB and am able to see the table /RPI/T_USER, with 0 records.
Thanks in advance,
Sumant.

<root>
<stmt>
<query action="SQL_QUERY">
   <access>
    select sem_datetime, sem_user, sem_host, sem_flag from "/RPI/T_USER" where sem_user='dom1\user1'
   </access>
</query>
</stmt>
</root>
Not sure if select, from, where will work in lowercase. Instead of query (node under stmt) should you not mention the table_name?
<root>
<stmt>
</RPI/T_USER action="SQL_QUERY">
   <access>
    SELECT sem_datetime, sem_user, sem_host, sem_flag FROM /RPI/T_USER WHERE sem_user='dom1\user1'
   </access>
<//RPI/T_USER>
</stmt>
</root>
I did check on the DB and am able to see the table /RPI/T_USER, with 0 records.
How will the SELECT work then, if the table is with 0 records?
Regards,
Abhishek.

As2 receiver channel, SEEBURGER AS2: 500 Internal Server Error

Hi,
There is one scenario in our landscape, its running in production, Proxy to As2. The interface working fine for last 2 weeks, today its showing error in As2 receiver channel saying
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: 500 Internal Server Error # , SEEBURGER AS2: 500 Internal Server Error #
I have searched in forum, but couldnt get much idea on why this error encounters and how can we resolve it.
Kindly provide your inputs to help me resolve this.
Thanks,
Ruchi

Hi Ruchi,
500 means the requested server does not understand the request (the requested service is unknown). The reason is obvisiously outside of PI. You have to contact the 3rd party owner and ask why the system is refusing the request instead of responsing like before.
Regards,
Udo

ITunes won't find new iPhone and update invalid signature

Trying to restore from iPhone 4 Restore backup to new iPhone 6 (Windows 7) and encountered the following......
When trying to connect the new iPhone 6 to my existing iTunes account, iTunes would not show the device (couldn't find it). Received a popup that stated the phone could not be recognized and an update to 11.4 (12.1....) was required. [[ I found this strange since I just updated and backed up my iPad and old iPhone 4 last night in anticipation of getting the new iPhone 6 today.]]
I tried the update multiple times but it would stall 15 minutes in and give the message "invalid signature" and error out. I looked through many comments on this support sight, read what related help was available through iTunes help, etc, and spent HOURS trying each one (listed below). A combination of a couple of steps finally worked for me so I am sharing this to hopefully save you some time and frustration. MUCH frustration.
Tried but did not resolve..... updated new phone to current 8.1.1 and made sure 'Find My Phone' was turned off.
Tried but did not resolve..... downloaded iTunes manually from within iTunes.
Tried but did not resolve .... downloaded iTunes manually from Apple.com downloads.
Tried but did not resolve..... downloaded Firefox (an alternative browser) and manually downloaded iTunes again from Apple.com.
WARNING: The following resolution will wipeout any previous iTunes settings like views, organization, etc. It will also wipeout any previous setup already done in your new iPhone other than fingerprinting, language and date/time setup. Email accounts, setup preferences, etc, will be wiped. Also, your old phone will no longer work with iTunes - apprently this new software issue will only recognize one phone. Your music, contacts, most apps (I did lose a few), if backed up from your old phone properly before starting this process will 'Restore' to your new phone in the updated iTunes.
Tried and worked..... Closed iTunes. Went to Start on my computer, typed itunes64setup. I had two itunes64setup listed due to the first manual download from Apple and then the one done again via the Firefox browser. I chose the one downloaded from the Firefox browser - not sure it would make a difference. (If you have two listed, Hover your mouse over each and it will give you the times of when they were downloaded). Right click on the itunes64setup and choose 'Run as Administrator'. (You may incur issues with this step if using a work proprietary computer.) Opened iTunes and plugged the iPhone 6 in and it recognized the phone. I was then able to 'Restore' info.
Since I had already tried the manual downloads, I am not sure if they were necessary and maybe running the itunes64setup only would have resolved the issue. If you are addressing the iTunes update iPhone 6 issue and try the itune64setup without the manual downloads, etc, and it works, please update this support entry so others can follow your lead.
Thanks!
What Apple is not telling (WARNING) their faithful users about is that they obviously have software issues for existing users in the 'Windows' world when upgrading to the newer phones and to do so you are going to need to spend some time and effort. This is strike two for me, just coming off the 8.1.0 iPad 2 upgrade debacle Apple put so many of us through. Shame Shame, Apple! It's called Q/A and should be applied to all your users environments and not just those who have everything new in an Apple/Mac only world. There are more of us that don't. Thx!

Step one : Please restart EVERYTHING involved. This means your cable modem / dsl router, Airport Base Station if you have one, your computer, your iPhone / iPod Touch / iPad (2) if applicable. Shut it all down and power it all back up in the appropriate order (modem / router / computer, et cetera)
Step two : Make sure you have the most recent version of all software. Verify you have the latest version of iTunes and the Remote software. Check to make sure the AppleTV has no updates as well.
Step three : Enable Home Sharing on all applicable devices.
Step four : Make sure the AppleTV and the computer are both hooked up to the same network, wireless or otherwise, and make sure if you have a non-Apple router anywhere in the mix it is allowing traffic to flow freely between all the Apple tech. Apple has specific documentation on this. Search the Support site for "Apple TV: TCP and UDP ports and protocols used" and make sure none of those ports are being blocked by the router or any firewall software you may have running, like Zone Alarm.
Step five : Fire up the Remote app on your phone, and let it search for your AppleTV. There should be no passwords required anywhere if the Apple tech is properly talking to one another.
Step six : If all the above still doesn't work, then call in a professional who can get eyes on the equipment and do a proper job of troubleshooting.
Please let us know if this does not help.

Invalid Signature Exception in Swift Receiver Channel

Similar Messages

Maybe you are looking for