Inventory management problem with WS-C2950-24 on CWLMS 4.0

Hi Joe,
I have a problem with inventory management wiht 2950- 24 switches on which I am not able to capture inventory as well as the configurations. The IOS version is 121-22.EA13 and featureset is i6k2l2q4-mz. However, when I troubleshoot it, all the transport protocols (Telnet, ssh, tftp etc) shows success.
Thanks,
Best Regards // Rajiv

Inventory uses snmp to communicate to device. Please check you device has snmp configured and LMS has correct SNMP RO credentials added to it.
Please try to do a manual snmpwalk from LMS server (using device centre > tools) and see the walk succeeds.
Then again try to run the inventory from LMS server on this perticular device and if it fails, share the failure result/screenshot etc details. NMSROOT/log/ic_server.log as well.
-Thanks

Similar Messages

  • Will MIM (Merchandize and inventory management) work with SAP AFS / SAP POS

    We are implementing SAP AFS ERP at the head office and SAP POS at the retail stores.
    We want to implement the MIM module for inventory management at retail store level. Does MIM work in conjunction with SAP AFS. A consultant was suggesting that MIM works only with SAP Retail and no other vertical SAP solution.
    Can someone please clarify?
    Regards
    paddy

    MIM is linked to IS Retail, not to AFS.
    Nevertheless, you can always link and AFS and a Retail system.  SAP provides a very convincing ALE scheme for this.
    Eric

  • Import Manager - Problem with 0..n field in Import Manager

    Iu2019m having problems with XMLs that contain multiple or single tags in MDIS process. For example: I did the map using a XML with multiple tags for Address:
    <address>
    <item>
    u2026
    </item>
    <item>
    u2026
    </item>
    </address>
    When I send two address or more Address, the Import Server work fine, but when I send only one Address, the address is not imported.
    <address>
    <item>
    </item>
    <item>
    </item>
    </address>
    Opening the xml file with only one Address in Import Manager, I saw that the fields isnu2019t mapped, but when I open a xml file with multiple Address itu2019s open correctly.
    The XSD cardinality for the Address\Item is 0..n

    Hi Evandro ,
    If it is processing the input file correctly through the Manul Import manager process then update your latest Map by using SAVE As option or else save this correct map with a new name altogether and use this new map in the port for automatic importing.
    If your file is able to process correctly through the Import manager without showing any errors till the Import step in the Import manager then this map must be correct and shoul automate the importing correctly.
    Provided you are using the similar file for automatic importing as well.The file name and the fields as well as the value mapping as saved in this corrected map must not differ with the input file else this saved map will not be able to import correctly.
    Check to see if you have made correct setting for automatic importing by refering the below link:
    http://help.sap.com/saphelp_mdm550/helpdata/en/43/12036df94c3e92e10000000a1553f6/frameset.htm  (Automatic importing MDIS - Import manager ref guide>MDM import server(MDIS)>MDIS Consfiguration)
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8973bcaf-0801-0010-b7a7-f6af6b1df00e(mdm import and syndication server)
    Also check the exception folders if your import is not taking place automatically:
    http://help.sap.com/saphelp_mdm550/helpdata/en/43/12036df94c3e92e10000000a1553f6/frameset.htm (Exceptions- MDM Import Manager MDIS-Exception handling)
    Hope It Helped
    Thanks & Regards
    Simona Pinto

  • Extend Inventory Management (0IC_C03) with new field MSEG-INSMK

    Dear Experts, We are using Business Content InfoCube "Material stocks/movements" (0IC_C03) in Area "Inventory Controlling/Inventory Management" in BW. We are using following Business Content DataSources: Stock Initialization for Inventory Management              2LIS_03_BX Goods Movements From Inventory Management        2LIS_03_BF Revaluations                                                            2LIS_03_UM Everything works fine with delta load till now. Now we have a new requirement so that we have to fill additionally the R/3-Field MSEG-INSMK in existing Inventory Management InfoCube (0IC_C03). The Business Content DataSource (2LIS_03_BX/BF/UM) doesn't provide R/3-Field MSEG-INSMK and I don't find any other Datasource for the R/3-Field MSEG-INSMK ("Document Segment: Material" - Stock Type). How can we extend the InfoCube 0IC_C03 with the R/3-Field MSEG-INSMK? Should I define a new Generic Datasource based on the table MSEG to extract the field INSMK. The table MSEG is very large. What would be Delta-Specific Field for Generic Delta? I would load the data from generic DataSource into a new DSO. And I can read the field MSEG-INSMK per Look-Up from the DSO in the transformation to the InfoCube 0IC_C03. Is this the solution? Many Thanks Moha

    2LIS_03_BX cannot be enhanced. There is an SAP note that says enhancing this Datasource is not supported.
    2LIS_03_BF can be enhanced though, and the process is just like enhancing any other LO Datasource.
    So you can include the new field in the cube, enhance BF and load to the cube. With this, you will be able to report the INSMK field on the goods movements. But as INSMK is not present in BX, you will not be able to report the INSMK field on stock position reports.

  • SAP Inventory management interface with Third party Warehouse System

    Hi Experts,
    Need your input for designing the SAP solution with existing Third party warehouse system ( Exacta ):-
    SAP ERP will be implemented for all locations of Client ( SAP MM, FI, PS , HR etc ).The Client has 10 distribution centres which are on Exacta Warehouse systems and will be linked with SAP Inventory management system.
    The way it will work - Goods receipt will always happen in SAP for all locations and then interface needs to Trigger subsequent Putaway activities at Exacta Ware house ( third party warehouse system) for those 10 locations.
    Goods Issue for these locations will happen from Exacta and then update will be posted in SAP via interface.
    All locations will be created as Plant /Storage locations in SAP.
    Need your inputs what special configurations need to happen in SAP for those locations so that goods receipt in SAP can trigger putaway activities in Exacta system .
    Do we need to do configuration for decentralised Warehouse in SAP for handling this?
    Pl. give your inputs based on your past experience where you handled such scenarios via interface with SAP Inventory management and legacy warehouse systems.
    Thanks for quick response on this.
    Regards,
    Krish

    Krish
    This is a std business process where clients have used their existing warehousing systems but implemented SAP forother functions such as Order entry, inventory mgmt and procurement, financials.
    The typical interface that needs to happen is
    1. Sales order ( and or delivery)
    2. Invetory needs to be passed to the WH. Typically people send it when SAP GR takes place.
    3. When WH system does picking, it sends signal to SAP which then does PGI for the sales order delivery and that takes the stock out of the system.
    Material master has to be transferred or mapped between two systems. Also, other elements need to be mapped between two systems.
    The way I have seen this happening is :
    you have an output on the SAP GR process. That creates an idoc to the WH system. Based on the capabilities of the WH system, it then does appropriate actions in the system.
    Many times, middlewares are used to translate/ map the data between SAP and the WH systems.
    So system wise, there is ALE setup that needs to take place for IDOC creations.
    Configuration and coding is required for the output type and the program behind it. There are several std FUnction Modules that can be used for this.
    Hope this helps.
    Mankai

  • SAP inventory management interface with third party warehouse

    Hi Experts,
    Need your input for designing the SAP solution with existing  Third party warehouse  system ( Exacta ):-
      SAP ERP will be implemented for all locations of Client ( SAP MM, FI, PS , HR etc ).The Client has 10 distribution centres which are on Exacta Warehouse systems and will be linked with SAP Inventory management system.
      The way it will work - Goods receipt will  always happen in SAP for all locations and then interface needs to Trigger subsequent Putaway activities at Exacta Ware house ( third party warehouse system) for those 10 locations.
    Goods Issue for these locations will happen from Exacta and then update will be posted in SAP via interface.
      All locations will be created as Plant /Storage locations in SAP.
      Need your inputs what special configurations need to happen  in SAP for those locations so that goods receipt in SAP can trigger putaway activities in Exacta system .
    Do we need to do configuration for decentralised Warehouse in SAP  for handling this?
    Pl. give your inputs based on your past experience where you handled such scenarios via interface with SAP Inventory management and legacy warehouse systems.
    Thanks for quick response on this.
    Regards,
    Krish
    Edited by: krishnendu Bhowmik on Nov 24, 2009 4:22 PM

    Hi experts,
    Any inputs on this .
    Thanks again,
    Krish

  • Travel management - problem with post a trip for an employee in India

    Hi,
    I am configure travel management for a customer, in there SAP system. I have already made the configuration for countries like Sweden, Finland, Italy, Germany etc, but when I should do it for India I can not save a trip in PR05. I have copied the configuration (schema) from Sweden to India (India has no schema in standard) and that is no problem, but when I should enter a trip and save in PR05 I have the following problem:
    1. It seems like I am in US because travelling country is per default USA (it should be India when I have linked the employee to the company code for India in transaction code PO13 and PA40). I can change the country to IN (India).
    2. When I enter an expense type and amount, the system have a tax code for USA per default (I have configured that this expense type should choose a tax code in India but the system choose one for USA). I can change it to an Indian tax code.
    3. The system also ask for a tax jurisdiction code on the row for expense type. Here I can choose 9999 as a dummy. But I have no idea why I have to specify that. I think that is typical for USA?
    4. When I have changed the country to IN, the tax code to an indian tax code and specified the jurisdiction tax code to 9999 and then save I have got the following error message:
    " Customization for 1600 j_1iindcus missing in table
    Message no. 8I303" and when I have googled on that error message I found that I should go to:
    IMG-Logistics General-Tax on Goods movement -India-Basic Settings-Maintain COmpany code settings
    but that is according to logistics and everything else in the system as purchase etc is working fine with no problem with tax jurisdiction code so I don´t guess that I should change anything there if I destroy anything else.
    5. If I change the country to IN and not register any trip expense but instead register trip segment, that the employee should have compensation for travelling with its own car and then save I have got the message that I have not maintained the currency USD/rupie which is a sign of that the systém beleives that we are in USA.
    Please help. I have no idea how to come around this.
    Best regards Lisa

    Hi again,
    In transaction code FITVFELD I have IN as default country but if I change that country to another I still have US as trip country in PR05. In that transaction code (FITVFELD) I have domestic trip, international etc (like configuration in Sweden), but when I initialize a new trip for India I can not change trip type, if there is a domestic or international. When I do the same for Sweden I can choose so I wonder if the system get the information from USA from anywhere else.
    I have also read about jurisdiction code and that is special for USA and Canada and then not for India?
    Regards Lisa

  • ME SDK 8.0 EA Device Manager - Problems with Serial COM-Connection

    I caught a first glimpse at the new ME SDK 8.0 - so far I have been working only with very old JavaME-Stuff on a Cinterion-TC65i-Chip.
    Want to connect my Raspberry Pi via serial COM-Connection with the SDK-8.0-EA-Device-Manager. (due to security reasons I'm not allowed to connect the Pi via LAN/Wifi)
    But the problem is the ME SDK 8.0 EA Device Manager only offers me COM4 (this is my built-in UMTS-Modem) - even though my target-COM-Device isn't busy at all.
    A serial connection via Putty and USB2Serial-Cabel (FTDDI) works fine and I can get on my Raspberry.
    Is there any reason or restriction I don't know for being unable to use my dedicated COM-Port? Or do I have to make any additional adjustments in hidden SDK-Property-files?
    In my opinion the device manager using COM should offer me the same possibilities as an IP-Connection regarding the target-device (transfering my Jad/jar to the device, installing them and starting them).
    There is something in the SDK-get-Started Docu about "Connecting to a UART Device" I'm not really cotton on . Is this information concerning me even though I'm using a Raspberry PI?
    To put my files manually via USB-Stick or Z-Modem on the PI is a tad of inconvinient.
    Any ideas? Or am I completely off track understanding your SDK-Tooling?
    Thx and best regards

    Hi,
    For the Raspberry Pi, tooling over serial port is not supported. The simplest solution is to use standard IP networking over Ethernet. This can be a direct connection between the PC and the Raspberry Pi, as long as the cable is twisted and the IP addressing is correct (e.g. manual IP addressing or DHCP server on the PC).
    Regarding "Connecting to a UART Device": This is meant for attaching and controlling serial devices from the Raspberry Pi, not for tooling connections between the Raspberry Pi and the PC.
    Hope this helps,
    -- Terrence

  • Dell XPS 15 Color Management Problem with "True Color"

    I recently purchased a Dell XPS 15 (6845slv).  Overall I have very happy with it...but have been getting frustrated with color management issues and was hoping to get some advice.
    Intermittently, the display had been changing the color scheme (to a suboptimal scheme).  It lasted for anywhere from a few seconds to a few minutes and then returned to the original (and more normal appearing) color settings.  It did not seem to happen while running any particular applications.  All drivers are up-to-date.
    I turned off the dell application "True Color" which I thought may have been making automatic adjustments to the color scheme and since turning it off the issue hasn't happened again.  However now I'm concerned that by inactivating that software, that I may not be maximizing the potential of the high quality HD display.  And now--though maybe it's in my head--the colors seem to be a little flatter since turning off True Color.
    Does anyone have any suggestions for getting the most out of the display? Has anyone had similar issues with True Color?  Any advice would be appreciated.
    Thanks for your help.

    I ended up fully uninstalling it from programs and features...I haven't had the problem since.  I've been happy with the display since making this change.

  • Power management problem with USB modem

    I now use a MS-6743 (i865G) board. My previous board was MS-6533, it did not have USB v2.0.
    The problem is my Aztech (originally Smartlink) USB modem prevents the system going into standby mode but this should be a USB 2.0 issue because I'm using the same driver for the modem like previous mainboard config. I could go into standby mode flawlessly with my old board.
    Furthermore I'm using USB keyboard, mouse but no power management property dialog box appear for those devices. So I'm pretty sure the problem is because of USB 2.0. Is there a way to come around this issue? Thanks in advance...

    To pin point whether or not IRQs conflicts is to be blamed, please kindly post your IRQs conflicts for us to verify.
    A signature of your system setup will proves greater help for others to advice you with more accurate directions and benefits you in the future.
    Please read this  Moan Guide too.

  • Nokia music manager problems with Nokia 6230 model...

    Hello. Recently I installed the newer version of nokia PC-Suite, the version 6.8.22. I have a nokia 6230 model HS-12 with HS-3 handsFree attached. Make the connection via Bluetooth (SMC USB Bluetooth) over a Windows XP SP2 system. The connection works fine.
    The problem arrives with the new MusicManager software.
    First, the playlists that this program creates, generates a error in mi phone. It says "Invalid tracklist". Surfing the web, the problem was that MusicManager generates the playlist entries (in the phone) refers to C:\ and D:\ (this for the MMC), when the phone internally works with unities A:\ and B:\. Changing "manually" the playlist it works, so if any people with design responsabilities read this, please take note.
    Second, when convert my .MP3 files into .AAC files, the program converts the files into a .AAC but in MONO !! The music only sound in one channel, when the .MP3 is full stereo. Really, the conversion is in Stereo, but only converts one channel. The other remains muted. I have no idea of this problem. I listen the "mono" files in any Windows player, even at the phone.
    If any people can help me, or have similar problems, or need more information please make a reply.
    Thanks.

    Hi
    The tracklist stuff with 6230 (Ive owned a 6230 before) is a very difficult procedure, because it is not a drag and drop process from PC to phone. You have to giggle and dive onto the Audio Manager app in PC Suite where you have to find the Playlist folder in your phone memory and place all playlists there to be able to be recognized by the phone. Simple drag and drop will not work (like the m3u is in the MMC).
    About your mono problem, I haven't checked out this feature of Music Manager because I still think its purely buggy even of the newer features and new face it has now. Better use other music software to transcode your MP3's such as dbpoweramp's Music Converter software (its free trial for 30 days, after that the MP3 encoding and Power Pack features are useless, if you download other codecs, you can use them after the trial.)
    cheers.
    The world might be a better place if you were I.

  • Session management problems with SSO

    Hi all-
    I've been getting an Apex app tied to SSO as a partner app (per http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html). So far, it sort of works. If I go to my apex app, it redirects me to SSO, where I authenticate and end up back in the apex app. Great. Here are two problems I've run into:
    1. If I am already authenticated to SSO, and I go to my apex app (url like: http://host/pls/apex/f?p=101:1), my browser goes into an infinite redirect (url like: http://host/pls/apex/f?p=101:1:::::FSP_AFTER_LOGIN_URL:\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|\\\\\\\\\\\\\\\\\\\). To resolve, I have to clear cookies.
    2. If I am using my apex app, then log out of SSO (in another browser window), I can still click around in my apex app (i.e., apex thinks I'm still authenticated).
    Anyone have any thoughts? I'm wondering if I need to do something in page session management (under authentication schemes) to fix #2, but I have no clue about #1.
    Thanks
    Rob

    Hi Scott-
    Thanks for the info on #2 - I'll work on that after I get #1 sorted out, since it's the more dire problem. Here's some more info:
    Apex version = 3.0.1.00.08
    SSO SDK = ssosdk902.zip
    I set it up as "My Application as Partner App." I used "MY_PARTNER_NAME" as SSO Partner Application Name. In the list of SSO Partner Apps on the SSO Admin page, my partner app name is also MY_PARTNER_NAME. It gives the following info:
    Login URL:      https://sso_host/pls/orasso/orasso.wwsso_app_admin.ls_login
    Single Sign-Off URL:      https://sso_host/pls/orasso/orasso.wwsso_app_admin.ls_logout
    Home URL: http://apex_host/pls/apex
    Success URL: http://apex_host/pls/apex/RBLICK.YOUR_PACKAGE.PROCESS_SUCCESS
    Logout URL: http://apex_host/pls/apex
    RBLICK is the schema owning the apex app. In there, I created a package called YOUR_PACKAGE:
    create package YOUR_PACKAGE as
    procedure process_success(urlc in varchar2);
    end YOUR_PACKAGE;
    CREATE PACKAGE BODY YOUR_PACKAGE AS
    procedure process_success(urlc in varchar2) as
    begin
    wwv_flow_custom_auth_sso.process_success(
    urlc=>urlc,
    p_partner_app_name=>'MY_PARTNER_NAME');
    end process_success;
    END YOUR_PACKAGE;
    Anything look obviously wrong to you?
    Thanks!
    Rob

  • How to match the BI Inventory Management reports with MB5B?

    Hi All,
    In BI we have two reports which shows the Quantity, Value and count of the valuated GI and GR movements happened in the inventory at a material-plant level for a given day. Both the reports are built on the cube 0IC_C03(Material Stocks/Movements ). We need to display only those movements which has a value associated with that. Ideally it should match with the R3 report MB5B for stock type "Valuated Stock".
    For example,
    For movement type 311(storage location to storage location) there are no accounting documents associated with that. Still in the data source it has field u201CStock categoryu201D(BSTTYP) as blank, which indicates that it is a valuated stock. And hence that record is displayed in the BI report. But In MB5B there are no entries for that movement type as there is no value associated with that.
    Similarly for movement type 101 (Goods receipt) the stock category, BSTTYP in the data source indicates that it is valuated stock, where as MB5B eliminates those which has no value associated with that.
    This is causing a mismatch between the R/3 MB5B and the BI Reports. Is there any method to match the BI reports with the MB5B report in R3?
    Thanks in advance,
    Alpho

    Hello,
    Please cross check with MM consultant and take the logic of MB5B and implement same in BW Query Level can help you to match the values.
    Thanks.

  • Desktop manager problem with upgrade software

    Hi There,
    When i connect to the desktop manager it says that my device should be updated with the new software but then it runs through the program then says that it does not need to.
    I have the Pearl 8120 and its running on version 4.5.0.174. is this the most upto date software or does it need updated???????
    any help would be great
    Alan

    What version of the Adobe Application Manager are you using?  Which operating system are you using?

  • Performance Manager Problem with Starting

    Hello
    I am new to Administration and have a proplem in OEM Diagnostic pack related with Performance manager, any help in this regard is highly appreciated...
    I am not able to start datagatherer on my system with windows 2000 professional edition.
    every time i try to start the service OracleOraHome8IDataGatherer I get
    Error:1067: The process terminated unexpectedly.
    and at Performance manager I get
    VTM-0005 error connecting to server
    java.net.connectException: connection refused..
    Also i encountered an error during installation of diagnostic pack.
    OLE initialize of OCX load error while registering OCX
    output of InstallActions.log
    Starting install install phase 1 of component Oracle Enterprise Manager Packs and Management Infrastructure
    Calling action w32OcxRegActions1.7.0.17.0 RegisterOCX
         OcxPath = C:\Oracle\Ora81\bin\mmdx32.ocx
         WorkingDir = C:\Oracle\Ora81\bin
    Exception thrown from action: RegisterOCX
    Exception Name: ErrorRegisteringOCXException
    Exception String: OLE initialize or OCX load error while registering OCX
    Exception Severity: 0
    Exception handling set to prompt user with options to RETRY IGNORE
    User choice : Retry

    Increate the virtual memory and try to start the service here:
    SELECT START > CONTROL PANEL > ADMINISTRATIVE TOOLS > SERVICES
    Joel Pérez

Maybe you are looking for