Inventory - Overhead added at each assembly stage

hi Guru,
: Inventory - Overhead added at each assembly stage
I have had a look into the BOM for the product code #####-######. At each assembly stage of the product overhead is added on. This is grossing up each time, meaning that the BOM and cost in stock is too high.
Would it be possible to amend this?
A sub assembly of materials and labor+ overheads, rolling to a material cost in a higher sub assembly or a manufactured part, and the overhead / labor being surcharged on the whole.
This is causing a snowballing effect. It seems that the part number he refers to has no stock so I think the effect should be nothing as of now, but we need to fix this

the problem is you have overhead under the each material ,labor and setup of the BOM
In product costing when you do the routing for the BOM please remove the overhead and at aty the time of finished good.
so that as meny time the BOM passes through each work centres the overhead cost should not keep piling on the material
which further increases the cost
I hope this would resolve the issue

Similar Messages

Adding objects to the stage & acceessing stage properties - I'm a bit confused..

Hi,
I'm a little confused on two fronts regarding display
programming:
A. What the best way to add objects to the stage?
B. How to access stage properties.
I can do both of these when the project is an 'Action Script
Project', but I'm having trouble when it is a 'Flex Project' (e.g.
an MXML file). See the two attached files with questions included
in the comment to see exactly what I mean.
A. What the best way to add objects to the stage?
=====================================
In an action script project that extends Sprite I can just
call addChild()
In an MXML project I can add objects to the stage by first
adding them to a UIComponent, then adding that to the stage.
1. Is that the best way to do it?
In this doc:
http://livedocs.adobe.com/flex/3/html/help.html?content=05_Display_Programming_02.html
it says that
quote:
Each SWF file has an associated ActionScript class, known as
the main class of the SWF file. When Flash Player opens a SWF file
in an HTML page, Flash Player calls the constructor function for
that class and the instance that is created (which is always a type
of display object) is added as a child of the Stage object. The
main class of a SWF file always extends the Sprite class
2. why cant I just add a sprite object direct to the stage
without the UIComponent?
3. What is the 'main class', and how can i get access to it?
B. How to access stage properties.
=========================
In an action script project that extends Sprite I can just
call trace(stage.framerate)
But in an MXML file I cannot figure out how to access the
stage properties.
See the attached code for the things that I tried, but which
didnt work.
In the page:
http://www.actionscript.org/forums/showthread.php3?t=140655
It says
quote:
For stage access you have a couple of rules:
* natively, only display objects have inherent access to
stage
* display objects only have a valid reference to stage if
they're within the stage's display list (on the screen, after added
to it with addChild)
* The only display objects which immediately have access to
the stage before the use of addChild (in their constructor) are the
document/application class instance (root) and any instance from
the library placed on the timeline (not created with AS).
* Non-display object classes have to be passed or assigned a
reference to the stage from another object which already has access
to it - they cannot access it otherwise.
4. How do I access the stage properties in the MXML project?
5. I suspect this is related to the "main class", which I
dont yet understand - is it?
Sorry for the long post.
cheers
tom

"tom saffell" <[email protected]> wrote in
message
news:gd7cm9$d1v$[email protected]..
> Thanks Luigi - that helps a lot.
> I hadnt seen the Flex 3 Developer Guide before - it's
very useful.
>
> I now see that I can access properties of the
application object directly
> with
> this.<property>.
> However, the framerate property cannot be set by
actionscript, only in
> MXML (I
> can set it in the <mx:application> tag). But I
need to be able to set it
> programatically, dependent on user input.
>
> 5. Is there a way around this?
> 6. Can I set the stage's framerate to achieve the same
outcome?
>
> I still dont understand why I cannot access the stage
object. When I call
> either
this.stage or
uic.stage * then I get
quote:
Cannot access
> a
> property or method of a null object reference.
My understanding is
> that I
> can access the stage object via any display object on
the display list.
> I'm
> confused about this bit..
>
> * - uic is a UIComponent that has been added to the
display list (i think)
> by
> calling addChild(uic) from the AS3 within the
application
>
> 7. How do I access stage properties in AS3 in an MXML
project?
http://www.adobe.com/livedocs/flex/3/html/help.html?content=05_Display_Programming_10.html
It seems like possibly your real problem is that you're
having trouble
searching the Help effectively:
http://flexdiary.blogspot.com/2008/07/getting-help-in-flex-builder.html

Exception in CMS when transporting the Components in the assembly stage

Hi,
I am getting the following exception in CMS when transporting the Components in the assembly stage:
com.sap.cms.tcs.interfaces.exceptions.TCSFileCreateException: cannot create file:*****.sca Error adding file *****/pr_deployarchivedr/TestDc.sda to archive.
File was already added before.
Any pointers to resolve the exception will be helpful.
Regards.
Rajat

Hi Rajat,
two things causes this type of error.
1) Check whether the systems are in SYNC or not(patch level, versions).
2)Check whether the dependencies are transported or not to assemble tab.
Regards,
Anil.

Managing a set of documents that require approval, for each project stage

Good day to all,
I am new to SharePoint but I have dived in head first due to my job.
The users I am dealing with need a solution where they can upload a specific set of named document types (example: project charter, site plan, schedule, costing approval, designs) but all documents will be scanned to PDF before being uploaded. Every stage
will have its own set of documents with the same named document types. Each document has to be checked and the approved.
I know I can use a workflow for the check and approve part.
What I don't know is how to create a "blank" document set for uploading PDF files. In other words, I envisioned that I would have a document set of sorts where I can enter common information such as the Project Number, and the Project stage, and
then I would have multiple upload fields that are named by the types above (project charter, site plan, etc.) so that the users will know exactly what documents are needed to complete the document set.
Can anyone assist me in find a solution?
Thanks and best regards.

Hello,
One thing to note is that the document set content type in SharePoint is analogous to a folder; you don't specify upload fields on the document set, but users can upload any number of documents to the set once it is created. You can have fields of information
on the document set, and different fields of information on the documents within the set.
With that in mind, the best way to accomplish what you're looking for may be to have columns on the document set that indicate which required documents have been uploaded.
Document Set content type columns:
Project Number (text)
Project Stage (choice)
Project Charter Complete (yes/no)
Site Plan Complete (yes/no)
Schedule Complete (yes/no)
Costing Approval Complete (yes/no)
Designs Complete(yes/no)
Document content type columns:
Document type (choice)
It can either be a manual step so that when a user uploads a document, they then mark the corresponding yes/no checkbox, or it could be automated with a workflow.

Why is a space always added after each img ?

Hello,
I have an input TextField, in which I want to add text and images. But each time I add a new image in the textField (via an <img> tag), a space character is added after every other <img> in the TextField. Why is that ?
You can test it for yourself :
function test():void
            var tf:TextField = new TextField();
            tf.multiline = true;
            tf.text = "Hello World";
            trace("1/ tf.length", tf.length);
            trace("1/ tf.text", tf.text);
            trace("1/ tf.text.length", tf.text.length);
            trace("1/ tf.htmlText", tf.htmlText);
            trace("1/ tf.htmlText.length", tf.htmlText.length);
            var htmlText:String = tf.htmlText;
            htmlText += "<img src='image.gif' id='0'/>";
            tf.htmlText = htmlText;
            trace("2/ tf.length", tf.length);
            trace("2/ tf.text", tf.text);
            trace("2/ tf.text.length", tf.text.length);
            trace("2/ tf.htmlText", tf.htmlText);
            trace("2/ tf.htmlText.length", tf.htmlText.length);
            htmlText = tf.htmlText;
            htmlText += "<img src='image.gif' id='1'/>";
            tf.htmlText = htmlText;
            trace("3/ tf.length", tf.length);
            trace("3/ tf.text", tf.text);
            trace("3/ tf.text.length", tf.text.length);
            trace("3/ tf.htmlText", tf.htmlText);
            trace("3/ tf.htmlText.length", tf.htmlText.length);
Before the first image, the text equals "Hello World" (as expected)
Before the second image, the text is "Hello World\r "
And after the second image, it is "Hello World\r \r "
So there are two spaces after the first image. And if you add a few images in the initial htmlText, they will have two more spaces at the end of the function.
Does anybody knows why is it, how to disable this behavior, or simply fix it ?
A big thanks to the one who can help me, I'm really stuck with this.

http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/text/TextField.ht ml#condenseWhite

Specify duration for each assignment stage in an approval task - sharepoint designer workflow

HI
I am trying to create an approval workflow in sharepoint designer. How do I configure different duration for each participant in a approval task .?

I had a similar issue. Best way I found was to go into the 'Before a Task is Assigned' of the task and then Set Task Field Due Date - to the date needed. If you need to get into specific time of the day, it presents additional issues. First the
workflow doesn't have a 'current time' function. If the task is being created at the start of the workflow, you can use Workflow Context Date/Time started and calculate from there. If you are adding a task, or the
task is occurring after a previous task, you can make a workflow field and on the 'When a Task Completes - assign it the value of Current Task Last Modified. Also, it seems their is bug where it doesn't recognize the
time-zone correctly when you update the Due Date in the workflow process. So if you see unexpected results for the time in the duedate value, may have to adjust for however many number of hours your timezone is from GMT.

Inventory issue to be at assembly pull?

Hello,
our customer manufactures serialized computers. they are using Mobile Applications (mwa) as they need to serialize first the assembly, and then to associate component serial numbers.
they need to have Operation pull backflush, as they scan every serial number of the component they introduce into the computer. but they want the inventory issue to happen only when assembly is completed. they need a mix between operation pull and Assembly pull. they cannot use Assembly pull although they want to have the component inventory issue at the completion of the assembly, because they are not able to scan the components serial numbers at the end of production (when the computer is ready, and the components are assembled, they do not have access to the serial number of them).
Any idea how we could manage this situation?
thank you

I don't think that is possible out of the box.
Your best bet is to capture the serial numbers in a custom table. That can be done by the assembler scanning the work order number, operation number, item# and serial#.
And then use that data at wip completion (will require custom code).
Hope this helps,
Sandeep Gandhi

When paste to vim xterm, blanks lines are added after each line

Need expert's help:
When I copy from windows Firefox to my vnc's vim xterm, somehow after each line, several blank lines are added after every single line/paragraph. This is really annoying!
I don't know how to solve it. I changed a my .vimrc to a very simple one, still not working.
thanks!
Qian

You may have a fileformat problem. I'm pretty sure this will work but I only did one small test.
To display the current vim fileformat – this should return either 'dos' or 'unix'.
:set ff
Vim usually correctly sets the fileformat automatically upon opening a file but will default to using 'unix' if the format can't be determined. After pasting the text, try the command,
:update
'update' will save the file only if changes to the buffer have occurred. This command may change the fileformat and all the line endings are now CR-LFs (CR=carriage return; LF=line feed). Check the fileformat again with
:set ff
If ':update' didn't change the line endings, or the file is now a mix of CR-LFs and LF-only line endings, try this,
:e! ++ff=dos
This should force rereading the buffer as a dos (Windows) format and properly display the lines. All line endings should now be CR-LF. You can then manually set the fileformat to 'unix' with
:set ff=unix
and finally, save the file with
:w

Converting Canon 5D Mark II footage after the assembly stage

I should have done my research ahead of time, but lesson learned.
I've got a 19 minute assembly of my short film completed and have already started in on the rough cut, all in the 5D's native H.264 format. The glitchiness on my MBP i7 seemed odd but I was in the zone. Finally I decided to look into it and now I've been left to figure out how to get the work I've already done preserved while I convert all my footage to ProRes 422.
I tried sending my entire bin's worth of clips through Compressor, but of course they all came out with filename's matching what I'd renamed them in the bin, so going the reconnect media route was a no go unless I wanted to do it one clip at a time, which I tried but even then I was having weird errors where the wrong clips were reconnecting - probably to do with us shooting on two cameras, and some of the file names overlapping? Hard to say exactly, but I decided to move on to a different approach.
Now I'm converting the clips straight from the finder, one camera folder at a time so as to avoid any weird overlapping/rewriting glitches since I'm making sure the original file names are preserved.
This way, when I go to reconnect media, I can point the clips from each camera to their respective folder in Finder and they will all go at once (I tested it with a small batch and it worked fine, right down to them being replaced in the sequence with the right ins and outs).
I'll post an update when the whole job is done. I'm thinking it should work out, but you never know.
If anyone has any suggestions for how this could have been done differently (apart from, you know, doing it right the first time), please feel free to share. I'm hoping this will serve as a helpful thread to anyone who, for whatever the reason, finds themselves in a similar situation.
Cheers!
Darcy

Thanks for this!
One minor distinction with my project is that with two cameras we wound up with two sets of clips with filenames that for the most part were duplicated, so they had to be kept in separate folders, meaning an extra couple of steps in running through Compressor and relinking in FCP so as to avoid the wrong clip relinking with the wrong footage.
The important thing is to make sure the encoded footage keeps the same filenames as the source. I'm not sure if it's necessary to move the source footage anywhere, or to put the newly encoded footage in the same folder the source footage lived in. When I relinked my footage, I simply had to choose the Locate option, which would find the original footage, then navigate to the folder where the ProRes footage lived and it grabbed onto all of it without a hitch. I had to do this for each camera's folder, which was a bit of a pain since I hadn't kept them separate in my project bin, but with a little due diligence it worked out perfectly.
Case in point, my project is now back up and running with the ProRes footage, with all my sequences preserved. Like you said, all I did for the final step was change the sequence settings to ProRes and now everything is as it should be. Footage plays back smooth, even in full screen, edits are clean and effects play back properly.
And here I was thinking my MBP i7 wasn't up to snuff. Almost feels like a new system again.
About the suggestion to go LT over HQ, I'd like to direct you to this article on the matter.
In a nutshell, the naked eye can't tell the difference, but if you had to do any keying you'd run into problems with the lower quality LT footage.
Personally, I think you should always work with the highest quality footage you can. The only real concern HQ presents over LT appears to be file size, so unless you are on some sort of super tight budget, or are working with a mountain of footage across multiple projects at once, then this shouldn't be reason enough to go LT over HQ. I have a 2TB drive dedicated solely to my short film (and a second one for backing up), so I can't see any good reason for opting for lower quality footage. Even if your naked eye can't tell the difference, you'll be kicking yourself later if you need to do something with that footage that the HQ option would have better suited towards.
Thanks again for the response!
Anyone else care to chime in?

Video not showing after adding more assets to stage.

Hello Everyone,
Why does Edge Animate not display the embeded video when I add more than 2 assets to the stage?
In the graphic below, I am building an animation with a total of 6 assets on the stage.
#1 - Curtain (.png)
#2 - Table (.png)
#3 - Picture frame_1 (.png)
#4 - Picture frame_2 (.png with a empty/transparent center)
#5 - Picture frame_3 (.png)
#6 - Rectangle
I introduce #1 to the stage, draw a rectangle (#6) and I embed a video by using .js from edgehero.com. I test the animation and the video works fine.
As soon as I add any other asset to the stage (#2, 3, 4 or 5) and test the animation, I can hear the movie playing but it is no longer visible.
I have tried arranging the other assets behind #6. I have placed the additional assets away from asset #6 so that they dont overlap, however, the video problem appears as soon as I add a 3rd asset to the stage.
Does anyone know what is causing this issue?
Thank you in advance and kind regards.

update::: figured out that the video was somehow corrupt. doesn't make any sense... but i just deleted and reloaded it and it works now...
new issue ::: when going to burn the DVD ... now i keep getting into the 20% range and then it says "video bitrate too high" ... so i've adjusted that repeatedly on the preference menu of studio pro ... and still getting the same issues.

Adding images to the stage

Hello,
I am currently working on a photo gallery which reads an XML file and load all picture from it. I am doing all by AS3 by adding bitmapdata to the container by loader object. What I want to do is when I add these images they behave like a button, by enabling hand cursor and pointing to a specific frame or an URL when I click on it. How should I proceed with the script to do so ? (Create a button or a movieclip which can be clicked and all this on a dynamic way)
Thank you all guys !

Hey kglad,
Thank you...that helped !

Inventory cube adding fields

HI,
What If I will add two new fields(key figures) to the standard inventory cube 0IC_C03.
These two fields for opening stock, closing stock and end value.
regards,
Balarm

Hello Srikar,
To populate those 2 fields for the History data:
1 If you have those 2 fields coming in from some Master Data, then you can probably have a look up to those master data and load the fields.
2 If you have those fields coming from modified Datasource, then you have to delete and reload the data to have those fields populated in the Cube.
I hope this helps.
Regards
Rohit

Will adding a custom assembly to SQL Server void the Microsoft Support contract

I've been thinking about extending the capabilities of the SQL Servers that house our System Center databases to add in additional simple functions that could be used in a lot of reports.
My question is, would importing a custom assembly void the warranty?

This question better ask at MSFT Support.
But, AFAIK, no, this should be supported case. But this is just MY PERSONAL opinion.
SCSMSolutions
email: freemanru (at) gmail (dot) com

Adding a shape to Stage using AS3

I'm trying to add a rectangle to the stage.
I've imported the following...
ActionScript Code:
import flash.display.Shape;
I then instantiate my shape variable in my Document Class...
ActionScript Code:
public var floatArea:Shape = new Shape();
And finally I set the position, size and colour of my rectangle then add it to the stage in my Class Constructor...
ActionScript Code:
floatArea.graphics.drawRect(40, 400, 1120, 170);
floatArea.graphics.beginFill(0x000000);
stage.addChild(floatArea);
So why isn't the rectangle showing up on my stage?

Sorted it now!
The tutorial I was looking at said that in some cases you don't need to add .graphics.endFill();
However, in my case I did! I also had to put the .graphics.beginFill(0x000000); first, then the drawRect command. Not sure why this is, must be some syntax rule Actionscript has...it's a Sunday so can't be bothered thinking about it too hard!
Anyway, here's the code I used to get it working...
ActionScript Code:
floatArea.graphics.beginFill(0x000000);
floatArea.graphics.drawRect(40, 400, 1120, 170);
floatArea.graphics.endFill();
stage.addChild(floatArea);

How to update the Notes Field with default information that will be added to each new VM created?

How do I add default information to the Notes section of each new vm created: Basically want these 3 questions answered in the notes after the VM is created. Owner: Application: Prod/Dev: Can this be done in the GUI/Console? If so, how?Ho

So you just want the labels to be there, not the actual values.
Then you could use the Notes parameter on the New-VM cmdlet, something like this:
New-VM -Name TestVM -VMHost $esx -Datastore $ds -Notes "Field1: dummy`nField2: dummy`nField3: dummy"
The <back-tick>-n in the string is a new-line

Inventory - Overhead added at each assembly stage

Similar Messages

Maybe you are looking for