Investigate Internal Error

Trying to investigare the error´s below but no solution was found. Would be grateful for descriptions and possible solutions. My front panel does not update (redraw) its lower part on the sceen. Same thing when not running the vi and then also the right vertical scroll bar does not work. Here are the errors to investigate:
fpsane.cpp (401)
KCode.cpp (509)
BadLinkerObjs.cpp (195)
support.cpp (6165)
Attachments:
front_panel_not_updated.JPG ‏268 KB

Sadly, there are bugs (!!) in LabVIEW, even if you are using the Spring (Service Pack 1) release. If LabVIEW crashes on you, it generally suggests you allow it to send an Error Report -- go ahead and do that, as (if nothing else) it alerts the Developers to on-going problems. In my (limited) experience, trying to track down the errors yourself is rarely productive -- most of the reported failures seem to be deep inside LabVIEW's "internals".
If you keep getting errors, and if you can figure out the "trigger" for the error, then it is not unreasonable to call NI's Support line and ask for help. If you can find a small piece of code that reliably causes the error, you can ship this off to the Applications Engineer (who can then bring it to the Developers and say "Here, Fix This!"). I've managed to find a few demonstrable "bugs", some of which were fixed in the subsequent Release ...
Bob Schor

Similar Messages

Fatal Internal Error source/manager/thread.cpp line 3472 while starting LabVIEW

When I try to begin LabVIEW 7.1.1 on my mac OS X 10.4, I see the LV logo and then I get the pop-up window:
LabVIEW.app Alert
Fatal Internal Error: "source/manager/thread.cpp", line 3472
LabVIEW version 7.1.1
You will lose any unsaved work. For assistance in resolving this
problem, please relaunch LabVIEW, or contact National Instruments.
When I click on Continue, it kills LabVIEW. I also get 2 other
windows...one says Investigate Previous Internal Error...which does not
do anything, irrespective of what I click in that window.
The other window is called Controls.
The last message I see on the LabVIEW splash screen is Server: Exported VIs list ok.
The LV website says I need to make DLLs re-entrant, but I can't even begin LV to solve this problem.
Any suggestions?

Hi Enduro,
I would suggest creating a service request for this problem at ni.com/ask. The Applications Engineer will be interested in looking at the error log that is being created, so that we can determine if this problem has occurred before.
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments

Bug report: ube_ipa: internal error when compiling with -xO5

When compiling imlib2-1.1.2, one source file causes compilation to fail with the following error message:
ube_ipa: internal error
cc: ube_ipa failed for loader_tiff.c
The command which fails is (probably wrapped):
cc -DHAVE_CONFIG_H -I. -I. -I.. -I. -I.. -I../src -I../loaders -I../libltdl -I/usr/X11R6/include -I/usr/openwin/include -I/opt/csw/include -I/opt/csw/include -I/opt/csw/include -g -fast -xarch=386 -xstrconst -v -xildoff -xO5 -c loader_tiff.c -KPIC -DPIC -o .libs/loader_tiff.o
Changing -xO5 to -xO4 works around the problem. The source file in question is imlib2-1.1.2/loaders/loader_tiff.c
Patch 112756-10 has been applied, and doesn't correct the problem. GCC doesn't have any problem compiling the file.
A quick note to any Sun employees reading this: it took me 45 minutes to find somewhere to submit this bug report. Searching sun.com for "submit bug report" turned up many forum postings where people asked "Where do I submit bug reports?", a bug report form for Sun One Java Studio, and not much else. It might be in your interest to make submitting bugs easier.

Internal errors, such as the one you encountered, are generally considered compiler bugs. They indicate that the compiler reached an unexpected state and therefore bailed out. I opened bug 20703141: internal error: pic_relocs(): hh reltype? to investigate. I see the same error message emitted by the current Studio development release; I will update this thread if I find a work-around.
Thanks,
Mark

How do I find out what the internal error was?

I got a fatal internal error when I pressed the "Show Errors" button under Windows->Show Errors menu option.
Silly me, I didn't write it down. When I relaunched LabView, it offered to go and try to diagnose the error,
but not I can't find any trace of what the error actually was! Obviously, I should have written it down,
but why didn't Labview also record the error?

Hi Doughera!
When you say: "When I relaunched LabView, it offered to go and try to diagnose the error", do you mean that LabVIEW gave you the option of Investigate Now, Investigate Later, & Do Not Investigate? Assuming this is what you are referring to, by choosing either Investigate Now or Investigate Later, LabVIEW will generate an error log .txt file. This file is automatically placed in your My Documents\LabVIEW Data\lvfailurelog folder.
Hope this helps!
Travis H.
National Instruments
Travis H.
LabVIEW R&D
National Instruments

ORA-00600: internal error code, arguments: [ttcgcshnd-1], [0], [], [],.....

Hi,
While connecting with database, I got the following error,
ORA-00600: internal error code, arguments: [ttcgcshnd-1], [0], [], [], [], [], [], []
I am using oracle 9i. Can anyone tell me the solution of that error ?
Thanks and Regards,
Hiren

many people are here because they lack that optionIt's not false, indeed, but if nobody had the same error, there is no chance to solve it.
At least a complete system/operation description is necessary to indicates some valid ways to investigate.
Nicolas.

SQL*Loader-704: Internal error: ulconnect: OCIInitialize [1804]

I tried using MassLoader to load some data into the local database on the Oracle 9i server. MassLoader first generated the data files and then called sqlldr to load the data into the db. It failed and I received SQL*Loader-704: Internal error: ulconnect: OCIInitialize [1804]. I tried with Oracle 8i sqlldr and it worked fine. So, the problem seems to be with Oracle 9i sqlldr. Is there any fix for this or how can I investigate it? Thanks in advance.

The problem lies in permissions in $ORACLE_HOME. I had the problem and came up with two solutions. The first was to chmod 6751 sqlldr. The second I liked better was to go thru the subdirectores and insure that all of the files were marked as accessable by others. After talking with fellow dba's we changed the permissions to 755 on all directories but bin. Again this might not be the correct fix but it works
try again after changing
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
to
ORA_NLS33=$ORACLE_RDBMS/ocommon/nls/admin/data
try above solution and let us know.

Windows server 2008 R2: The following fatal alert was generated: 40. The internal error state is 1205.

On my app server which is win2008R2, no IIS installed, I kept getting these errors:
"The following fatal alert was generated: 40. The internal error state is 1205." - Event ID 36888
"An TLS 1.0 connection request was received from a remote client application, but none of the cipher suites supported by the client application are supported by the server. The SSL connection request has failed." - Event ID 36874
I did a few search on google but they mentioned about the SSL. However, my server has no SSL installed. We don't have a need to put SSL on the app server. Any help will very appreciated.
-vecon

Simply ignore the message then.
If you would like to investigate further, you will need to identify the source of the TLS connection. If this is not logged in event viewer then you could give a look to IIS logs or simply use a Network Sniffer like Wireshark to inspect the traffic.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

"investigate previous internal error" every time I start LV 8.2.1

Hi,
Every time I start LV 8.2.1 I get a message "The last time you ran LabVIEW, an internal error or crash occurred at fpsane.cpp, line 401" and it asks if I want to investigate now. I don't have any problems while running the application, compiling it or building an installer. Does anyone have any idea what this is and if it's important?
Thanks,
Danielle
"Wisdom comes from experience. Experience is often a result of lack of wisdom.”
― Terry Pratchett

Although the VI runs, it may have a strange entry somewhere.
I did get that message a couple of times. From what I can recall it was when running omething & I had to kill the execution, or shut down LV completely. Upon re-start of LV a similar message popped up. The message did not re-appear at the next start. Maybe I inadvertently fixed it without knowing..
Try loading your VI, running it once. Saving it. Shut down LV. Restart LV. And check to see if the message continuous to appear. (you may have to repeat the steps once).
Oh... Do you have any Disable Structure which has some unfinished code iside it? I do recall that... Who knows.. (???)
RayR

Internal error when trying to preview slideshow

Hi all, this seems like an error a few people have had but I cant seem to find an answer for this.
Regarding Lightroom Slideshow module: When I click on the preview button I get the following error:
An internal error has occurred: ?:0: attempt at index a nil value.
This occurs with any group of images I select in my catalog.
I feel this is due to a permissions fault. I was previewing slideshows fine until yesterday when I deleted one of the users profiles on my windows PC. Since then the problem has occured. I now have only one user profile (password protected admin).
Anybody any help? This is a real pain and I'm having to wait a long time exporting slideshows rather than a quick preview.
I've tried in LR5 and the newly downloaded LR CC.
Any help appreciated.
Regards,
Dan

Hi there,
Are you able to reproduce the issue consistantly with the project. Can you please ask your coworker to publish a blank project and see its working fine or not?. In case if the issue is project specific, then can you please send the .cptx file to us so that we can investigate the issue at our end. Please upload it to a shared workspace(Acrobat.com) and send me the link at [email protected]
Thanks,
Nimmy Sukumaran.

Getting "internal error" when trying to publish

Help please I've been working on this site deligently. Then all of a sudden I cannot preview or publish my file. Every time I try to preview I get "internal error" does any know what's going on? Please help.

Hi,
Please provide us the complete error message you are getting, possibly a screenshot and we'll further investigate the issue.
Regards,
Aish

Internal error or labview crash in 7.1ver thread.cpp(2842) whats reasons and how to fix it

Hi
Everybody ,
I am working with pci-6723 and labview 7.1 yesterday when iwas testing , the programme was running , suddenly the power has gone , since i have not connected my system to UPS system got shutdown , and when i booted pc its higlighted this error , now to what extent this problem affects to my software, and how to fix it.
"Internal error or labview crash in 7.1ver thread.cpp(2842) whats reasons and how to fix it"
Thanks in advance
Rajesh

Hello Rajesh,
Do you get this error frequently or you got it only once after the power shutdown? Are you making a call to a DLL in multithreaded environment? Try mass compiling the VI by going to Tools->Advanced->Mass Compile. Also please follow the suggestions provided in this knowledge base entry regarding thread.cpp and see if that will fix the problem:
http://digital.ni.com/public.nsf/websearch/01B186B5CEB1D07786256747000F4319?OpenDocument
If you continue to have this error, is there any way you can send me a pared-down example demonstrating what your program does, so I can at least investigate to see if I can narrow down the cause of the thread.cpp failure?
Thanks and good luck!
Shakhina P.
National Instruments

Weblogic.management.ApplicationException: - Internal Error

Hello,
When deploying a EAR, I get the following exception:
[Deployer:149033]preparing application esb on <xxx-admin>
[Deployer:149033]failed application esb on <xxx-admin>
[Deployer:149034]An exception occurred for task [Deployer:149026]Deploy application esb on <xxx-admin>.: Exception:weblogic.management.ApplicationException: None
Nested Exception:
java.lang.RuntimeException: Failed to deploy process <ProcessName.jpd>. Internal error.
at com.bea.wli.management.WLIAppListener.checkProject(WLIAppListener.java:194)
at com.bea.wli.management.WLIAppListener.initializingApplication(WLIAppListener.java:130)
at weblogic.j2ee.ListenerInvocationAction.run(ListenerInvocationAction.java:42)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.j2ee.J2EEApplicationContainer.notifySecureListener(J2EEApplicationContainer.java:4721)
at weblogic.j2ee.J2EEApplicationContainer.notify(J2EEApplicationContainer.java:4706)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:986)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
I m working on Weblogic 8.1.2 Integration domain. When I delete all the Wli_process_* tables, I m able to deploy the ear and it runs fine for a few days, after which it again starts giving the Internal Error and I m forced to delete the tables and restart the server.
Does anyone have any idea about this? the cause?
Is there some alternative solution of getting rid of it?
Thanks in Advance,
Looking forward to quick replies
ak

I think the deployment fails because you might have inflight processes
running. And it succeds after you delete the in-process data.
It will be worthwhile to investigate "Internal Error " rather then the
re-deployment workaround.
~ Veerendra
"AK Tiwari" <[email protected]> wrote in message
news:18418117.1103279949606.JavaMail.root@jserv5...
Hello,
When deploying a EAR, I get the following exception:
[Deployer:149033]preparing application esb on <xxx-admin>
[Deployer:149033]failed application esb on <xxx-admin>
[Deployer:149034]An exception occurred for task [Deployer:149026]Deploy
application esb on <xxx-admin>.:
Exception:weblogic.management.ApplicationException: None
Nested Exception:
java.lang.RuntimeException: Failed to deploy process <ProcessName.jpd>.
Internal error.
at
com.bea.wli.management.WLIAppListener.checkProject(WLIAppListener.java:194)
at
com.bea.wli.management.WLIAppListener.initializingApplication(WLIAppListener.java:130)
at
weblogic.j2ee.ListenerInvocationAction.run(ListenerInvocationAction.java:42)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at
weblogic.j2ee.J2EEApplicationContainer.notifySecureListener(J2EEApplicationContainer.java:4721)
at
weblogic.j2ee.J2EEApplicationContainer.notify(J2EEApplicationContainer.java:4706)
at
weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:986)
at
weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
at
weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
at
weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
at
weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
at
weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
at
weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
at
weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
I m working on Weblogic 8.1.2 Integration domain. When I delete all the
Wli_process_* tables, I m able to deploy the ear and it runs fine for a
few days, after which it again starts giving the Internal Error and I m
forced to delete the tables and restart the server.
Does anyone have any idea about this? the cause?
Is there some alternative solution of getting rid of it?
Thanks in Advance,
Looking forward to quick replies
ak

Fbe internal error when compiling OpenSSL 1.0.2 64 bit

./Configure solaris64-sparcv9-cc no-shared -m64 -xcode=pic32 -xldscope=hidden
./make
cc -I.. -I../.. -I../modes -I../asn1 -I../evp -I../../include -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -m64 -xcode=pic32 -xldscope=hidden -xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DAES_ASM -DGHASH_ASM -c -c -o md5-sparcv9.o md5-sparcv9.S
cc: Warning: -xarch=v9 is deprecated, use -m64 to create 64-bit programs
/opt/solarisstudio12.4/bin/fbe: "/tmp/cpp.1426232079.27660.01.s": , approx line 1041: internal error: pic_relocs(): hh reltype?
Reading around, it seems to be caused by setting -xcode=pic32 but I need to set that because I am building a static library that will be linked into a shared library and that requires relocation.
Changing the makefile so that the -xcode=pic32 flag is not passed when compiling .s files solves the problem but I am unsure if I will have an invalid build.
Previous OpenSSL versions have compiled cleanly with this flag set.
Does the message 'internal error' indicate that it is a bug in the compiler? If so is there a fix?
Can anyone advise please?

Internal errors, such as the one you encountered, are generally considered compiler bugs. They indicate that the compiler reached an unexpected state and therefore bailed out. I opened bug 20703141: internal error: pic_relocs(): hh reltype? to investigate. I see the same error message emitted by the current Studio development release; I will update this thread if I find a work-around.
Thanks,
Mark

Error while creating SC: Internal Error - termination type TH_RES_FREE

Hi I encountered this error while creating a SC. All attributes for this user are maintained and the "check user" transaction does not give any error.
Amol Mate
Error when processing your request
What has happened?
The URL http://punhjwsapsrm:8000/sap/bc/gui/sap/its/bbpsc02/! was not called due to an error.
Note
The following error text was processed in the system SSS : Internal Error
The error occurred on the application server PUNHJWSAPSRM_SSS_00 and in the work process 1 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Function: B40B_READ_TABLE of program SAPLBBP_BD_DRIVER_40B
Function: META_READ_TABLE of program SAPLBBP_BD_META_BAPIS
Form: LOCATIONS_READ of program SAPLBBP_ATTR_F4
Function: BBP_ATTR_F4_SLOC_PPOMA of program SAPLBBP_ATTR_F4
Form: STG_LOC_GET_FOR_LOCATION of program SAPLBBP_SC_APP
Form: STG_LOC_GET of program SAPLBBP_SC_APP
Form: LOCATION_STG_LOC_GET of program SAPLBBP_SC_APP
Form: USER_ATTRIBUTES_GET of program SAPLBBP_SC_APP
Form: SC_INIT of program SAPLBBP_SC_APP
Function: BBP_SC_APP_EVENT_DISPATCHER of program SAPLBBP_SC_APP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SSS in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server PUNHJWSAPSRM_SSS_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server PUNHJWSAPSRM_SSS_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http-c:100-u:PTEST -l:E-s:SSS-i:PUNHJWSAPSRM_SSS_00 -w:1-d:20051121-t:171904-v: TH_RES_FREE-e:Internal Error
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hi Amol,
First of all the sicf transaction is to be used only if you use the internal ITS.
Now you have to put an external breakpoint in the source code of the ABAP Program or FM you want to debug , one of these in your case :
Function: B40B_READ_TABLE of program SAPLBBP_BD_DRIVER_40B
Function: META_READ_TABLE of program SAPLBBP_BD_META_BAPIS
Form: LOCATIONS_READ of program SAPLBBP_ATTR_F4
Function: BBP_ATTR_F4_SLOC_PPOMA of program SAPLBBP_ATTR_F4
Form: STG_LOC_GET_FOR_LOCATION of program SAPLBBP_SC_APP
Form: STG_LOC_GET of program SAPLBBP_SC_APP
Form: LOCATION_STG_LOC_GET of program SAPLBBP_SC_APP
Form: USER_ATTRIBUTES_GET of program SAPLBBP_SC_APP
Then launch the transaction in IE, once the program reaches a breakpoint, you'll get the ABAP debuger in IE.
Regards.
PS: if it doesn't work, put the parameter ~generatedynpro in BBPGLOBAL service to have it applied to all BBP transactions
Vadim

Internal error occurs in background job scheduling

Hi Experts,
We are facing an error message "Internal error occurs in background job scheduling" while trying to execute a custom report(Z report) in background in SA38.
Please find the following observation on our side on this message.
1) This message is not coming for only one report not for others.
2) SU53 screen shot shows that SE38 check is failed, but the weird thing is not happening for other report.
3) Persons having SE38 auhtorization are able to run this report.
Please advise.
Thanks in advance,
Viven

What is the message ID and number? Have you tried OSS search and debugging?
What does this program do, in a nutshell?

Investigat​e Internal Error

Similar Messages

Maybe you are looking for

Investigate Internal Error