INVISBLE TEXT IN THE SELECTION SCREEN

HI ALL,
I HAVE LOOP ON SCREEN AT THE SELECTION SCREEN,
AND IT SUPPOSE TO INVISIBLE SOME FIELDS.
THE PROBLEM IS THAT IT IS NOT INVISIBLE THE TEXT.
THE CODE IS ABOVE:
      case screen-name.
        when 'SO_SAKNR-LOW' OR 'SO_SAKNR-HIGH'.
          screen-invisible = 0.
          screen-active    = 1.
        when 'SO_KUNNR-LOW' or 'SO_KUNNR-HIGH'.
          screen-invisible = 1.
          screen-active    = 0.
       when 'SO_LIFNR-LOW' or 'SO_LIFNR-HIGH'.
          screen-invisible = 1.
          screen-active    = 0.
      endcase.
HOW AM I SUPPOSE TO INVISIBLE THE TEXT TOO?
THANKS,
DANA.

Dana,
try following code
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) text-003 FOR FIELD p_monat MODIF ID fi.
SELECTION-SCREEN POSITION 33.
PARAMETERS p_gjahr LIKE bkpf-gjahr MODIF ID fi.
PARAMETERS p_monat LIKE bkpf-monat MODIF ID fi.
SELECTION-SCREEN COMMENT 52(04) text-005 FOR FIELD p_monat MODIF ID fi.
SELECTION-SCREEN POSITION 58.
PARAMETERS p_bgjahr LIKE bkpf-gjahr MODIF ID fi.
PARAMETERS p_bmonat LIKE bkpf-monat MODIF ID fi.
SELECTION-SCREEN END OF LINE.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
      IF screen-group1 = 'FI'.
        screen-input = '0'.
        screen-invisible = '1'.
        MODIFY SCREEN.
      ENDIF.
ENDLOOP.
-Anu.
Message was edited by: Anupama Reddy

Similar Messages

How to write text on the selection screen of a report

Hi all,
I need to write some user defined text on the selection screen of an ALV GRID Report.
Please suggest me how can i do this
Thanks
Ajay.

SELECTION-SCREEN BEGIN OF LINE .
SELECTION-SCREEN COMMENT 12(31) text-024.<-----Goto text elements and add text.
PARAMETERS:P_FILEN LIKE RLGRAP-FILENAME .
SELECTION-SCREEN END OF LINE

How to display the dynamic text in the selection screen

Hi All,
I want to display the dynamic text in the selection screen .... ( I searched in forums , didnt get the any answer fot this sort of qustion ).....
EX: If i have the date of today 31st it has to show message like " today date is 31 like some thing " when i execute the report .
Could any one face this sort of requirment, Please let me know.
Thanks in advance.
Reagrds,
Bharani

Where would you like this dynamic text being displayed? As an "message" or in some parameter field?
If first
parameters date type d.
data: text type string.
at selection-screen.
   concatenate 'Today is' date into text.
   message text type 'I'.
If second
parameters pa_text type c length 50.
at selection-screen on date.
if date is not initial.
    concatenate 'Today is' date into pa_text.
enidf.
at selection-screen output.
   "show it as read only
   loop at screen.
    if screen-name = 'PA_TEXT'.
           screen-input = abap_false.
          modify screen.
    endif.
   endloop.
Regards
Marcin

Adding Standard Text to the Selection Screen obtained using PARAMETERS

Hi all,
I have a report program which has the selection screen declared by the key word PARAMETERS.
Now I need to make the changes to this program such that a Text Editor appears on the Selection Screen and has a Standard text that should be displayed.
How can I do it?
I saw the screen number of the Selection Screen and went to screen painter and tried to add the Text Editot..but it did not let me dou2026.Why?
How should I add a standard text to a selection screen? The standard text should not be on top , but some where on the screen.
Regards,
Jessica Sam

Hi Sam,
I dont want to create a new screen for this. On the existing screen whihc was built using PARAMETERS key word..i should insert a blokc of text whihc is mpre than 5-6 lines..how should i do it.
I navigated to Text Elements---->Selection Texts
it is now asking for Name and Text and i see in Name column the name of the parametsr that they used for Check box, radio button etc and in Text i see the text that is appearing on the screen
Now i am not sure what is should do next
My req is..i should display a block of standard text that doesnt change and whihc is of 4-6 lines?
how should i do it?
please also help me with what data declartions that i should do in parametrs key word in program?
Regards,
Jessica Sam

Displaying Variables values with Text also in the selection screen of repor

hai
I have one InfoObject ZPLANT .When i try to excute the report then im getting only the Values of ZPLANT(not Text of those values) .Like below
ZPLANT :-
101 -
(im getting like this)
101 London Plant ( i want like this ,when i try to excute the report).
Please tell me how to do .
rizwan

Yes kamaljeet ,
When we press F4 , then we will gwt some values .
I want those values with description also ..
Pls tell me how can i get those F4 values with text in the selection screen of report .
i ll assing the points
rizwan

Change of variable text in BEx selection screen

Hi all,
in our BW system the key users are allowed to create queries and also create variables. In some cases, especially for often used info objects like 0DATE the number of variables is increasing very quickly. The reason for this is, that 0DATE is used for a big variety of meanings e.g. delivery date, order date, invoice date etc.
So the users always create new variables only to have a meaningful description in the BEx selection screen, because they do not want only "date" to be displayed here. As result we have many different varianbles with exactly the same technical settings with only different names.
So my question is: Is it possible to change the diplayed text in the selection screen for each query without having to create a new variable?
Thanek you and best regards

Hi Stephan,
Changing the diplayed text in the selection screen for each query is not possible.You have to create a new variable for each query.
Rgds,
Murali

I need to get an icon on the selection screen as well as selection text .

HI ,
 Can anybody please tell me how to get an icon in the selection-screen along with the selection texts written for select-options or parameters.
For Example:
 Select-Options: S_WERKS For T001w-werks,
 S_AUART For TVAKT-AUART,
 S_ERDAT For LIKP-ERDAT.
IN THE SELECTION TEXTS:
 FOR S_WERKS i write (WareHouse)
 FOR S_AUART i write (OrderType)
 FOR S_ERDAT i write (PlantDate)
 I need to get the icons for this fields as well as selection texts written for these fields.
I will reward full points to the solution.
Mohan.

Hi mohan,
Run the below code
Report zex33.
tables : t001w,
 tvakt,
 likp.
type-pools: icon.
selection-screen begin of line.
selection-screen comment 1(20) text_001.
select-options: S_WERKS For T001w-werks.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_002.
select-options :S_AUART For TVAKT-AUART.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_003.
select-options : S_ERDAT For LIKP-ERDAT.
selection-screen end of line.
initialization.
write ICON_WAREHOUSE as icon to text_001.
concatenate text_001 text-001 into text_001 separated by space.
write ICON_ORDER as icon to text_002.
concatenate text_002 text-002 into text_002 separated by space.
write ICON_PLANT as icon to text_003.
concatenate text_003 text-003 into text_003 separated by space.
*In text-001 -> Warehouse
*In text-002 -> Order Type
*In text-003 -> Plant Date

How to display the selection screen with icons as well as with text element

How to display the selection screen with icons as well as with texts (written in text elements) for PlantDate, OrderType,WareHouse..

Report zex33.
type-pools: icon.
selection-screen begin of line.
selection-screen comment 1(20) text_001.
parameters: p_werks type marc-werks.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_002.
parameters: p_whouse(10).
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_003.
parameters: p_auart like vbak-auart.
selection-screen end of line.
initialization.
write ICON_PLANT as icon to text_001.
concatenate text_001 text-001 into text_001 separated by space.
write ICON_WAREHOUSE as icon to text_002.
concatenate text_002 text-002 into text_002 separated by space.
write ICON_ORDER as icon to text_003.
concatenate text_003 text-003 into text_003 separated by space.

How to color the text element in selection screen

hi,
i am going to pass some text element in selection screen output and my requiremnt is text element should be given some colour.
plz guide me.
regards
muthuraman.d

Hi...
Dont Declare your field as OBLIGATORY.
Instead perform the validation in AT SELECTION-SCREEN event. But validation should be only when Particular Radiobutton is selected.
And Generate only Error Message (Type E).
Try this code:
AT SELECTION-SCREEN on <yOUR mandatory field>.
 IF PA_UPD = 'X'.
 IF <YOUR MANDATORY FIELD> IS INITIAL.
 Message 'Entry is must in this field' type 'E'.
 ENDIF.
 ENDIF.
AT SELECTION-SCREEN OUTPUT.
IF pa_udp = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-active = 1.
ELSEIF screen-group1 = 'DEF'.
screen-input = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF pa_rep = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-input = 0.
ELSEIF screen-group1 = 'DEF'.
screen-active = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
Reward if Helpful

How to change the text in default selection screen

Hi,
I have created the default selection screen(using PNP Logical database) ,In that I wants to display 'Data Selection Period' instead of 'Period'.
Please send me the related code.
Thanks in advace
mohan

HR Logical Database is PNP
Main Functions of the logical database PNP:
Standard Selection screen
Data Retrieval
Authorization check
To use logical database PNP in your program, specify in your program attributes.
Standard Selection Screen
Date selection
Date selection delimits the time period for which data is evaluated. GET PERNR retrieves all records of the relevant infotypes from the database. When you enter a date selection period, the PROVIDE loop retrieves the infotype records whose validity period overlaps with at least one day of this period.
Person selection
Person selection is the 'true' selection of choosing a group of employees for whom the report is to run.
Sorting Data·
The standard sort sequence lists personnel numbers in ascending order.
· SORT function allows you to sort the report data otherwise. All the sorting fields are from infotype 0001.
Report Class
· You can suppress input fields which are not used on the selection screen by assigning a report class to your program.
· If SAP standard delivered report classes do not satisfy your requirements, you can create your own report class through the IMG.
regards
vinod

Is it possible to display a tag at the selection screen in the output.

Hi all,
   When you go to se38 and in the program editor screen, at the bottom right end of the screen you find a value called NUM and when you place your cursor on that it displays a tag that says "Num Lock Mode. Double click to toggle."
   My query is, when i execute a report it takes me to the output screen that has a parameter, here i want to display a tag, say "enter the record as it is in the database". Is it possible to have such an option.
   If you'll are wondering why I'm looking for such an option it is just to make a report that can be understood by many.
P.S: Not only on the NUM field the tag is available. Even on tools like activate display and so on.
Regards,
Narayanan Chandran.

If it's a report program, use a comment in the selcetion screen for information of the user as shown below.
* Information
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-003.
SELECTION-SCREEN COMMENT /1(60) text-004. "Text containing the information message
SELECTION-SCREEN END OF BLOCK b1.
If you are using a module pool, you can create a tooltip for the element as suggested.

Problem with checkbox in the selection screen

Hi guys,
I have a problem with the check box in the selection screen.When i select a check box then a field in the selection screen should be enabled for entering a value.Again if i unselect the checkbox then the field should be disabled for entering a value.I have written the code in at selection-screen output.
The problem is when i select the check box ,the field is not enabled.But when i press enter after selecting the checkbox then the field is enabled for input.It is the same when i unselect the checkbox,after i press enter only the field is getting disabled.What could be the problem.Any suggestions please?
Thanks.

Hi d p
             Please try this code . I think this code have some way that you would like.
REPORT zdownload_to_application_server.
TABLES : caufvd, jest.
I N C L U D E P R O G R A M                                        *
*INCLUDE znrpstnd.
Selection Screen                                                    *
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t03.
PARAMETERS: p_outb RADIOBUTTON GROUP g1 USER-COMMAND outb DEFAULT 'X' ,
            p_inb RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
PARAMETERS : p_werks LIKE caufvd-werks MODIF ID a.        " Plant   "OBLIGATORY
SELECT-OPTIONS : s_auart FOR caufvd-auart MODIF ID a,       " Order Type
                   s_aufnr FOR caufvd-aufnr MODIF ID a.       " Order number
PARAMETERS: p_path TYPE string DEFAULT 'C:\SchedulerInterface-OutboundTextFile\' MODIF ID a,
            p_actual AS CHECKBOX MODIF ID a.                  " Transfer Actual
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETERS : p_werks2 LIKE caufvd-werks MODIF ID b,   " Plant   "OBLIGATORY
             p_path2 TYPE string DEFAULT 'C:\SchedulerInterface-InboundTextFile\' MODIF ID b,
             p_path3 TYPE string DEFAULT 'C:\SchedulerInterface-InboundTextFile\' MODIF ID b,
             p_sessio TYPE apqi-groupid MODIF ID b.   " BDC Session
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
IF p_outb EQ 'X'.   " Outbound --> Hide inbound
    LOOP AT SCREEN.
      "IF screen-name = '%BT02011_BLOCK_1000'.
      IF screen-group2 = 'BLK'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'A'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'B'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      "IF screen-name = '%BT01004_BLOCK_1000'.
      IF screen-group3 = 'BLK'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'A'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'B'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path2.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_path         = 'C:\SchedulerInterface-InboundTextFile\'
      mask             = ',Text Files,.txt,All files,.*.'
    IMPORTING
      filename         = p_path2
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path3.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_path         = 'C:\SchedulerInterface-InboundTextFile\'
      mask             = ',Text Files,.txt,All files,.*.'
    IMPORTING
      filename         = p_path3
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
TOP-OF-PAGE.
START-OF-SELECTION.
Regards
Wiboon

F4 Help for the selection screen field

Hi Gurus,
I have to display F4 help for a selection screen field. i am using following code:
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
         EXPORTING
              retfield        = 'CODE'
              dynpprog        = lw_repid
              dynpnr          = sy-dynnr
              VALUE_ORG       = 'S'
         TABLES
              value_tab       = gi_text
             field_tab       = li_fields_tab
              return_tab      = pi_return_tab
         EXCEPTIONS
              parameter_error = 1
              no_values_found = 2
              OTHERS          = 3.
My internal table gi_emp has two fields CODE & TEXT. When i select 1 particular value, it returns the CODE value in the pi_return_tab table.
But my requirement is i have to capture the corresponding TEXT value for the Returned CODE. Ex: following is the F4 help being displayed: -
001    test
001    test1
but is i select code 001(First Value), i also need to capture it's corresponding Text value. In return table pi_return_tab i have only Code value.
Please help me out.
Note: Based on return code i can't search into the internal table gi_code, because as shown in the example, code has multiple text.

Sachin,
I think this is what you need. The following code will return the key and the text (OR any other columns), if both columns are in the selection screen the selected values (both columns) will also be passed to the corresponding parameters. If you only need the text to be in the return table and not passed to the selection screen then set the parameter for text with NO-DISPLAY option.
REPORT zktest01 .
DATA :
BEGIN OF value_tab OCCURS 0,
    field LIKE e070-trkorr,
    text   LIKE e07t-as4text,
END OF value_tab.
DATA: t_fldtab LIKE dfies OCCURS 0 WITH HEADER LINE,
      t_rettab LIKE ddshretval OCCURS 0 WITH HEADER LINE,
      t_dynmap LIKE dselc OCCURS 0 WITH HEADER LINE.
PARAMETERS : p_field LIKE value_tab-field,
             p_text   LIKE value_tab-text. "NO-DISPLAY.
INITIALIZATION.
t_fldtab-tabname   = 'VALUE_TAB'.
t_fldtab-fieldname = 'FIELD'.
t_fldtab-langu     = 'E'.
t_fldtab-position = 1.
t_fldtab-offset    = 0.
t_fldtab-fieldtext = 'Key'.
t_fldtab-reptext   = 'Key'.
t_fldtab-leng      = 20.
t_fldtab-intlen    = 20.
t_fldtab-outputlen = 20.
t_fldtab-datatype = 'CHAR'.
t_fldtab-inttype   = 'C'.
t_fldtab-headlen   = 20.
t_fldtab-keyflag   = 'X'.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
t_fldtab-tabname   = 'VALUE_TAB'.
t_fldtab-fieldname = 'TEXT'.
t_fldtab-position = 2.
t_fldtab-offset    = 20.
t_fldtab-fieldtext = 'Text'.
t_fldtab-reptext   = 'Text'.
t_fldtab-leng      = 60.
t_fldtab-intlen    = 60.
t_fldtab-outputlen = 60.
t_fldtab-headlen   = 60.
t_fldtab-keyflag   = ' '.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
value_tab-field = '101'.
value_tab-text = 'dddd'.
APPEND value_tab.
value_tab-field = '202'.
value_tab-text = 'aaaa'.
APPEND value_tab.
t_dynmap-fldname = 'FIELD'.
t_dynmap-dyfldname = 'P_FIELD'.
APPEND t_dynmap.
t_dynmap-fldname = 'TEXT'.
t_dynmap-dyfldname = 'P_TEXT'.
APPEND t_dynmap.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_field.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'FIELD'
            dynpprog        = 'ZKTEST01'
            dynpnr          = '1000'
            dynprofield     = 'P_FIELD'
            value_org       = 'S'
       TABLES
            field_tab       = t_fldtab
            value_tab       = value_tab
            return_tab      = t_rettab
            dynpfld_mapping = t_dynmap
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc EQ 0.
ENDIF.
START-OF-SELECTION.
Jeffrey Satriadi

How to use MM/YYYY Format in the selection Screen?

There is this program RMCB0300 where the date format in the selection screen has MM/YYYY Format.
I am working on a report which requires it "Period" Field in the selection screen to be in the same format.
However, i am trying to give the select option as " SL_SPMON FOR S031-SPMON MODIF ID PER." and declaring S031 table in the declaration part.
But still, its not been able to provide me F4 help in the inpur screen.
Can someone please provide me some guidance in this regard?

Hi,
the following works for me..
*& Report ZPMONAT *
report zpmonat .
tables: s031.
selection-screen begin of block abc.
select-options: sl_spmon for s031-spmon.
selection-screen end of block abc.
at selection-screen on value-request for sl_spmon-low.
perform monat_f4.
at selection-screen on value-request for sl_spmon-high.
perform monat_f4.
start-of-selection.
end-of-selection.
*& Form monat_f4
* text
* --> p1 text
* <-- p2 text
form monat_f4 .
data: begin of mf_dynpfields occurs 1.
 include structure dynpread.
data: end of mf_dynpfields.
data: mf_returncode like sy-subrc,
 mf_monat like isellist-month,
 mf_hlp_repid like sy-repid.
field-symbols: <mf_feld>.
* Wert von Dynpro lesen
get cursor field mf_dynpfields-fieldname.
append mf_dynpfields.
mf_hlp_repid = sy-repid.
do 2 times.
 call function 'DYNP_VALUES_READ'
 exporting
 dyname = mf_hlp_repid
 dynumb = sy-dynnr
 tables
 dynpfields = mf_dynpfields
 exceptions
 invalid_abapworkarea = 01
 invalid_dynprofield = 02
 invalid_dynproname = 03
 invalid_dynpronummer = 04
 invalid_request = 05
 no_fielddescription = 06
 undefind_error = 07.
 if sy-subrc = 3.
* Aktuelles Dynpro ist Wertemengenbild
 mf_hlp_repid = 'SAPLALDB'.
 else.
 read table mf_dynpfields index 1.
* Unterstriche durch Blanks ersetzen
 translate mf_dynpfields-fieldvalue using '_ '.
 exit.
 endif.
enddo.
if sy-subrc = 0.
* Konvertierung ins interne Format
 call function 'CONVERSION_EXIT_PERI_INPUT'
 exporting
 input = mf_dynpfields-fieldvalue
 importing
 output = mf_monat
 exceptions
 error_message = 1.
 if mf_monat is initial.
* Monat ist initial => Vorschlagswert aus akt. Datum ableiten
 mf_monat = sy-datlo(6).
 endif.
 call function 'POPUP_TO_SELECT_MONTH'
 exporting
 actual_month = mf_monat
 importing
 selected_month = mf_monat
 return_code = mf_returncode
 exceptions
 factory_calendar_not_found = 01
 holiday_calendar_not_found = 02
 month_not_found = 03.
 if sy-subrc = 0 and mf_returncode = 0.
* ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
* <MF_FELD> = MF_MONAT.
 call function 'CONVERSION_EXIT_PERI_OUTPUT'
 exporting
 input = mf_monat
 importing
 output = mf_dynpfields-fieldvalue.
 collect mf_dynpfields.
 call function 'DYNP_VALUES_UPDATE'
 exporting
 dyname = mf_hlp_repid
 dynumb = sy-dynnr
 tables
 dynpfields = mf_dynpfields
 exceptions
 invalid_abapworkarea = 01
 invalid_dynprofield = 02
 invalid_dynproname = 03
 invalid_dynpronummer = 04
 invalid_request = 05
 no_fielddescription = 06
 undefind_error = 07. "<<== note 148804
 endif.
endif.
endform. " monat_f4
Regards,
Suresh Datti

How to display data from internal table in the SELECTION-SCREEN

Hello Experts,
My requirement is to display the data's from an internal table in the selection screen. I tried using selection-screen comment. But it is working only for a single record. Can anyone please tell me how to do this?

Hi Ritika,
we cant use write statement inside selection-screen.
see my coding.
SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-456.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1
 NO INTERVALS.
 SELECT-OPTIONS SEL1 FOR SY-DATUM.
 PARAMETERS PAR1(10).
** I WANT ALL RECORDS FROM AN INTERNAL TABLE HERE ONLY
 SELECTION-SCREEN END OF BLOCK BL1.
SELECTION-SCREEN PUSHBUTTON 2(10) but1 USER-COMMAND cli1.
SELECTION-SCREEN PUSHBUTTON 20(10) but2 USER-COMMAND cli2.
SELECTION-SCREEN END OF SCREEN 123.

INVISBLE TEXT IN THE SELECTION SCREEN

Similar Messages

Maybe you are looking for