Invoice for BOM_Normal material(TAN item category) error

Hi Sap gurus,
We are facing one production issue.they are creating a SO/Delivery/billing with below line items:
1.Normal material
2.BOM
3 BOM components1
4.BOM components2
5.Normal material
6.Normal material
but while creating billing, the BOM components would be populate automatically by using user exit.
Now issue is while creating billing, its not showing last normal material, i.e. its looks like below
1.Normal material
2.BOM
3 BOM components1
4.BOM components2
5.Normal material
6. MISSING IN BILLING LEVEL
But in document flow the 6th material entry is available with out qty, amount & UOM.
please suggest me on above point, where I have to check?? (We have checked in copy controls but we are not finding any result here)
But This is a very peculiar case where the business scenario has not be identified and the system behavior is random. We are still
analyzing the root cause of the issue, why this happened only for certain invoices and working fine for other invoices with same 6th material.
if now we are creating billing with above (6th normal material) it's working fine.
But in PRD now we have to correct all wrongly populated billing documents and we have to found the issue why its happening.
Please guide me on above.
BR,
Shabs

Sir,
My SD consultant stating that there is no problem with copy controls/split func but as a abaper I have checked in all circumstances..
So its happening only for 5 orders & if we tried to create complete cycle in production SO-->Delry-->Billing it's created successfully.
But now how we can correct the old 5 invoices..
And one strange thing is in VBRP table the last material ENTRY is not showing but in flow VBFA the material entry is showing without qty, item no and UOM.
Request you to suggest me how to resolve the issue.
Thank you in advance.
Thanks,
Shabs

Similar Messages

  • Material and item category error in inbound delivery through IDOC

    Hi,
    When processing inbound delivery through idoc from we19, iam getting 2 errors:
    1. Enter a material or an item category,
    2. No item category exists (Table T184L EL ZCBN V )
    can some please let me know how to solve this error.
    Thanks,
    Kashif

    Hi Kashif,
    You have to enter Material number in the sub-segment of E1EDP01 segment in WE19 transaction.
    Rgds,
    Kumar

  • Intercompany transfer for material with item category Erla

    Hi,
    I have a typical requirement.
    I am creating a value pack(finish good) with item category mainatined as ERLA(while mat master creation) which consistes of 2 items.
    I have maintained a BOM for this value pack(finished material).
    Since ERLA is maintained,I can explode BOM in Sales Order creation(correct me if I am wrong)
    This is okay for sales cycle.
    I have following requirement
    I want to do a Intecompany stock transfer of this value pack(i.e. finish good) with doc type NB.
    The problem in this is that it gives error while creating outbound delivery stating some entries missing in table (do not exactly remember)for NLCC/DOGN.. something like that.
    If anyone has done this type of scenario earlier then request you to send me the configuration settings required to be done in terms of Item category/Delievry combination etc etc .
    This is quite urgent for me.
    If there is any different way to map this Intecompany Stock Transfer of Material (with Item category maintained as ERLA) then please let me know.
    Thanks in advance.
    Regards,
    manOO

    Hi
    You maintain "Item category group" NORM in the Sales org 2 tab, this is used for sales organisation and distribution channel for Outboumd delivery.
    The "General Item category group" does not refer to the Sales organisation and distribution channel, this is used for Inbound delivery.
    In can create the material master in MM01, specify the "Material type" and "Industry sector" .
    For, Item category determination in VOV4, you need to assign like this as below,
    Sales doc type + Item category group + usage + Item category of higher level item = Item category.
    Item category determination for free item,
    OR + NORM + FREE + TAN = TANN.
    As beacuse you are giving the normal material as free, therefore you must give the indication to the system to use it as free material by specifying the usage as "FREE".

  • Enter a Material or item catg error in Inbound delivery through idoc

    Hi,
    When Iam processing inbound delivery through Idocs, iam getting 2 kind of errors
    1. Enter a material or item category
    2. No item category exists (Table T184L EL 0002 V )
    Iam thinking may be this is about not having an entry in T184L table. we have an item as ZTAS. can somebody let me know how to solve these errors.
    Thanks,
    Kashif

    Hi Kashif,
    You have to enter Material number in the sub-segment of E1EDP01 segment in WE19 transaction.
    Rgds,
    Kumar

  • Two customs Invoices for a single PO item

    Hi,
      For a Purchase Order line item we have already posted a custom invoice and goods receipt done for partial qty.
    The Customs invoice was also done for Partial qty.
    Now the second consignment is arrived and we want to post the custome invoice for the remaining qty.
    While trying to post the same,system is giving qty error....
    Quantity invoiced greater than goods receipt quantity
    Message no. M8081
    As this is a Import PO the "GR based IV" is not ticked...
    Cant we post two custom invoices for a single PO item.....any suggestions....
    Regards,
    Rajesh

    Hi,
       I am thinking of converting the message M8081 - Quantity invoiced greater than goods receipt quantity to warning message.
    This will resolve my issue which I am facing for multiple customs invoice for a single PO line Item.
    I have two similer message configured in my system
    M8081 - Quantity invoiced greater than goods receipt quantity
    M8504 - Quantity invoiced greater than goods receipt quantity
    Both are error messages.
    My understanding is that the first one is used where the Indicator for "GR based IV" is unticked in PO and the secod one is for the GR based IV is ticked.
    Your opinion on this..so that I can understan the implication
    Rajesh

  • SAP Best Practice for Document Type./Item category/Acc assignment cat.

    What is the Best Practice for the document Type & Item category
    I want to use NB -  Item category  - B & K ( Blanket PO) , D ( Service)  and T( Text) .
    Is sap recommends to use FO Only for the Blanket Purchase Order.
    We want to use service contract (with / without service entry sheet) for all our services.
    We want to buy asset for our office equipments .
    Which is the best one to use NB or FO ?
    Please give me any OSS notes or reference for this
    Thanks
    Nick

    Thank you very much for your response. 
    I hope I can provide some clarity on how the accounting needs to be handle per FERC  Regulations.  The G/L balance on the utility that is selling the assets will be in the following accounts (standard accounts across all FERC Regulated Utilities):
    101 - Acquisition Value for the assets
    108 - Accumulated Depreciation Value for the assets
    For an example, there is Debit $60,000,000 in FERC Account 101 and a credit $30,000,000 in FERC Account 108.  When the purchase occurs, the net book value for the asset will be on our G/L in FERC Account 102.  Once we have FERC Approval to acquire the plant assets, we will need to enter the Acquisition Value and associated Accumulated Depreciation onto our G/L to FERC Account 101 and FERC Account 108 respectively with an offset to FERC Account 102.
    The method that I came up with is to purchase the NBV of the assets to a clearing account.  I then set up account assignments that will track the Acquisition Value and respective Accumulated Depreciation for each asset that is being purchased.  I load the respective asset values using t-code AS91 and then make an entry to the 2 respective accounts with the offset against the clearing account using t-code OASV.  Once my company receives FERC approval, I will transfer the asset to new assets that has the account assignments for FERC Account 101 and FERC Account 108 using t-code ABUMN or FB01.

  • Release strategy for PR with multiple item category

    Hello,
    I'm trying to create a global release strategy for a PR based on the item category.   I have defined a caracteristic with different item categories (A and K).
    If I create a PR with item category A, the correct strategy is triggered as well as for an PR with item category K.  The problem is when I create a PR with 2 positions, one A and one K, there is no strategy triggered.
    How can I change my settings that there is also a strategy triggered in this case ?
    Thank you in advance for you help.
    Kind regards

    Hi,
    Solution is very small. Please maintain a blank entry too in the characteristics value. It will start working.
    Sanjeev

  • ITem category  error while creating sales order through

    Hi,
    I am trying to create a sales order through Bapi  and in between im getting the below error.
    ' Item category TAM is not defined for non material items'.
    Can anybody pls provide the solution for this.
    Thanks

    speak to your SD functional person.  The Error is pretty self explanatory; SAP is telling you that the item category for that order item is not permitted by your SD configuration.

  • Material and item category relationship

    For a given material, how can I get item category and higher level item category.
    I know mara stores item category group and t184 stores item category group and item category
    Thanks.

    Think you are going wrong way.
    Item Category and High Level Item Category are not assigned to Material, but they are assigned to Sales Document Type and Item Category Group. As you mentioned, you can get the details from table T184.
    Table T184 gives the options on how the system has to react in various scenarios.
    Combination of Sales Document Type in Sales Order, Item Category Group which is from Material Master and... result in the Item Category that is populated for the Item.
    Regards
    Eswar

  • VPRS Condition is missing in invoice for bacth determine line item

    Hi Gurus,
    I have an Concern, My user has created Sales order with three line items.
    He did delivery and Invoice individually for each line item.
    For 2 line items he entered batch manually and did invoice there we didn't find any issue.
    For third line item he did auto batch determination there for that item VPRS condition is missing in invoice.
    I have checked the note ( 70038 ) and I have applied the note also, But still I am facing same problem.
    Please provide me solution if any modification need to be done,
    Thanks and Regards
    Subbu

    Hi Subbu
    As VPRS condition type is coming for the first 2 line items and not for 3rd line item , so kindly check the Material Master Record->Accounting tab.What is the difference between the 3rd material and another 1st and 2nd materials.Also check in the Analysis what it is showing for the third line item billing document
    Regards
    Srinath

  • CRM Service Ticket - Item Category error - IC Webclient

    Hi
    Once I confirm the customer account, I click on "Service Ticket".
    I'm getting the following error "No Item Category could be created". I've taken a look at a few of the Item Category Groups & Usages and none of them appear to be exactly related to a Service Ticket. I  believe this maybe the issue.
    Would anyone have some guidance on this.
    Points will be awarded for the right info.
    Many Thanks
    Arden

    Thanks Johnny
    Do you know if this resolves the issue with the creation of the Service Ticket or does it just make it easier to link the Header & Item Level attributes.
    Points awarded
    Regards
    Arden

  • Issue with purchase requisition for third party order (Item category S)

    Hello Experts,
                         When I am trying to create purchase requisition with document type NB , item category S (third party) , I am nokt able to assign source of supply as contracts.
    That means when I click on the assign source of supply button , I am seeing only info records although I have contracts cretated for that vendor/material combination.
    How can I assign contract as a source of supply instead of infor records ?
    Please help.

    You have to assign the contract in source list and make it Fix
    use ME01 transaciton to assign the contract in the source list
    and make sure that contract is release if you have release strategy activated

  • Link Material Type Item Category

    Hi,
    How can i make the link between the material type and the item category when the material has NO BOM ? Otherwise each time a PM order si created the item category has to be filled (stock or no stock). I know it is there i just can't find it.
    Thanks,
    Olivier

    Hello,
    Can you brief me on how it works?
    When i checked the setting of link item category with the material type then it shows me that the item category is to be defined based on the material type and maintenance plant. But what is the relation in term of the order type i.e. whenever i create any order with a specifica order type, the default item category should get reflected on the componenets tab of the order?
    Can you guide me how to do this setting.
    Thansks

  • Usage of material in item category

    Hello could anyone tell me where could i go and change the usage of a material or menu path
    During item category determination 'usage' is a combination but i dont know where i can find a usage of a material.

    Hi,
    We come across the field Item usage in Customer material Info Record (VD51).
    After entering the information of our material with the customers information, select the line entry and click on details.
    We will come across the field item usage at the bottom of the screen. When once you change this the item category determination gets changed.
    If you want to create your own item usage, the path is as follows:
    SPRO - IMG - Sales and Distribution - Sales - Sales Documents - Sales Document Item - Define Item category Usage.
    Mohan
    Award points if it adds information.

  • GL accounts Hits- Sales order & Invoice ( for Service Material)

    Hi Gurus,
    While i create the sales order for a service material, which GL accounts hits in the system.
    and which GL accounts hits while creating an invoice for this order?
    Cheers,
    Sumith

    when you are creating an order nothing hits the GL account and when you create a bill it does. Now there are several entries in an Invoice which hits different GL account. Which specific do youwant to know. It will also differ from company to company how they manage their FI
    Regards

Maybe you are looking for