Invoking 'Send Mail' (F9) causes cursor to jump, characters to be skipped

In Siebel 8.1, using Dell laptops and desktops, when an agent presses F9, the Send email pops up, when the agent begins typing the cursor jumps about and some typed characters are not displayed.
Any ideas or solutions?

check for Internet Explorer addons which could interfer with Standard Siebel functionality.
Try deactivating all Toolbars and Addons which are not default and see if it helps.

Similar Messages

In Mail, typing an apostrophe causes cursor to jump or be mispositioned

On my new iMac (and the old one, both with current Yosemite), when typing text in Mail, whenever I type an apostrophe, the cursor changes position, sometimes jumping ahead, or other times jumping back a space after the next letter(s) are typed. For instance, typing I'll results in the cursor ending up between the two L's. Creates lots of typo's if I don't catch them. Anyone else experiencing this? Any suggestions?

check for Internet Explorer addons which could interfer with Standard Siebel functionality.
Try deactivating all Toolbars and Addons which are not default and see if it helps.

Hitting ENTER causes cursor to jump to other blocks

Hi,
In my custom 6i form, if the user accidentally hits ENTER on any field (null or not null), the cursor jumps to a particular block everytime. How can I stop this event to occur so the cursor stays at that field only?
Thanks.

I guess "Navigation" property of your form is set to block level. Change it to item level.

Mail writing: the cursor jumps in the middle of the word

While i am writing, it happens at random. It seems more frequent when i reply to a mail. The cursor usually jumps between the first and second letter when I am at the end of the word. So weird! Thanks for your help!

From the menu bar, select
Edit ▹ Substitutions
and uncheck all the options. Test. If the problem is resolved, you can experiment with re-enabling some of the options to further isolate the cause. You can change text replacements in the Text tab of the Keyboard preference pane.

My cursor keeps jumping all over the place in Mail since I installed Yosemite

I installed Yosemite yesterday, and now, whenever I try to write an email, my cursor keeps jumping all over the place. I can't write more than a few words without my cursor jumping back in the middle of one of the previous words. I makes Mail almost unusable. Am I the only one with this problem?

Similar problem. Mine seems to happen in mail - my cursor jumps to the line below and carries on typing - almost as if I'd pressed the down arrow to move the cursor. It seems to happen more when I type an apostrophe too.

Error in sending mail with dbms_job

Hello,
I have a procedure, that sends e-mails. Procedure works fine and sends the e-mails as far as I execute it from APEX "SQL Commands". It also causes no errors when I have submitted it to DBMS_JOB, but the procedure does not need to send any e-mails. However, as soon as it is executed by DBMS_JOB and the procedure calls htmldb_mail.send, there is a failure. Alert log:
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/bdump/xe_j000_31507.trc:
ORA-12012: error on auto execute of job 185
ORA-20001: This procedure must be invoked from within an application session.
ORA-06512: at "FLOWS_030000.WWV_FLOW_MAIL", line 109
ORA-06512: at "FLOWS_030000.WWV_FLOW_MAIL", line 139
ORA-06512: at "RAHEL.P_SEND_CASE_INFO", line 80
I suppose, that there is some security problem for DBMS_JOB to execute htmldb_mail.send?
What could be the solution?

Alar:
Please see this thread for a solution
Re: wwv_flow_api.set_security_group_id and sending mail external to ApEx
Varad

Problem while sending mail inOIM 11g r2

HI,
i am getting following error while sending mail in OIM 11G r2
<Jun 13, 2012 12:53:25 AM PDT> <Warning> <oracle.adfinternal.view.faces.renderkit.rich.SelectItemUtils> <ADF_FACES-30118> <No help provider found for helpTopicId=create_user.>
java.net.MalformedURLException: For input string: "SOA_PORT"
at java.net.URL.<init>(URL.java:601)
at java.net.URL.<init>(URL.java:464)
at java.net.URL.<init>(URL.java:413)
at java.net.URI.toURL(URI.java:1081)
at oracle.j2ee.ws.common.transport.HttpTransport.transmit(HttpTransport.java:61)
at oracle.j2ee.ws.common.async.MessageSender.call(MessageSender.java:64)
at oracle.j2ee.ws.common.async.Transmitter.transmitSync(Transmitter.java:134)
at oracle.j2ee.ws.common.async.Transmitter.transmit(Transmitter.java:90)
at oracle.j2ee.ws.common.async.RequestorImpl.transmit(RequestorImpl.java:273)
at oracle.j2ee.ws.common.async.RequestorImpl.invoke(RequestorImpl.java:94)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:811)
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:235)
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:106)
at oracle.j2ee.ws.client.jaxws.WsClientProxyInvocationHandler.invoke(WsClientProxyInvocationHandler.java:254)
at $Proxy422.send(Unknown Source)
But it is known issue in OIM 11gr2 .
solution is The cause of this error is malformed URL. To resolve the issue, provide the correct values for SOA_PORT and SOA_HOST in Enterprise Manager (EM).
BUT i didn't find the SOA_PORT,SOA_HOST in EM console.
Thanks,
Edited by: 853559 on Sep 20, 2012 3:09 AM

. Follow the steps mentioned below to configure the workflow notification properties:
•     Login to EM console as weblogic user.
•     Expand SOA.
•     Right click on <soa-infra> ANY ONE WILL BE REFLECTED. Select SOA Administration --> Workflow notification properties
•     Select "Email" from “Notification Mode” list
•     Provide notification service field values as:
o     Email : From Address * : [email protected]
o     Email : Actionable Address : [email protected]
o     Email : Reply To Address: [email protected]
•     Click Apply
•     Click "Go to the Messaging Driver page" link
•     Select configure driver: Provide Driver-Specific Configuration as:
o     MailAccessProtocol : IMAP
o     ReceiveFolder : INBOX
o     OutgoingMailServer : smtp.sample.com
o     OutgoingMailServerPort : 25
o     OutgoingDefaultFromAddress : [email protected]
•     Click Apply
If you are sending mail through xelsysadm account then change the value of “Email” field of that account .
Also configure Email Server ITResource .
Edited by: IAM_TECH on Sep 20, 2012 3:48 PM

Cannot send mail with no Host specified exception in ALBPM 6.0.4

Hi,
I try to send mail by using:
send mail
using
          from="[email protected]",
          recipient = "[email protected]",
          subject = "credit check",
          message = "you credit card is OK."
But as I debug it, an exception thrown:
Caused by: java.io.IOException: No host specified
     at fuego.io.SMTPClient.sendMail(SMTPClient.java:209)
     at fuego.io.SMTPClient.sendMail(SMTPClient.java:156)
     at fuego.components.OutgoingServerDebug.send(OutgoingServerDebug.java:37)
     at fuego.components.Mail.send(Mail.java:1210)
     at fuego.components.Mail.send(Mail.java:639)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
     at fuego.lang.ObjectTypeDescription.invokeMethod(ObjectTypeDescription.java:1463)
     ... 24 more
I have already set the mail server in the engine preference, and test successfully. Could you help me ? Thanks.
Best Regards,
Bill

try....use
mail outgoing server, add one external resource type "Mail Outgoing Service" imput informations and
use this code
     Mail reminderEmail;
          reminderEmail = Mail();
          reminderEmail.subject = "xxxx";
          reminderEmail.from = "[email protected]";
          reminderEmail.recipient= "[email protected]";
          reminderEmail.message = "xxxxx"
          MailSender sender;
          sender = MailSender(mail : reminderEmail);
          sender.send(implname : "mail");
mail --> is name external resource
Edited by: Marcelogim on Oct 24, 2008 5:53 AM

Sender Mail adapter encounters MalformedInputException

I have a sender mail adapter that processes the attached .csv file. All is working fine. I use FCC in module to convert the attachment and pass to an IDOC adapter for processing in SAP system.
My problem is sometimes the sender mail CC fails with ...........
exception caught during processing mail message[1]; com.sap.aii.af.mp.module.ModuleException: Transform: failed to execute the transformation: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException caused by: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'sun.io.MalformedInputException'; nested exception caused by: sun.io.MalformedInputException
It only fails with some files. At the moment when we test we FORWARD the email to our email account. If I detach the failed email attachment and attach it to a NEW email it will then work.
So why does it not work when forwarding emails? But it works when I attach the same file to a new email and send?
Other threads for this error seem to point to encoding. But how do I know which to use. I currently use the following in my module config:
Transfer.ContentType     application/octet-stream;charset="ISO-8859-1"

I have this in my configuration:
localejbs/AF_Modules/PayloadSwapBean   on local
TRANSFORM
localejbs/AF_Modules/MessageTransformBean   on local
txtxml
TRANSFORM   swap.keyName   payload-name
TRANSFORM   swap.keyValue   MailAttachment-1
txtxml   Transfer.ContentType   application/octet-stream;charset="ISO-8859-1"
txtxml   Transform.Class   com.sap.aii.messaging.adapter.Conversion
txtxml   Transform.ContentDescription   MailAttachment-1
txtxml   Transform.ContentDisposition   attachment;filename="MailAttachment-1.bin"
txtxml   xml.conversionType   SimplePlain2XML
txtxml   xml.documentName   MT_BCD_INVOICES
txtxml   xml.documentNamespace   urn://federalmogul.com/BCDTRAVEL/FINGLOBCD001/00
txtxml   xml.fieldNames   COST_CENTRE,EMPLOYEE_ID,PRODUCT_GROUP,COMP_CODE,BCD_ACCOUNT,INVOICE_DATE,TRAVELER_NAME,TRAVELER_FIRST_NAME,INVOICE_NO,AMOUNT_EXCL_VAT,CURRENCY1,AMOUNT_VAT,CURRENCY2,AMOUNT_DOC_CURRENCY,CURRENCY3
txtxml   xml.fieldSeparator   ;
txtxml   xml.lastFieldsOptional   YES
txtxml   xml.processFieldNames fromConfiguration
txtxml   xml.structureTitle   RECORDSET

Cannot send mail from my ipad

I cannot send mails from my ipad, I have checked settings with my mail server and they tell me that everything is OK, they don't know what may be causing the problem, any ideas?

TBS2.
There is no way for anyone to know if your problem is identical to the problem reported by maria_diaz. She didn't mention anything about getting the "relaying" message. I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

SEND Mail Step Mail body is not getting displayed in SOST Transaction

Hi Gurus,
    I have a very strange problem. I have developed a workflow to send notifications. My client wants to send notifications in different languages based on the user. If the users language is english, the notification mail should trigger in english. If the user's language is French, then the notification mail should trigger in French. like if the user's language is chinese, the notification should be in chinese.
     I have used the Standard text objects (SO10) and read the text based on language of the user into the workflow container element. We have passed that container element (which has the required text in users language) to text_lines in SEND MAIL step of the workflow. I am getting the text in the correct language based on the user.
    When the mail triggers to user, the user is getting a blank email. There is no body/text in that email. We have checked the SOST transaction and observed that the notification email doesnt have any body, even though we have the text in workflow log.   For the users who have the English language, they are getting the text in their mail, SOST and workflow log. Where as for the other languages (French, Chinese, Spanish etc...), they are getting the blank mail, (SOST doesnu2019t have body text) but in workflow log the correct text(based on user language) is getting displayed.
    I tested the same workflow in devlopment & quality, everything is working fine. All users (English & Non-English) getting mails in their respective languages. Where as in production, only for English users it is working, but for Non-English users it is not working.   I have compared all three environments workflow definitions and they are same. I do not understand why this is behaving differently in production. Could you please help me how do I resolve this issue.
    May I know, does any one has faced similar issue. I request you to throw some light in this area.
   Thanks in advance.
Regards,
V.Nagaraju

Hello,
Interesting! That seems like a foolproof way to handle the language problem
which can be a challenge in multi-language workflows. Please be sure to tell us
how you solve this and what the cause was.
You keep referring to the language of the "user". I assume you mean the
mail recipient?
You have to watch out with the workflow logs, they take the language settings
of the person viewing it into account when displaying texts, unlike SOST.
"I have used the Standard text objects (SO10) and read the text based on language of the user into the workflow container element"
Which user actually executes the method to do this? Is it WF-BATCH?
Are you using an actual SendMail step? And you reference the variable text_lines##
in the task description?
regards
Rick Bakker
hanabi technology

OSX update 10.10.2 causes mouse to jump around and text to be highlighted randomly in Dreamweaver CC 2014

OSX update 10.10.2 causes mouse to jump around and text to be highlighted randomly in Dreamweaver CC. When trying to click on a specific line of code in a js file the cursor ends up in a different place in the script and several lines of code highlighted. Clicking again jumps the mouse to a different position and even more lines of code highlighted and some characters rearranged, breaking the lines of code. Very frustrating.

Preran,
I am having the same issue. I have a MBP connected to 2 x Dell 27" monitors over Mini DisplayPort to HDMI cables. Once I updated to OS X 10.10.2 this cursor highlight/jumping around issue only occurs on the connected monitors. If I move the program to the main laptop display the issue goes away. It does not require me to restart the program or the machine to make it work correctly. One way I am able to identify the issue is if I go to the line numbers in code like I wanted to select multiple lines - in the one that works correctly, the cursor turns into a white version where the tip of the cursor points to the right. When it is wrong, the cursor stays black and will only have the tip point to the left. Its just another way I identified if it was working cause I tried uninstalling DW and reinstalling - didn't work. Reset preferences as you discussed - no go. And I used other editors like IntelliJ and Adobe Edge Code - all of which work fine and don't display this issue.
I tried the preferences reset you suggest and it doesn't work. I have another machine with OS X 10.10.1 on it and this issue is not there on any monitor. Any help with this ASAP as it pretty much stops you from being able to do any editing especially with longer pages as it consistently wants to page up when you select anything and if you then click again in another area it tries to move the highlighted code to that new spot.
Update: I have a USB Microsoft Arch touch mouse connected (always worked just fine). When I go to place my cursor at some point in the code it causes the highlight flicker. If I switch over and use the built in trackpad, then I can place the cursor without the highlight issue. When trying to select multiple lines or sections of code, that still see's the highlight, page up and move of code issues regardless of input type.

Sending mail to multiple recipients

Hello friends,
i have written java code for sending mail,its working fine for single mail address. if we include multiple mail address its giving ERROR:" Illegal route-addr in string" , so friends if there is any solution for this problem: please kindly reply. i have included sendmail->code and setproperty-> and the exact exception.
SENDMAIL
public boolean sendMail(User userObj, Message message, String content){
try{
util util=new util();
String arr[]=util.getTokens(userObj.email,",");
InternetAddress inetarr[]=new InternetAddress[arr.length];
for(int i=0;i<arr.length;i++){
inetarr=new InternetAddress(arr[i].toString());
message.setRecipients(Message.RecipientType.TO, inetarr);
MimeMultipart multipart=new MimeMultipart();
BodyPart msgBodyPart=new MimeBodyPart();
msgBodyPart.setContent(content, "text/html");
multipart.addBodyPart(msgBodyPart);
message.setContent(multipart);
message.setSentDate(new Date());
Transport.send(message);
return true;
}catch(Exception e){
e.printStackTrace();
return false;
}//End Of The Method
GETPROPRITIES
protected Properties getProperties(){
     Properties props = new Properties();
     props.put("mail.smtp.starttls.enable","true");
     props.put("mail.transport.protocol", "smtp");
     props.put("mail.smtp.host", adminObj.info.server[0]);
     props.put("mail.smtp.port",adminObj.info.server_port[0]+"");
     props.put("mail.debug","false");
     props.put("mail.smtp.auth", "true");
     props.put("mail.smtp.quitwait", "false");
props.put("mail.smtp.sendpartial", "true");
     return props;
}//End Of The Method
Exception
javax.mail.internet.AddressException: Illegal route-addr in string ``saravana.07
@gmail.com,[email protected]''
at javax.mail.internet.InternetAddress.checkAddress(InternetAddress.java
:883)
at javax.mail.internet.InternetAddress.parse(InternetAddress.java:819)
at javax.mail.internet.InternetAddress.parseHeader(InternetAddress.java:
580)
at javax.mail.internet.MimeMessage.getAddressHeader(MimeMessage.java:680
at javax.mail.internet.MimeMessage.getFrom(MimeMessage.java:340)
at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:897)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:583)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at common.application.utilities.TenderMail.sendMail(TenderMail.java:483)
at common.application.mail.send_user_mail.__BodhiReceive(send_user_mail.
java:146)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at jdbs.BodhiServer.callStation(Unknown Source)
at jdbs.BodhiSend.doSend(Unknown Source)
at common.application.mail.sendmail.__BodhiReceive(sendmail.java:361)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at JumpForwarder1.callStation(JumpForwarder1.java:863)
at JumpForwarder1.processRequest(JumpForwarder1.java:613)
at JumpForwarder1.authenticateUserAndExecute(JumpForwarder1.java:254)
at JumpForwarder1.doPost(JumpForwarder1.java:132)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:284)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:204)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:257)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:151)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:567)
at org.apache.catalina.core.StandardContextValve.invokeInternal(Standard
ContextValve.java:245)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:199)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:151)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(Authentica
torBase.java:509)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:149)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:567)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:184)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:151)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:164)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:149)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:567)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:156)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValv
eContext.java:151)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:567)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:972)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:20
6)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java
:833)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.proce
ssConnection(Http11Protocol.java:732)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java
:619)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
ool.java:688)
at java.lang.Thread.run(Thread.java:534)

You seem to be splitting a string containing multiple addresses and constructing
InternetAddress objects for each entry. But looking at the address it's complaining
about, it looks like you failed to split the string properly. You might want to use the
InternetAddress.parse method that will do the splitting for you.

Error while sending mail using script task in ssis 2008

Hi,
i am trying to send mail using ssis 2008 script task.for my requirement i am not able to use send mail task.
code i have used is
declared read only variables system::packagename
Dim PACKAGE As String
PACKAGE = Dts.Variables("System::PackageName").Value.ToString()
Dim myHtmlMessage As MailMessage
Dim mySmtpClient As SmtpClient
myHtmlMessage = New MailMessage("[email protected]", "[email protected]", "PACKAGE STATUS", PACKAGE + "WAS FAILED")
mySmtpClient = New SmtpClient("smtp.gmail.com")
mySmtpClient.Credentials = New NetworkCredential("[email protected]", "mypassword")
mySmtpClient.EnableSsl = True
mySmtpClient.Port = 587
mySmtpClient.Send(myHtmlMessage)
error i am getting is
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
Authentication Required. Learn more at
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
can any one tell me where i am going wrong

also getting error as follows
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
Authentication Required. Learn more at
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()

Error While sending mail

Working with 9.1.0.1
I have created a task which will send Mail to user when password is changed.
so in Notification Tab i Have clicked user check box and attached a appropiate Email Defination,
when task is triggered password is changed in OID but while sending mail i am getting below error.
I checked in metalink its shows when Email Server IT Res Name should be same as that configured in System property ,i checked both are same.
1 Dec 2011 18:06:54,735,[XELLERATE.REQUESTS],Class/Method: tcEmailNotificationUtil/sendEmail encounter some problems: {1}
lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:394)
at com.thortech.xl.dataobj.util.tcEmailNotificationUtil.sendEmail(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.checkForEmailNotification(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateSchItem(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpOIDMODIFYUSER.implementation(adpOIDMODIFYUSER.java:81)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUserData(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUser(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperationsSession.updateUser(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.updateUser(tcUserOperations_voj9p2_EOImpl.java:1763)
at Thor.API.Operations.tcUserOperationsClient.updateUser(Unknown Source)
at sun.reflect.GeneratedMethodAccessor485.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)

Create a task "Send Email" which will be called on SUCCESS of Change Password Task
Attach tcComplete in INTEGRATION tab And send Email from "Send Email" using Notification Tab
It seems that issue is with Change Password Task
Or Use APIs
Re: Send Mail via java code but using Mail Definitions

Invoking 'Send Mail' (F9) causes cursor to jump, characters to be skipped

Similar Messages

Maybe you are looking for