IOS 4 update causes crash on all new vehicles.

I have a 2010 Maxima and have been using the cars usb jack to charge/connect to my Iphone so I can play from my Ipod. It keeps giving the error message that my wires are not compatible, then my car tell me to check my usb connection. Ipod freezes therefore making me manually restart (top,home-center buttons) everything worked perfectly fine before the update. I'm guessing this is the same error many of you guys are getting from the ipod app overall. PLEASE HELP ME SOLVE THIS ISSUE.

Start with page 170:
http://support.apple.com/manuals/#ipad

Similar Messages

I want to ask if IPad 1 user are going to get any iOS updates ? Like the mail, new iTunes or passbook app from iOS 6?

I want to ask if IPad 1 user are going to get any iOS updates ? Like the mail, new iTunes or passbook app from iOS 6?

Sorry but no, iPad 1 wont have iOS 6, only iPad 2, new iPad, iPhone 3GS, 4, 4s and nos, iPhone 5

Sec. update causes crash. help using DiskWarrior

hello folks
I updated via Software Update and crashed mightily. I think I'm back up and running now.
1.Used Disk Utility once I booted in Safe Mode.
2.I used Diskwarrior to rebuild the "directory". Is that correct term?
Can someone plz coach me correctly using DiskWarrior to prevent HD problems.I installed the software but I would really like to use it correctly.
Thanks
Chuck S
iBook G4 Mac OS X (10.4.6)

"Just use it!" DiskWarrior is a great program which does its own thing very well and safely. Macs have an invisible "directory" file which the operating system itself (OS 8.x, 9.x, X v. 10.x.x, etc.) uses for itself to keep track of where it puts every bit of information stored on your hard drive, as a "file" is not stored in one contiguous space necessarily (like a single can on a pantry shelf) but pieces of the file are poked into the convenient spaces wherever on your hard drive. Because it gets changed so often by the operating system, the directory file itself can get fragmented and/or write-errors can occur to it, such that it becomes less than 100% reliable as a road map for your OS. Hence, DiskWarrior. In a couple minutes or so, DW collects all the information to create a brand new directory file, writes it unfragmented to your hard drive, and then erases your old fragmented directory file. (You can also run the "graph" function to see how fragmented is your directory file at any given time. I personally keep my fragmentation level at below 1-2% by running DW whenever it is over that. Consequently, I have not had crashes (as opposed to things freezing up for lack of sufficient memory requiring simply a restart) which are damaging since getting DW years ago.)
Should you ever have a catastrophic problem nonetheless, do not try to use your own computer, as the directory file may get further damaged. Alsoft's tech support is very good about helping using DiskWarrior under such circumstances, so contact them by telephone, or email from a different computer.
You might want to make a backup copy of your DW disk and use it routinely to keep your original disk pristine. When you run DW, you should/must boot up your computer using the DW CD and use the program on the CD. DW cannot rebuild the directory of an active system hard drive (as obviously, the active system's hard drive's directory file is the one needing rebuilding and it itself would be trying to rebuild itself if it were also the boot drive!)
PM9600/233 (OS 8.6); PM9600/G4 (OS 9.1); Perform 6320 (OS 8.1); MacPlus-OS 6.0.8 Mac OS 8.6 or Earlier

Ios 5.0 update caused errors in all my ibooks

I updated my Ipad to the 5.0 and now all of my books purchased on ibook are missng half the pages and errors on a lot of the remaining pages. tried deleting and downloading again but no change. Anyone else having this prob?

I hate to be the bearer of bad news, but the iPhone 3G does not support iOS 5. The iPhone 3GS is the oldest model that supports the iOS 5 operating system. The date keeps moving because you make it check for an update which there are none and the system keeps telling you it will check again in a few days. This is the normal operation of iTunes in terms of trying to keep your products up to date.
I hope this helps.

Installing new software update causes crash of my ipdo

I just downloadeed the new sofware update.
After installation I tunes wasn't abble to connect with my touch anymore. As I wantet to sett back the settings, its not able reset the ipod and always gets back to the page when asking for setting back the ipod for further use. Afer each set back... I cannot even start it or anything else
It worked properly before that update
Can anybody help

Welcome to the discussions,
try to connect in recovery mode (http://support.apple.com/kb/HT1808?viewlocale=de_DE) and restore "as new ipod" as shown here: http://support.apple.com/kb/HT1414?viewlocale=de_DE

IOS update caused Ipad to become unusable

While attempting to update to IOS 8.02 iPad became unusable. Not able to restore nor restart. What is solution?

People here have been having good results by setting it to factory default condition ...
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414
Here's someone's results from yesterday ...
keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
SOLVED: IOS 8 Issues on iPad 2:
I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
THE FIX: FIRST, be sure you have a current iCloud backup of your device. Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now! :-)
Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

Copy-into-Safari causes crash of all, in 10.4 & 10.5

My two computers -- iMac with 10.4.11 & Safari 3.2, and MB-Pro with 10.5.6 & Safari 3.2.1 with no Safari plug-ins -- are stable except sometimes when I "copy" into Safari (in URL field or a web-page field) which causes the Spinning Ball to appear, and when I use Force Quit Applications (Command-Option-Esc) Safari is "not responding".
Then most (but not all) other programs, both from Apple and third-parties like Word 2004, begin doing the same thing by "not responding" and sometimes even Finder crashes and I have to force Shutdown by pushing and holding the power-key. Has this common problem (for me) also occurred for others?

It might be easier to upload the whole crash log to a free file hosting service, such as http://rapidshare.com/
     This requires a program to use, but after a "copy-into-Safari crash" nothing works. Catch-22.
The log file should be under:
Hard drive > Users > YourUsername > Library > Logs > CrashReporter > Safari.crash.log
     "should be" but isn't -- I already checked this log 4 days ago (because a page I found by searching for "mac crash log" said to look there) but in it the last file listed is January 15, and there have been many crashes since then.
     4 days ago I also found a page in Wikipedia -- (CrashReporter_(Mac_OSX) -- which said to look in /System/Library/CoreServices/Crash Reporter.app. Crash Reporter
but evidently this existed in Tiger but doesn't exist in Leopard (someone else has an "update request" about this, so they couldn't find it either) and I haven't found any useful info from likely-named entries like Problem Reporter (it's an app that doesn't do anything when it's double-clicked, it probably is triggered automatically by a crash to produce the window with a HUGE amount of info that I cannot copy because after a crash nothing works) plus ReportCrash and ReportPanic (each produces a window with only a few lines of trivial info). And all of these 3 have not been updated since December or November.
    So... is there a permanent record anywhere? If yes, where is it?

Does Software Update CAUSE crashes, or come up AFTER crashes?

Over the past 6 months or more my machine has only hung (i.e. requires a press of a hardware button to restart), about 3-4 times. Each of those times, when I restart the first thing I see is the Apple Software Update screen. At least a couple (if not all) of those times the second thing I see is the Microsoft Office Automatic Update Screen.
I was in the office over the weekend, and no IT guys were around, and the OSX SERVER crashed (which knocked me off the internet, and also off the file server). When I restarted that machine, the first thing that came up was the Apple Software Update.
The question I have is:
* Could the Apple Software Update application be causing my crashes, or
* Am I seeing a feature where OSX says "hey you just crashed, let's check for updates now, even if it hasn't been a week (which is what your preferences say I should wait)".
Does anyone know? I've asked my IT guys here, and they've gone back and forth on it.
Thanks,

Why speculate? Chances are, if you look in the system console, you can find some information that might shed some light on this problem. The console is located in the Utilities folder.

Windows 7 Update causes Crash BSOD KB981957 on 11" Air

Trying to install update kb981957 results In a blue screen on boot with a 11 inch Macbook Air late 2010 running bootcamp Win7 x64.
Has to be rolled back via system restore to use.
Any suggestions?

i have also the same issue i installed windows 7 home basic to my MBA 11" then installed boot camp drivers, then update the windows unknowing this KB issues, now i'm facing the BSOD and have to re install everything..
so its this KB's 981957, 971033 that is causing this problem....i will try all this steps that you guys mentioned and hope for the best.
thanks

Recent Security update causes sluggish response in new computer

I recently ran the latest security update, and ever since my laptop has been sluggish. Simple things like trying to open a document on the internal HD, or open an external drive aliased to my desktop, give me a whirling colorwheel.
This is a new laptop and I didnt have these kind of issues before the security update, so I'm guessing thats the cause. I verified disk permissions after the update.
Anyone else having this problem?
Thanks
Duane

I verified disk permissions after the update.
Try repairing permissions and restarting your computer. If that does not work, try booting from your install disc & run _*Repair Disk*_ from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select _*Disk Utility.*_
Select the disk or volume in the list of disks and volumes, and then click *First Aid.*
Click _*Repair Disk.*_
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751

October CC 2014 update causes crash on OBJ import.

I have been trying to import an OBJ file (created in c4dr16, saved as .obj) into AE CC 2014 for use with the Trapcode Form plugin; without fail it causes AE to crash on import.
I've tried going thru the import menu, dragging the file into the prj with the same results - crash.
Connecting to all media via network to servers uptairs.
black trash can
OS 10.9.4
is it just me?

You will have to take it up with Red Giant/ Trapcode. That being said, C4D simply outputs crappy OBJ files. Download Blender, open your file in there and export it again as a much better OBJ file.
Mylenium

2014.3 Update causing crashes and data loss

I have recently update to Adobe Muse 2014.3 edition. Since then I have been experiencing many crashes, difficulty saving and file corruption. I was not sure if it was Muse or Mac Os errors until now. I can confirm my Mac is in good working order.
See attached screen capture for the latest problem - cannot save a file after making edits. Muse feezes on save.
Is it possible to reinstall the previous version of Muse? I cannot complete work reliably with the new update.
CY

The update fixed the problem, however I am now encountering a new one.
Uploading to ftp locations slows dramatically at about 60% progress, by about 70% progress I get the Mac spinning wheel, sometimes the transfer will progress incredibly slow, or Muse will freeze.
Today I could complete an ftp transfer and muse crashed. See attached screen capture.
I am now exporting html and then uploading va ftp app however when exporting I am still seeing a dramatic slow down at some point after 60%.
I am also seeing the following message pop up in web browsers (see attached image). I have been seeing this message a lot since the first update 2014.3
I thought these problems may be have related to my ISP, however I am in a different country now using two different IPS's but the errors still remain.
Regards,
CY

QT 7.04: Export to AIFF causes Crash in all QT related apps

This is similar to thread:
http://discussions.apple.com/thread.jspa?messageID=1635999
Here is my scenario though:
When trying to export a group of clips ( 2 hrs in length)
captured in iMovie 4.01,
to disc using the export to Mpeg-2 QT option, the audio doesn't fully export, it stops at the 55 minute mark, and
forgets the rest, although the file itself is the correct length ( the rest of where the audio is missed, is filled with blank space).
The capture itself is fine, and plays with audio to
the end of the two hour capture.
So I went back and tried just an export to AIFf using
iMovie to Quicktime Expert option, however, it causes
iMovie to crash.
When I go into QT Pro 7.04, and try to "preset" the
Audio export options there, it casues it to crash.
If I try and do an export to Aiff from Final Cut Pro 4.5,
it causes Final Cut to crash.
I looked back over the recent three weeks before this, and the only things I have installed recently have been
MpegStreamclip 1.7, and ffmpegx 0.0.9w.
I will try trashing the QT Prefs, as well as the prefs
for iMovie and FCP, but does anyone have any ideas?
I have aslo tried various other files, and if I try
to export AIFF, as long as i don't click the options,
it won't crash, but it won't complete either...

Hmm, I thought I had made it clear that the source originated
as a 2hour DV capture in iMovie?
When did QT abandon the Export to MPeg-2 feature?
Had to be after 7.04?
I did not have this feature in 6.0, 6.52,
and began to use it on and off in QT 7.01 and 7.02,
when I don't have the time/inclination to
setup a Batch and run it overnight in Compressor 1.2.1.
But we are digressing, because although that might
be a "fix" for the exporting to make compatible assets
for DVD Studio Pro, that still doesn't address
the issues with why just the audio drops out
(flatlines) after 55 minutes, or why exporting directly
to AIFF through QT causes every QT related app
(iMovie, FCP) to crash?
Here is a step further:
Here is a listing of all QT codecs I have on my system in
Library/Quicktime:
3ivx Delta 3.5
Indeo® Video5
Indeo® Video 4
Indeo® Video 3
3ivx D4 4.5.1 for OSX
Flip4Mac WMV Export.component
ffmpeg.component
ffmpeg DivX.component
DVCPROHDVideoDigitizer.component
ACTLComponent.qtx
A52Codec.component
OpenDivXCodecPPC*
OpenDivXCodecPPC Debug
OpenDivXCodecPPC
OpenDivX.component
on2vp3.component
On2_VP3.qtx
On2_VP3
OggVorbis.component
DVCPROHDVideoOutput.component
DesktopVideoOut.component
Sorenson MPEG4 Encoder
Sorenson MPEG4 Decoder
QTFbx.component
VivoActive Siren Decoder
VivoActive G723 Decoder
Vivo Plugin
VDOwave MS Video Decoder
Toast Video CD Support.qtx
Toast Video CD Support
Toast Video CD Export
srtImport.bundle
Sorenson Video Pro OSX.qtx
ZyGoVideo.component
DVCPROHDMuxer.component
ZyGoVideo.qtx
XVIDDelegate
AXELplayer.qtx
DVCPROHDVideoOutputCodec.component
DivX 6 Decoder.component
FCP Uncompressed 422.component
DVI Codec
Sorenson MPEG4 Reassemble
Sorenson MPEG4 Pro
Sorenson MPEG4 Packetizer
MAYA_IFFExport.component
MAYA_IFFCodec.component
LiveType.component
lame 3.92.shlb
VIDEC™
VDOwave Video Decoder
KinomaExporter.component
Intel Raw Video
Indeo Video
H.263 Decoder
H.261
Flip4Mac WMV Import.component
msmpeg4v2.component
msmpeg4v1.component
MPG4-DIVX
MPG4*
MPG4
MPEG Layer-3 Audio
Microcosm Decode.component
MAYA_IFFImport.component
WMA Audio
Windows Compressors
VivoActive Video Decoder
AC3 Codec.component
DivX Pro 5.component
EyeTV MPEG Support.component
DVCPROHDVideoOutputClock.component
DivX Codec
DVCPROHDCodec.component
Zoomify.component
DivX 5.component
I plan on removing these, in groups of five, starting with the oldest to newest, and seeing if one of these might be the culprit. Any other input would be appreciated....

Windows update causing BSOD in my new B50-30 with DRIVER-IRQL error

Hi folks - I'm really hoping someone else has found a way to deal with a similar issue.
I bought a b50-30 about three weeks ago, and everything has been fine until the latest rounds of Windows updates. During the normal update blue screen, It got stuck (I gave it 24 hours just in case!) on "update 5 of 31", so I eventually had to force restart. That led to a blue screen with the annoying smiley emoticon for a frown, and it claimed to be "collecting some error I fo and then we'll restart for you" but it showed a 0% progress reading, which didn't change during the 12 hours I (patiently) let it run. The specific error message was DRIVER-IRQL-NOT-LESS-OR-EQUAL. Eventually I force-restarted a second time and went into Safe Mode, and the updates appeared to restart and make progress. Eventually the computer started normally again. Victory?
All was fine for a week, and then the bloody thing got stuck on the next round of infernal Windows updates, this time not getting past "28 of 61 updates". When I force restart, I get the BSOD with the same DRIVER-IRQL error message and the same 0% progress reading that won't make progress no matter how long I leave it. Unfortunately, this time, opening in safe mode won't work for me, as it merely brings me back to the identical BSOD screen. Now I have no way to restart the bloody thing at all (other than going for a full recovery, which I'm hoping to be able to avoid). I also tried the "refresh" function, which went through the percentage progress fully, but resulted in the same BSOD. Interestingly, it won't allow me to "restore".
Does anyone have any brilliant advice, other than throwing it out a window and never buying either Lenovo or Windows again?
Thanks all
EJS

hi Arie,
Welcome to the Forums.
If you;re able to see the SSD in the BIOS and/or see it under Disk Management while using the stock HDD then you may want to consider the following:
1. Boot from the stock HDD and update the BIOS
BIOS Update Utility - Ideapad 305-15IBY, Lenovo B40-30, B50-30, B50-30 touch, E40-30 Laptops
2. Update the SSD's firmware to MU02 (latest as of this writing).
http://www.crucial.com/usa/en/support-ssd-firmware
3. Using the stock HDD, connect the Crucial SSD and convert the volume to MBR first to see if there's a compatibility using the drive as GPT.
If none of the above methods works then there's likely a compatibility issue with the SSD's controller and/or the BIOS (similar to this thread). In this case, consider using a different brand (e.g., Samsung) and observe.
Regards

Why did last Update cause crash making apple tvs unusable?

Both my apple tvs are unusable now since the latest update. Help!
I've tried restarting. I've tried unplugging.

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

IOS 4 update causes crash on all new vehicles.

Similar Messages

Maybe you are looking for