IOS 5 contact bug

Getting an issue with contacts, when i receive any call if the contact are saved with the country code, the names will not be displayed, any one else with the same issue??

http://thestartupfoundry.com/2011/11/10/nasty-bug-in-ios-5-0-1-ota-update-screws -up-address-book-on-the-iphone-4s/
http://thenextweb.com/apple/2011/11/11/battery-life-issues-linger-and-address-bo ok-bug-surfaces-after-ios-5-0-1-update/

Similar Messages

  • Unable to use iMessage on Mac with non-IOS contact with Yosemite and IOS 8.1

    I have an iPhone, an iPad running IOS 8.1, and a Mac running Yosemite.  I have set up all 3 to use iMessage, entering the codes as requested.  The 2 IOS devices work fine and the Mac works fine on messages to contacts with iPhones but non-IOS contacts remain red and are not accepted and if I try to send a group message with a non-IOS contact I get  "XXX cannot be added to the group chat - XXX is not registered with iMessage".  I have tried deleting and replacing the contact and it still will not accept her.  I understood that this would be fixed after updating to Yosemite and IOS 8.1 but the upgrades have not resolved the problem for me. 
    In my Mac iMessage preferences:
    1-I am signed in with my Apple ID and the account is enabled. 
    2-In the "You can be reached for messages at" field, I have my iPhone number, preceded by a +1 and the area code and 3 email addresses (icloud, me, and gmail)
    3-in the "Start new conversations from" field, I have my cell phone number  - also with a +1 and area code.
    4-I have checked all of my Apple ID and iCloud details and they are all correct. 
    All other Handoff features appear to be working correctly.  Any help or suggestions would be appreciated.  Thanks very much -
    Mary Ellen

    Hi,
    It will suggest and look like it will auto-complete until you type further.
    As 204 is unlikely to be the full number the issue does not arise.
    For instance if I start typing my name every option that I have listed with my name over three Contacts card (for my three computers) and some Accounts not linked to Address Cards are listed
    Of course this lists also shows cross connections between the accounts making the list longer.
    10:13 pm      Thursday; February 26, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • My britness on my iphone 5 was on 100 % and I turn my screen off and after ten min I turn it back on and the screen was on 0% while the britness line on settings was on 100% is it an IOS 6 bug or is my iphone borking???

    My britness on my iphone 5 was on 100 % and I turn my screen off and after  10min i turn it back on and the screen was on 0% while the britness line on settings was on 100% is it an IOS 6 bug or is my iphone broking???

    I've seen that happen sometimes. For me, pressing the lock button to lock it, and then pressing the home button to get to the lock screen reverts it back. If that doesn't work, just move your brightness slider lower and then higher again.

  • Another iOS packager bug

    Came across another bug in iOS packager. In my project I have a function looking like this:
    private function sample():Object
         var iValue:int = 10;
          return false ? iValue : null;
    It correctly returns 'null' if packaged in ipa-debug-interpreter, apk-captive-runtime modes or if running in ADL. But it returns '0' if packaged in ipa-ad-hoc mode. I had to spend a whole day to figure out where is the problem. This is not the first type cast issue I came across. And it takes a lot of effort everytime to debug (10 minutes to build the project!). I'm breaking a dead line giving my customer an excuse that 'Adobe packager for iOS does not work right'. Which sounds like total BS of course. Adobe, please, get this straight. It is hard enough to develop with AIR for mobile. Bugs like this one make it much worse. Either way, I'm planning to advocate for using native tools in our next projects.

    I'm still using AIR 3.2. Unfortunately, I don't have a chance to try latest AIR 3.4 at the moment. But I will check the same code when I update AIR SDK.
    The code I posted is not a real code of course. I had to strip some logic and modify operators a bit. But I had hoped the bug would still reproduce. From my experience, most of the iOS packager bugs are caused by the rules of type casting that are not AS3 compliant. I have an impression that type casting rules used in the packager are more like classic C type casting rules. As the result, same code executes differently on iOS and Android|Windows. And it has being a huge problem for me.

  • Possibly one of the biggest iPhone 5 or iOS 6 bugs - Misuse of Data

    My iPhone 5 keeps sending and receiving data when an iCloud account is configured on the device. It never stops to receive and send data; therefore, this is causing Verizon data overages. The cellular data counter in settings just keeps going up. This occurs when no apps are active. I am averaging about 2 to 3 kb of data a second being used, which adds up. Is this an iOS 6 bug?
    Resetting the phone to factory defaults or uninstalling third party apps does not resolve the issue.

    Just do the Verizon update - Settings > General > About then accept the update & reboot your phone. It should fix your problem

  • Any solution to the iOS 6 bug for auto lock function for the iPhone 4S

    Any solution to the iOS 6 bug for auto lock function for the iPhone 4S

    My guess is they don't care. Most likely they're illiterate and don't know what a colon is for. They probably think it's a little-used character. Remember: these are the people who don't know the difference between "deprecate" and "depreciate".
    I have the same colon problem as you do. But it's not the biggest problem I have encountered in Lion. If it was only that I'd be Mr. Delighted with Lion. There's worse than having a colon - uh -  that won't cooperate. A lot worse, in Lion.

  • IPhone apps not resuming after phone call - iOS 7 bug

    iPhone apps not resuming after phone call - iOS 7 bug
    With iOS 6, while playing music on Spotify or playing Candy Crush, etc, if the phone rang and I answered, or if I made a call, once the call was ended, the app I was using would resume. The music would start playing again or the game would resume.
    In iOS 7 this isn't working. Listening to music, I answer a call, music stops and when call is ended, nothing! the phone stays on the phone app.
    anybody else see this behaviour?
    thanks!

    Any ideas anyone?
    thanks

  • Bug in iOS Contact

    This looks like a bug with the latest iOS update. I can't seem to go to a specific field in Contacts, the cursor jumps to the next field. The only way to update that field then is to go to the previous field. But that leaves me with the problem of filling in First Name....
    Anyone else facing this?

    Try power cycling your device. If that doesn't work, then try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. Test then. I actually added two different contacts today on my iPhone 5s running iOS 8.1. Once I added from a phone call I received, the second was just adding one from scratch in Contacts.

  • IOS 5.0.1 contact bug

    http://www.appleinsider.com/articles/11/11/12/briefly_phil_schiller_ios_5_0_1_co ntact_bug_99_iphone_4s_in_puerto_rico.html
    at least american customers are complaining now. May be apple will do something about it. I am so sick of the situation even contemplating getting an android.

    http://thestartupfoundry.com/2011/11/10/nasty-bug-in-ios-5-0-1-ota-update-screws -up-address-book-on-the-iphone-4s/
    http://thenextweb.com/apple/2011/11/11/battery-life-issues-linger-and-address-bo ok-bug-surfaces-after-ios-5-0-1-update/

  • Linked contacts bug : SMS or e-mail sent to incorrect address or phone number.

    Hello,
    I sync contact on my iPhone 5S ios 7.0.4 with four sources :
    - icloud
    - Outlook.com (Hotmail) - my private mail
    - Exchage - my work mail
    - Facebook
    When a conctact in present on Hotmail and on Exchange, the contact appears once on the iPhone and it's correcty linked but when I want to send a SMS or an e-mail, the message is not sent to the correct number.
    For example a contact (John Smith) is present on Hotmail and on Exchange with the following information
    Exchange :
    Name : John Smith
    Work phone : 1234
    Work mail : [email protected]
    Hotmail :
    Name : John Smith
    Mobile : 7890
    Work phone 1234
    Private mail : [email protected]
    Work mail : [email protected]
    The linked contact on the iPhone looks like :
    Name : John Smith
    Mobile : 7890
    Work phone 1234
    Private mail : [email protected]
    Work mail : [email protected]
    If I want to send a SMS to the Mobile of the contact following this procedure, the SMS is sent to the work phone
    1) Open Mesage app
    2) Click on new message
    3) Click [+] to open contact list
    4) Choose "John Smith"
    5) Choose Mobile phone
    6) Type the message
    7) Click "Send"
    The SMS is sent to Work phone
    If I use anothe procedure, the SMS is sent correctly to the mobile :
    1) Open Mesage app
    2) Click on new message
    3) Type "John Smith" into the "To" zone
    4) Choose "John Smith Mobile"
    5) Type the message
    6) Click "Send"
    Same problem with e-mail address in the mail application.
    If a contact is only present in one source (not linked) there is no problem.
    I think it' a bug in linking contacts.
    Thanks

    I don't think so. When i open the Exchange contact on the iPhone (Contact --> Linked --> Exchange) the work number is not tagged as mobile end there is no message icon next to the phone number.

  • IOS 6 bug - countdown timer

    I just upgraded my iPhone 4 to iOS 6 and found a strange bug: when setting the system time format to 12-hour time, then open Clock - Timer, if I set the timer's countdown duration longer then 1 hour, after starting, the timer displays the countdown time in a very strange style (see the attached screenshot). But after setting the system time format back to 24-hour time, this timer's dislay problem disappeared. Really weird bug.

    I too have this on my iPhone 4S, I am in the UK, and I like to have the 12 hour setting for my time, but when this is the case I get the same strange problem as QQ as shown,  ALSO... I believe if I run the Stopwatch and it goes over an hour then the display goes strange in the same way.  Apple feel free to contact me, so I can help you resolve this for iOS 6.0.x.
    Thanks
    Daniel

  • IOS contacts issue

    After i upgrade my iphone from 4.3.3 to 5.0, its very difficult to  view contacts. If I save a contact including country code, the names will not appear in incoming calls but name appear in message and vs.
    So this is like old Nokia phones. I wonderwhether this is a bug or Apple just changed this whole thing. Its very difficult when this happens. I have to save every contact with country code and without. This is a temp solution i found. I think iOS 4.3.5 contacts works same as this. I kindly request Apple to fix this.

    Is this forum only for the US? Maybe I'm intruding here by posting this?
    Not only the Verizon version unfortunately. We have the same problem here in some parts of the Middle East. I have heard reports from Kuwait and Bahrain, and I'm located in Oman and the problem exists here as well. And no solution except downgrading the phone back to iOS 4.3.5.

  • Bluetooth not discoverable iOS 7 - bug or hardware problem?

    Just got an iPhone 5c and Bluetooth is not discoverable at all. For example, in my car when searching for a device it does not find it. Likewise, if I seach for it on another iOS phone, it just doesn't exist.
    I have an iPhone 5 with iOS 7 and that connects fine to the car with no problems at all. I'm thinking this could be a hardware problem, but just wanted to check if it's been reported as a bug by anyone else?

    A bit more on this: 
    When Bluetooth was switched on, but Airdrop set to Contacts Only, the phone was discoverable by the car but did not work correctly - it connects via Bluetooth but the car display shows no signal and cannot make calls through in car audio.
    With Bluetooth switched on but Airdrop set to Off, phone is no longer discoverable by the car
    Frustatingly, I don't have access to both the phone and car to test the final scenario of Bluetooth on and Airdrop set to Everyone to confirm what I suspect will be the case.
    If the final scenario does work, this has to be a pretty significant bug in the software, right?

  • Import SIM contacts bug iOS5

    Since the release of iOS 5.0.1 all the iPhones I have come across have this very annoying bug.
    When you add contacts to the phone, and go to say your messages, instead of showing the name of the person that the message is to/from it still just shows the number.
    I know this problem is fixable as a friend got his sorted out at a Telecom store, however nowhere I look online seems to have any info on this.
    Any help would be appreciated

    None of the iPhones I have come across since the release of 5.0.1. display that behavior.

  • 3 iOs 5 bugs no one seems to be talking about

    I've noticed 3 bugs in iOs 5 that no one seems to be talking about.
    1.  Sometimes the setup personal hotspot toggle in settings will keep thinking even if you don't tap on it.  I believe this contributes to the poor battery life.  I've found the only way to stop this is to reboot with home & power buttons.
    2.   When playing a movie or music the fast forward/search toggle on top is unresponsive.  It takes up to 5 times sometimes for it to pick up that my finger is on it, and by this time it's already skipped around so much that it's pointless.
    3.  This last one is more of an app compatibility issue.  Google's search app times out and is useless now since opening Safari and using the search function in the corner works much faster.
    APPLE PLEASE ADDRESS THESE ISSUES IN THE NEW iOS UPDATE

    ddizzd,
    You're not addressing Apple here, only other users just like yourself.  You're just wasting your time and breath on this forum.  You need to post here:  http://www.apple.com/feedback/iphone.html

Maybe you are looking for