Ios 7 release time uk

I know that ios 7 is coming out tomorrow but do u no what time will it be literally 12:00 am or like at. 9:00 am pls help
Thanks

Nobody knows. It'll be released when Apple release it.
Keep an eye on Twitter. From previous years, that seems to be a good source for when it actually becomes downloadable.

Similar Messages

  • IOS 7 release Time

    iOS 7 release Time in Sri Lanka ......
    Places Tell me.....
    Sent from my iPhone Firdows.....

    See this current discussion...
    https://discussions.apple.com/thread/5316224

  • Is every ios release overtakes the previous firmware version ?

    Well I dont Know from where to start ....
    I am using an Iphone 5 the problem is I am stuck in the recovery mode due to error 1 which is obviosly a hardware issue and most likely to be a baseband problem but here it is why am I asking this question because I was running ios 7.0.6 and suddenly the iphone became in ''Searching..." mode so tried the factory settings by erasing all data and settings but couldn't help so I went DFU mode and restored my iphone using 7.1 IPSW and Wizardry the iphone worked for just one day then the same problem ''Searching..'' .
    So I went DFU mode again but this time I let itunes to update to the latest firmware version which is IOS 7.1.1 and then amazingly the phone worked for few hours but then again same problem '' Searching..." and BTW EVERY THING WORKING FINE EVEN WIFI EXCEPT THAT NO CALLS,TEXTS OR CELLULAR DATA AND THERE IS NO IMEI OR FIRMWARE.
    So I went DFU for the third time but I got the error 1 alert message and Now I am stuck in Recovery mode.So .. Is that means that every IOS release over takes the previous firmware ... which means if I waited for the next IOS 7.1.2 or IOS 8 hopefully I will be able to get out from the recovery mode and run away from the error 1 alert monster ? ... and I know the problem searching might occur again but I think I might give up then for this handset then. But I want to try all the solutions and options I have in my hands since I got no AppleCare/Store in my Country

    It is true that updates may potentially bring changes to some firmware as well as software, but not every thing changes in each update.  If your hardware is failing compatibility with the current firmware, I would bet money that you are going to have issues with future versions as well.  The iOS assumes that your hardware is in working order when it was designed and a failure in that hardware results in these errors and the inability to operate using the firmware.  To assume that a different firmware (especially a future firmware update) will fix you issue is close to absurd, unless that firmware version made all iPhones (or even most) have hardware communication issues.  Until that day, Apple is not going to alter the firmware.  Also you stated that it worked then stopped multiple times and now you receive error 1, which during the update basically means the iPhone is not passing the hardware test, so even with a future update, the hardware is not going to pass the diagnostic test when installing firmware, therefore you will still need service.
    Even if you have to send it off to a friend in the country of purchase, it's going to be better and faster than waiting on something that has a 1% chance of success.

  • HT4623 how do i get 'via ios' every time i post something on facebook?????? plzzzz help if u can

    how do i get 'via ios' every time i post something on facebook?????

    Try a search of the forums or ask Facebook is using their app.

  • PLANNING TIME FENCE and RELEASE TIME FENCE

    Hi, I am on ver 11.5.10.5. We are using MDS and MRP here.
    Trying to understand the right meaning of planning and release time fences , so that I can define the right time fences in the item attributes.
    My cumulative manufacturing lead time for top assembly is 12 days. Should this be the planning time fence.(12) ?
    Time taken to run MRP (1 hr) and manually release all planned orders to PO or WIP is 4 days. So should 4 days be the release time fence. Auto relase feature is not being used.
    Am I on the right track here , or is the track totally missing?

    James,
    The Planning Time Fence is the point that you want no new planned orders to be created prior to. In MRP this was based on the suggested dock date for (buy) orders and suggested due date for (make orders). Whatever you set the value to, no new planned orders will get created earlier than date.. even in an unconstrained plan
    So as a practical point, how far ahead do you want to create your WIP jobs? If you are creating WIP jobs now for next week and your build LT is 5 days, you may want to be a user define value of at least 5 days. This would put the suggested due date of the planned order on day 6 (5days + today), the suggested start date would be today. You can also add a pre-processing lead time to make the suggested order date earlier and monitor that value. I would test these, understand the attributes and the resulting dates and determine the right value.
    The Oracle ASCP User Guide has a good description of lead times that you should review on page 6-90. Most of this information is the same as old MRP, but some has changed. You can also review the inventory user guide to get a description of these attributes.
    If auto release is not used, the auto-release item attribute is not used.
    Regards,
    Kevin

  • Credit release time for a given sales document or delivery doc...

    Hello Experts,
    I need to get the credit release time of a given sales document or a
    delivery document. What table can I get this info? Thank you guys and take care!

    Hi
    I think there won't be a SAP table field with the description
    'credit release time ' can you be more clear about the field you need?
    But you can check the VBAK and VBAP for SAles order related data
    and LIKP and LIPS for Delivery related data
    Reward points for useful Answers
    Regards
    Anji

  • Release time for production order

    HI
       Want to know  the release time of the production order.Is it possible in any of the base reports
    regards,
    PradeepM.

    Display the production order, press the "I" icon on the status line, position the cursor on the "REL" status line, and go to menu option "Extras", choose "Change Documents --> for status".
    Mario

  • Cisco IOS Release/Train codes

    Hello,
    I'm looking for the descrition of IOS Release/Train codes. I see alot of IOS releases (12.2SXE, 12.2SRE, etc.).
    I know only some of them. For example: S - for Service Providers, T - Technologie train, E - Enterprise train.
    But what about another: X, R, etc. ?
    Can somebody help me to find a full description of ALL IOS Release/Train codes?
    Thank you,
    Piotr Covalciuc

    Hello,I'm looking for the descrition of IOS Release/Train codes. I see alot of IOS releases (12.2SXE, 12.2SRE, etc.).I know only some of them. For example: S - for Service Providers, T - Technologie train, E - Enterprise train.But what about another: X, R, etc. ?Can somebody help me to find a full description of ALL IOS Release/Train codes?Thank you,Piotr Covalciuc
    Hi Piotr Covalciuc,
    IOS routers would use the 12.4M (Mainline) or 12.4T (Technology). You will find the T train to contain the newest features but it may also contain the most bugs. We often recommend Mainline over T train if you are interested on stability in your network without the need of new features.
    Other tracks would be platform specific, for instance;
    12.2SX = Catalyst 6500
    12.2SE = Catalyst 3xxx switches
    12.2SR = Cisco 7600 Routers
    12.2SB = Cisco 7200 and 7300 Routers.
    and check out the below link hope that help !!
    http://www.cisco.com/en/US/products/sw/iosswrel/ps1818/products_tech_note09186a0080101cda.shtml
    If helpful do rate the post
    Ganesh.H

  • Does Apple plan to discontinue support/update for 2nd Generation iPod touch as latest iOS release for it is 4.2.1?

    I have 2nd Generation iPod touch and latest iOS release for it is 4.2.1. Most of the Apps on iTunes now require iOS 4.3 at minimum. Isn't it outrageous that Apple is not supporting such iOS update for older iPod? Is there plan to discontinue such support?

    I have a 2nd generation iPod Touch too and I currently have 24 Apps that I cannot update. Unlike you however, I hold the App developers responsible for the fact that they (the App developers) are not supporting iOS 4.2.1.    
    It is the App devloper who decides to modify their App so that it then requires a particular version of the iOS. Since a developer can have a free and a paid version of an App, it begs the question why don't they have the older and newer versions.
    I now check the requirements for an App before I click on update. If it still only requires iOS 4.2.1, then I can update. If it requires a higher iOS, the I simply don't update it. One good thing is that by now, most of the older Apps are quite stable and bug free, so the update is usually to give something extra. Since I cannot update the App, I simply forgo the "extras".

  • Next iphone released time

    Next iphone released time pizz ? & radio application

    How would we know?  We don't work for Apple.

  • Implementing Release Time Fence in ASCP

    we are using unconstrained ASCP and we have to implement Release Time Fence, so that purchase requisitions & Work orders can be released automatically through ASCP.
    which Profile needs to be changed & what other necessary action to be taken before implementing it?
    Pls guide!!

    Hi,
    Below are some of the causes.
    1. Check if they are configured items. if so, then make sure in the Tools/Preferences -  Other tab - In the Supply Demand Region the check box Release Configurations is enabled.
    2. Check the WIP Supply Type of item and if its phantom then make sure in Tools -> Preferences -> Other -> Release Phantoms check box is enabled.
    3. Make sure the order type is Planned Order and not Planned order Demand.
    4. Also check if these planned orders are for MPS/MPP planned items and are from some other demand schedule plan. If so, then ensure
    MSC: Allow MRP Release of Planned Orders from Demand Schedule Plan profile is set to Yes.
    5. Is that planned order shown in pink color.
    Thanks,
    Abhishek Sharma
    Please mark the post correct or helpful, if answered

  • Report for Release time of Notification???????

    Dear Experts,
               I want a report where I can get the time when Maintenance Notification is Released.
               It is better if I get Standard report with MAlfunction Start , Malfunction Time and Release Time.
    With best regards,
    Narendra

    Hi Pete Sir,
              I saw the interesting Post in d morning itself(Indian STd time). This post is what i m looking for , But all these things I wanna do for Notification , The first 2 steps i hv already done, but for updating the Structure RIHQMEL_LIST I dont know how 2 do this because there is no standard include where I can insert the User fields I hv used in Screen Exit.
             Also Where I am implementing consist of 6-7 companies with 15 Plants.
             Can u tell me any complications or apprehensions in appending the structure. Can it affect working of other Plants and in what way.
              Please advice.
    Narendra
    Edited by: Narendra Dere on Feb 9, 2009 11:32 AM

  • 2.0 Update Release Time

    Does anyone know what time (GMT) the updates will be avaliable (tunes 7.7 + 2.0 firmware) on the 11th? I am leaving early the next day, and because it will be a long drive, I want to be able to install the update and some games for the journey.
    thanks

    Actually, Chris, the July 11th release of v2.0 is not speculation. In the official Apple iPhone 3G press release, Apple stated, +"iPhone 2.0 software will be available on July 11 as a free software update via iTunes® 7.7 or later for all iPhone customers."+
    Of course, it technically is speculation that the upgrade will be available for the iPod Touch on the same date, but that's almost a given.
    Release times have not been announced, but in the past, firmware upgrades have been rolled out geographically.

  • When will iOS 5 actual release time be? Like at 12:00 am or 10 am?

    Okay. I really don't post anything here but I think this was the best place for this question. If not sorry.
    As of before all of iOS updates have been in the morning at 10 I think. Will this year be different. I wouldn't mind updating my iPhone at 12:00 am. In fact that's the time I'll most likely update anyway because of busy schedule. So what do you guys think? Will be released at midnight(12:00am) or later in mid morning (10:00am)??

    pierrefromtzaneen wrote:
    I would also like to know, as there is a time difference of 10Hours between South Africa and You guys.
    "Us guys" are all over the world, and just users like yourself. We have no idea what time it will be released. Here's an idea: download it the next day, at the most convenient time for yourself, and when the servers have stopped crashing. The chances are your life should continue long enough without iOS 5 for this to be possible.

  • IOS 5.0 Release Time 12th November

    Just a general question, wondering what time will the update iOS 5 be released, GMT time? I assume it will be released after 12:00 a.m. California time, which is approximately 8 hours difference to the UK.

    You're most likely 8 hours ahead of the time in Cupertino.  Lots of people seem to think it will be released around 10AM there, so that would be 6PM for you.  I don't know how accurate any of those people are, but.. we shall see in a few minutes
    Greetings from across the ocean!

Maybe you are looking for

  • Real server to access a different Virtual server in same context ??

    Hi all, I got a scenario need to clarified before go to production. Below is my traffic explaination SETUP Context WEB -1st Virtual server (10.10.10.1) - > bind 2 Real Server ( 1.1.1.1 and 1.1.1.2) ->sticky configured Context WEB - 2nd Virtual server

  • Error on MBAM Clients while start the encryption

    Hi, I am getting multiple issue while start the encryption through MBAM Client. Currently I am getting below to logs on MBAM clients 1. Log Name:      Microsoft-Windows-MBAM/Admin Source:        Microsoft-Windows-MBAM Date:          02-04-2014 19:09:

  • Bridge and AP, using a 1200 series bridge.

    Hi Folks, I would like to bridge from an AP1131 to an AP1262 using the 5.8 ghz radios then allow access via the 2.4 ghz radio on the 1260.  I will use a directional antenna for the 1260 bridge to optimize performance.  The 5ghz radio will only be use

  • How to get smaller window of picture in pe10

    I'm new to pse10.  I recently saw someone draw in the Program and saw that they had two screens: one was what the picture was as they drew up close and the 2nd was the same photo but was from its true size.  Both were changing real time.  Can anyone

  • Terrible audio quality in 5.1 mode

    Hi ! This issue has been here for a while, but it's only now that I come to try to get a fix for it ... So, it's been a few version that I've noted that the sound was really bad when playing videos on youtube and came to realize that this was fixed w