Real server to access a different Virtual server in same context ??

Hi all,
I got a scenario need to clarified before go to production. Below is my traffic explaination
SETUP
Context WEB -1st Virtual server (10.10.10.1) - > bind 2 Real Server ( 1.1.1.1 and 1.1.1.2) ->sticky configured
Context WEB - 2nd Virtual server (20.20.20.1) - > bind 2 Real Server (2.2.2.1 and 2.2.2.2) ->sticky configured
My question is
User will HIT 10.10.10.1 and load balance to RS 1.1.1.1 and 1.1.1.2, RS 1.1.1.1 and 1.1.1.2 will need to go destination 20.20.20.1 and ACE load balance to 2.2.2.1 and 2.2.2.2.
Will RS1.1.1.1 and 1.1.1.2 success HIT 20.20.20.1 and ACE can load balace to 2.2.2.1 and 2.2.2.2 and response to RS1.1.1.1 and 1.1.1.2?
Any comment is welcome !!!
Thank you,
Meng Kiat

Hi Meng,
It is possible. You need to apply the Virtual server (20.20.20.1) policy to the server side Vlan interface.
That way server ( 1.1.1.1 and 1.1.1.2) can hit virtual server (20.20.20.1)
This should work just fine without any trouble.
regards,
Ajay Kumar.

Similar Messages

Linked Server to Access Database in SQL Server 2012 is working perfectly.But, All of sudden it is showing SQL Error Code:7303

Linked Server to Access Database in SQL Server 2012 is working perfectly.But, All of sudden it is showing SQL Error Code:7303
Unable to connect to the database type that is created with earlier versions type. But the same Linked Server in another SQL Server instance is working perfectly. I am unable to rectify what is the problem please help.

All of sudden it is showing SQL Error Code:7303
Error 7303 = "Cannot initialize the data source object of OLE DB provider "%ls" for linked server "%ls"."?
Check the data Provider on the machine, e.g. using ODBC Admin by creating a DSN
Olaf Helper
Hi Olaf Helper,
I don't now how to add a DSN for the Access Database using ODBC Admin. Can you Please help me with that one. as the solution to above problem i Have added a startup parameter -g512 to SQL Server is it effects my existing Assemblies in SQL Server. I am replacing
the startup parameter as -g500 to -g512 here.
Thank you
Regards,
AyubKhan M

Can we access two different Siebel BO in Same OPA Rule Base

Hi all,
can we access two different BO's from same rule base.
what i means is,can we pass siebel data to OPA Rule Base from two different BO's .
Thank you for your help in advance.

There are two approaches to do this and they both involve making some small changes on the Siebel side.
You can create an Integration Object which contains all the business components that you want to send to OPA if you are using an Integration Object mapping.
If you would prefer to use a Business Object mapping then you will have to create a new Business Object which combines the BCs of all the Business Objects that you want to send to OPA.
As you can see, although one approach involves Integration Objects and one involves Business Objects they both work by creating a single object which is an amalgamation of the information that you want to send to OPA.
Cheers
Frank

How to transfer data between different nodes of the same context.

Hi experts,
I am working on an application in ABAP webdynpro in which i want to copy data from one node to another node in the same context of a view and both the nodes are mapped with different nodes of context of component controller. How to code this. Please help.
Thanks and Regards.
Vaibhav Tiwari.

Hi Vaibhav,
you are in the wrong forum.
BTW: Copying value of nodes is done automaticcally if you connect the nodes.
Regards Mario

Can I access two different libraries on the same computer with the remote app?

I am in the process of upgrading our home network. There is going to be an airport express in each of the main rooms of our house all running to a switch connected to our AirPort Extreme. The reason for this is so we can stream our music in any or all of the rooms we choose. I'm going to have a Windows 7 PC running iTunes constantly also connected so that we will have access to the entire library on any of our devices. My entire library will be housed on an external hard drive that will be connected to the Extreme. Here is where it gets tricky. My wife has a separate library that we want to have access to as well. It is going to be housed on a separate external hard drive connected to the Extreme via a USB hub. I don't want to combine our libraries because hers is absolute chaos and mine is very well organized. Without having to have a second computer running iTunes constantly, is there a way we can access both libraries simultaneously with the remote app? Either by running two instances of iTunes on one computer or some other way I'm not realizing. As it works right now, if we're both running iTunes on our laptops, then I can go onto my iPad and see both full libraries on the remote app. I want to do that, but with just one computer.

I doubt it is possible to run two instances of iTunes on the computer at the same time. To do so would require two users to be signed in and running iTunes under each user.
The better solution would be to either clean up and merge the two libraries or have iTunes running on a second computer.

Different application but with same context root

hi all,
I have two applications www.a.com and www.b.com deployed on two separate oc4j instances, both of the context root are also set to "/". But i found that only the www.b.com is correct, when i goto www.a.com, it will goto the page of www.b.com. How can i make the right cofiguration? I'm using oracle 10g AS (ver. 10.1.2.0.2).
I have search around the forum and seems no one have similar question, can anyone answer me this newbie question. Thanks alot.

thanks for your reply.....i'm a newbie on the oracle AS.. let me elaborate more on my situation...
I'm using oracle http server, and i have setup 2 virtual hosts (one is for www.a.com, and the other is www.b.com) as following:
<VirtualHost default:80>
ServerName www.a.com
DirectoryIndex index.html
DocumentRoot "C:\OraHome_1\j2ee\test1\applications\App1"
</VirtualHost>
<VirtualHost default:80>
ServerName www.b.com
DirectoryIndex index.html
DocumentRoot "C:\OraHome_1\j2ee\test2\applications\App2"
</VirtualHost>
At the AS, i created 2 oc4j instances which is testInstance1 and testInstance2. And then i deployed my two applications to the instance separately, but the context root are also set to "/". After that, i found that in the mod_oc4j.conf, it shows the following statement in it:
Oc4jMount / testInstance1
Oc4jMount /* testInstance1
Oc4jMount / testInstance2
Oc4jMount /* testInstance2
i hope that is clear enough now for you to solve my problem. If not, please let me know... thanks.

Hyper V internal network no ping between real and virtual server

Hi
I have a 2012 server with a static 192.168.1.102 ip address and a 255.255.255.0 subnetmask. This server can be pinged by other servers.
On this server I have Hyper V installed, and configured a virtual
internal network switch.
In Hyper V, I installed a 2012 server, using the virtual internal network switch, with the static 192.168.1.111 ip address and 255.255.255.0 subnetmask. The virtual server can ping other virtual computers using the same virtual internal network switch.
However, the host server can't ping the virtual server and vice versa. What am I doing wrong? I there something else that needs to be configured?

Hi,
If you want to connected your guest vm and your host you must setting this vms to the same virtual switch and at the same subnet, the Hyper-V internal virtual switch can't connect the host directly.
More information:
Hyper-V: What are the uses for different types of virtual networks?
http://blogs.technet.com/b/jhoward/archive/2008/06/17/hyper-v-what-are-the-uses-for-different-types-of-virtual-networks.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SJSAS 8.0.0_01 - Virtual-server/http-listener

Hi!
I want to set up three domains to be mapped to three different webapps on the same physical server. Since every HTTP-listener belongs to one virtual-server and there can't be two listener for the same port, how can I set up three different listener using the same port and different virtual servers?
A different problem: Why can't I choose a webapp that is deployed within a Enterprise Application to be the default webapp of a virtual server?
Thanks in advance,
Christoph

Hi David!
Thank you again for answering, I very much appreciate your help.
No, there is no listener interferring on the same port, that is for sure. Actually, you can't even create a listener for a taken port.
Unfortunately I can't edit the router configuration, but that's a different problem.
Here's an extract of the listener/virtual server configuration of my domain.xml, perhaps someone can see my mistake.
This is how I tried to set up the port 8008 for two different domains to different webapps ( which gave me a adress-is-already-in-use(8008)-error):
<http-listener acceptor-threads="1" address="0.0.0.0" default-virtual-server="csde" enabled="true" id="http-listener-x" port="8008" security-enabled="false" server-name="" xpowered-by="true"/>
<virtual-server default-web-module="csweb" hosts="csde" http-listeners="http-listener-x" id="csde" state="on">
<property name="docroot" value="${com.sun.aas.instanceRoot}/docroot"/>
<property name="accesslog" value="${com.sun.aas.instanceRoot}/logs/access"/>
</virtual-server>
<virtual-server default-web-module="adminapp" hosts="cscom" http-listeners="http-listener-x" id="cscom" state="on">
<property name="docroot" value="${com.sun.aas.instanceRoot}/docroot"/>
<property name="accesslog" value="${com.sun.aas.instanceRoot}/logs/access"/>
</virtual-server>
Thanks in advance for any suggestion,
Christoph

Distiller 8 Server issue on a Virtual Server

We had distiller Server V8 running on a windows 2003 3 server and had no known problems. We had that server virtualized and we are beginning to see an issue and wonder if it is related. We have multiple watched folders receiving .ps files from two different sources. We are seeing files from one one "in" source being distilled into the "out" folder of the other source, renamed the name of one of the files that should be in the other source.
To explain..file named "a1.ps" from source "a", place in the "a" in folder is being renamed file "B1" and showing up in the "B" out folder.
Is there an issue with Distiller Server 8 running on a Virtualized Server?

HI,
Oracle is provided two documents for OAS install in Solaris (32bit and 64bit).
Here I am providing both documents.
http://docs.oracle.com/cd/B31017_01/solx86.1013/install.pdf --- Oracle app server install 32bit
http://docs.oracle.com/cd/B31017_01/sol.1013/install.pdf -- orcle app server install 64bit
Award points it is useful.
Thanks,
satya

Connection to a virtual server

Before I start I know this is really a dumb post so if its too dumb just stop reading and go elsewhere.
I am just having a slight issue with connecting my coldfusion server that resides on my virtual server which my local box host.
I will google this but I am really having a real difficult time making a connection.
Thankjs for the time.

Hi,
To allow the Disk Management snap-in to administer Server Core remotely, perform the following steps:
1. Enable the Remote Volume Management rule group in Windows Firewall on your Server Core installation.
2. Start the Virtual Disk Service (VDS) by typing sc start vds at the command prompt.
You can also type: sc config vds start= auto to configure the service to start automatically each time the computer boots.
Then ran the following command on the core server
netsh advfirewall firewall set rule group="Remote Service Management" new enable=yes
--ran the following command on the Win7 machine
cmdkey /add:<Server name> /user:Administrator /pass:<Password>
The related KB:
Using MMC Snap-ins and RSAT
http://technet.microsoft.com/en-us/library/dd163507.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

File system error while creating a virtual server

Hi
I get the following error when I create a virtual server:
File System Error: Could not create directory /opt/SUNWwbsvr/https-web-content (permission denied)
The admin server is owned by root but the instance that I want to create should be owned by webservd - like the other instance that is installed.
this error shows that web server is unable to create a directory under SUNWwbsvr folder. Any hints pls?
thanks!

sorry this error is while creating a new server instance - not a new virtual server.
File System Error: Could not create directory /opt/SUNWwbsvr/https-web-content (permission denied)

Error while creating virtual server in sunone web server 6.1

I created virtual server class called vs1 and virtual server called vsr1 under it. I deleted them . now while i am trying to create another virtual server class by setting lisener socket and giving it a name. when i create virtual server class and click ok and then apply to apply changes it gives me error with message:
File System error: can not open file for reading
c:/iPlanet/Servers/myservername/[email protected]
What's the solution ?
Thanks in Advance,

Hi..
Thanks for your reply...
Executed following command in OVS server..Please find the output of that command..
[root@IRIMSOVM utils]# ./do_rpc.py https://oracle:[email protected]:8899 echo hello
echo ['hello'] =>
success:echo=hello
[root@IRIMSOVM utils]#
Thanks...
YJR

Shared Objects Accessed by different SWFs

Hi Everyone,
Just wondering how I can make a shared object be able to be accessed by different SWFs on the same server.
Thanks.

Like this? SharedObject.getLocal("status", "/");

After updating to snow leopard server i can't find DHCP server settings

Hi, where are the DHCP server settings on Lion server, i cant find them anywhere, i need DHCP in my network.
Please help

Have you downloaded Server Admin Tools for Lion Server? (This is different than Server.app).
The link is here.

Need to create a virtual server and give its access to another admin

Dear Sir,
I am a new admin and have 5 Blade server "HP ProLiant BL660c Gen8".
I access these servers through HP enclosure.
I have to install Hyper-V on server 1 which consisted of the OS windows server 2012 R2 Datacenter edition.
I created a plan to create 5 Hyper-V VM's on the physical server and I requested the IT department network Admin that I want these 5 VM's to able to connect to each other.
The network Admin created a Trunking configuration on the physical server and after this setup he provided me Hyper-v node IP address and 5 more IP addresses for the 5 Hyper-v VM's.
Now it was left to me to Add the Hyper-v role and create 5 VM's.
While Adding the Hyper-V role, I was asked in the middle of the setup to add the network adapter for
connecting to external network.
I went inside the network connection settings and I see one network adapter "Microsoft Multiplexer"
which had the IP address of the Hyper-V node which was given to be me by Network Admin.
Besides this I found following Network Adapter: (Mgmt,Trunk):(Mgmt A, Trunk A);(Mgmt B, Trunk B) =Total
6 Network Adapter out of which only "Mgmt" was configured with the IP address of the Hyper-v node given by my Network Admin. Remaining all other Network adapters IPV4 configuration
was unchecked except "Mgmt"
So I selected the "Mgmt" connection while Installing the Hyper-v role
SO I chose this Network connection for adding the Hyper-V role.
My question: Did I chose the correct Network Adapter.
After doing this I created a VM-1 and tried to assign the IP address given by the Network Admin. But the network Admin did not provide me the default gateway so I used the deafult gateway according to the IP address and used the last digit as "1"
like a general installation.
Now my question is: 1.How can I use this VM to be used as a Virtual server?
2. I would like to open this VM through my browser by entering the IP address of this VM-1. How can I do this?
Because I access my physical server through the IP address. SO in the similar way I want to access this VM-1 through the IP address
OR is there any alternate way to access this VM-1 separately.
My Requirement: I need to give VM-1 access to another admin to Install his application on it. SO how to give him to access this VM directly?
This is my main query.
Waiting for your reply.
Thanks & Regards,
Ahmed

Jawin, Jacob, etc.. are fine for creating COM clients but COM servers is a totally different story. I suspect you'll either have to write your own JNI or get out your C/C++ compiler.

Real server to access a different Virtual server in same context ??

Similar Messages

Maybe you are looking for