IOS Default.png and the 6sec Black Screen

Greetings fellow scripters!
I'm at the 99% point with my app and have hit this terrible final snag. Everything runs great. Art looks crisp, sound is a nice fidelity, and the whole app is only 32mb in its .ipa form. This is all fine, but I can't seem to get rid of this long black screen.
The Default.png loads and unloads in less than a second, then there is a long awkward pause before the .swf finally adds to the display list.
Things I've tried:
-Using a tiny loader .swf and loading in the big .swf. Much of it contains AS, so it just loads in the stage and bugs.
-Optimization. I brought it from 112 to 32mb, and that's the best I can do without losing too much quality.
-The iPad simulator. It loads fine there. Loader class works and everything.
I'm surprised that I haven't seen tons of people complaining about this, but I'm definitely open to the possibility that I'm doing something weird. If anyone has overcome this hurdle and would like to offer some expert advice, I would be greatful.
Thanks!
Blake

I tried that and had no luck. I've even tried having no code running or symbols loaded and putting a different stage color to check when the loading is complete. I get the same 6 second load followed by the stage color showing. So it definitely seems it is just the loading of the .swf that is causing this long pause.
Has anyone successfully published an iPad app that did not have the long black pause?

Similar Messages

27" iMac, ATI 5750, Bootcamp3.2 and the occasional black screen with XP SP3

Wanted to share my experience with the subject setup and potentially save somebody a lot of time and frustration. My installation would occasionally work. Sometimes it would boot into a black screen and sometimes it would work perfectly. I tried a lot things:
1. Deleting the bootcamp partition and clean install.
2. Renaming AppleHFS.sys, etc to *.old.
3. Downloading and installing some mobility graphic drivers from downloadatoz.com.
4. Downloading and installing the desktop graphic drivers from amd.
5. Using 7zip to unzip the bootcamp3.2.exe file and manually extracting and installing the graphic drivers.
6. Following the directions from Apple support article TS3173.
Everytime I thought it was fixed, the black screen would appear again. One of the comments I read on the forums really struck a chord with me. "XP is getting long in the tooth." So, I ditched my XP SP3 disc and bought an OEM, 64-bit disc of Win7 Professional. So far, this has worked perfectly with absolutely NO black screens (even during installation) on my 27" iMac with the ATI 5750 graphics card.
Message was edited by: rc_sportpilot
Message was edited by: rc_sportpilot

So, a little update on the situation...
I tried repairing the WinXP installation from the install CD and it did not solve the problem.
Right now I'm trying to completely reinstall Windows XP (SP2 this time) and the Apple drivers to see where the problems start to appear (at WinXP SP2 install, at the SP3 install, at BootCamp 2.1 install,...)
Also, something quite important I forgot to mention in my first post is that the problem appeared after cloning the BootCamp partition from another Mac (iMac 20" Alum) using Mike Bombich's NetRestore tool.
If you have any suggestions, I would really appreciate it!
thanks

When I power up my 2008 Mac Pro I get the "welcome", chime, fan goes on, a light goes on on my Apple monitor and then nothing - black screen. Whats going on?

When I power up my 2008 Mac Pro I get the "welcome chime", fan comes on, a light comes on on my Apple moniter and then nothing - black screen. What,s going on?

what you describe as the "welcome chime" is the indicator that your Mac has passed the Power-On Self test, and if a suitable source of software can be found, booting is likely.
If the screen stays dark, the most likely explanation is a graphics card failure. But it could also be caused by a backlight failure in the LCD, so be sure you try shining a bright light at the screen to be check whether the picture is there, but just not illuminated.
Graphics card failure will end the boot-up process in some cases, and not have an impact in others. Two external indications you can use when your display is not working are: The Caps Lock key, which is under the control of Mac OS X, and the Control-Eject dialog box shown below. Note that the default is Shutdown, so a Mac that shuts down in response to Control-Eject followed by Return is working fine.

HT4623 after the ios 7.0 update my iphone 4s and ipad keep switching in between the home screen and the apple loading screen, can anybody help?

Can anybody help with the above?
i.e
both my iphone 4s and ipad switch in between the home screen and the apple loading screen
Many thanks

I would connect each device to a power source, and then reset them by holding the power button and the home button until they turn off.
If it keeps happening, I would put the devices in recovery mode and restore them with iTunes.
This article will help with that if needed:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808

HT4623 i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??

i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
But... if the Device has been Modified... this will Not necessarily work.

IOS 8.3 and the auto rotation of the screen problem?

I upgraded to IOS 8.3 and the auto rotation of the screen has stopped working on my iPad Air 2, has anyone else got this problem?

By Control Centre I meant swipe up from the bottom of the screen to bring up Control Centre. In there you will find the rotation lock symbol (a padlock with a circular arrow round it). Make sure that is turned OFF

Hello! I want to sell my iphone 3g because i have 3gs- i cleared the info in settings and now have black screen saying no service and usb port pointing to itunes - is that all i do ?

Hello! I want to sell my iphone 3g because i have 3gs- i cleared the info in settings and now have black screen saying no service and usb port pointing to itunes - is that all i do ? i am pretty ignorant of computers- lol- i had read that i need to plug it back into itunes to verify it has all cleared out- i want to sell it on craigs list or ebay- i am really hurting for money right now- all your answers appreciated...

It needs to be restored by someone. You can do it, and set it up as a new phone, or the buyer can do it.

My iphone 5c went black screen and it still can cut on and off and it went black screen when i was on facetime with a friend and could still talk to them perfectly fine what is the cheapest way to get it fixed or can i fix it myself without any money

My iphone 5c went black screen and it still can cut on and off and it went black screen when i was on facetime with a friend and could still talk to them perfectly fine. What is the cheapest way to get it fixed or can i fix it myself without any money? I also didnt have the chance to back up my data because it went black screen out of now where.

If your phone is not covered by the warranty anymore, Apple will replace it for a new device, same model and size, if you are willing to pay the service fee.
If you decide to get a 3rd party company to do the repair, Apple will not service your phone anymore after that.
Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions
Model
Out-of-warranty service fee
Battery service*
iPhone 6 Plus
$329
$79
*available only if battery
fails Apple’s diagnostic test
iPhone 6
$299
iPhone 5s, iPhone 5c, iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS, iPhone 3G,
Original iPhone
$149
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
copied from Apple - Support - Service Answer Center

I upgraded my iPhone 4 to ios 7.4 and the screen stopped working i can not use the phone How to fix it ?.

I upgraded my iPhone 4 to ios 7.4 and the screen stopped working i can not use the phone How to fix it ?.

Hold the HOME and SLEEP buttons at the same time until an Apple logo appears. If nothing has happened after holding for 30 seconds charge the phone for 15 minutes with the wall adapter and try again.

So, after my iPod touch died, i plugged it into the computer to try and charge it, and now it keeps changing between the charging screen, the apple logo, and a blank black screen, still hasn't charged, and its been plugged in for almost an hour now

So, after my iPod touch died, i plugged it into the computer to try and charge it, and now it keeps changing between the charging screen, the apple logo, and a blank black screen, still hasn't charged, and its been plugged in for almost an hour now

See the not-charging topic of:
iPod touch: Hardware troubleshooting
Have you tried another cable?
Another charging source? Does iTunes see the iPod when you connect to your computer?
Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and cracked or broken plastic.
- An appointment at the Genius Bar of an Apple store might be in order

After the Firefox update this week (Sept 7?) links from emails won't open. I get an error message. So I've temporarily set IE as my default browser, and the links work.

After the Firefox update this week (Sept 7?) links from emails won't open. I get an error message. So I've temporarily set IE as my default browser, and the links work.

Hi everyone, I have Snow Leopard 10.6.8. I have been very very frustrated by this problem. [I could not create new windows, and anything that opens new windows, such as trying to see what Add-ons you have etc would not work]. I read about changing screen alignment to the top... I have one screen so the option does not exist. The above messages would not fix this problem. I searched hard and did find a solution in the end. I read stuff about removing Add-ons until the problem is fixed, but its simply not the case.
First of all open Firefox. next go to options: Help --- 'Restart with Add-ons disabled'. Tick the box for add-ons, restart firefox. Next go to Tools --- Add-ons. Next (In the Add-ons Manager' click on 'Plugins' on the left hand side pane. Look for the small blue writing that says 'Check to see if your plugins are up to date'.
Now notice it should say 'Missing Flash'. "For your safety, Firefox has disabled your outdated version of Flash. Please upgrade to the latest version". I followed this, reinstalled Flash and it now works as it always did, no problems. For people where the above fix didn't work, try this one out. Hope it helps people!
:o)

I have macbook pro 13.3 inch. I am installing window 7 in boot camp manager after copying file of window upto 67% it doesn't response and i had forcely shotdown my macbook. Now my macbook doesn't open and stop in black screen with cursor blinking.

i have macbook pro 13.3 inch. I am installing window 7 in boot camp manager after copying file of window upto 67% it doesn't response and i had forcely shotdown my macbook. Now my macbook doesn't open and stop in black screen with cursor blinking. Now how could i open my macbook pro.

At startup hold down the Option/Alt key and from the screen that comes up select your OS X partition to start the computer from. Then use the Boot Camp Assistant app to Remove Windows and the partition you reated for it and it will Automatically place the space you allocated for the Windows install back into the OS X partition.
NOTE:
Do NOT use Disk Utility to erase the partition that was created for the Windows install. Use the Boot Camp Assistant app again to do that.

The battery of my iPad four drawn very fast after update to iOS 8.1 and the sensitivity of my iPad decrease until I cannot swipe it and is very lag please fix it immediately

The battery of my iPad four drawn very fast after update to iOS 8.1 and the sensitivity of my iPad decrease until I cannot swipe it and is very lag >< please fix it immediately

Hello alicelan,
After reviewing your post, I have located an article that can help with device errors. You may want to consider restoring your device to factory settings to resolve the issues you've described:
Use iTunes to restore your iOS device to factory settings
Restoring iOS software deletes all your data and content from your device, including songs, videos, contacts, photos, and calendar info.
Before you restore your device
Make sure you’re using the latest version of iTunes.
Use iTunes to back up your device. Transfer and sync any additional content to your computer.
Turn off Find My iPhone in Settings > iCloud on your device to disable Activation Lock.
Restore your iOS device
Connect your iOS device to your computer using the cable that came with it.
Select your iPhone, iPad, or iPod touch when it appears in iTunes. In the Summary panel, click Restore.
Click Restore again to confirm that you want to restore your device to factory settings and delete all data and content. iTunes will download the iOS software file and restore your iOS device.
After your iOS device is restored to factory settings, it will restart. Once it does, you’ll see the "Slide to set up” welcome screen. Follow the steps in the iOS Setup Assistant. You can set up your device as new or using a previous backup. If your iOS device has cellular service, it will activate after you restore.
Learn more
If you get an error message, find out how to fix most update and restore errors.
If your iOS device with cellular service doesn’t activate after restoring, find out how to fix activation issues.
If your iOS device restarts repeatedly or isn’t responding, for example if you see a stopped progress bar or no progress bar, put the device into recovery mode and restore it again.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

PowerBook G4 - Won't Start Up - 3 Strange Beeps then just LED flashes and sudden death - black screen.

PowerBook G4 - Won't Start Up - 3 Strange Beeps then just LED flashes and sudden death - black screen.
Prior that the powerbook also couldn't start but I could see the Apple logo, so via fire-wire (holding T at start up) I backed up the hard disk.
Check via DiskToolPro the structure, defragmented. Via DiskWarrior rebuild the directory
and finally not been able to access the drive I reformatted the drive via fire-wire drive.
Re-started the powerbook holding C to boot up from DVD - nothing
Re-started again and it give me one long beep and black screen. An indication that my 1gig RAM is bad or gone (?) and the DVD is stuck inside.
Bought new one 1 gig, installed it and now I'm getting only three beeps.
I tried all, changed the slots several times and nothing.
I tried more as:
                         c -- to boot from CD (again while the DVD is still inside and I cannot get it out)
                         cmd-opt-p-r -- to Zap the PRAM,
                         cmd-opt-n-v -- to clear NV RAM,
                         cmd-opt-o-f -- to boot into open firmware … and nothing. The DVD is in and I have
                                                black screen with three beeps and flashing LED.
Do I have to replace the Logic Board?   (Anyone has a spare one ?)
But it is the faulty Logic board?
Could anyone help me out? Please.
I'm retired and I cannot afford a new laptop - and this powerbook was a great, great horse for me until that horrible set of three beeps.
Thank you in advance for any advice and help.
Martin
THE SPECS OF MY POWERBOOK:
Model Family:
Powerbook G4 Aluminum
Processor:
1.67GHz G4 (PowerPC 7457B)
Manufacturer:
Motorola
# of CPUs:
1
Codename:
Apollo 7
Display:
Size:
15.2"
Finish:
Matte
Resolution:
1280x854
Backlight:
CCFL
Base Memory:
1gig PC2700 SODIMM
Brand:
Apple
Wireless:
802.11b/g
Color(s):
Aluminum
Original OS:
Mac OS X 10.6.3
Battery:
50-watt-hour removable lithium-ion battery
Graphics:
ATI Mobility Radeon 9700 (64MB)
Base Storage:
80GB 5400RPM EIDE 2.5"
Optical Drive:
8x Superdrive
Model Number:
A1106
Sales Number(s):
M9677LL/A
Machine Number(s):
PowerBook5,6
Dimensions:
13.7 in x 9.5 in x 1.1 in
Weight:
5.6 lb
Production:
Jan 31, 2005 - Oct 19, 2005
Factory:
China
Production Year:
2005
Production Week:
35 (September)
Production Number:
4240

But it is the faulty Logic board?
There was a known issue with LBs in 15-inch PowerBooks with 1.5 and 1.67Ghz processors in which one RAM slot would fail. There once was a repair extension program that fixed the problem at no cost, but it is long-expired.
The problem with seeking a used logic board for these models is that so many had their boards replaced that it increases the chances of the boards in the used/pulled markets having the same problem you have now. The replacement program also came close to exhausting the supply of new boards,
If it turns out to be a bad LB and you can't find a replacement, consider how used computer pricing works: A used computer is worth hugely more in parts than if bought as a working unit. I.E, you can probably find a working PowerBook that will cost less than the logic bard alone. It also possible to find a used MacBook Pro for less that a replacement LB.
If you tell us your approximate geographic location, we can see what's available nearby. I'm also retired, and and visiting my wife's family this week so have even more time than usual to help you search.
Regards,
Allan Jones

My ipod touch was with the total black screen

mine ipod touch was with the total black screen, and itunes does not recognize it you not binding

Try holding down the on/off and home buttons at the same time until you see the Apple logo.

IOS Default.png and the 6sec Black Screen

Similar Messages

Maybe you are looking for