IOS that supports SSH

Hi guys,
I am using L3 4506 switch with the IOS Version 12.2(18)EW3. I want to upgrade the IOS which supports SSH. Can any one suggest the latest IOS version that supports SSH for 4506 switch.
Thanks
Rajesh

Thanks Prame...
The Supervisor Engine that we have is Supervisor IV.
For your better understanding i have attached the output below.
Switch#sh ver
Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12.2(18)EW3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Mon 07-Feb-05 19:21 by hqluong
Image text-base: 0x00000000, data-base: 0x010BFA78
ROM: 12.2(20r)EW1
Dagobah Revision 95, Swamp Revision 29
swsyd0501 uptime is 2 hours, 47 minutes
System returned to ROM by reload
System image file is "bootflash:"
cisco WS-C4506 (MPC8245) processor (revision 7) with 524288K bytes of memory.
Processor board ID FOX094203G6
Last reset from Reload
8 Virtual Ethernet/IEEE 802.3 interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
56 Gigabit Ethernet/IEEE 802.3 interface(s)
403K bytes of non-volatile configuration memory.
Configuration register is 0x2101
I think this will help to suggest me for a better IOS version which support SSH.
Thanks
Rajesh

Similar Messages

Ios image support ssh

hello dear
please can you tell me that the image ((c2960-lanbase-mz.122-53.SE1.bin)) support the ssh or no??
if no what ios image can i load for the switch 2960G to support the ssh.
thanks

Hello sajjad_m1987,
c2960-lanbase-mz.122-53.SE1.bin does not support ssh.
You'll need the crypto image, which has the k9 in the name.
c2960-lanbasek9-mz.122-52.SE.bin
You can go to the following link to search for the ios that supports the feature that is needed.
http://tools.cisco.com/ITDIT/CFN/jsp/by-feature-technology.jsp
Hope this helps,
if so, please rate.

Best current IOS that supports Netflow in a 6509?

Hello,
We are trying to enable Netflow in our core switches (6509E). The problem that we have is that once we enable it the CPU usage is noticeable higher and I've been thinking it could be IOS related. Does anyone have a recommendation of an IOS that provides good performance when Netflow is enabled?
Thank you,
Francisco.

We have:
(s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(33)SXJ
Netflow is disabled and we do not want to enable it since we saw some performance issues and we were told not to enable it again. At some point we will need to enable it, that is why i am thinking there might be a better supportive IOS version for Netflow.
We have a WS-C6509-E (R7000) processor (revision 1.2) with 983008K/65536K bytes of memory

Downgraded A1240 Access point to IOS that support CLI command

I have a new A1240 and it IOS is working with new command LWAPP and need a control server to manage the access point. It (ios) does not have configure terminal command. I think I can delete the IOS in the flash and load a older version IOS. I went ahead and deleted the IOS and assumed the access point will go to rommon mode and allows me to archive a tar file (older ios) into the access point. However, I only get AP: prompt and stuck here. I can not run copy or archive command. What are recover process. Need your expert guidance. Au Ray Singapore

Hi Au Ray,
Have you tried this method?
Using the MODE button
You can use the MODE button on 1100 and 1200 series access points to reload the access point image file from an active Trivial File Transfer Protocol (TFTP) server on your network or on a PC connected to the access point Ethernet port.
This process resets all configuration settings to factory defaults, including passwords, WEP keys, the access point IP address, and SSIDs.
Follow these steps to reload the access point image file:
Step 1 The PC you intend to use must be configured with a static IP address in the range of 10.0.0.2 to 10.0.0.30.
Step 2 Make sure that the PC contains the access point image file (such as c1100-k9w7-tar.122-13.JA.tar for an 1100 series access point or c1200-k9w7-tar.122-13.JA.tar for a 1200 series access point) in the TFTP server folder and that the TFTP server is activated. For additional information, refer to the "Obtaining the Access Point Image File" and "Obtaining TFTP Server Software" sections.
Step 3 Rename the access point image file in the TFTP server folder to c1100-k9w7-tar.default for an 1100 series access point or c1200-k9w7-tar.default for a 1200 series access point.
Step 4 Connect the PC to the access point using a Category 5 (CAT5) Ethernet cable.
Step 5 Disconnect power (the power jack for external power or the Ethernet cable for in-line power) from the access point.
Step 6 Press and hold the MODE button while you reconnect power to the access point.
Step 7 Hold the MODE button until the status LED turns red (approximately 20 to 30 seconds), and release the MODE button.
Step 8 Wait until the access point reboots as indicated by all LEDs turning green followed by the Status LED blinking green.
Step 9 After the access point reboots, you must reconfigure the access point by using the Web-browser interface or the CLI.
From this doc;
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a00801d0188.html#wp1040300
Hope this helps!
Rob

C3560 that supports crypto for remote acess

I have a question WS-C3560-8PC-S that supports ssh remotely to do?

supports the WS-C3560-8PC-S crypto functions?

Small, cheap NAS box that supports nfs/rsync/ssh ?

Hi all,
for my personal backup needs, I'm looking for a standalone NAS box ("networked hard disk/raid solution"). I need to have support for at least one of rsync/nfs/ssh. (smb/ftp is not enough for me)
It shouldn't be too big (eg not the size of a regular pc.) and it shouldn't cost more then 350 euro or so without disks.
If I can mount one or two sata 1TB disks I'm happy.
Bonus points for solutions where I have total control over the "OS" on it, where the hardware platform exists of standardized easily replacable parts and if it's powerfull enough to do encryption. (I'm prepared to throw in extra cash for these features)
I guess my options are:
1) a product that supports what I want out of the box. I couldn't find that (unless ridiculously expensive, eg 500 euro or more without disks)
2) a product that *almost* does what I want, but where you can install a small Linux distro/freenas over the original firmware so you can do what you want. Basically any appliance (be it a storage device, embedded platforms, network equipment, ...) that can host hard disks and where you can overwrite the OS is worth looking into.
3) building something myself. I've seen some really small motherboards based on Atom cpu's, or even embedded stuff can be enough (something like soekris, pc-engines, etc). But it needs 2 sata ports then, I need to find a housing, a psu, etc. SFF-pc's such as shuttle's etc can also be good options
Any tips, pointers, ideas ?
Thanks
UPDATE:
Here is a list of some devices/urls/thoughts/questions I'm working on. Work in progress! I'll update.
Interesting url's
http://www.hardware.info/nl-NL/productd … S_devices/ off-the-shelf-nas
http://www.mini-itx.com/ all stuff mini-ITX
http://www.epiacenter.com all stuff epia
http://www.logicsupply.com/ mini-itx and SFF resource
http://www.logicsupply.com/matrix/mainboard mainboard matrix
http://www.mini-itx.com/reviews/atoms/ review of 5 Atom mini-itx boards with power comparison between the 2 intel chipsets
http://resources.mini-box.com/online/po … lator.html power calculator (not prepared for Atom though)
http://forums.vr-zone.com/showthread.php?t=275906 power comparison atom vs C2D
Chipsets
TDP's taken from http://download.intel.com/design/proces … 309219.pdf page 399, http://ark.intel.com/chipset.aspx?familyID=28994
type - TDP - usage - url
945 GM /GME express - 7 - used with atoms? - http://www.intel.com/products/notebook/ … erview.htm
945 GMS/GSE express - 6 - used on some atom boards who are not available yet (eg the MSI 9830/9832) - http://www.intel.com/design/chipsets/em … /index.htm
945 GC - 22.2 - used on nearly all current atom boards - http://ark.intel.com/chipset.aspx?familyID=28994
945 PM express - 6 - ?
943 GML express - 7 - ?
940 GML express - 7 - ?
945 GT express - 15 - ?
ultra mobile 945GU express - 5 - ?
G45 - 24 - "rich media" socket 775 boards - http://www.intel.com/Assets/PDF/designguide/319972.pdf
Q45 - 17 - "business" socket 775 boards - http://www.intel.com/Assets/PDF/designguide/319972.pdf
P45 - 22 - ?? - http://www.intel.com/Assets/PDF/designguide/319972.pdf
TDP's of complete systems
type - TDP idle - TDP loaded cpu - TDP loaded cpu+video - source url
945 GSE setup without HDD - 15 - 17 - ? - http://www.mini-itx.com/reviews/atoms/
945 GC setup without HDD - 25 - 27 - ? - http://www.mini-itx.com/reviews/atoms/
945 GC (and ich7) full setup - 27 - 31 - 38 - http://www.silentpcreview.com/article865-page5.html
G45 Express + C2D E6400 65nm full setup - 49 - 97 - 98 - http://www.silentpcreview.com/article869-page5.html
G45 Express + C2D E7200 45nm full setup - 35 - 64 - 65 - http://www.silentpcreview.com/article869-page5.html
Off-the-shelf NAS
* LaCie Ethernet Disk mini: needs to connect to internet to activate? or is this only for the remote feature? can you run custom OS on it?
* ximeta ndas seems to need special/proprietary drivers/calls to be able to use it?
* linksys nas200
seems pretty customizable. some 3rd party firmwares
http://www.linksysinfo.org/forums/showt … hp?t=60232
http://www.nslu2-linux.org/wiki/NAS200/Hardware
http://www.iomega-europe.com/section?SI … ecid=40380 (nslu2 firmwares)
slow: 3MB/s over 100Mbps
slower then dlink and qnap. see http://www.trustedreviews.com/networkin … -NAS200/p2
* intel SS4000E or something?
* qnap ts-509 or other qnap?
http://www.qnap.com/pro_detail_feature.asp?p_id=86 -> 480euro
http://www.qnap.com/pro_detail_feature.asp?p_id=104 -> 800 euro
* iomega storcenter
* netgear readynas: they have decent pricy ones who are big and consuming as much as an atom based server or something.
they also have smaller ones.:
2disk 310euro
4disk -> 1000 euro
http://www.netgear.nl/producten/product … od=RND2150 -> 300 euro
6disk http://www.netgear.nl/producten/product … d=RNDP6610 -> runs on an intel C2D -> 1500euro
* dlink
* thermaltake muse looks pretty cool http://www.xpcgear.com/n0001lnu.html 390 euro http://tweakers.net/pricewatch/149904/t … -wit).html
* synology has lots of stuff. eg http://www.synology.com/enu/products/CS407/index.php
http://www.synology.com/enu/products/DS207+/index.php -> 285 euro
http://www.synology.com/enu/products/DS408/index.php -> 510+ euro
http://www.synology.com/enu/products/DS508/index.php -> 800+ euro
* hp
http://www.hp.com/united-states/campaig … martserver
DIY-style (TODO: look up motherboards, enclosures, etc) miniITX, arm, via, intel atom,...
* info/tutorials
** http://blogs.sun.com/paulie/entry/zfs_n … _the_intel
** http://www.mashie.org/casemods/udat2.html (note: the 5disks into 3 bays thing is discontinued)
* complete boxes/barebones:
** Asus eeebox: perfect except that it can only contain 1 disk, of the format of 2.5"
** http://www.norcotek.com/DS-520.php 5x hotswap sata. Celeron, 2x Gbps,... looks great although very hard to get in EU apparently + you're bound to custom motherboard etc
** Shuttle XPC X27D dualcore atom, 1x 2.5 hdd. but 645GC http://loveno.be/product/16866
* motherboard/cpu combos
** http://www.via.com.tw/en/products/mainb … ard_id=610 Via C7 1.5Ghz, 4-8x sata, padlock engine, via gigabit controller. CF and miniPCI slot, 1xddr2
** http://www.intel.com/Products/Desktop/M … erview.htm . Atom 230 1.6Ghz. 1x IDE, 2x sata. only 100Mbit/s, 1x PCI, 1xddr2
** MSI MS-9830. fanless. 2x Gigabit. 2x sata. available yet?
** MSI MS-9832. http://www.logicsupply.com/products/ms_9832 2x Gbps, 4x sata. 1x ata. expected 1/20/2008
** Intel D945GCLF2 -> like D945GCLF, but dualcore,Gigabit.
** Intel DG45FC http://www.intel.com/Products/Desktop/M … erview.htm socket775, 4x sata, 2x Gbps,... -> based on intel G45 "media center" chip (eg more media features), but same price as DQ45EK !
** Intel DQ45EK http://support.intel.com/Products/Deskt … erview.htm socket775, 4xsata,Gigabit. -> based on intel Q45 "business" chip. perfect for the chenbro case, except no 5th sata (unless i loop the esata back in) or ide for the 5th 2.5" disk
** http://www.asus.com/products.aspx?l1=3& … odelmenu=1 Similar, but more media-features and 6x sata
** Jetway J7F4K1G5D-PB. Via C7. 2X Gbps, 2x sata 150, 1x ata 100
** Epia SN xx -> various epia boards with 4x sataII
* cases
** http://usa.chenbro.com/corporatesite/pr … ?serno=100 (nice mini ITX server case with 4x hotswap bays and PSU) (just make sure you have good AHCI suppport) 170euro
** http://www.xpcgear.com/pcv350b.html Lian-Li PC-V350B , 2x 5,5", 2x 3.5", microATX
Notes
* I heard via Epia is rather expensive especially for it's quite low performance
* Via nano might be a good platform (must google more for this, stable?)
* There are no Atom boards with more then 2 sata ports. (the msi's still are to be expected)
* Taking an intel board with a slow celeron / amd with sempron can be an option, it will be fast , stable and not expensive. I'm told it wouldn't pull too much power either. (although more then atom/epia)
* "ready-to-go" SFF-pc's/barebones can be found in the <300 euro price range, making this a good target for a simple 1/2-disk NAS
* AHCI problems with AMD/ATI RS400-200, RS480 HBA and Nvidia nForce 560. see http://en.wikipedia.org/wiki/Advanced_H … _Interface
* An intel G45/Q45-based system would be sweet, they have
- http://en.wikipedia.org/wiki/List_of_In … _Factor.29
- http://en.wikipedia.org/wiki/List_of_In … C_45_nm.29
with very low TDP, but they don't fit in socket 775
Last edited by Dieter@be (2009-01-30 10:11:53)

deadrabbit wrote:I recently bought an MSI Wind desktop, with pretty much the same thing in mind. I ended deciding against a NAS enclosure, since I wanted to be able to install a conventional Linux distro, and have complete control over it. The Wind is cheap, and all the hardware is Linux compatible (http://www.newegg.com/Product/Product.a … 6856167032). I ended up installing the OS on a CompactFlash card, so the hard drive would have to run constantly. As a result, it's nice and quite, uses little power, and the OS on the CF card is automatically backed up to the hard drive. I wrote up a detailed description of the project here: http://rockhoppernotes.blogspot.com/200 … sktop.html.
Thanks, looks quite good.
Except one thing: the 945GC chipset has a TDP of 22.2W.. that's stupid imo, and defeats the whole purpose of a low-tdp cpu such as the Atom. Right now I'm still doubting between waiting for an Atom board based on the 945GM(S)/945GSE chip (TDP 6Watt) (eeebox has that one, some MSI mini-ITX boards should be available in january) or going for a socket775 board with an intel core2 45nm cpu, which would consume not much more then Atom+ 945GC chipset (when idle, loaded is much more but I don't plan to load it ).
Nvidia is also working on an Atom chipset but I don't think I'll wait for that.

Apps that support IOS 3.1.3 version ?

Hi,
Can someone help me to find out all the apps/games that support IOS 3.1.3 version from itunes store.
Where can i get them?
Thanks

kiran,
You can't install the newer ios apps since the CPU and internal RAM inside an ipod touch 1G can not support the demands of the newer software. There are still many many many apps available that will work. The trick is finding them.
I wrote "Vintapps 3.1.3" to make this easy for anyone who has this problem due to keeping their devices for years or getting a handme down.
Vintapps info/support: https://www.facebook.com/VintApps313
For a web based method see,
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/finding-a pps-for-older-devices
Although I wrote my 99 cent app specifically to help solve this problem, I need to add that "I may receive some form of compensation, financial or otherwise, from my recommendation or link."
Jim

Which is Adobe product to be used for developing iPAD(IOS) applications that support PDF edit on the

Question:
We would like to know if LiveCycle ES 8.0 supports development of applications for IOS devices like iPAD,...
Our requirement is to build applications that opens PDF on an iPAD, let the user edit and save the PDF.
If not, which other Adobe product does?
Thanks,
Murali

If you want to add text as comments, then a form created in Acrobat (Acroform) will work in Adobe Reader for iOS. It does not support forms created in LiveCycle Designer (XFA). There are also other PDF viewers that support Acroforms and commenting. So you don't need to create an application, just documents (PDF forms) that can be opened in an existing application (PDF viewer) that supports forms and commenting.
If you want to edit/add text that is part of the regular page contents of an existing PDF, I'm not aware of anything on iOS that does that and I don't think Adobe has anything that will help you develop an app that will.

How do I switch to 'fly by' view in iOS 6 Maps in cities that support it?

Curious how to switch to this fly by mode in cities that support it in the new Maps app.
Thanks
Harry

Add your own review to those already there complaining about this:
https://itunes.apple.com/us/book/big-nate-makes-a-splash/id651440000?mt=11
You could also try asking for a refund via the "report a problem" link on your receipt.

IOS version that support 2048 bits certificate

Hello,
I need to update a 2504 Wireless Controller to a version that supports 2048 bits certificates.
I´m checking release notes for release 7.4.110.0 and I don´t see any information about a limitation in certification size (2048 bytes in my case).
Do you know any restriction about the certificate size in this or another version?
Thanks and Regards.
Iván.

2048 bit is supported on the WLC. I use it for WebAuth and 3rd party certificates as these vendors only issue 2048 these days.
Sent from Cisco Technical Support iPhone App

Is this image capable of supporting SSH V2? flash:c2800nm-spservicesk9-mz.124-17a.bin

I ran a batch job on a certain group of routers trying to enable SSH V2 on them, some of them came back successfully and others replied when I ran the command "sh ip ssh" with "SSH Enabled - version 1.99". Even though this is a K9 image, is it only capable of supprting SSH V2 or where might I find a doc which might be able to show me what images are c\apable of supporting ssh v2? Thanks guys

Can I ask, is it a rock solid rule that an image that doesn't contain "K9" in it is incapable of supporting SSH? Also is there a feature navigator tool for hardware devices? That is to say is there a tool out there that will tell me what IOS's a hardware device is capable of running? For example let's say I need to see if a VG 202 is capable of running a K9 image is there a look up tool out there which would help me ascertain this infor mation? I can't seem to find one. Thanks so much for your help so far!

Can you drop iOS 4 support for an app already in the App Store? What iOS version is good to target?

Now that AIR supports the MinimumOSVersion key, apps can set a specific minium version they will support. It wasn't available before, so it ended up in the app store with the default of 4.0.
Any device that AIR supported had to have ARMv7 anyways and I believe all ARMv7 iOS devices can update to at least 5.1.1, so would it be an issue with apple to drop iOS 4 support? Any device that could get the app before can upgrade to iOS 5+ for free to support it.
Only a small portion of people are still running iOS 4, and I get the feeling that most of those are folks with ancient ARMv6 devices that can't upgrade past iOS 4 and could never use the app anyways due to ARMv6. So why bother with testing for iOS 4 and possibly having to give iOS 4 related tech support?
If supporting 5+, is it a good idea to target 5.0 or 5.0.1 or 5.1 or 5.1.1 or what?

Any of the non-user generated resources is in the tmp or Cache folders (which are not backed up) on mine, so that shouldn't be an issue in my case.
I looked at the wiki for iOS 5 and i didn't see any developer-related features other than that 'do not back up' thing that were added between sub-versions of iOS 5, so maybe I should target 5.0?
I'm still wondering, how do you handle dropping older versions of iOS? Surly developers can't be expected to maintain support for discontinued versions of iOS forever just because their app has been around for awhile? Apps eventually need to advance and use new OS features and require performance of current devices. Just set the MinimumOSVersion key to 5.0 or whatever and that's it?

In Exchange server 2007, is syncing notes to iOS device supported?

In Exchange server 2007, is syncing notes to iOS device supported? Specially iPhones, and iPads.
Thanks.

Hi,
Here is an article about how to set up Exchange 2007 on iPhone, iPad and iPod:
http://www.rackspace.com/knowledge_center/article/setting-up-exchange-2007-on-iphone-ipad-ipod-ios-7
When setting up, you can select the services that you wish to sync with the Exchange Server.
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards.

Does 12.1 support ssh in 2950 and 3550

Hi,
We have 2950 and 3550 switches running IOS version 12.1
In this version can we implement ssh access?
Regards
SKRAO

Hi Rao,
The following images support SSH on 2950 24 switches.
12.1(22)EA9
12.1 doesn't support SSH for 3550 24 switches.The following images support SSH on 3550 24 switches.
12.2SEE
12.2SED
12.2SEB
Hope it helps you.
Thanks,
satish

Does 3650 Mgmt Interface (Gi0/0) support SSH ?

Does anyone know if the WS-C3650-48PD supports (or not) SSH over the MGMT interface (Gi0/0) ?
I have it working with Telnet and the switch is configured with SSH enabled.
I can use SSH if I use in-band management (configure the switch IP on a VLAN interface instead of on the Gi0/0 interface), but when I try to open a SSH session over the MGMT interface I get "Connection refused" in my SSH client.
Is there something extra I need to do to make SSH work over MGMT ?
vrf definition Mgmt-vrf
address-family ipv4
exit-address-family
address-family ipv6
exit-address-family
ip ssh time-out 60
ip ssh authentication-retries 5
ip ssh logging events
ip ssh version 2
interface GigabitEthernet0/0
vrf forwarding Mgmt-vrf
ip address 172.28.26.95 255.255.255.0
negotiation auto
ip route vrf Mgmt-vrf 0.0.0.0 0.0.0.0 172.28.26.1
line vty 0 4
access-class 1 in
exec-timeout 50 0
password 7 xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
logging synchronous
login local
length 0
transport input telnet ssh
escape-character 3
Normally I would use "transport input ssh" - ie. no telnet - but this is the only way I've been able to use the MGMT interface so far and I'd rather not be using Telnet at all.
Thanks
David

Quicker than expected - quiet morning so far ;-)
#sh ip ssh
SSH Enabled - version 2.0
Authentication timeout: 60 secs; Authentication retries: 5
Minimum expected Diffie Hellman key size : 1024 bits
IOS Keys in SECSH format(ssh-rsa, base64 encoded):
ssh-rsa xxxxxxxxxxxxxxxxxxxxxxxxxxxxx...
I checked the SSH traffic from my client - I send SYN, get back RST - definitely an active refusal of the connection.
If MGMT Gi0/0 does support SSH, it's clear I'm missing something to enable it.
IOS is Cisco's current recommended for this platform and in the recommended installation mode
Switch Ports Model SW Version SW Image Mode
* 1 52 WS-C3650-48PD 03.03.05SE cat3k_caa-universalk9 INSTALL
If I move the management IP address off Gi0/0 and onto the management VLAN interface (management is then through Gi1/1/1 where the VLAN is trunked), it works fine and I can SSH to the switch with no other changes to the configuration (of course subsequently I want to disable Telnet)
I know can eliminate patching and routing/forwarding of the traffic as issues given Telnet and PING can reach the management IP address under both configurations. It's as if the MGMT interface just doesn't allow SSH by default (or possibly not at all)
If you have a working configuration you'd be happy to share, I'd appreciate it.
Thanks again
David

IOS that supports SSH

Similar Messages

Maybe you are looking for