IOS-XR ping source
I've an issue where the source of my pings from a router are ideally sourced from a loopback.
For many host services the source-interface command can be used to set this. (ftp,tftp,ntp,snmp etc).
However for ping/traceroute , like IOS, no such command exists and it defaults to use the sourceIP of the the interface towards the destination.
In XR though (4.3.0) I'm seeing that specifying the source by interface name seems to take ~15 seconds to resolve ; specifying the loopback's IP is fine.
Sourcing a ping by interface name on a 7600 is immediate.
Ideally ping/traceroute could have a source-interface command as well, but in lieu of that, using the interface name would be easier than looking up the IP every time.
Anyone else seeing this delay with using an interface name?
I found it. The issue was related the the other part of my question.
I had not configured domain lookups to use the loopback as a source. ;-)
Therefore I think the ping command was trying to resolve the interface name via DNS (?).
After configuring the following it's responding much more quickly.
'domain lookup source-interface loop0'
Sure would be nice to collect these source-interface commands within XR as opposed to many one-offs as
well as for enabling to do so for base services like ping/trace as well.
ex.
logging source-interface Loopback0
domain lookup source-interface Loopback0
ftp client source-interface Loopback0
tftp client source-interface Loopback0
snmp-server trap-source Loopback0
ntp
source Loopback0
Similar Messages
-
DNS is waiting for AD to signal the initial replication has completed
Hello,
First off, thank you for your help in advanced. Any help you can offer would be appreciated, and let me know if there's more information you need
me to provide, or utilities to run.
I have just joined a Server 2012 R2 DC to my Server 2008 R2 domain. Topology is it only had one DC previously, the 2008 R2, running AD/DNS/DHCP.
I ran the forest prep & domain prep on the 2008 R2 domain controller, then ran a dcpromo on the 2012 R2. From there, I migrated the FSMO roles over to the 2012 R2 server using ntdsutil.exe. The ultimate goal is to retire the 2008 R2 DC and
bring on line a 2nd 2012 R2 DC for this domain.
My Issues
Windows 7 client PC's do not always resolve/pass traffic to the Server 2012 R2 server, sometimes I need to ping
the server by IP before it will resolve, other times if I just repeatedly double click on the shared folder mapped to the Server 2012 R2 DC it will work eventually. This is intermittent/random,
and not always repeatable with any specific procedures. Sometimes the user will be working, then all of the sudden they can't resolve DNS to the internet, nor internally.
I am getting the following errors in the event log on my 2012 R2 DC
Log Name: DNS Server
Source: Microsoft-Windows-DNS-Server-Service
Date: 3/16/2014 8:02:34 PM
Event ID: 4013
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: HSSserver.carman.local
Description:
The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start
until the initial synchronization is complete because critical DNS data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there
is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet Protocol properties of this computer. This event will
be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 3/16/2014 8:56:17 PM
Event ID: 2092
Task Category: Replication
Level: Warning
Keywords: Classic
User: ANONYMOUS LOGON
Computer: HSSserver.carman.local
Description:
This server is the owner of the following FSMO role, but does not consider it valid. For the partition which contains the FSMO, this server has
not replicated successfully with any of its partners since this server has been restarted. Replication errors are preventing validation of this role.
Operations which require contacting a FSMO operation master will fail until this condition is corrected.
FSMO Role: CN=Partitions,CN=Configuration,DC=carman,DC=local
User Action:
1. Initial synchronization is the first early replications done by a system as it is starting. A failure to initially synchronize may explain why a FSMO role cannot be validated. This process is explained in KB article 305476.
2. This server has one or more replication partners, and replication is failing for all of these partners. Use the command repadmin /showrepl to display the replication errors. Correct the error in question. For example there maybe problems with IP connectivity,
DNS name resolution, or security authentication that are preventing successful replication.
3. In the rare event that all replication partners are expected to be offline (for example, because of maintenance or disaster recovery), you can force the role to be validated. This can be done by using NTDSUTIL.EXE to seize the role to the same server. This
may be done using the steps provided in KB articles 255504 and 324801 on.
The following operations may be impacted:
Schema: You will no longer be able to modify the schema for this forest.
Domain Naming: You will no longer be able to add or remove domains from this forest.
PDC: You will no longer be able to perform primary domain controller operations, such as Group Policy updates and password resets for non-Active Directory Domain Services accounts.
RID: You will not be able to allocation new security identifiers for new user accounts, computer accounts or security groups.
Infrastructure: Cross-domain name references, such as universal group memberships, will not be updated properly if their target object is moved or renamed.
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 3/16/2014 8:56:17 PM
Event ID: 2092
Task Category: Replication
Level: Warning
Keywords: Classic
User: ANONYMOUS LOGON
Computer: HSSserver.carman.local
Description:
This server is the owner of the following FSMO role, but does not consider it valid. For the partition which contains the FSMO, this server has
not replicated successfully with any of its partners since this server has been restarted. Replication errors are preventing validation of this role.
Operations which require contacting a FSMO operation master will fail until this condition is corrected.
FSMO Role: CN=Schema,CN=Configuration,DC=carman,DC=local
User Action:
1. Initial synchronization is the first early replications done by a system as it is starting. A failure to initially synchronize may explain why a FSMO role cannot be validated. This process is explained in KB article 305476.
2. This server has one or more replication partners, and replication is failing for all of these partners. Use the command repadmin /showrepl to display the replication errors. Correct the error in question. For example there maybe problems with IP connectivity,
DNS name resolution, or security authentication that are preventing successful replication.
3. In the rare event that all replication partners are expected to be offline (for example, because of maintenance or disaster recovery), you can force the role to be validated. This can be done by using NTDSUTIL.EXE to seize the role to the same server. This
may be done using the steps provided in KB articles 255504 and 324801 on
The following operations may be impacted:
Schema: You will no longer be able to modify the schema for this forest.
Domain Naming: You will no longer be able to add or remove domains from this forest.
PDC: You will no longer be able to perform primary domain controller operations, such as Group Policy updates and password resets for non-Active Directory Domain Services accounts.
RID: You will not be able to allocation new security identifiers for new user accounts, computer accounts or security groups.
Infrastructure: Cross-domain name references, such as universal group memberships, will not be updated properly if their target object is moved or renamed.
Log Name: DFS Replication
Source: DFSR
Date: 3/16/2014 11:21:43 PM
Event ID: 5014
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: HSSserver.carman.local
Description:
The DFS Replication service is stopping communication with partner CARMANSERVER for replication group Domain System Volume due to an error. The service will retry the connection periodically.
Additional Information:
Error: 1726 (The remote procedure call failed.)
Connection ID: 020D5B10-4876-4888-9214-45E3D8B3206D
Replication Group ID: 8A8ADB84-CB25-495E-8C28-AE9FD1761E85
From the Server 2008 R2 DC, I get the following errors/warnings in my event log:
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 3/16/2014 8:02:45 PM
Event ID: 2088
Task Category: DS RPC Client
Level: Warning
Keywords: Classic
User: ANONYMOUS LOGON
Computer: CARMANSERVER.carman.local
Description:
Active Directory Domain Services could not use DNS to resolve the IP address of the source domain controller listed below. To maintain the consistency of Security groups, group policy,
users and computers and their passwords, Active Directory Domain Services successfully replicated using the NetBIOS or fully qualified computer name of the source domain controller.
Invalid DNS configuration may be affecting other essential operations on member computers, domain controllers or application servers in this Active Directory Domain Services forest,
including logon authentication or access to network resources.
You should immediately resolve this DNS configuration error so that this domain controller can resolve the IP address of the source domain controller using DNS.
Alternate server name:
HSSserver.carman.local
Failing DNS host name:
25346b74-2fc2-4311-a54d-d500669d4026._msdcs.carman.local
NOTE: By default, only up to 10 DNS failures are shown for any given 12 hour period, even if more than 10 failures occur. To log all individual failure events, set the following
diagnostics registry value to 1:
Registry Path:
HKLM\System\CurrentControlSet\Services\NTDS\Diagnostics\22 DS RPC Client
User Action:
1) If the source domain controller is no longer functioning or its operating system has been reinstalled with a different computer name or NTDSDSA object GUID, remove the source
domain controller's metadata with ntdsutil.exe, using the steps outlined in MSKB article 216498.
2) Confirm that the source domain controller is running Active Directory Domain Services and is accessible on the network by typing "net view <DC
name>" or "ping <source DC name>".
3) Verify that the source domain controller is using a valid DNS server for DNS services, and that the source domain controller's host record and CNAME record are correctly registered,
using the DNS Enhanced version of DCDIAG.EXE available on
dcdiag /test:dns
4) Verify that this destination domain controller is using a valid DNS server for DNS services, by running the DNS Enhanced version of DCDIAG.EXE command on the console of the
destination domain controller, as follows:
dcdiag /test:dns
5) For further analysis of DNS error failures see KB 824449:
Additional Data
Error value:
11004 The requested name is valid, but no data of the requested type was found.
Log Name: DNS Server
Source: Microsoft-Windows-DNS-Server-Service
Date: 3/16/2014 8:02:19 PM
Event ID: 4013
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: CARMANSERVER.carman.local
Description:
The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start
until the initial synchronization is complete because critical DNS data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there
is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet Protocol properties of this computer. This event will be
logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
Log Name: System
Source: Microsoft-Windows-DNS-Client
Date: 3/16/2014 8:01:55 PM
Event ID: 1014
Task Category: None
Level: Warning
Keywords:
User: NETWORK SERVICE
Computer: CARMANSERVER.carman.local
Description:
Name resolution for the name _ldap._tcp.dc._msdcs.carman.local timed out after none of the configured DNS servers responded.
Log Name: System
Source: NETLOGON
Date: 3/16/2014 8:02:07 PM
Event ID: 3096
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: CARMANSERVER.carman.local
Description:
The primary Domain Controller for this domain could not be located.
Log Name: System
Source: Microsoft-Windows-WinRM
Date: 3/16/2014 8:05:08 PM
Event ID: 10154
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: CARMANSERVER.carman.local
Description:
The WinRM service failed to create the following SPNs: WSMAN/CARMANSERVER.carman.local; WSMAN/CARMANSERVER.
Additional Data
The error received was 8344: %%8344.
User Action
The SPNs can be created by an administrator using setspn.exe utility.
Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 3/16/2014 10:50:55 PM
Event ID: 10009
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: CARMANSERVER.carman.local
Description:
DCOM was unable to communicate with the computer 208.67.222.222 using any of the configured protocolsSorry, the forum limited me to only 60000 characters per post, so here is some more detailed information:
Here's some initial diags/info from my server 2012 DC:
c:\windows\system32\dcdiag /test:DNS /v /e
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine HSSserver, is a Directory Server.
Home Server = HSSserver
* Connecting to directory service on server HSSserver.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=carman,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=carman,DC=local
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=carman,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=CARMANSERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=carman,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=HSSSERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=carman,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 2 DC(s). Testing 2 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\CARMANSERVER
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
The clock difference between the home server HSSSERVER and target
server CARMANSERVER is greater than one minute. This may cause
Kerberos authentication failures. Please check that the time service
is working properly. You may need to resynchonize the time between
these servers.
......................... CARMANSERVER passed test Connectivity
Testing server: Default-First-Site-Name\HSSSERVER
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... HSSSERVER passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\CARMANSERVER
Test omitted by user request: Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Test omitted by user request: FrsEvent
Test omitted by user request: DFSREvent
Test omitted by user request: SysVolCheck
Test omitted by user request: KccEvent
Test omitted by user request: KnowsOfRoleHolders
Test omitted by user request: MachineAccount
Test omitted by user request: NCSecDesc
Test omitted by user request: NetLogons
Test omitted by user request: ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Test omitted by user request: Replications
Test omitted by user request: RidManager
Test omitted by user request: Services
Test omitted by user request: SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Test omitted by user request: VerifyReferences
Test omitted by user request: VerifyReplicas
Testing server: Default-First-Site-Name\HSSSERVER
Test omitted by user request: Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Test omitted by user request: FrsEvent
Test omitted by user request: DFSREvent
Test omitted by user request: SysVolCheck
Test omitted by user request: KccEvent
Test omitted by user request: KnowsOfRoleHolders
Test omitted by user request: MachineAccount
Test omitted by user request: NCSecDesc
Test omitted by user request: NetLogons
Test omitted by user request: ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Test omitted by user request: Replications
Test omitted by user request: RidManager
Test omitted by user request: Services
Test omitted by user request: SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Test omitted by user request: VerifyReferences
Test omitted by user request: VerifyReplicas
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
Starting test: DNS
See DNS test in enterprise tests section
for results
......................... HSSSERVER passed test DNS
See DNS test in enterprise tests section for results
......................... CARMANSERVER passed test DNS
Running partition tests on : ForestDnsZones
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : DomainDnsZones
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : Schema
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : Configuration
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : carman
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running enterprise tests on : carman.local
Starting test: DNS
Test results for domain controllers:
DC: HSSserver.carman.local
Domain: carman.local
TEST: Authentication (Auth)
Authentication test: Successfully completed
TEST: Basic (Basc)
The OS
Microsoft Windows Server 2012 R2 Standard
(Service Pack level: 0.0)
is supported.
NETLOGON service is running
kdc service is running
DNSCACHE service is running
DNS service is running
DC is a DNS server
Network adapters information:
Adapter [00000010] Broadcom NetXtreme Gigabit
Ethernet:
MAC address is F0:1F:AF:E1:D1:C4
IP Address is static
IP address: 192.168.17.7, fe80::35d3:8713:ce0a:3680
DNS servers:
192.168.17.7
(HSSSERVER) [Valid]
192.168.17.5 (carmanserver.carman.local.) [Valid]
The A host record(s) for this DC was found
The SOA record for the Active Directory zone was found
The Active Directory zone on this DC/DNS server was found primary
Root zone on this DC/DNS server was not found
TEST: Forwarders/Root hints (Forw)
Recursion is enabled
Forwarders Information:
208.67.220.220 (<name unavailable>) [Valid]
208.67.222.222 (<name unavailable>) [Valid]
TEST: Delegations (Del)
Delegation information for the zone: carman.local.
Delegated domain name: _msdcs.carman.local.
DNS server: carmanserver.carman.local. IP:192.168.17.5 [Valid]
TEST: Dynamic update (Dyn)
Test record dcdiag-test-record added successfully in zone carman.local
Test record dcdiag-test-record deleted successfully in zone carman.local
TEST: Records registration (RReg)
Network Adapter
[00000010] Broadcom NetXtreme Gigabit Ethernet:
Matching CNAME record
found at DNS server 192.168.17.7:
25346b74-2fc2-4311-a54d-d500669d4026._msdcs.carman.local
Matching A record found
at DNS server 192.168.17.7:
HSSserver.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_ldap._tcp.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_ldap._tcp.e6c304e4-c161-4258-8d51-5a2f20a61c7a.domains._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_kerberos._tcp.dc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_ldap._tcp.dc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_kerberos._tcp.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_kerberos._udp.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_kpasswd._tcp.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_ldap._tcp.Default-First-Site-Name._sites.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_kerberos._tcp.Default-First-Site-Name._sites.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_ldap._tcp.gc._msdcs.carman.local
Matching A record found
at DNS server 192.168.17.7:
gc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_gc._tcp.Default-First-Site-Name._sites.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.7:
_ldap._tcp.pdc._msdcs.carman.local
Matching CNAME record
found at DNS server 192.168.17.5:
25346b74-2fc2-4311-a54d-d500669d4026._msdcs.carman.local
Matching A record found
at DNS server 192.168.17.5:
HSSserver.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_ldap._tcp.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_ldap._tcp.e6c304e4-c161-4258-8d51-5a2f20a61c7a.domains._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_kerberos._tcp.dc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_ldap._tcp.dc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_kerberos._tcp.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_kerberos._udp.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_kpasswd._tcp.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_ldap._tcp.Default-First-Site-Name._sites.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_kerberos._tcp.Default-First-Site-Name._sites.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_ldap._tcp.gc._msdcs.carman.local
Matching A record found
at DNS server 192.168.17.5:
gc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_gc._tcp.Default-First-Site-Name._sites.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.carman.local
Matching SRV record
found at DNS server 192.168.17.5:
_ldap._tcp.pdc._msdcs.carman.local
DC: CARMANSERVER.carman.local
Domain: carman.local
TEST: Authentication (Auth)
Authentication test: Successfully completed
TEST: Basic (Basc)
The OS
Microsoft Windows Server 2008 R2 Standard
(Service Pack level: 1.0)
is supported.
NETLOGON service is running
kdc service is running
DNSCACHE service is running
DNS service is running
DC is a DNS server
Network adapters information:
Adapter
[00000007] Broadcom BCM5716C NetXtreme II
GigE (NDIS VBD Client):
MAC address is A4:BA:DB:12:D1:77
IP Address is static
IP address: 192.168.17.5
DNS servers:
127.0.0.1
(carmanserver.carman.local.) [Valid]
192.168.17.7 (HSSSERVER) [Valid]
The A host record(s) for this DC was found
The SOA record for the Active Directory zone was found
The Active Directory zone on this DC/DNS server was found primary
Root zone on this DC/DNS server was not found
TEST: Forwarders/Root hints (Forw)
Recursion is enabled
Forwarders Information:
208.67.220.220 (<name unavailable>) [Valid]
208.67.222.222 (<name unavailable>) [Valid]
TEST: Delegations (Del)
Delegation information for the zone: carman.local.
Delegated domain name: _msdcs.carman.local.
DNS server: carmanserver.carman.local. IP:192.168.17.5 [Valid]
TEST: Dynamic update (Dyn)
Test record dcdiag-test-record added successfully in zone carman.local
Test record dcdiag-test-record deleted successfully in zone carman.local
TEST: Records registration (RReg)
Network Adapter
[00000007] Broadcom BCM5716C NetXtreme II
GigE (NDIS VBD Client): -
When I tried to do KO88, i keep getting this error:-
"Balancing field "Profit Center" in line item 001 not filled". How do i prevent such errors? Can I only settle IOs with the Source structure correctly in place? Does that mean that I can only settle IOs with cost elements declared in the Source structure?
Pls advise.
Best Regards,
EthanHi,
If I enter my IO in a GL line item whereby the GL is not declared in the source structure and the settlement rule of my IO also has a GL which is not declared in the source structure, then does it matter? Am I still able to settle my IO?
THE GL, IN WHICH LINE ITEM YOU HAVE ENTERED IO, SHOULD BE DECLARED IN THE SOURCE STRUCTURE. SOURCE STRUCTURE IS NOTHING BUT THE " SOURCES FOR THE VALUES, WHICH ARE TO BE SETTLED". UNLESS THE GL's OF ALL THE LINE ITEMS OF THE IO, ARE DECLARED IN SOURCE CTRUCTURE, YOU CANNOT SETTLE IO.
Sometimes when I settle my IOs, I also rcv error mesgs saying that a particular GL needs a CO assignment. Why is that so? - AM NOT CLEAR WITH THIS QUESTION.
All the best.
Santosh -
This is the replication status for the following directory partition on this directory server.
Directory partition:
DC=ForestDnsZones,DC=shankarpack,DC=com
This directory server has not received replication information from a number of directory servers within the configured latency interval.
Latency Interval (Hours):
24
Number of directory servers in all sites:
1
Number of directory servers in this site:
1
The latency interval can be modified with the following registry key.
Registry Key:
HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Replicator latency error interval (hours)
To identify the directory servers by name, use the dcdiag.exe tool.
You can also use the support tool repadmin.exe to display the replication latencies of the directory servers. The command is "repadmin /showvector /latency <partition-dn>".sir, i means that secondary domain server is down due to system motherboard issue.so guide to me that how remove all setting of the secondary domain from primary domain. (shankarpack.com).
errors are :
Active Directory Domain Services could not resolve the following DNS host name of the source domain controller to an IP address. This error prevents additions, deletions and changes in Active Directory Domain Services from replicating between one or more
domain controllers in the forest. Security groups, group policy, users and computers and their passwords will be inconsistent between domain controllers until this error is resolved, potentially affecting logon authentication and access to network resources.
Source domain controller:
AVS1
Failing DNS host name:
f0c8f1a9-50fd-4785-8ca4-29b1d824b251._msdcs.shankarpack.com
NOTE: By default, only up to 10 DNS failures are shown for any given 12 hour period, even if more than 10 failures occur. To log all individual failure events, set the following diagnostics registry value to 1:
Registry Path:
HKLM\System\CurrentControlSet\Services\NTDS\Diagnostics\22 DS RPC Client
User Action:
1) If the source domain controller is no longer functioning or its operating system has been reinstalled with a different computer name or NTDSDSA object GUID, remove the source domain controller's metadata with ntdsutil.exe, using the steps outlined
in MSKB article 216498.
2) Confirm that the source domain controller is running Active Directory Domain Services and is accessible on the network by typing "net view \\<source DC name>" or "ping <source DC name>".
3) Verify that the source domain controller is using a valid DNS server for DNS services, and that the source domain controller's host record and CNAME record are correctly registered, using the DNS Enhanced version of DCDIAG.EXE available on http://www.microsoft.com/dns
dcdiag /test:dns
4) Verify that this destination domain controller is using a valid DNS server for DNS services, by running the DNS Enhanced version of DCDIAG.EXE command on the console of the destination domain controller, as follows:
dcdiag /test:dns
5) For further analysis of DNS error failures see KB 824449:
http://support.microsoft.com/?kbid=824449
Additional Data
Error value:
11004 The requested name is valid, but no data of the requested type was found.
This is the replication status for the following directory partition on this directory server.
Directory partition:
DC=ForestDnsZones,DC=shankarpack,DC=com
This directory server has not received replication information from a number of directory servers within the configured latency interval.
Latency Interval (Hours):
24
Number of directory servers in all sites:
1
Number of directory servers in this site:
1
The latency interval can be modified with the following registry key.
Registry Key:
HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Replicator latency error interval (hours)
To identify the directory servers by name, use the dcdiag.exe tool.
You can also use the support tool repadmin.exe to display the replication latencies of the directory servers. The command is "repadmin /showvector /latency <partition-dn>".
This server is the owner of the following FSMO role, but does not consider it valid. For the partition which contains the FSMO, this server has not replicated successfully with any of its partners since this server has been restarted. Replication errors are
preventing validation of this role.
Operations which require contacting a FSMO operation master will fail until this condition is corrected.
FSMO Role: DC=shankarpack,DC=com
User Action:
1. Initial synchronization is the first early replications done by a system as it is starting. A failure to initially synchronize may explain why a FSMO role cannot be validated. This process is explained in KB article 305476.
2. This server has one or more replication partners, and replication is failing for all of these partners. Use the command repadmin /showrepl to display the replication errors. Correct the error in question. For example there maybe problems with IP connectivity,
DNS name resolution, or security authentication that are preventing successful replication.
3. In the rare event that all replication partners being down is an expected occurance, perhaps because of maintenance or a disaster recovery, you can force the role to be validated. This can be done by using NTDSUTIL.EXE to seize the role to the same server.
This may be done using the steps provided in KB articles 255504 and 324801 on http://support.microsoft.com.
The following operations may be impacted:
Schema: You will no longer be able to modify the schema for this forest.
Domain Naming: You will no longer be able to add or remove domains from this forest.
PDC: You will no longer be able to perform primary domain controller operations, such as Group Policy updates and password resets for non-Active Directory Domain Services accounts.
RID: You will not be able to allocation new security identifiers for new user accounts, computer accounts or security groups.
Infrastructure: Cross-domain name references, such as universal group memberships, will not be updated properly if their target object is moved or renamed. -
Join-Request not received by WLC
Hi all,
I'm in the process of upgrading autonomous 1242(MIC) APs belongs to an external client of to make them part of the existing lwapp based infrastructure.
I could observe successful Discovery negotiation.Next,AP sends the join-request but WLC debug does not indicate receiving it.
1.wireshark packet capture indicates that Discovery & jOin processes use indentical ports at each phasee-this will rule out the firewalls.
2.no duplicate IPs
3.controllers are not exhausted with APs
4.DHCP option 43 is configured and could see it in action when I do a dhcp debug
The other interesting observation is that I could not see any certs on autonomous APs before conveting them to lwapp when I issue sh crypto pki certificates
Please refer to the attachment for debug outputs.
Any help is much appreciated.
cheers,
janeshaHi,
I found the AP manager address and as you predicted it does not respond to an extended ping sourced by the new subnet.Tried the same with a subnet where the APs are happily working in lwapp and the results were the same.
Packet capture on the AP shows that Join-request is sent to the AP manager address.As expected, AP tries sending to AP manager addresses of all 4 controllers before giving up.
Client confirmed that they have opened the subnet to all traffic from my side of the network.
I will try spanning the uplink port of the controller sometime today once I dig up info on the uplink port.
Thanks for the advice.
cheers -
Hi guys,
Need your expert advise.
ISP has given me a /64 block and an ethernet link to their PE router. I have an isr router with 2 fa. I want to give each fa an ip address from the block above.
I tried using subnet calculator and applied /120 on each fa. I can ping sourcing from the fa (connected to the isp cable) successfully. However sourcing from the other fa, i cant.
Is there anything missing?
Thanks.Hi,
How is your ISP side interface configured?. Is it with /120 mask or /64?. If it is /120, you should make sure the ISP have a return path pointing towards you.
if it is /64, you need to enable proxy arp in your interface towards ISP cable.
-Nagendra -
BGP PROCESSES AND ICMP TREATMENT
Hi everybody
I hope you guys are doing fine.
http://www.cisco.com/c/en/us/support/do
cs/ip/border-gateway-protocol-bgp/107615-highcpu-bgp.html#understandbgp
From the above link:
While BGP scanner runs, low priority processes need to wait a longer time to access the CPU. One low priority process controls Internet Control Message Protocol (ICMP) packets such as pings. Packets destined to or originated from the router may experience higher than expected latency since the ICMP process must wait behind BGP scanner. The cycle is that BGP scanner runs for some time and suspends itself, and then ICMP runs. In contrast, pings sent through a router should be switched via Cisco Express Forwarding (CEF) and should not experience any additional latency.
1)Are we saying the pings sourced from the router will be switched using CEF above? Just want to confirm that.
Please consider the following example:
CE----------R1-----ISP CORE---
Above CE is customer router connected to R1 for internet connectivity. R1 carries Internet routes in a service provider network
So If we issue pings sourced from R1 to CE, will this pings be CEF switched? will the ping replies from CE destined to R1,given lowest ICMP priority, even though CE is responding to R1 pings?
ThanksHello Sarah,
I hope you are well
ICMP packets originated by the router or destinated to the router are processed by main cpu not by CEF, they are actually placed in an internal queue waiting to be process switched by the main cpu and this may expose them to some delay as explained in the link about BGP scanner. (this is called punting to the main cpu the packets are punted). The same happens for protocol messsages.
The reason is that the packet needs to be examined to prepare the appropriate answer.
So going to your example, the CE node will process switch the ICMP echo request coming from R1 and will process switch the ICMP echo reply to R1, the same happens for R1, that has a full internet table, it process switches its own requests and CE's replies.
So it is R1 the more likely device to introduce delay variation.
in other words the RTT of ICMP packets may vary depending on when they are issued.
Traffic going through the router is CEF switched and far less impacted by BGP scan process.
Hope to help
Giuseppe -
How does "Find iPhone" work for a wifi-only iPad?
My wife's iPad is in out home on a satellite internet connection, in the country, connected to our router which assigns it an internal IP address. Yet when I log into Find iPhone from my iPhone, it shows up right inside the house most of the time, within 200' or so other times. Now the "circle of uncertainty" is larger then my wife's iPhone, it's still pretty accurate given the way it's connected. This baffles me.
Thanks,
GammaPhilly_Phan wrote:
That doesn't answer HOW the database determined the router location to begin with./message-abuse!input.jspa?objectID=28092111&objectType=2
It does – the OP is using multiple iOS devices, the iPhones have GPS which is used to submit data to Apple via the diagnostics & usage. It may also come from other iOS users who have the same feature enabled.
Philly_Phan wrote:
Drew Reece wrote:
I suspect the reason that your cellular iPad is getting accurate locations is because your modem is broadcasting a wifi access point. IP's are a poor indicator of location, despite what CSI tells you
That access point will be added to Apples database. Your iPhone has a setting that will help with this… 'Settings > General > Usage > Diagnostics & usage', if Automatically send is enabled then you are reporting anonymous data to Apple, including the location of the networks you use, the same network that is in range for the iPad. Apple is using iOS to crowd source the data.
Not true at all. A cellular iPad also has a GPS receiver and it obtains location information from GPS. GPS signals are separate from and completely unrelated to both the Internet and the cellular telephone network. GPS signals come directly from the GPS satellites. They provide signals that allow GPS receivers to calculate latitude and longitude information. Software inside the device translates latitude/longitude into landmark information, such as street addresses.
I was referring to the GPS on the iPhone.
I know how GPS works thanks, I can see 4 satellites in this hemisphere, the others are out of view
I was also assuming this was a wifi iPad (no cellular, no GPS) - hence the reason for the original poster surprise. However I may have simply read 'wife's iPad' as 'wifi iPad'? -
w2k8 domain with two DCs - this error is present.
initially we had issues with initial synchronization of the directory by we logged a call with MS and they address a registry entry that bypassed the initial syncronization, but I can still see the errors below and a client not registering in DNS sue to no permissions.
canyou advise what can I do to get rid of this error:
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 28/10/2009 18:54:04
Event ID: 2088
Task Category: DS RPC Client
Level: Warning
Keywords: Classic
User: ANONYMOUS LOGON
Computer: olivia.domain.com
Description:
Active Directory Domain Services could not use DNS to resolve the IP address of the source domain controller listed below. To maintain the consistency of Security groups, group policy, users and computers and their passwords, Active Directory Domain Services successfully replicated using the NetBIOS or fully qualified computer name of the source domain controller.
Invalid DNS configuration may be affecting other essential operations on member computers, domain controllers or application servers in this Active Directory Domain Services forest, including logon authentication or access to network resources.
You should immediately resolve this DNS configuration error so that this domain controller can resolve the IP address of the source domain controller using DNS.
Alternate server name:
katie
Failing DNS host name:
60c35a20-978b-4e86-9751-e65d9e584e76._msdcs.domain.com
NOTE: By default, only up to 10 DNS failures are shown for any given 12 hour period, even if more than 10 failures occur. To log all individual failure events, set the following diagnostics registry value to 1:
Registry Path:
HKLM\System\CurrentControlSet\Services\NTDS\Diagnostics\22 DS RPC Client
User Action:
1) If the source domain controller is no longer functioning or its operating system has been reinstalled with a different computer name or NTDSDSA object GUID, remove the source domain controller's metadata with ntdsutil.exe, using the steps outlined in MSKB article 216498.
2) Confirm that the source domain controller is running Active Directory Domain Services and is accessible on the network by typing "net view \\<source DC name>" or "ping <source DC name>".
3) Verify that the source domain controller is using a valid DNS server for DNS services, and that the source domain controller's host record and CNAME record are correctly registered, using the DNS Enhanced version of DCDIAG.EXE available on http://www.microsoft.com/dns
dcdiag /test:dns
4) Verify that this destination domain controller is using a valid DNS server for DNS services, by running the DNS Enhanced version of DCDIAG.EXE command on the console of the destination domain controller, as follows:
dcdiag /test:dns
5) For further analysis of DNS error failures see KB 824449:
http://support.microsoft.com/?kbid=824449
Additional Data
Error value:
11001 No such host is known.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS General" />
<EventID Qualifiers="32768">2088</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>22</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2009-10-28T18:54:04.390Z" />
<EventRecordID>179247</EventRecordID>
<Correlation />
<Execution ProcessID="700" ThreadID="920" />
<Channel>Directory Service</Channel>
<Computer>olivia.domain.com</Computer>
<Security UserID="S-1-5-7" />
</System>
<EventData>
<Data>katie</Data>
<Data>60c35a20-978b-4e86-9751-e65d9e584e76._msdcs.domain.com</Data>
<Data>11001</Data>
<Data>No such host is known.</Data>
<Data>System\CurrentControlSet\Services\NTDS\Diagnostics</Data>
<Data>22 DS RPC Client</Data>
</EventData>
</Event>
C:\Users\secadmin>net view \\katie
Shared resources at \\katie
Share name Type Used as Comment
dfs Disk
NETLOGON Disk Logon server share
SYSVOL Disk Logon server share
The command completed successfully.
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = olivia
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: NorthwayHouse\OLIVIA
Starting test: Connectivity
......................... OLIVIA passed test Connectivity
Doing primary tests
Testing server: NorthwayHouse\OLIVIA
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
......................... OLIVIA passed test DNS
Running partition tests on : ForestDnsZones
Running partition tests on : DomainDnsZones
Running partition tests on : Schema
Running partition tests on : Configuration
Running partition tests on : domain
Running enterprise tests on : domain.com
Starting test: DNS
Test results for domain controllers:
DC: olivia.domain.com
Domain: domain.com
TEST: Basic (Basc)
Warning: The AAAA record for this DC was not found
TEST: Delegations (Del)
Error: DNS server: katie.domain.com. IP:10.30.0.2
[Broken delegated domain domain.com.domain.com.]
Error: DNS server: olivia.domain.com. IP:10.30.0.1
[Broken delegated domain domain.com.domain.com.]
TEST: Dynamic update (Dyn)
Warning: Failed to delete the test record _dcdiag_test_record in zone domain.com
TEST: Records registration (RReg)
Network Adapter
[00000006] Intel(R) PRO/1000 CT Network Connection:
Warning:
Missing AAAA record at DNS server 10.30.0.1:
olivia.domain.com
Warning:
Missing AAAA record at DNS server 10.30.0.1:
gc._msdcs.domain.com
Warning: Record Registrations not found in some network adapters
Summary of test results for DNS servers used by the above domain
controllers:
DNS server: 10.30.0.1 (olivia.domain.com.)
1 test failure on this DNS server
DNS server: 10.30.0.2 (katie.domain.com.)
1 test failure on this DNS server
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: domain.com
olivia PASS WARN PASS FAIL WARN WARN n/a
......................... domain.com failed test DNSThanks Isaac, but unfortunately this issue persists and I am still getting that error for the client failing to register in dns
I have made the changes as suggested and the output of dcdiag is below as well as the events, which may be relevant
Log Name: DNS Server
Source: Microsoft-Windows-DNS-Server-Service
Date: 29/10/2009 09:42:42
Event ID: 4011
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: olivia.domain.com
Description:
The DNS server was unable to add or write an update of domain name alexis in zone domain.com to the Active Directory. Check that the Active Directory is functioning properly and add or update this domain name using the DNS console. The extended error debug information (which may be empty) is "00002098: SecErr: DSID-03150E8A, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0". The event data contains the error.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DNS-Server-Service" Guid="{71A551F5-C893-4849-886B-B5EC8502641E}" EventSourceName="DNS" />
<EventID Qualifiers="49152">4011</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-10-29T09:42:42.000Z" />
<EventRecordID>377</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>DNS Server</Channel>
<Computer>olivia.domain.com</Computer>
<Security />
</System>
<EventData Name="DNS_EVENT_DS_WRITE_FAILED">
<Data Name="param1">alexis</Data>
<Data Name="param2">domain.com</Data>
<Data Name="param3">00002098: SecErr: DSID-03150E8A, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0</Data>
<Binary>05000000</Binary>
</EventData>
</Event>
Event Type: Warning
Event Source: DnsApi
Event Category: None
Event ID: 11165
Date: 29/10/2009
Time: 09:32:42
User: N/A
Computer: ALEXIS
Description:
The system failed to register host (A) resource records (RRs) for network adapter
with settings:
Adapter Name : {9C8B441A-8831-4B60-8470-D7D3982B3471}
Host Name : alexis
Primary Domain Suffix : domain.com
DNS server list :
10.30.0.1, 10.30.0.2
Sent update to server : 10.30.0.1
IP Address(es) :
10.0.0.167
The reason the system could not register these RRs was because the DNS server contacted refused the update request. The reasons for this might be (a) you are not allowed to update the specified DNS domain name, or (b) because the DNS server authoritative for this name does not support the DNS dynamic update protocol.
To register the DNS host (A) resource records using the specific DNS domain name and IP addresses for this adapter, contact your DNS server or network systems administrator.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 2a 23 00 00 *#..
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = olivia
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: NorthwayHouse\OLIVIA
Starting test: Connectivity
......................... OLIVIA passed test Connectivity
Doing primary tests
Testing server: NorthwayHouse\OLIVIA
Starting test: Advertising
......................... OLIVIA passed test Advertising
Starting test: FrsEvent
......................... OLIVIA passed test FrsEvent
Starting test: DFSREvent
......................... OLIVIA passed test DFSREvent
Starting test: SysVolCheck
......................... OLIVIA passed test SysVolCheck
Starting test: KccEvent
......................... OLIVIA passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... OLIVIA passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... OLIVIA passed test MachineAccount
Starting test: NCSecDesc
......................... OLIVIA passed test NCSecDesc
Starting test: NetLogons
[OLIVIA] User credentials does not have permission to perform this
operation.
The account used for this test must have network logon privileges
for this machine's domain.
......................... OLIVIA failed test NetLogons
Starting test: ObjectsReplicated
......................... OLIVIA passed test ObjectsReplicated
Starting test: Replications
[Replications Check,OLIVIA] DsReplicaGetInfo(PENDING_OPS, NULL)
failed, error 0x2105 "Win32 Error 8453"
......................... OLIVIA failed test Replications
Starting test: RidManager
......................... OLIVIA passed test RidManager
Starting test: Services
Could not open NTDS Service on OLIVIA, error 0x5 "Win32 Error 5"
......................... OLIVIA failed test Services
Starting test: SystemLog
An Error Event occurred. EventID: 0x000016AD
Time Generated: 10/29/2009 08:58:30
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 10/29/2009 09:24:33
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 10/29/2009 09:24:34
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0x00000457
Time Generated: 10/29/2009 09:24:36
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:34:42
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:35:03
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:35:04
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:35:06
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:35:10
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:35:11
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:35:32
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:35:53
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:36:15
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:36:36
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:36:57
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:37:18
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:37:39
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:38:00
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:38:21
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:38:42
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:38:43
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:38:44
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:38:45
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:38:46
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:39:07
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:39:28
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:39:49
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
An Error Event occurred. EventID: 0xC0002719
Time Generated: 10/29/2009 09:40:10
EvtFormatMessage failed, error 15100 Win32 Error 15100.
(Event String (event log = System) could not be retrieved, error
0x3afc)
......................... OLIVIA failed test SystemLog
Starting test: VerifyReferences
......................... OLIVIA passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : domain
Starting test: CheckSDRefDom
......................... domain passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... domain passed test CrossRefValidation
Running enterprise tests on : domain.com
Starting test: LocatorCheck
......................... domain.com passed test LocatorCheck
Starting test: Intersite
......................... domain.com passed test Intersite -
How does IOS choose what IPv6 source address to use?
I have a 3750X with IOS 15.2.2E.
I have multiple IPv6 addresses on the default VLAN (VLAN 1):
ipv6 address 2001:470:...../64
ipv6 address 2001:470:...../64
ipv6 address 2605:A000:..../64
I have one default IPv6 route:
ipv6 route ::/0 Vlan1 FE80::.....
S ::/0 [1/0]
via FE80::....., Vlan1
My question is: when I issue a ping from the 3750X, how does the switch choose what source address to use?
Currently, it seems to use the 2605:A000 address, but why?
Can I change this behavior?
Thanks!OK,
How about my second question: Can I change this behavior in IOS?
Thanks! -
I have a windows 8 computer and have recently updated my ipod to the latest ios and it has wiped my Ipod clean except for my photos. whilst trying to get my music back using different sources like CD's and stuff i cant seem to get any album art to load on my Ipod? I can go on itunes and highlight single/multiple items and change the artwork and my computer will confirm it but when I look on my Ipod it doesnt display any art work or allow me to change the artwork that is already there? i need help please!
Album artwork can be added/changed on songs via the iTunes Get Info menu item from the File menu. Note that music that you loaded from CDs will not have any artwork. If you want to aquire artwork you can try the File menu item Library > Get Artwork or you can download artwork from the internet, etc. Note that just changing artwork on your computer won't affect the iPod until you sync.
If the artwork is correct on your computer iTunes then delete all the music on your iPod by syncing with iTunes with no music selected. Then reload the music onto your iPod by again syncing with iTunes with all the music you want selected. -
I just updated my iPhone and my iPad to iOS 5.
Restoring the backup just worked fine as well as syncing the music and videos, but my Apps weren't synced at all.
With my iPhone I got it done, after I installed some of my apps using the cloud and suddenly the all were installed during the next sync with my iTunes. All the stored data of my apps were on the iPhone, so I didn't loose anything.
But with my iPad, this didn't work as well. I seem to have to install all apps by my self from the cloud.
But my major problem is, that when I connect my devices to my Mac Book Air, they are shown in the source list, but except for showing 'iPhone' or 'iPad' I see nothing. I can't configure any sync options, so I am not able to do change or do anything.
When updated to iOS 5 I used to restore the backup from before updating my iPhone/iPad in iTunes.
Thanks for your help.
Best regards,
Rene
GermanyYou should be importing all pics taken with the iphone to your computer regularly as you would with any digital camera, particularly before any update or restore.
You should also be syncing your contacts to your computer regularly. They hsould be in whatever program/service that you have selected to sync.
If you have failed to do this, then they are very likely gone.
You can try restoring from backup. -
you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues that could prevent you from restoring. After restarting the computer and iOS device, attempt to restore again.
How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library. Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC. If iTunes still crashes, then if could be a number of other things, but probably not your library. My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes. If that doesn't work, then my next ideas you won't like. -
How can I get the source code of the google chrome ios app
How can I get the source code of the google chrome ios app
Google is your friend
http://www.chromium.org/
and
https://developers.google.com/chrome/mobile/docs/iosoverview -
HT2052 are there sources for apps that will run in iOS 3?
I have a 1st generation iPod touch, which I have upgraded to iOS 3.1.3, but it seems as though there are no apps that will run in less than iOS 4. Are there any sources for older versions of the apps that will work?
There are still a some apps that will work with the 1G iPod with iOS 3.1.3. However, there is not way to search by compatibility. You just have look at the Requirements section for the app.
You can only use apps purchased from the app store.
Maybe you are looking for
-
SAP NW7.01 ABAP trial version installation on Windows Vista. Error message
Hi gurus, I am installing SAPNW7.01 ABAP trial version.. getting following Error nessage ..ANy idea? The installer is unable to run in graphical mode. Try running the installer with the -console or -silent flag. I have WINDOWS VISTA with 32bit..I rea
-
F.13 Automatic Clearing of customers subject to EWT
Hi All Customer is subjected to withholding tax (in our case TCS). We have received down payment and appropriate amount of TCS (configured as EWT) was deducted. Now an invoice is generated for an equal amount which is appearing in Customer amount (i.
-
Weblogic WebService with LogFactory
Hey guys, I'm facing the following issue for at least a week. Searched everywhere but found nothing. My environment: Windows Vista JDeveloper 11.1.1.1.0 Weblogic Server 11g, version 10.3.1.0 IBatis 2.3.0.677 My goal is to develop a WebService that lo
-
Had to reinstall my OS when done I tried to reinstall apps from app store but they are not there. When I go to that apps page it only give me an option to purchase again. How can I download again? Does the app store have a feature like iTunes to vie
-
Git extention for SQL Developer 3
Hi; I try to use SQL Developer and I want to use Git for versioning. At first I want to know from where I can download git extention and the second I want to know how can I setup the git repository and set the ssh remote. tanx