Ios7 podcast playback speeds not working in Nissan Leaf

In ios6, I was able to control my iphone 4 through the stock radio (via usb sync cable) and playback podcasts at 1.5x or 2x speed. after upgradeding to ios7, I can no longer playback podcasts at higher speeds when I use the radio to navigate to a podcast. If I navigate directly on the iphone, the iphone will playback at higher speed, but then the radio console freezes and I am unable to navigate to other podcasts, or skip or fast forward using the console.
Suggestions?
Thanks,
G

I'm having a similar issue, it seems to be related to the fact that the podcasts are no longer running from the music app - but I suspect that the Nissan interface is accessing the podcasts through the music app's API. I used to listen to my podcasts in 2x speed, and now when I play the podcasts through the usb sync cable in my Nissan (Rogue in my case) it is still playing in 2x speed but I have no way to change it. If I navigate to the podcast app on the phone, I'm able to have the controls (on my phone) but if I navigate to it via the Nissan interface it's stuck on 2x. Would sure like to know how to control the speed chosen by the Nissan playback. I absolutely hate that they split the podcasts out of the music app...

Similar Messages

HT5012 Update my iPad to ios7.1 and messaging not working .......suggestions?

Updated my iPad Air to ios7.1. Messaging not working. Suggestions????

What happens when you try? Getting an error message?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

Premiere Pro CC Source and Program Playback Controls not working.. help please.

Hi,
Need your help to find out why none of the Premiere Pro CC Source and Program Playback Controls are working.. I can do playback using spacebar, but not clicking on the controls... same goes the rest.
Thank you,
Mauro

Dear Mark,
Thank you for the hint/link, reseting the toolbar did the trick.
Regards,
Mauro

Why is Podcast specification is not working as described, in iTunes?

I have created a podcast as per the latest podcast specifications mentioned in
http://www.apple.com/itunes/podcasts/techspecs.html
But not everything works, as expected.
1) The "Artist" column is displaying "Unknown" even though, the <itunes:author> tag has a value in it.
2) Keyword search is not working. When I perform a search based on the keywords mentioned in the <itunes:keywords> tag, my podcast is not showing up in the search results. Does iTunes search engine take a few days to index these keywords with the podcast?
3) The image is not showing up, even though I have specified an image in the <itunes:image> tag. And the spec says that it takes a few days before the image appears. Approximately how long does it take for the image to appear in iTunes, after a Podcast is submitted on it?
In general does it take iTunes some time before it shows certain content for a podcast? Because, all of these things work in other podcatchers (for e.g Yahoo podcatcher), but they dont work as expected in iTunes.
-Thank you very much in advance for answering these questions.
Windows Windows XP Pro Submitting a podcast in iTunes

Scott,
Thank you for your reply. I am unable to "Save and then upload". How do you do this?
Make sure to set images on a per podcast basis as
well (tunes -. Get Info - Artwork and fill in other
areas) Save file and the nupload.
iTunes search and update is affected by the phase of
the moon so no one really knows. Key words need to
have commas but even then it doesn't seem to work
most of the time.
I still need to know why certain columns are not being populated correctly, for example the Artist appears as unknown even though I have supplied a value in <itunes:author> tag. And there are many other issues.

Captivate 7 event video playback controls not working

Hi,
I'm using Captivate 7 and published an mp4 event video with limited playback controls (only play, pause, back, and close) on the slide, since the event video controls won't show up once published. When I publish the HTML5 video (with or without seamless tabbing) the controls are not working. When I click play the video plays and I can pause it, but when I want to continue play, the controls are not working.
I tried only to use the skins (clear, corona, and halo) given with the event video, but then I can't pause the video at all, since the controls are not showing.
We need the video to play in HTML5 mode for iPads and computers, but we're at a loss with the controls. The video has got to be limited to only play, pause, back, and close - no scrubbing or forwarding. Any ideas?
Thanks,
Nat

I know you will hate Captivate for this. But if you are publishing to HTML5, the skins you select here won't make any difference as HTML5 output comes with its own mysterious skin which is not visible until you publish and check.
Here is how that skin looks when viewed in Google Chrome browser on my laptop running on Windows 7.
Here is the skin I have used for that in the Captivate editor.
The best way to test these outputs is from a webserver or SCORM Cloud.
Sreekanth

Playback button not working

So the playback button is not working and the only time it starts working is after an update.
What is wrong with it and how can I fix it?

Welcome to our community, Angie
It probably has to do with exactly how the Captivate content
is being viewed. For example, the button may not work for you if
you are simply running the project from Preview mode in the
browser. But if you are running from a link that opens a new
window, it may close without issue.
The bottom line here is that you probably need to investigate
and compare exactly how you are opening or launching the Captivate.
Cheers... Rick

Music, Podcast, Spotlight Search not working iOS 7

Since upgrading my iPhone 5 on Wednesday, I haven't been able to listen to music or podcasts, because when I open those apps, they crash within a minute. While I am able to access spotlight search, telling it to search does absolutely nothing. Is anyone else having these problems?

I am experiencing the same issue. My email accounts are fine. There is no issue with that. The issue appears to be between the Mail app and the Spotlight Search feature. If the Mail app is running then the spotlight search works fine. However, when the Mail app is closed it fails to work.
This is such a pain. I use the feature a TOn and to have it not work is a joke. I wish Apple would address all of the issue associated with iOs 5. Upgrading to a iPhone 4S along with iOS 5 has been a complete nightmate. I have seriously considered returing my phone and switching to an Android based phone. Apple is losing their edge by putting out shotty products coupled with poorly developed software.
Time is running short Apple. Fix the issues or you may have larger problems ahead.
It appears as if the operating system is becoming too complex for Apple to manage. The demise of the great phone and software combination if immenent. Apple reigh of supremecy is begining to diminish.

IOS7 Update - Cellular Service Not Working

After installing the long awaited IOS7 today, my cellular service does not work. Now I can only use

I managed to get my ipad working after hours. The problem was that with the new ios7 came a carrier setting update 'Vodacom 15.1' which is the problem. Vodacom 15.0 is working.
How to fix.
Go to iTunes and make a backup of your device. Restore it from iTunes and restore your device from your backup. Do not accept any carrier setting update when prompted. After the carrier update your cellular will not work if you have the same problem.
If you have an iPhone go to settings, general, about, carrier.
Look at the carrier setting there and then look at your ipad. You will find that your ipad is probably a newer version currently.
Note that this is not a ios7 issue, but a carrier setting issue.
Hope it helps.
Please let me know if you need more help.
Ps. My ipad is still working great. What a relief. Almost took it in for repairs.

Pause FMR recording and video playback capture not working??

Hello!
I'm trying to record full motion recording in CAPTIVATE, but the PAUSE feature looks like it is not working for me. I even tried to modify the shortcut key, but nothing works. Anybody else have this trouble or am I missing something obvius here?? I thought that maybe the FMR mode cannot be PAUSED, but nothing on that matter can be found in the manual.
Also, I'm trying to produce e-learning content for PREMIERE and SOUNDBOOTH. I've noticed that video playback within PREMIERE is not captured by CAPTIVATE. I've seen on the forum that others had this issue. Is version 5 of captivate behaving the same? Is it still not possible to capture onscreen video playback?
Any info here would be greatly appreciated.
Thanks!

I'm having the same problem where Captivate 5 in FMR doesn't respond to the Pause key, however I'm noticing that there hasn't been a solution supplied here.
Is there another location/forum where Adobe representatives for Captivate are actively monitoring questions and problems for this product?
-- Sam

Cross browser testing : Modifier Keys playback actions not working in chrome and Firefox

Hi,
In my work flow I have to select multiple items in list.So I have recorded 'Ctrl+Click' action to select list items.In Chrome and Firefox it is not selecting multiple Items.
Even Ctrl+A,Ctrl+C,Ctrl+V also not working in chrome and Firefox.Complete modifier keys support is not observed in chrome and Firefox.Let me Know how to automate modifier keys actions in cross browser?
Regards,
Nagasree.

Hi Nagasree,
Welcome to MSDN forums.
First,please make sure the Chrome and Firefox is supported by cross browser testing.
Latest version of Chrome and Firefox supported by cross browser testing are Chrome version 38.0.2125.111 and
Firefox 33.
I doubt whether Chrome and Firefox in cross browser testing don’t support automating modifier keys or there is anything wrong on it if you are using supported browser. Since this issue is related to the Extensions tool
Selenium components for Coded UI Cross Browser Testing, if possible, I suggest you post this
issue here, click “Q AND A”, and then you could post this issue there, you would get dedicated
support there.
Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Iphone 4s ios7 music player was not working, here's a bug fix.

hi there
i had a problem with my wifes iphone 4s, today morning while travelling to work i changed a setting on repeat option and changed it to repeat artist, it was fine until when i finish my work and on my way back i found songs are not playing anymore, lots of stop signs next to my song list, play/pause button not working, album arkwork keep moving from one to another on its own, so after i reach home i try to do some research on Apple support communities, try to soft reset my phone closing all the apps on background didnt work, also note that control centre music player was not working as well. none of the solutions worked. after trying for two hours i found out that the trouble is in repeat options , so i changed it from repeat artist to repeat off. and the music start playing as usual, but i still have those stop buttons next to the songs i tried to play earlier. At least it fixed temporarily. please also note that in the meantime i tried to sync my phone with the pc and suddenly its start syncing all the songs again assuming there were no songs on my iphone. so guys i think soft reset might not help all the time but try to remember what settings you changed recently and change it back to the original option, not sure ,but it might help. hopin this will help some of you out there. and i already feed it back to Apple, so hopefully they will fix it soon.

Not sure why you are having problems. I have had no problems with my 4S playing music after the update. Hopefully you will get it worked out.

Seek or start playback offset not working on big flv's

Hello,
I try to start a FLV (created with soundbooth cs5) at a certain point of time using ns.play('video', 33000) or even just ns.seek(33000);
The FLV is about 9 hours long.
How do I make this work ? And why is it not working?

Do you face problem with all big flv files or just few set of files? Is it possible for you to pass on that files so that we can check at our end? But before you that - which version of FMS and Flash Player version are you on?

Custom speed not working in motion path behaviour of emitter

I am trying ot make a custom speed motion path along an open spline. Any amount of adjusting of keyframes and percentages produce no movement at all along the path. The emitter is stuck at the beginning of the path. All the other speed options work except for custom, in the motion path behaviour. What's going on here?

What's going on is a little complex.
When you first add a Motion Path and select Custom Speed, you get a "default" 0% - 100% over the life of the behavior [basically the same as Constant]. If you try to add keyframes in between, it can mess things up pretty good. The results you get can be unexpected.
If you "clear" the automatic default keyframing, then the Custom speed stays at 0% (there are no keyframes). If you move the playhead and change the Custom parameter, nothing "takes" since no original keyframe is set.
In order to make a Custom Speed on a path, you need to first, clear the default keyframing (on the right edge of the column, click on the disclosure triangle and select Reset Parameter). Then, set the position you want your object to start at and Set a keyframe. Then you can advance the playhead and move the Custom Speed control to position the object on the path.
HTH

HT6162 In control center on IOS7.1 flashlite is not working, camera not woking only the frontal camera the rear camera stay black

Hi i´m new in this IOS thing but i get a message in itunes of an update of IOS 7.0.6 to 7.1 so i updated but my phone stop working the camera just take 2 videos and the camera is not working, well at least the rear cam stay black the front cam works, and, in the control center the button of flashlite do not work i push the button like 4 times the LED do not turn on then i restart the iphone and now the button is disabled so is this a bug or just a faliure of the IOS update???

Welcome to the user to User Technical Support Forum provided by Apple
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414

HT4623 after installing ios7 my Iphone4 will not work

after installing ios7 my Iphone4 will not work

Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

Ios7 podcast playback speeds not working in Nissan Leaf

Similar Messages

Maybe you are looking for