IP Address reversed?
First thing - this is *not* a question about Reverse DNS.
I've recently replaced our router at home and since then our DNS is resolving one of our company's domain names incorrectly - specifically the IP address is being returned in reverse order.
So instead of getting aaa.bbb.ccc.ddd, I am getting ddd.ccc.bbb.aaa
This has only happened in this one location as far as I can tell, and is happening on both the Macs which we use at home. If I take the computer somewhere else, I get the correct IP address.
In Network Utility, doing a lookup for machinename.domainname.co.uk gives:
machinename.domainname.co.uk 86400 IN A 19.193.68.109
instead of 109.68.193.19
However if I go into terminal and dig machinename.domainname.co.uk, then I get the correct IP address.
My setup at home is a Belkin broadband router, connected to a Time Capsule which provides wired & wireless access to our home computers.
The domain is hosted on our company's LAN on a Mac Mini running Mac OS X Server 10.6.8.
Is that enough information?
Hope someone can help
Cheers
James
I should add that at some point I also replaced the neo-datasources.xml file with one from our development server.
Similar Messages
-
Absolute and relative addressing (Reverse Proxy)
Hi,
we want to use a Reverse Proxy Envirement with EP 6 SP15.
Are the standard links (e.g. navigation) from EP working with relative adressing?
sample:
Real address:
http://www.myserver.com/myapp/mypage.jsp
address on reverse proxy:
http://www.otherserver.com/some/other/url/help/index.jsp
Want to link to the origin page
http://www.myserver.com/myapp/help/index.jsp (origin)
over
http://www.otherserver.com/some/other/url/help/index.jsp
This means behind a reverse-proxy I have to address the page as follows:
../mypage.jsp
Got anyone experience with this envirement - and is it working?
Regards
Thomas
Message was edited by: Thomas SchillingHi Thomas,
I guess you will be using Apache as your Reverse Proxy?
Configure your Apache something like this:
My httpd.conf file looks like this:
<VirtualHost IPAddress:80>
Redirect / https://server.domain/
</VirtualHost>
I then have a ssl.conf file that looks like this:
<VirtualHost IPAddress:443>
***Lots of other entries***
ProxyPass /irj/ https://virtualhost/irj/
ProxyPassReverse /irj/ https://virtualhost/irj/
ProxyPass / https://virtualhost/
ProxyPass /webdynpro/ https://virtualhost/webdynpro/
</VirtualHost>
Now obviously edit these ProxyPass, and ProxyPassReverse to suit your needs.
This should help.
Regards
Ian -
ICloud email addresses are reversed
My husband and I have our iCloud email addresses reversed so when I send an iCloud email from my phone it says it is from him and the address is his iCloud address. On our phones under iCloud account, the other's address is listed and cannot be edited.
Go to icloud.com and log in.
*edit* You need to transition from MobileMe to iCloud first. If you haven't, go to me.com and log in. -
Address list error -- 5.7.1 Relaying not allowed
Hi,
We have setup the Java Messaging Server to send/recieve mails from a gateway. The inbound mail flow works perfectly but, the outbound mail flow has issues.
The outbound mails are not hitting the gateway. When checked the log for outbound mail, it displays the address list error - 5.7.1 Relaying not allowed for any domain i.e gmail.com, etc
version:
Sun Java(tm) System Messaging Server 6.3-5.02 (built Oct 12 2007; 32bit)
libimta.so 6.3-5.02 (built 17:15:31, Oct 12 2007; 32bit)
SunOS P1192FLPLN 5.9 Generic_118558-02 sun4u sparc SUNW,Sun-Fire
here is the log for reference...
=========================================================================
root@P1192FLPLN # /opt/SUNWmsgsr/sbin/imsimta test -rewrite -debug -source_channel=tcp_local [email protected] [email protected]
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
*** Debug output from initializing MM for submission:
17:09:37.43: Debug output enabled, system P1192FLPLN.extmail.xyz.com, process 3fbf.1, message enqueue routines version V6.3 compiled Oct 12 2007 17:15:38
17:09:37.43: mmc_winit('tcp_local','[email protected]','') called.
17:09:37.43: Address reversal invoked on [email protected], force reverse URL 1, capture 1
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.43: Rewrite: "$*", position 0, hash table -
17:09:37.43: Found: "$A$E$F$U%[email protected]"
17:09:37.43: Rewrite failed, not forward.
17:09:37.43: Rewrite: "$*", position 1, hash table -
17:09:37.43: Failed.
17:09:37.43: Rewrite: "$*", position 0, rewrite database -
17:09:37.43: Failed
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.43: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.43: Found: "$U%[email protected]"
17:09:37.43: New mailbox: "abhishek.sen".
17:09:37.43: New host: "extmail.xyz.com".
17:09:37.43: New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.43: New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.43: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.43: - found on channel l
17:09:37.43: Routelocal flag set; scanning for % and !
17:09:37.43: Checking reverse URL cache for: [email protected]
17:09:37.43: Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.48: Resulting URL: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49: mmc_open_url called to open ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected])), flags = 384
17:09:37.49: URL with quotes stripped: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49: LDAP URL identified
17:09:37.49: URL context #1 will be used
17:09:37.49: Performing URL search on: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.53: mmc_read_url result: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53: URL resolution returned: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53: mmc_read_url result: [preferredlanguage] en
17:09:37.53: URL resolution returned: [preferredlanguage] en
17:09:37.53: Attribute index: 0
17:09:37.53: LDAP URL produced preferred language en
17:09:37.53: mmc_read_url result: [mailmsgmaxblocks] 700
17:09:37.53: URL resolution returned: [mailmsgmaxblocks] 700
17:09:37.53: Attribute index: 0
17:09:37.53: LDAP URL produced blocklimit 700
17:09:37.53: mmc_read_url result: [mail] [email protected]
17:09:37.53: URL resolution returned: [mail] [email protected]
17:09:37.54: Attribute index: 0
17:09:37.54: LDAP URL produced address [email protected]
17:09:37.54: No more results to return
17:09:37.54: Override postmaster: [email protected]
17:09:37.54: Preferred language en
17:09:37.54: Content return block limit now 700
17:09:37.54: Mapped return address: [email protected]
17:09:37.54: from_access mapping check: ||MAIL|tcp_local|[email protected]|
17:09:37.54: Queue area size 73232902, temp area size 2067314
17:09:37.54: 18308225 blocks of effective free queue space available; setting disk limit accordingly.
17:09:37.54: 1033657 blocks of free temporary space available; setting disk limit accordingly.
17:09:37.54: - passed.
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.54: Rewrite: "$*", position 0, hash table -
17:09:37.54: Found: "$A$E$F$U%[email protected]"
17:09:37.54: Rewrite failed, not forward.
17:09:37.54: Rewrite: "$*", position 1, hash table -
17:09:37.54: Failed.
17:09:37.54: Rewrite: "$*", position 0, rewrite database -
17:09:37.54: Failed
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.54: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.54: Found: "$U%[email protected]"
17:09:37.54: New mailbox: "abhishek.sen".
17:09:37.54: New host: "extmail.xyz.com".
17:09:37.54: New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.56: New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.56: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.56: - found on channel l
17:09:37.56: Routelocal flag set; scanning for % and !
*** Debug output from rewriting a forward header address:
17:09:37.56: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.56: Rewrite: "$*", position 0, hash table -
17:09:37.56: Found: "$A$E$F$U%[email protected]"
17:09:37.57: Rewrite failed, not envelope.
17:09:37.57: Rewrite: "$*", position 1, hash table -
17:09:37.57: Failed.
17:09:37.57: Rewrite: "$*", position 0, rewrite database -
17:09:37.57: Failed
17:09:37.57: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.57: Rewrite: "xyz.com", position 0, hash table -
17:09:37.57: Failed.
17:09:37.57: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.59: Failed
17:09:37.59: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.59: Rewrite: "*.com", position 0, hash table -
17:09:37.59: Failed
17:09:37.59: Rewrite: ".com", position 0, hash table -
17:09:37.59: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.59: New mailbox: "bhanu.prasad".
17:09:37.59: New host: "xyz.com".
17:09:37.59: New route: "TCP-DAEMON".
17:09:37.59: New channel system: "TCP-DAEMON".
17:09:37.59: Looking up host "TCP-DAEMON".
17:09:37.60: - found on channel tcp_local
17:09:37.60: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.60: Rewrite: "$*", position 0, hash table -
17:09:37.60: Found: "$A$E$F$U%[email protected]"
17:09:37.60: Rewrite failed, not envelope.
17:09:37.60: Rewrite: "$*", position 1, hash table -
17:09:37.60: Failed.
17:09:37.60: Rewrite: "$*", position 0, rewrite database -
17:09:37.60: Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.61: Rewrite: "xyz.com", position 0, hash table -
17:09:37.61: Failed.
17:09:37.61: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.61: Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.61: Rewrite: "*.com", position 0, hash table -
17:09:37.61: Failed
17:09:37.61: Rewrite: ".com", position 0, hash table -
17:09:37.63: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.63: New mailbox: "bhanu.prasad".
17:09:37.63: New host: "xyz.com".
17:09:37.63: New route: "TCP-DAEMON".
17:09:37.63: New channel system: "TCP-DAEMON".
17:09:37.63: Looking up host "TCP-DAEMON".
17:09:37.63: - found on channel tcp_local
17:09:37.63: Rewrite rules result: [email protected]
17:09:37.63: Checking reverse URL cache for: [email protected]
17:09:37.63: Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.65: URL generation failed, status = 0
*** Debug output from rewriting a forward envelope address:
17:09:37.65: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.65: Rewrite: "$*", position 0, hash table -
17:09:37.65: Found: "$A$E$F$U%[email protected]"
17:09:37.65: Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.65: old state = not checked.
17:09:37.65: Domain check on xyz.com.
17:09:37.66: Could not add domain result 0 to cache for xyz.com.
17:09:37.66: new state = fail pending.
17:09:37.66: Rewrite failed due to prechannel mismatch.
17:09:37.66: Rewrite: "$*", position 1, hash table -
17:09:37.66: Failed.
17:09:37.66: Rewrite: "$*", position 0, rewrite database -
17:09:37.66: Failed
17:09:37.66: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.66: Rewrite: "xyz.com", position 0, hash table -
17:09:37.66: Failed.
17:09:37.67: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.67: Failed
17:09:37.67: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.67: Rewrite: "*.com", position 0, hash table -
17:09:37.67: Failed
17:09:37.67: Rewrite: ".com", position 0, hash table -
17:09:37.67: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.67: New mailbox: "bhanu.prasad".
17:09:37.67: New host: "xyz.com".
17:09:37.67: New route: "TCP-DAEMON".
17:09:37.69: New channel system: "TCP-DAEMON".
17:09:37.69: Looking up host "TCP-DAEMON".
17:09:37.69: - found on channel tcp_local
address channel = tcp_local
forward channel = tcp_local
channel description =
channel caption =
channel user filter =
dest channel filter =
source channel filter =
channel flags #0 = BIDIRECTIONAL SINGLE_SYSTEM IMMNONURGENT NOSERVICEALL channel flags #1 = SMTP_CRLF MX IDENTNONENUMERIC DEFAULT
channel flags #2 = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3 = LOGGING NORESTRICTED RETAINSECURITYMULTIPARTS
channel flags #4 = EIGHTNEGOTIATE HEADERKEEPORDER NOHEADERREAD RULES
channel flags #5 = TRUNCATESMTPLONGLINES
channel flags #6 = LOCALUSER REPORTNOTARY
channel flags #7 = SWITCHCHANNEL REMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8 = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9 = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALNONE NOTURN
defaulthost = extmail.xyz.com extmail.xyz.com
linelength = 998
addrsperfile = 99
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = tcp-daemon
channel queue 0 name = SMTP_POOL
channel queue 1 name = SMTP_POOL
channel queue 2 name = SMTP_POOL
channel queue 3 name = SMTP_POOL
channel after params =
channel daemon name = 10.8.51.126
channel user name =
urgentnotices = 1 2 4 7
normalnotices = 1 2 4 7
nonurgentnotices = 1 2 4 7
channel rightslist ids =
local behavior flags = %x0
expandchannel =
notificationchannel =
dispositionchannel =
tlsswitchchannel =
backward channel = tcp_local
unique identifier = [email protected]
header forward address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
header reverse address = [email protected]
envelope forw address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
envelope rev address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
name =
mbox = bhanu.prasad
Extracted address action list:
[email protected]
Extracted 733 address action list:
[email protected]
Address list expansion:
*** Debug output from alias expansion:
17:09:37.76: Inner expand, level = 0, mailbox = [email protected]
17:09:37.76: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.76: Rewrite: "$*", position 0, hash table -
17:09:37.76: Found: "$A$E$F$U%[email protected]"
17:09:37.76: Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.76: old state = not checked.
17:09:37.76: Domain check on xyz.com.
17:09:37.77: Could not add domain result 0 to cache for xyz.com.
17:09:37.77: new state = fail pending.
17:09:37.77: Rewrite failed due to prechannel mismatch.
17:09:37.77: Rewrite: "$*", position 1, hash table -
17:09:37.77: Failed.
17:09:37.77: Rewrite: "$*", position 0, rewrite database -
17:09:37.77: Failed
17:09:37.77: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.77: Rewrite: "xyz.com", position 0, hash table -
17:09:37.77: Failed.
17:09:37.79: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.79: Failed
17:09:37.79: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.79: Rewrite: "*.com", position 0, hash table -
17:09:37.79: Failed
17:09:37.79: Rewrite: ".com", position 0, hash table -
17:09:37.79: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.79: New mailbox: "bhanu.prasad".
17:09:37.79: New host: "xyz.com".
17:09:37.79: New route: "TCP-DAEMON".
17:09:37.80: New channel system: "TCP-DAEMON".
17:09:37.80: Looking up host "TCP-DAEMON".
17:09:37.80: - found on channel tcp_local
-13 expansion total.
*** Debug output from submitting an envelope address:
17:09:37.80: mmc_wadr(0x0017ae68,'[email protected]','[email protected]') called.
17:09:37.80: Copy estimate before address addition is 1
17:09:37.80: Parsing address [email protected]
17:09:37.80: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.80: Rewrite: "$*", position 0, hash table -
17:09:37.81: Found: "$A$E$F$U%[email protected]"
17:09:37.81: Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.81: old state = not checked.
17:09:37.81: Domain check on xyz.com.
17:09:37.81: Could not add domain result 0 to cache for xyz.com.
17:09:37.81: new state = fail pending.
17:09:37.81: Rewrite failed due to prechannel mismatch.
17:09:37.81: Rewrite: "$*", position 1, hash table -
17:09:37.83: Failed.
17:09:37.83: Rewrite: "$*", position 0, rewrite database -
17:09:37.83: Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
xyz.com", literal = "", tag = ""
17:09:37.83: Rewrite: "xyz.com", position 0, hash table -
17:09:37.83: Failed.
17:09:37.83: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.83: Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
.com", literal = "", tag = ""
17:09:37.83: Rewrite: "*.com", position 0, hash table -
17:09:37.84: Failed
17:09:37.84: Rewrite: ".com", position 0, hash table -
17:09:37.84: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.84: New mailbox: "bhanu.prasad".
17:09:37.84: New host: "xyz.com".
17:09:37.84: New route: "TCP-DAEMON".
17:09:37.84: New channel system: "TCP-DAEMON".
17:09:37.84: Looking up host "TCP-DAEMON".
17:09:37.84: - found on channel tcp_local
17:09:37.84: - adding address [email protected] to headers.
17:09:37.86: - orig_send_access mapping check: tcp_local|abhishek.sen@extm
ail.xyz.com|tcp_local|[email protected]
17:09:38.16: - failed.
17:09:38.16: Good address count 0 defer count 0
17:09:38.16: Copy estimate after address addition is 1
17:09:38.16: mmc_waend(0x0017ae68) called.
17:09:38.16: Copy estimate is 1
17:09:38.16: Queue area size 73232902, temp area size 2067288
17:09:38.16: 36616451 blocks of effective free queue space available; setting
disk limit accordingly.
17:09:38.16: 1033644 blocks of free temporary space available; setting disk li
mit accordingly.
Expanded address:
[email protected]
Submitted address list:
Address list error -- 5.7.1 Relaying not allowed: [email protected]
Submitted notifications list:
=========================================================================Do we have to make any changes on other config files except the imta.cnf and mappings file for inbound and outbound..
thanks for any help
Edited by: prasad0_0 on Jul 8, 2008 4:58 AMi have already setup the messaging server 6 months back.. followed the same procedure to route mails to a gateway..
made changes to the imta.cnf for outbound mail flow to the tcp_local and mappings file to accept inbound mail flow from the gateway. Its working perfectly on the older setup, but this now, have issues with new setup.
here is the imta.cnf file..
! IMTA configuration file
! part I : rewrite rules
! Domain Rewrite Rules.
! Uncomment this line to use domain rewrite rules
! from the configuration file instead of the domain database.
! Please refer to the iMS documentation for details.
!<IMTA_TABLE:domains.rules
! Rules to select local users
$* $A$E$F$U%[email protected]
P1192FLPLN.extmail.xyz.com $U%[email protected]
extmail.xyz.com $U%[email protected]
! ims-ms
.ims-ms-daemon $U%$H.ims-ms-daemon@ims-ms-daemon
! lmtp
!.lmtp $U%$H@lmtpcs-daemon
! lmtpn
!.lmtpn $U%$H@lmtpcn-daemon
! native
.native-daemon $U%$H.native-daemon@native-daemon
! pipe
.pipe-daemon $U%$H.pipe-daemon@pipe-daemon
! tcp_local
! Rules for top level internet domains
<IMTA_TABLE:internet.rules
! tcp_intranet
! Do mapping lookup for internal IP addresses
[] $E$R${INTERNAL_IP,$L}$U%[$L]@tcp_intranet-daemon
.extmail.xyz.com $U%$H.extmail.xyz.com@tcp_intranet-daemon
* $U%$&0.extmail.xyz.com
! reprocess
reprocess $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
reprocess.P1192FLPLN.extmail.xyz.com $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
! process
process $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
process.P1192FLPLN.extmail.xyz.com $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
! defragment
defragment $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
defragment.P1192FLPLN.extmail.xyz.com $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
! conversion
conversion $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
conversion.P1192FLPLN.extmail.xyz.com $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
! bitbucket
bitbucket $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
bitbucket.P1192FLPLN.extmail.xyz.com $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
! deleted
deleted-daemon $U%$H@deleted-daemon
.deleted-daemon $U%$H@deleted-daemon
! inactive
inactive-daemon $U%$H@inactive-daemon
.inactive-daemon $U%$H@inactive-daemon
! hold
hold-daemon $U%$H@hold-daemon
.hold-daemon $U%$H@hold-daemon
! part II : channel blocks
defaults notices 1 2 4 7 copywarnpost copysendpost postheadonly noswitchchannel immnonurgent maxjobs 7 logging defaulthost extmail.xyz.com extmail.xyz.com
! delivery channel to local /var/mail store
l subdirs 20 viaaliasrequired maxjobs 7
P1192FLPLN.extmail.xyz.com
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U+$S@$D
ims-ms-daemon
! native
native defragment subdirs 20 maxjobs 1
native-daemon
! pipe
pipe single defragment subdirs 20
pipe-daemon
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0 loopcheck daemon 10.8.51.126
tcp-daemon
! tcp_intranet
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL maytlsserver allowswitchchannel saslswitchchannel tcp_auth missingrecipientpolicy 4
tcp_intranet-daemon
! tcp_submit
tcp_submit submit smtp mx single_sys mustsaslserver maytlsserver missingrecipientpolicy 4
tcp_submit-daemon
! tcp_auth
tcp_auth smtp mx single_sys mustsaslserver missingrecipientpolicy 4
tcp_auth-daemon
! tcp_tas
tcp_tas smtp mx single_sys allowswitchchannel mustsaslserver maytlsserver deliveryflags 2
tcp_tas-daemon
! tcp_lmtpss (LMTP server - store)
!tcp_lmtpss lmtp flagtransfer
!tcp_lmtpss-daemon
! tcp_lmtpcs (LMTP client - store)
!tcp_lmtpcs defragment lmtp port 225 nomx single_sys subdirs 20 maxjobs 7 pool SMTP_POOL dequeue_removeroute
!lmtpcs-daemon
! reprocess
reprocess
reprocess-daemon
! process
process
process-daemon
! defragment
defragment
defragment-daemon
! conversion
conversion
conversion-daemon
! bitbucket
bitbucket
bitbucket-daemon
! deleted
deleted
deleted-daemon
! inactive
inactive
inactive-daemon
! hold
hold
hold-daemonand mappings file..
! MTA mappings file
! for access control and other table lookups
FROM_ACCESS
! Entries to block certain submissions normally would be inserted here,
! above the ntended-to-be-final entries that while permitting submission,
! merely disable any potential "vacation" effect.
! The following entries disable Sieve "vacation" action on lists sorts
! of addresses, as recommended by the Sieve "vacation" extension draft.
*|SMTP*|*|*|MAILER-DAEMON@*|* $!$Y
*|SMTP*|*|*|LISTSERVE*@|* $!$Y
*|SMTP*|*|*|majordomo@*|* $!$Y
*|SMTP*|*|*|*-request@*|* $!$Y
*|SMTP*|*|*|*-owner@*|* $!$Y
*|SMTP*|*|*|owner-*@*|* $!$Y
PORT_ACCESS
*|*|*|*|* $C$|INTERNAL_IP;$3|$Y$E
* $YEXTERNAL
INTERNAL_IP
$(10.8.55.49/24) $Y
$(10.8.51.125) $Y
$(10.8.51.126) $Y
127.0.0.1 $Y
* $N
ORIG_SEND_ACCESS
tcp_local|*|tcp_local|* $N$D30|Relaying$ not$ allowed
tcp_*|*|native|* $N
tcp_*|*|hold|* $N
tcp_*|*|pipe|* $N
tcp_*|*|ims-ms|* $N
! Block "external" submissions of explicitly source-routed "internal" addresses
tcp_local|*|tcp_intranet|@*:*.* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*$%*@* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*.*!*@* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|"*@*"@* $N$D30|Explicit$ routing$ not$ allowed
SEND_ACCESS
tcp_*|*|*|*@[127.*] $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@localhost.* $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.com $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.net $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.org $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.test $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.example $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.invalid $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.localhost $X5.1.2|$NBad$ destination$ system
<IMTA_TABLE:mappings.localewe are able to receive mails from the gateway, but when using uwc to send the mail, the mail doesnt hit the gateway. trying a telnet from the messaging server to the gateway, works perfectly.
thanks in advance. -
AddressBook and Calendar syncronization?!?
Gentlemen, please excuse me if this has been answered before, I have spend a couple of days googling for answers with not much luck.
Here is my issue. About a month ago, I purchased a Mac Mini Server with SLS, to use it as a family server. The idea was to have our own email, web server etc (which are all working fine), but also I wanted the server to act as a "central point" for user address book and calendar synchronization.
What I mean with that, is that I wanted a central repository of our address books and calendars. We do NOT need to share address books. Maybe we could use a shared calendar, but again, it is not something mandatory, for the time being all we need is to be able to duplicate each member's address books and calendars on the server and in our devices.
Devices to be used as clients:
- One iMac (obviously always connected to the server)
- One MacBook (obviously this is USUALLY connected to the server, but not always). This machine acts as my wife home computer and as my traveling computer.
- Two iPhones (obviously these are usually NOT connected to the server, but they eventually get connected at some time of the day)
Until now, I've been using MobileMe for address book and calendar syncronization and I was hoping that by having the server I could avoid paying $100 per year for that service. Unfortunately, so far, I am unable to use the server for that task.
What I have managed so far, is:
_On the iMac_,
AddressBook: I have duplicated all my address book entries to my account address book on the server. However, for the name of God, how can I keep them in sync? In other words, if I add a contact in my iMac address book, it doesn't get copied to the server address book. How can I do that automatically? I know one answer would be to use only the server address book, since this machine is always connected to the server, but that doesn't solve the problem, see below.
Calendar: I can't find any way to copy my calendar contents to the my account calendar on the server. I can see the two calendars in iCal, but when I enter an entry in the server calendar, it stays in the server calendar and is NOT reflected in my local calendar and vice versa. Again, for the iMac that's not an issue, I could use the server calendar only (provided I can export my current, local calendar entries and import them to the server calendar), but again that doesn't solve the problem, see below:
_On the MacBook and the iPhones_
AddressBook: Now here is where the problem is. If I take the MacBook on a trip and I add a couple of contacts in my address book on the laptop, how can I have them copied to my server address book? As far as I can tell, the only way is to manually copy them. Isn't there a way to do so automatically? Either when I am away (via the Internet, when I'll connect to the Internet) or even when I return back home? I can't always use the server address book when I am away, because I may not always be connected to the Internet, so I need to be able to enter a contact in my local address book, and I need to have it copied to my server address book automatically when I connect to the Internet. Just like I do now with MobileMe.
Calendar: Again, the same thing. I want to be able to add a calendar entry to my local calendar on the road, which will be copied to my server calendar when I connect to the Internet (or the LAN at home). Can that be done?
And of course, the same calendar or address book entries I entered in the MacBook (while on the road), should be reflected back to my iPhone calendar and addresbook, when I connect to the Internet, just like they do now using MobileMe.
Can this be done?!? If so, please tell me how.
Thank you for your attention.
P.S.: The server is available on the internet, with fixed IP etc. Connectivity to the server is NOT an issue.Move all your contacts and calendars to the server. Setup accounts on the server for groups in your family.
We have the following:
Husband
Wife
HusbandWife
Kids
All contacts are stored on server in the various accounts, and each person has access to what is appropriate. Husband/Wife have everything. Kids have less access, but there are three calendars in that section, Both, Child1 and Child2. My wife and I have our own stuff (like to-do's), but most of our appointments are in HusbandWife.
The kids have to put their homework in each week. We put in their other stuff. It shows up on their computers/ipads/iphones, etc.
The key is to get it all to the server. If you change something when you aren't connected it will synch up at the next connection.
Now - here is the tough part. You need perfect DNS to get all this working. Fully qualified public IP address, reverse lookup, etc. etc. with all the ports open. When you think you have it all setup with your ISP call Apple support and have them check it. Without the DNS you'll never get it all to work, particularly the wireless devices. -
Limited use of indexes in XE db?
I tried to use reverse key index in my XE database, but I cannot...
is this type of indexes disabled in XE db?
where can I found a list of all limitations in Express edition database?how did you exactly use it, no problems here,
SQL> desc test;
Name Null? Type
FULLNAME VARCHAR2(20)
ADDRESS VARCHAR2(20)
SQL> create index test_ndx on test (fullname) reverse;
Index created.
SQL> create index test_ndx2 on test (fullname, address) reverse;
Index created. -
Incorrect Sender value when 'mail' attribute is multivalued
hi,
i've just upgraded Sun messaging server 2005Q4 from IMS 5.2 and noted some behavioural difference in the reverse_url operations.
I've noted that reverse_url operations on the 'mail' attribute for ims5.2 seems to ignore subsequent values of this attribute if it's multivalued.
Sun Messaging 2005Q4, however, seems to have taken into account the multiple values of the 'mail' attribute.
This is resulting the mail's "From:" field to be using the subsequent values.
Setup
Account: mailtes1 (with multivalued 'mail' attribute)
mail: [email protected]
[email protected] (Not a configured mail domain handled by Sun messaging. Used by other applications)
mailhost: mailsit.portnet.com.sg (for Sun messaging 2005q4)
pnsasit1app1.portnet.com (for ims52)
test mails are sent to the same accounts.
Results of ./imsimta test -rewrite -debug mailtes1 on Sun Messaging 2005q4 as follows:
*** Debug output from rewriting a forward header address:
00:07:53.03: Rewriting: Mbox = "mailtes1", host = "portnet.com.sg", domain = "$*", literal = "", tag = ""
00:07:53.03: Rewrite: "$*", position 0, hash table -
00:07:53.03: Found: "$E$F$U%[email protected]$V$H"
00:07:53.03: Rewrite failed, not envelope.
00:07:53.03: Rewrite: "$*", position 1, hash table -
00:07:53.03: Failed.
00:07:53.03: Rewrite: "$*", position 0, rewrite database -
00:07:53.03: Failed
00:07:53.03: Rewriting: Mbox = "mailtes1", host = "portnet", domain = "portnet.com.sg", literal = "", tag = ""
00:07:53.03: Rewrite: "portnet.com.sg", position 0, hash table -
00:07:53.03: Found: "$U%[email protected]"
00:07:53.03: New mailbox: "mailtes1".
00:07:53.03: New host: "portnet.com.sg".
00:07:53.03: New route: "png1app1-mail.portnet.com.sg".
00:07:53.03: New channel system: "png1app1-mail.portnet.com.sg".
00:07:53.03: Looking up host "png1app1-mail.portnet.com.sg".
00:07:53.03: - found on channel l
00:07:53.03: Routelocal flag set; scanning for % and !
00:07:53.03: Rewrite rules result: [email protected]
00:07:53.03: Checking reverse URL cache for: [email protected]
00:07:53.03: Applying reverse URL pattern ldap:///$V?mail?sub?$Q to: [email protected]
00:07:53.05: Resulting URL: ldap:///l%3DSGSIN%2Co%3Dportnet.com?mail?sub?(|([email protected])([email protected]))
00:07:53.05: mmc_open_url called to open ldap:///l%3DSGSIN%2Co%3Dportnet.com?mail?sub?(|([email protected])(mailAlternateAddress=mailtes1@portnet.
com.sg)), flags = 384
00:07:53.05: URL with quotes stripped: ldap:///l%3DSGSIN%2Co%3Dportnet.com?mail?sub?(|([email protected])(mailAlternateAddress=mailtes1@portnet.
com.sg))
00:07:53.05: LDAP URL identified
00:07:53.05: URL context #1 will be used
00:07:53.05: Performing URL search on: ldap:///l%3DSGSIN%2Co%3Dportnet.com?mail?sub?(|([email protected])(mailAlternateAddress=mailtes1@portnet.
com.sg))
00:07:53.05: mmc_read_url result: [uid=mailtes1,ou=People,ou=ZZZ,ou=Customers, l=SGSIN, o=portnet.com]
00:07:53.05: URL resolution returned: [uid=mailtes1,ou=People,ou=ZZZ,ou=Customers, l=SGSIN, o=portnet.com]
00:07:53.05: mmc_read_url result: [mail] [email protected]
00:07:53.05: URL resolution returned: [mail] [email protected]
00:07:53.05: Attribute index: 16
00:07:53.05: LDAP URL produced address [email protected]
00:07:53.05: mmc_read_url result: [mail] [email protected]
00:07:53.05: URL resolution returned: [mail] [email protected]
00:07:53.05: Attribute index: 16
00:07:53.05: LDAP URL produced address [email protected]
00:07:53.05: No more result to return
*** Debug output from rewriting a forward envelope address:
00:07:53.05: Rewriting: Mbox = "mailtes1", host = "portnet.com.sg", domain = "$*", literal = "", tag = ""
00:07:53.05: Rewrite: "$*", position 0, hash table -
00:07:53.05: Found: "$E$F$U%[email protected]$V$H"
00:07:53.05: Match, pattern = "portnet.com.sg", current = "(*domaincheck*)"
00:07:53.05: old state = not checked.
00:07:53.05: Domain check on portnet.com.sg.
00:07:53.05: Added domain result 1 to cache for portnet.com.sg.
00:07:53.05: new state = succeeded.
00:07:53.05: New mailbox: "mailtes1".
00:07:53.05: New host: "portnet.com.sg".
00:07:53.05: New route: "png1app1-mail.portnet.com.sg".
00:07:53.05: New channel system: "png1app1-mail.portnet.com.sg".
00:07:53.05: Looking up host "png1app1-mail.portnet.com.sg".
00:07:53.05: - found on channel l
00:07:53.05: Routelocal flag set; scanning for % and !
forward channel = l
channel description =
channel user filter =
dest channel filter =
source channel filter =
channel flags #0 = BIDIRECTIONAL MULTIPLE IMMNONURGENT NOSERVICEALL
channel flags #1 = NOSMTP DEFAULT
channel flags #2 = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3 = LOGGING NOGREY NORESTRICTED RETAINSECURITYMULTIPARTS
channel flags #4 = EIGHTBIT NOHEADERTRIM NOHEADERREAD RULES
channel flags #5 = SLAVE_DEBUG
channel flags #6 = LOCALUSER REPORTNOTARY
channel flags #7 = NOSWITCHCHANNEL NOREMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8 = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9 = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALSYSTEM NOTURN
defaulthost = portnet.com.sg portnet.com.sg
linelength = 1023
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = png1app1-mail.portnet.com.sg
channel queue 0 name = LOCAL_POOL
channel queue 1 name = LOCAL_POOL
channel queue 2 name = LOCAL_POOL
channel queue 3 name = LOCAL_POOL
channel after params =
channel user name =
urgentnotices = 1 2 4 7
normalnotices = 1 2 4 7
nonurgentnotices = 1 2 4 7
channel rightslist ids =
local behavior flags = %x7
expandchannel =
notificationchannel =
dispositionchannel =
saslswitchchannel =
tlsswitchchannel =
backward channel = l
header To: address = [email protected]
header From: address = [email protected]
envelope To: address = [email protected] (route (png1app1-mail.portnet.com.sg,png1app1-mail.portnet.com.sg)) (host portnet.com.sg)
envelope From: address = [email protected]
name =
mbox = mailtes1
Results of ./imsimta test -rewrite -debug mailtes1 on ims52 as follows:
*** Debug output from rewriting a forward header address:
00:09:58.97: Rewriting: Mbox = "mailtes1", host = "portnet.com.sg", domain = "$*", literal = "", tag = ""
00:09:58.97: Rewrite: "$*", position 0, hash table -
00:09:58.97: Found: "$E$F$U%[email protected]$V$H"
00:09:58.97: Rewrite failed, not envelope.
00:09:58.97: Rewrite: "$*", position 1, hash table -
00:09:58.97: Failed.
00:09:58.97: Rewrite: "$*", position 0, rewrite database -
00:09:58.97: Failed
00:09:58.97: Rewriting: Mbox = "mailtes1", host = "portnet", domain = "portnet.com.sg", literal = "", tag = ""
00:09:58.97: Rewrite: "portnet.com.sg", position 0, hash table -
00:09:58.97: Found: "$U%[email protected]"
00:09:58.97: New mailbox: "mailtes1".
00:09:58.97: New host: "portnet.com.sg".
00:09:58.97: New route: "pnsasit1app1.portnet.com".
00:09:58.97: New channel system: "pnsasit1app1.portnet.com".
00:09:58.97: Looking up host "pnsasit1app1.portnet.com".
00:09:58.97: - found on channel l
00:09:58.97: Routelocal flag set; scanning for % and !
00:09:58.97: Rewrite rules result: [email protected]
00:09:58.97: Checking reverse URL cache for: [email protected]
00:09:58.97: Applying reverse URL pattern ldap:///$V?mail?sub?$Q to: [email protected]
00:09:58.99: Resulting URL: ldap:///l%3Dsgsin%2Co%3Dportnet.com?mail?sub?(|([email protected])([email protected]))
00:09:58.99: mmc_open_url called to open ldap:///l%3Dsgsin%2Co%3Dportnet.com?mail?sub?(|([email protected])(mailAlternateAddress=mailtes1@portnet.
com.sg)), flags = 256
00:09:58.99: URL with quotes stripped: ldap:///l%3Dsgsin%2Co%3Dportnet.com?mail?sub?(|([email protected])(mailAlternateAddress=mailtes1@portnet.
com.sg))
00:09:58.99: LDAP URL identified
00:09:58.99: URL context #1 will be used
00:09:58.99: Performing URL search on: ldap:///l%3Dsgsin%2Co%3Dportnet.com?mail?sub?(|([email protected])(mailAlternateAddress=mailtes1@portnet.
com.sg))
00:09:58.99: mmc_read_url result: [email protected]
00:09:58.99: URL resolution returned: [email protected]
forward channel = l
channel description =
channel user filter =
dest channel filter =
source channel filter =
channel flags #0 = BIDIRECTIONAL MULTIPLE IMMNONURGENT NOSERVICEALL
channel flags #1 = NOSMTP DEFAULT
channel flags #2 = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3 = LOGGING NOGREY NORESTRICTED RETAINSECURITYMULTIPARTS
channel flags #4 = EIGHTBIT NOHEADERTRIM NOHEADERREAD RULES
channel flags #5 = SLAVE_DEBUG
channel flags #6 = LOCALUSER REPORTHEADER
channel flags #7 = NOSWITCHCHANNEL NOREMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8 = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9 = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALSYSTEM NOTURN
defaulthost = portnet.com.sg portnet.com.sg
linelength = 1023
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = pnsasit1app1.portnet.com
channel queue 0 name = LOCAL_POOL
channel queue 1 name = LOCAL_POOL
channel queue 2 name = LOCAL_POOL
channel queue 3 name = LOCAL_POOL
channel after params =
channel user name =
urgentnotices = 1 2 4 7
normalnotices = 1 2 4 7
nonurgentnotices = 1 2 4 7
channel rightslist ids =
local behavior flags = %x7
backward channel = l
header To: address = [email protected]
header From: address = [email protected]
envelope To: address = [email protected] (route (pnsasit1app1.portnet.com,pnsasit1app1.portnet.com)) (host portnet.com.sg)
envelope From: address = [email protected]
name =
mbox = mailtes1
emails sent to mailtes1 using the Sun messaging 2005q4 service will be en-queued as '[email protected]' for sender but de-queued to mail store with '[email protected]' as sender.
09-Dec-2007 21:00:47.38 tcp_intranet ims-ms E 1 [email protected] rfc822;[email protected] mailtes1@ims-ms-daemon
09-Dec-2007 21:00:48.19 ims-ms D 1 [email protected] rfc822;[email protected] mailtes1@ims-ms-daemon
Physical message file will show '[email protected]' as sender.
Return-path: <[email protected]>
Received: from portnet.com.sg (pnsgsit1app2.portnet.com [10.106.65.36])
by mailsit.portnet.com.sg
(Sun Java System Messaging Server 6.2-8.04 (built Feb 28 2007))
with ESMTP id <[email protected]> for
[email protected]; Sun, 09 Dec 2007 21:00:47 +0800 (SGT)
Received: from [10.106.65.101] (Forwarded-For: 10.10.140.109)
by mailsit.portnet.com.sg (mshttpd); Sun, 09 Dec 2007 21:00:47 +0800
Date: Sun, 09 Dec 2007 21:00:47 +0800
From: [email protected]
Subject: test
To: [email protected]
Message-id: <[email protected]>
MIME-version: 1.0
X-Mailer: Sun Java(tm) System Messenger Express 6.2-8.04 (built Feb 28 2007)
Content-type: text/plain; charset=us-ascii
Content-language: en
Content-transfer-encoding: 7bit
Content-disposition: inline
X-Accept-Language: en
Priority: normal
Original-recipient: rfc822;[email protected]
test
Action tried.
1) Re-order values of mail attribute as follows:
mail: [email protected]
[email protected]
results from ./imsimta test -rewrite -debug mailtes1 on Sun messaging 2005q4:
*** Debug output from rewriting a forward header address:
00:21:45.57: Rewriting: Mbox = "mailtes1", host = "portnet.com.sg", domain = "$*", literal = "", tag = ""
00:21:45.57: Rewrite: "$*", position 0, hash table -
00:21:45.57: Found: "$A$E$F$U%[email protected]"
00:21:45.57: Rewrite failed, not envelope.
00:21:45.57: Rewrite: "$*", position 1, hash table -
00:21:45.57: Failed.
00:21:45.57: Rewrite: "$*", position 0, rewrite database -
00:21:45.57: Failed
00:21:45.57: Rewriting: Mbox = "mailtes1", host = "portnet", domain = "portnet.com.sg", literal = "", tag = ""
00:21:45.57: Rewrite: "portnet.com.sg", position 0, hash table -
00:21:45.57: Found: "$U%[email protected]"
00:21:45.57: New mailbox: "mailtes1".
00:21:45.57: New host: "portnet.com.sg".
00:21:45.57: New route: "mailsit.portnet.com.sg".
00:21:45.57: New channel system: "mailsit.portnet.com.sg".
00:21:45.57: Looking up host "mailsit.portnet.com.sg".
00:21:45.57: - found on channel l
00:21:45.57: Routelocal flag set; scanning for % and !
00:21:45.57: Rewrite rules result: [email protected]
00:21:45.57: Checking reverse URL cache for: [email protected]
00:21:45.57: Applying reverse URL pattern ldap:///$V?mail?sub?$Q to: [email protected]
00:21:45.58: Resulting URL: ldap:///l%3DSGSIN%2Co%3Dportnet.com?mail?sub?(|([email protected])([email protected]))
00:21:45.58: mmc_open_url called to open ldap:///l%3DSGSIN%2Co%3Dportnet.com?mail?sub?(|([email protected])(mailAlternateAddress=mailtes1@portnet.
com.sg)), flags = 384
00:21:45.58: URL with quotes stripped: ldap:///l%3DSGSIN%2Co%3Dportnet.com?mail?sub?(|([email protected])(mailAlternateAddress=mailtes1@portnet.
com.sg))
00:21:45.58: LDAP URL identified
00:21:45.58: URL context #1 will be used
00:21:45.58: Performing URL search on: ldap:///l%3DSGSIN%2Co%3Dportnet.com?mail?sub?(|([email protected])(mailAlternateAddress=mailtes1@portnet.
com.sg))
00:21:45.59: mmc_read_url result: [uid=mailtes1,ou=People,ou=PSA,ou=Customers, l=SGSIN, o=portnet.com]
00:21:45.59: URL resolution returned: [uid=mailtes1,ou=People,ou=PSA,ou=Customers, l=SGSIN, o=portnet.com]
00:21:45.59: mmc_read_url result: [mail] [email protected]
00:21:45.59: URL resolution returned: [mail] [email protected]
00:21:45.59: Attribute index: 16
00:21:45.59: LDAP URL produced address [email protected]
00:21:45.59: mmc_read_url result: [mail] [email protected]
00:21:45.59: URL resolution returned: [mail] [email protected]
00:21:45.59: Attribute index: 16
00:21:45.59: LDAP URL produced address [email protected]
00:21:45.59: No more result to return
*** Debug output from rewriting a forward envelope address:
00:21:45.59: Rewriting: Mbox = "mailtes1", host = "portnet.com.sg", domain = "$*", literal = "", tag = ""
00:21:45.59: Rewrite: "$*", position 0, hash table -
00:21:45.59: Found: "$A$E$F$U%[email protected]"
00:21:45.59: Match, pattern = "portnet.com.sg", current = "(*domaincheck*)"
00:21:45.59: old state = not checked.
00:21:45.59: Domain check on portnet.com.sg.
00:21:45.59: Added domain result 1 to cache for portnet.com.sg.
00:21:45.59: new state = succeeded.
00:21:45.59: New mailbox: "mailtes1".
00:21:45.59: New host: "portnet.com.sg".
00:21:45.59: New route: "mailsit.portnet.com.sg".
00:21:45.59: New channel system: "mailsit.portnet.com.sg".
00:21:45.59: Looking up host "mailsit.portnet.com.sg".
00:21:45.59: - found on channel l
00:21:45.59: Routelocal flag set; scanning for % and !
forward channel = l
channel description =
channel user filter =
dest channel filter =
source channel filter =
channel flags #0 = BIDIRECTIONAL MULTIPLE IMMNONURGENT NOSERVICEALL
channel flags #1 = NOSMTP DEFAULT
channel flags #2 = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3 = LOGGING NOGREY NORESTRICTED RETAINSECURITYMULTIPARTS
channel flags #4 = EIGHTBIT NOHEADERTRIM NOHEADERREAD RULES
channel flags #5 = MASTER_DEBUG SLAVE_DEBUG
channel flags #6 = LOCALUSER REPORTNOTARY
channel flags #7 = NOSWITCHCHANNEL NOREMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8 = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9 = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALSYSTEM NOTURN
defaulthost = portnet.com.sg portnet.com.sg
linelength = 1023
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = mailsit.portnet.com.sg
channel queue 0 name = LOCAL_POOL
channel queue 1 name = LOCAL_POOL
channel queue 2 name = LOCAL_POOL
channel queue 3 name = LOCAL_POOL
channel after params =
channel user name =
urgentnotices = 1 2 4 7
normalnotices = 1 2 4 7
nonurgentnotices = 1 2 4 7
channel rightslist ids =
local behavior flags = %x7
expandchannel =
notificationchannel =
dispositionchannel =
saslswitchchannel =
tlsswitchchannel =
backward channel = l
header To: address = [email protected]
header From: address = [email protected]
envelope To: address = [email protected] (route (mailsit.portnet.com.sg,mailsit.portnet.com.sg)) (host portnet.com.sg)
envelope From: address = [email protected]
name =
mbox = mailtes1
emails sent to mailtes1 using the Sun messaging 2005q4 service will be en-queued as '[email protected]' for sender and de-queued to mail store with '[email protected]' as sender.
10-Dec-2007 00:20:00.88 tcp_intranet ims-ms E 1 [email protected] rfc822;[email protected] mailtes1@ims-ms-daemon
10-Dec-2007 00:20:01.63 ims-ms D 1 [email protected] rfc822;[email protected] mailtes1@ims-ms-daemon
Physical message file will show '[email protected]' as sender.
But this time the recipient is '[email protected]'
Return-path: <[email protected]>
Received: from portnet.com.sg (pnsgsit1app2.portnet.com [10.106.65.36])
by mailsit.portnet.com.sg
(Sun Java System Messaging Server 6.2-8.04 (built Feb 28 2007))
with ESMTP id <[email protected]> for
[email protected]; Mon, 10 Dec 2007 00:20:00 +0800 (SGT)
Received: from [10.106.65.101] (Forwarded-For: 10.10.140.109)
by mailsit.portnet.com.sg (mshttpd); Mon, 10 Dec 2007 00:20:00 +0800
Date: Mon, 10 Dec 2007 00:20:00 +0800
From: [email protected]
Subject: test mail from ims62
To: [email protected]
Message-id: <[email protected]>
MIME-version: 1.0
X-Mailer: Sun Java(tm) System Messenger Express 6.2-8.04 (built Feb 28 2007)
Content-type: text/plain; charset=us-ascii
Content-language: en
Content-transfer-encoding: 7bit
Content-disposition: inline
X-Accept-Language: en
Priority: normal
Original-recipient: rfc822;[email protected]
test
Questions:
1) How do i retain the functionality of using 1st value of the mail attribute as the address to be used?
I need the address reversing to retain '@portnet.com.sg' value.
2) I've not encountered the same problem when using ims52.
Is there a functional diffences here?Hi Shane,
Thank you for the reply.
We tried adding a mailequivalentaddress attribute, eg [email protected] but the From field still have the value from the mail attribute, eg [email protected]. Do we still need to configure anything to make this to work?
Besides we tried another option by doing the following:
a. Changing the following lines in options.dat file:
REVERSE_URL=ldap:///$V?mail?sub?$Q
to
REVERSE_URL=ldap:///$V$N?sub?$R
b. We ensure that '@portnet.com.sg' is the 1st value
c. adding a 'noreverse' keyword for the 'ims-ms' channel
And it works without the need for the mailequivalentaddress, is this a proper implementation?
any implications with putting 'noreverse' for ims-ms channel?
We're now considering changing of primary address attribute used.
Need your advise on the following:
1) Please advise how go about configuring another attribute to store the primary address.
2) Can we use mailAlternateAddress as the new primary address attribute?
If a totally new attribute is needed, please advise on the requirements for the creation of this attribute to be usable by Sun Messaging 2005Q4.
This change was mentioned in the administration guide.
Chapter 9 The Direct LDAP Algorithm and Implementation
Seeding the Reversal Cache
Next the primary address and any aliases attached to the user entry are considered. This information is used to seed the address reversal cache. It plays no part in the current address translation process. First, the primary address, personal name, recipient limit, recipient cutoff, and source block limit attributes are considered. The primary address is normally stored in the �mail� attribute; another attribute can be specified by setting the LDAP_PRIMARY_ADDRESS MTA option appropriately. (The primary address reverses to itself, of course.) There is no default attribute for any of the other attributes. If you want to use them, you must specify them with the LDAP_PERSONAL_NAME, (see Vacation Autoreply Attributes) LDAP_RECIPIENTLIMIT, LDAP_RECIPIENTCUTOFF, (see Limiting Message Recipients) and LDAP_SOURCEBLOCKLIMIT (see Specifying Absolute Message Size Limits) MTA options. The corresponding domain-level recipient limit, recipient cutoff, and source block limit attributes are also considered at this point. User-level settings completely override any domain-level setting.
Next, any secondary addresses are considered and a cache entry is made for each one. There are two sorts of secondary addresses: Those that undergo address reversal and those that do not. Both must be considered in order to properly seed the address reversal cache because of the need to check for message capture requests in all cases.
Secondary addresses that undergo reversal are normally stored in the mailAlternateAddress attribute. Another attribute can be specified by setting the LDAP_ALIAS_ADDRESSES MTA option. Secondary addresses that do not undergo reversal are normally stored in the mailEquivalentAddress attribute. Another attribute can be specified with the LDAP_EQUIVALENCE_ADDRESSES MTA option.
Edited by: sheeyong on Dec 10, 2007 5:25 AM -
The member of the Postmaster group, [email protected] gets email when it's sent to [email protected] (an automatically created alternate address).
But mail sent to [email protected] doesn't get sent to me...
This domain's users receive e-mail at [email protected] rather than [email protected], via associateddomain and sunpreferreddomain.
The postmaster's mail attribute was changed to be [email protected] from [email protected] - but either did not work. The base dn however remains "that.the.otter.com."
adding another alternate address (additional to postmast) as [email protected] (with the mail attribute in either state mentioned above) also resulted in:
Address list error -- 5.1.1 unknown or illegal user: [email protected]
# /opt/SUNWmsgsr/sbin/imsimta version
Sun Java(tm) System Messaging Server 6.3-5.02 (built Oct 12 2007; 32bit)
libimta.so 6.3-5.02 (built 17:09:30, Oct 12 2007; 32bit)
SunOS this 5.10 Generic_120012-14 i86pc i386 i86pc
here's the rewrite test debug:
# ./test-rewrte
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
*** Debug output from initializing MM for submission:
22:02:19.46: Debug output enabled, system this.that.the.otter.com, process 3c55.1, message enqueue routines version V6.3 compiled Oct 12 2007 17:09:36
22:02:19.46: mmc_winit('l','[email protected]','[email protected]') called.
22:02:19.46: address reversal invoked on [email protected], force reverse URL 1, capture 1
22:02:19.46: Rewriting: Mbox = "postmaster", host = "this.that.the.otter.com", domain = "$*", literal = "", tag = ""
22:02:19.46: Rewrite: "$*", position 0, hash table -
22:02:19.46: Found: "$A$E$F$U%[email protected]"
22:02:19.46: Rewrite failed, not forward.
22:02:19.46: Rewrite: "$*", position 1, hash table -
22:02:19.46: Failed.
22:02:19.46: Rewrite: "$*", position 0, rewrite database -
22:02:19.46: Failed
22:02:19.46: Rewriting: Mbox = "postmaster", host = "this", domain = "this.that.the.otter.com", literal = "", tag = ""
22:02:19.46: Rewrite: "this.that.the.otter.com", position 0, hash table -
22:02:19.46: Found: "$U%[email protected]"
22:02:19.46: New mailbox: "postmaster".
22:02:19.46: New host: "this.that.the.otter.com".
22:02:19.46: New route: "this.that.the.otter.com".
22:02:19.46: New channel system: "this.that.the.otter.com".
22:02:19.46: Looking up host "this.that.the.otter.com".
22:02:19.46: - found on channel l
22:02:19.46: Routelocal flag set; scanning for % and !
22:02:19.46: Checking reverse URL cache for: [email protected]
22:02:19.46: Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
22:02:19.47: Resulting URL: ldap:///o%3Dthat.the.otter.com%2Co%3Disp?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,
mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
22:02:19.47: mmc_open_url called to open ldap:///o%3Dthat.the.otter.com%2Co%3Disp?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,
mailequivalentaddress?sub?(|([email protected])([email protected])([email protected])), flags = 384
22:02:19.47: URL with quotes stripped: ldap:///o%3Dthat.the.otter.com%2Co%3Disp?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,
mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
22:02:19.47: LDAP URL identified
22:02:19.47: URL context #1 will be used
22:02:19.47: Performing URL search on: ldap:///o%3Dthat.the.otter.com%2Co%3Disp?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,
mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
22:02:19.48: mmc_read_url result: [cn=Postmaster,ou=Groups,o=that.the.otter.com,o=isp]
22:02:19.48: URL resolution returned: [cn=Postmaster,ou=Groups,o=that.the.otter.com,o=isp]
22:02:19.48: mmc_read_url result: [mail] [email protected]
22:02:19.48: URL resolution returned: [mail] [email protected]
22:02:19.48: Attribute index: 0
22:02:19.48: LDAP URL produced address [email protected]
22:02:19.48: mmc_read_url result: [mailalternateaddress] [email protected]
22:02:19.48: URL resolution returned: [mailalternateaddress] [email protected]
22:02:19.48: Attribute index: 0
22:02:19.48: Alternate address [email protected]
22:02:19.48: No more results to return
22:02:19.48: Override postmaster: [email protected]
22:02:19.48: Mapped return address: [email protected]
22:02:19.48: from_access mapping check: ||MAIL|l|[email protected]|
22:02:19.48: Queue area size 130679556, temp area size 1015086
22:02:19.48: 32669889 blocks of effective free queue space available; setting disk limit accordingly.
22:02:19.48: 507543 blocks of free temporary space available; setting disk limit accordingly.
22:02:19.48: - passed.
22:02:19.48: Rewriting: Mbox = "postmaster", host = "this.that.the.otter.com", domain = "$*", literal = "", tag = ""
22:02:19.48: Rewrite: "$*", position 0, hash table -
22:02:19.48: Found: "$A$E$F$U%[email protected]"
22:02:19.48: Rewrite failed, not forward.
22:02:19.48: Rewrite: "$*", position 1, hash table -
22:02:19.48: Failed.
22:02:19.48: Rewrite: "$*", position 0, rewrite database -
22:02:19.48: Failed
22:02:19.48: Rewriting: Mbox = "postmaster", host = "this", domain = "this.that.the.otter.com", literal = "", tag = ""
22:02:19.48: Rewrite: "this.that.the.otter.com", position 0, hash table -
22:02:19.48: Found: "$U%[email protected]"
22:02:19.48: New mailbox: "postmaster".
22:02:19.48: New host: "this.that.the.otter.com".
22:02:19.48: New route: "this.that.the.otter.com".
22:02:19.48: New channel system: "this.that.the.otter.com".
22:02:19.48: Looking up host "this.that.the.otter.com".
22:02:19.48: - found on channel l
22:02:19.48: Routelocal flag set; scanning for % and !
*** Debug output from rewriting a forward header address:
22:02:19.48: Rewriting: Mbox = "postmaster", host = "this.that.the.otter.com", domain = "$*", literal = "", tag = ""
22:02:19.48: Rewrite: "$*", position 0, hash table -
22:02:19.48: Found: "$A$E$F$U%[email protected]"
22:02:19.48: Rewrite failed, not envelope.
22:02:19.48: Rewrite: "$*", position 1, hash table -
22:02:19.48: Failed.
22:02:19.48: Rewrite: "$*", position 0, rewrite database -
22:02:19.48: Failed
22:02:19.48: Rewriting: Mbox = "postmaster", host = "this", domain = "this.that.the.otter.com", literal = "", tag = ""
22:02:19.48: Rewrite: "this.that.the.otter.com", position 0, hash table -
22:02:19.48: Found: "$U%[email protected]"
22:02:19.48: New mailbox: "postmaster".
22:02:19.48: New host: "this.that.the.otter.com".
22:02:19.49: New route: "this.that.the.otter.com".
22:02:19.49: New channel system: "this.that.the.otter.com".
22:02:19.49: Looking up host "this.that.the.otter.com".
22:02:19.49: - found on channel l
22:02:19.49: Routelocal flag set; scanning for % and !
22:02:19.49: Rewriting: Mbox = "postmaster", host = "this.that.the.otter.com", domain = "$*", literal = "", tag = ""
22:02:19.49: Rewrite: "$*", position 0, hash table -
22:02:19.49: Found: "$A$E$F$U%[email protected]"
22:02:19.49: Rewrite failed, not envelope.
22:02:19.49: Rewrite: "$*", position 1, hash table -
22:02:19.49: Failed.
22:02:19.49: Rewrite: "$*", position 0, rewrite database -
22:02:19.49: Failed
22:02:19.49: Rewriting: Mbox = "postmaster", host = "this", domain = "this.that.the.otter.com", literal = "", tag = ""
22:02:19.49: Rewrite: "this.that.the.otter.com", position 0, hash table -
22:02:19.49: Found: "$U%[email protected]"
22:02:19.49: New mailbox: "postmaster".
22:02:19.49: New host: "this.that.the.otter.com".
22:02:19.49: New route: "this.that.the.otter.com".
22:02:19.49: New channel system: "this.that.the.otter.com".
22:02:19.49: Looking up host "this.that.the.otter.com".
22:02:19.49: - found on channel l
22:02:19.49: Routelocal flag set; scanning for % and !
22:02:19.49: Rewrite rules result: [email protected]
22:02:19.49: Checking reverse URL cache for: [email protected]
22:02:19.49: Found in cache, result: <[email protected]>
*** Debug output from rewriting a forward envelope address:
22:02:19.49: Rewriting: Mbox = "postmaster", host = "this.that.the.otter.com", domain = "$*", literal = "", tag = ""
22:02:19.49: Rewrite: "$*", position 0, hash table -
22:02:19.49: Found: "$A$E$F$U%[email protected]"
22:02:19.49: Match, pattern = "this.that.the.otter.com", current = "(*domaincheck*)"
22:02:19.49: old state = not checked.
22:02:19.49: Domain check on this.that.the.otter.com.
22:02:19.49: Added domain result 1 to cache for this.that.the.otter.com.
22:02:19.49: new state = succeeded.
22:02:19.49: New mailbox: "postmaster".
22:02:19.49: New host: "this.that.the.otter.com".
22:02:19.49: New route: "this.that.the.otter.com".
22:02:19.49: New channel system: "this.that.the.otter.com".
22:02:19.49: Looking up host "this.that.the.otter.com".
22:02:19.49: - found on channel l
22:02:19.49: Routelocal flag set; scanning for % and !
address channel = l
forward channel = l
channel description =
channel caption =
channel user filter =
dest channel filter =
source channel filter =
channel flags #0 = BIDIRECTIONAL MULTIPLE IMMNONURGENT NOSERVICEALL
channel flags #1 = NOSMTP DEFAULT
channel flags #2 = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3 = LOGGING NORESTRICTED RETAINSECURITYMULTIPARTS
channel flags #4 = EIGHTBIT HEADERKEEPORDER NOHEADERREAD RULES
channel flags #5 = TRUNCATESMTPLONGLINES
channel flags #6 = LOCALUSER REPORTNOTARY
channel flags #7 = NOSWITCHCHANNEL NOREMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8 = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9 = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALSYSTEM NOTURN
defaulthost = that.the.otter.com that.the.otter.com
linelength = 1023
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = this.that.the.otter.com
channel after params =
channel user name =
urgentnotices =
normalnotices =
nonurgentnotices =
channel rightslist ids =
local behavior flags = %x7
expandchannel =
notificationchannel =
dispositionchannel =
saslswitchchannel =
tlsswitchchannel =
backward channel = l
unique identifier = [email protected]
header forward address = [email protected] (route (this.that.the.otter.com,this.that.the.otter.com)) (host this.that.the.otter.com)
header reverse address = [email protected]
envelope forw address = [email protected] (route (this.that.the.otter.com,this.that.the.otter.com)) (host this.that.the.otter.com)
envelope rev address = [email protected] (route (this.that.the.otter.com,this.that.the.otter.com)) (host this.that.the.otter.com)
name =
mbox = postmaster
Extracted address action list:
[email protected]
Extracted 733 address action list:
[email protected]
address list expansion:
*** Debug output from alias expansion:
22:02:19.49: Inner expand, level = 0, mailbox = [email protected]
22:02:19.49: Rewriting: Mbox = "postmaster", host = "this.that.the.otter.com", domain = "$*", literal = "", tag = ""
22:02:19.49: Rewrite: "$*", position 0, hash table -
22:02:19.49: Found: "$A$E$F$U%[email protected]"
22:02:19.49: Match, pattern = "this.that.the.otter.com", current = "(*domaincheck*)"
22:02:19.49: old state = not checked.
22:02:19.49: Using result 1 from domain match cache.
22:02:19.49: new state = succeeded.
22:02:19.49: New mailbox: "postmaster".
22:02:19.49: New host: "this.that.the.otter.com".
22:02:19.49: New route: "this.that.the.otter.com".
22:02:19.49: New channel system: "this.that.the.otter.com".
22:02:19.49: Looking up host "this.that.the.otter.com".
22:02:19.49: - found on channel l
22:02:19.49: Routelocal flag set; scanning for % and !
22:02:19.49: Reparsed mailbox: postmaster
22:02:19.49: Reparsed host: this.that.the.otter.com
22:02:19.49: Variant #1 = [email protected]
22:02:19.49: Variant #2 = *@this.that.the.otter.com
22:02:19.49: Variant #3 = postmaster
22:02:19.49: Alias magic value 8764
22:02:19.49: Initial pool address: postmast
22:02:19.49: Inner expand, level = 1, mailbox = postmast
22:02:19.49: Rewriting: Mbox = "postmast", host = "that.the.otter.com", domain = "$*", literal = "", tag = ""
22:02:19.49: Rewrite: "$*", position 0, hash table -
22:02:19.49: Found: "$A$E$F$U%[email protected]"
22:02:19.49: Match, pattern = "that.the.otter.com", current = "(*domaincheck*)"
22:02:19.49: old state = not checked.
22:02:19.49: Domain check on that.the.otter.com.
22:02:19.49: Added domain result 1 to cache for that.the.otter.com.
22:02:19.49: new state = succeeded.
22:02:19.49: New mailbox: "postmast".
22:02:19.49: New host: "that.the.otter.com".
22:02:19.49: New route: "this.that.the.otter.com".
22:02:19.49: New channel system: "this.that.the.otter.com".
22:02:19.49: Looking up host "this.that.the.otter.com".
22:02:19.49: - found on channel l
22:02:19.49: Routelocal flag set; scanning for % and !
22:02:19.49: Reparsed mailbox: postmast
22:02:19.49: Reparsed host: that.the.otter.com
22:02:19.49: Variant #1 = [email protected]
22:02:19.49: Variant #2 = *@that.the.otter.com
22:02:19.49: Alias magic value 8764
22:02:19.49: LDAP URL template identified
22:02:19.49: URL determined to be: ldap:///o%3Dthat.the.otter.com%2Co%3Disp?*?sub?(|([email protected])(mailAlternateaddress=
[email protected])([email protected]))
22:02:19.49: URL context #1 will be used
22:02:19.49: Performing URL search on: ldap:///o%3Dthat.the.otter.com%2Co%3Disp?objectclass,inetuserstatus,mailuserstatus,inetMailGroupStatus,
uid,preferredLanguage,mailRoutingaddress,mailMsgMaxBlocks,mail,mailAlternateaddress,
mailEquivalentaddress,mailDeliveryOption,vacationStartDate,vacationEndDate,mailConversionTag,mailhost,mailQuota,
mailMsgQuota,mailProgramDeliveryInfo,mailDeliveryFileURL,mailDeliveryFile,
mailAutoReplyMode,mailAutoReplySubject,mailAutoReplyText,mailAutoReplyTextInternal,mailAutoReplyTimeOut,
mailSieveRultesource,mailForwardingaddress,mailDeferprocessing,mgrpMsgRejectAction,
mgrpRejectText,mgrpMsgRejectText,mgrpBroadcasterPolicy,mgrpDisallowedBroadcaster,
mgrpAllowedBroadcaster,mgrpDisallowedDomain,mgrpAllowedDomain,mgrpMsgMaxSize,mgrpAuthPassword,
mgrpModerator,mgrpDeliverTo,memberURL,UniqueMember,mgrpRFC822MailMember,rfc822MailMember,
mgrpErrorsTo,mgrpAddHeader,mgrpRemoveHeader,mgrpMsgPrefixText,mgrpMsgSuffixText,
mgmanMemberVisibility,expandable?sub?(|([email protected])(mailAlternateaddress=postm22:02:19.49: Search succeeded but 0 entries returned
22:02:19.49: No matching entries were found that were valid
22:02:19.49: Status for this address = 0
[email protected]
1 expansion total.
*** Debug output from submitting an envelope address:
22:02:19.49: mmc_wadr(0x08102850,'[email protected]','[email protected]') called.
22:02:19.49: Copy estimate before address addition is 1
22:02:19.49: Parsing address [email protected]
22:02:19.49: Rewriting: Mbox = "postmaster", host = "this.that.the.otter.com", domain = "$*", literal = "", tag = ""
22:02:19.49: Rewrite: "$*", position 0, hash table -
22:02:19.49: Found: "$A$E$F$U%[email protected]"
22:02:19.49: Match, pattern = "this.that.the.otter.com", current = "(*domaincheck*)"
22:02:19.49: old state = not checked.
22:02:19.49: Using result 1 from domain match cache.
22:02:19.49: new state = succeeded.
22:02:19.49: New mailbox: "postmaster".
22:02:19.49: New host: "this.that.the.otter.com".
22:02:19.49: New route: "this.that.the.otter.com".
22:02:19.49: New channel system: "this.that.the.otter.com".
22:02:19.49: Looking up host "this.that.the.otter.com".
22:02:19.49: - found on channel l
22:02:19.49: Routelocal flag set; scanning for % and !
22:02:19.49: address [email protected] requires local processing.
22:02:19.49: Variant #1 = [email protected]
22:02:19.49: Variant #2 = *@this.that.the.otter.com
22:02:19.49: Variant #3 = postmaster
22:02:19.49: Alias magic value 8764
22:02:19.49: Checking for [email protected] in the system alias file
22:02:19.49: - system alias file match for [email protected]
22:02:19.49: Initial pool address: postmast
22:02:19.49: - postmast
22:02:19.49: Parsing address postmast
22:02:19.49: Rewriting: Mbox = "postmast", host = "that.the.otter.com", domain = "$*", literal = "", tag = ""
22:02:19.49: Rewrite: "$*", position 0, hash table -
22:02:19.49: Found: "$A$E$F$U%[email protected]"
22:02:19.49: Match, pattern = "that.the.otter.com", current = "(*domaincheck*)"
22:02:19.49: old state = not checked.
22:02:19.49: Using result 1 from domain match cache.
22:02:19.49: new state = succeeded.
22:02:19.49: New mailbox: "postmast".
22:02:19.49: New host: "that.the.otter.com".
22:02:19.49: New route: "this.that.the.otter.com".
22:02:19.49: New channel system: "this.that.the.otter.com".
22:02:19.49: Looking up host "this.that.the.otter.com".
22:02:19.49: - found on channel l
22:02:19.50: Routelocal flag set; scanning for % and !
22:02:19.50: address [email protected] requirthat local processing.
22:02:19.50: Variant #1 = [email protected]
22:02:19.50: Variant #2 = *@that.the.otter.com
22:02:19.50: Alias magic value 8764
22:02:19.50: Checking for [email protected] in the system alias file
22:02:19.50: - not found
22:02:19.50: Checking for *@that.the.otter.com in the system alias file
22:02:19.50: - not found
22:02:19.50: Checking [email protected] with URL template ldap:///$V?*?sub?$R
22:02:19.50: LDAP URL template identified
22:02:19.50: URL determined to be: ldap:///o%3Dthat.the.otter.com%2Co%3Disp?*?sub?(|([email protected])(mailAlternateaddress=
[email protected])([email protected]))
22:02:19.50: URL context #1 will be used
22:02:19.50: Performing URL search on: ldap:///o%3Dthat.the.otter.com%2Co%3Disp?objectclass,inetuserstatus,mailuserstatus,inetMailGroupStatus,
uid,preferredLanguage,mailRoutingaddress,mailMsgMaxBlocks,mail,mailAlternateaddress,mailEquivalentaddress,
mailDeliveryOption,vacationStartDate,vacationEndDate,
mailConversionTag,mailhost,mailQuota,mailMsgQuota,mailProgramDeliveryInfo,mailDeliveryFileURL,
mailDeliveryFile,mailAutoReplyMode,mailAutoReplySubject,mailAutoReplyText,mailAutoReplyTextInternal,
mailAutoReplyTimeOut,mailSieveRultesource,mailForwardingaddress,
mailDeferprocessing,mgrpMsgRejectAction,mgrpRejectText,mgrpMsgRejectText,mgrpBroadcasterPolicy,
mgrpDisallowedBroadcaster,mgrpAllowedBroadcaster,mgrpDisallowedDomain,mgrpAllowedDomain,
mgrpMsgMaxSize,mgrpAuthPassword,mgrpModerator,mgrpDeliverTo,memberURL,
UniqueMember,mgrpRFC822MailMember,rfc822MailMember,mgrpErrorsTo,mgrpAddHeader,
mgrpRemoveHeader,mgrpMsgPrefixText,mgrpMsgSuffixText,mgmanMemberVisibility,
expandable?sub?(|([email protected])(mailAlternateaddress=postm22:02:19.50: Search succeeded but 0 entries returned
22:02:19.50: No matching entries were found that were valid
22:02:19.50: Status for this address = 0
22:02:19.50: - orig_send_acces mapping check: l|[email protected]|l|[email protected]
22:02:19.50: - passed.
22:02:19.50: - send_acces mapping check: l|[email protected]|l|[email protected]
22:02:19.50: - passed.
22:02:19.50: - user postmast unknown.
22:02:19.50: mmc_wnadr(0x08102850,'[email protected]','[email protected]','[email protected]','') called.
22:02:19.50: Cancelling DSNs that were created
22:02:19.50: - adding address [email protected] to headers.
22:02:19.50: Good address count 0 defer count 0
22:02:19.50: Copy estimate after address addition is 1
22:02:19.50: Cancelling DSNs that were created22:02:19.50: mmc_waend(0x08102850) called.
22:02:19.50: Copy estimate is 1
22:02:19.50: Queue area size 130679556, temp area size 998674
22:02:19.50: 65339778 blocks of effective free queue space available; setting disk limit accordingly.
22:02:19.50: 499337 blocks of free temporary space available; setting disk limit accordingly.
Expanded address:
[email protected]
Submitted address list:
address list error -- 5.1.1 unknown or illegal user: [email protected]
Submitted notifications list:
what's postmast for?From the debug output it appears the following is happening:
22:02:19.49: Checking for [email protected] in the system alias file
22:02:19.49: - system alias file match for [email protected]
22:02:19.49: Initial pool address: postmast
22:02:19.49: - postmast
=> Match is being found in the /opt/SUNWmsgsr/config/aliases file for [email protected], this points at 'postmast'
22:02:19.50: URL determined to be: ldap:///o%3Dthat.the.otter.com%2Co%3Disp?*?sub?(|(mail=[email protected])(mailAlternateaddress=
[email protected])(mailEquivalentaddress=[email protected]))
22:02:19.50: Search succeeded but 0 entries returned
22:02:19.50: No matching entries were found that were valid
=> A lookup is being performed for postmast@(default domain) i.e. [email protected] which fails
So you need to fix either the aliases file or provision an account with [email protected]
Regards,
Shane. -
I work for a small company that only has three machines; one Mac and two PCs. Currently we're using gmail as our email provider.
Long story short, we bought an all-in-one printer that has a scan to email feature. However, the printer only provides "Login/Plain" SMTP authentication, and gmail requires SSL or TLS authentication to send and receive emails. We're looking at a few different possibilites on how to get this fixed, which lead me here.
Is it possible to set up email accounts on Lion Server that will accept emails without SSL or TLS authentication? Will Lion server still work well with the two PCs we have? And will I be able to continue to use my iMac for the design work I do now if I load Lion Server on it?
I don't mind recommending the purchase, I just want to make sure it will solve our issues before doing so. Thanks in advance for any help!Is it possible to set up email accounts on Lion Server that will accept emails without SSL or TLS authentication?
Yes. That's the default. You have to take extra steps to support SSL/TLS.
Will Lion server still work well with the two PCs we have?
Yes. email is pretty ubiquitous nowadays, and even PCs can connect to a standard UNIX mail server.
And will I be able to continue to use my iMac for the design work I do now if I load Lion Server on it?
Yes. Running server adds several background services to your machine, but if you're just running mail it won't be noticeable.
I don't mind recommending the purchase, I just want to make sure it will solve our issues before doing so.
There are many other issues involved in running your own mail server.
Are you planning/hoping to use this server for all your mail? including email coming in to your users?
If so you're going to run into issues with accounts, static IP addresses, reverse DNS and the like.
On the other hand, if you're just using this to relay your users' mail over to Gmail then it's not such a big deal. You will, however, need to get under the hood to configure gmail's TLS authentication, since the GUI doesn't provide this functionality - it can be done, but it's not a one-click option. -
Hi Experts,
Post upgrade of BI Portal (from 7.0 to 7.31), some tabs when clicked shows "Java communication error: An unknow error occured during Portal Communication" & "A nested exception occured. Could not execute the function" & "Could not connect to back-end system" errors
Checked default trace and it shows
"com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not create JCO connection. "
Please Help to solve this.
Thanks,
Preetha BalanHi Dev,
#2.0 #2014 06 30 02:04:36:580#0-700#Warning#/System/Server#
com.sap.ASJ.ses.cf0023#BC-JAS-COR-SES#kernel.sda#C000A7EEAF63000000000004000049FD###com.sap.engine.core.session.Manager########Thread[main,5,main]#Plain##
Could not register com.sap.engine.session.mbeans.ListSessionContextsOpenMBean. Exception is: java.lang.InstantiationException: com.sap.engine.session.mbeans.MonitorSessionsOpenMBean#
#2.0 #2014 06 30 02:05:09:366#0-700#Warning#/System/Server#
#BC-I18-JAV#tc~i18n~cp#C000A7EEAF63000200000000000049FD#11738650000000001##com.sap.i18n.cp.ConvertSimpleBase.Load shortcut failed#####a1dbec26003511e48a86002128280720##0#Service Runner [tc~sec~destinations~provider]#Plain##
Load shortcut failed. RscpInfo: Load shortcut failed.
InCp: 0100 OutCp: 0000
Rscp return code: 2048
Rscp error info:
.------------------------------============----------------------------.
| RSCP - Error |
| Error from: Codepage handling (RSCP) |
| code: 2048 RSCPENOCONV Wanted conversion not available. |
| no shortcut conversion table |
| module: rscpc no: 259 line: 22227 T100: TS012 |
| TSL01: CP9 p3: len=1,data=00 |
| p4: (0100->4102): kind of T1 entry 536870912 |
|----------------------------------------------------------------------|
| Impromptu CCC initialization by |
`----------------------------------------------------------------------'
#2.0 #2014 06 30 02:05:09:715#0-700#Warning#/System/Server#
com.sap.ASJ.http.000365#BC-JAS-WEB#http#C000A7EEAF63000300000000000049FD#11738650000000005##com.sap.engine.services.httpserver#####a1db654e003511e48ebf002128280720##0#Service Runner [http]#Plain##
IP address
Reverse Proxy Mappings property inaccuracy. There is no reverse proxy configuration added. Add proxy configurations for your reverse proxy.Otherwise the server will work with default configurations.#
#2.0 #2014 06 30 02:06:19:419#0-700#Error#/System/Server/AccountingService#
#BC-JAS-DPL#tc~bl~accounting_infra~srv#C000A7EEAF63000900000000000049FD#11738650000002121##com.sap.engine.services.accounting#####a1d6ee74003511e4b9a7002128280720##0#Event Processor [tc~bl~accounting_infra~srv]#Plain##
The service [tc~bl~accounting_infra~srv] was notified that [shell] service was started and its interface is [com.sap.engine.services.shell.core.ShellInterfaceImpl@e9f6065].Commands NOT registered.#
#2.0 #2014 06 30 02:07:14:378#0-700#Warning#/System/Server#
#BC-SRV-FP#com.adobe~DocumentServicesLicenseSupportService#C000A7EEAF63001100000000000049FD#11738650000002694##com.adobe.service.logging.Logger####A1D6EE74003511E4B9A7002128280720#a1d6ee74003511e4b9a7002128280720#a1d6ee74003511e4b9a7002128280720#0#Service Runner [com.adobe~DocumentServicesLicenseSupportService]#Plain#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
error getting ssl flag: null#
#2.0 #2014 06 30 02:07:14:914#0-700#Warning#/System/Server#
#BC-SRV-FP#com.adobe~DocumentServicesLicenseSupportService#C000A7EEAF63000500000003000049FD#11738650000002679##com.adobe.service.logging.Logger####A1D6EE74003511E4B9A7002128280720#a1d6ee74003511e4b9a7002128280720#a1d6ee74003511e4b9a7002128280720#0#Service Runner [com.adobe~DocumentServicesBinaries2]#Plain#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
error getting ssl flag: null#
#2.0 #2014 06 30 02:07:18:027#0-700#Warning#/System/Server#
#BC-SRV-FP#com.adobe~DocumentServicesLicenseSupportService#C000A7EEAF63001500000000000049FD#11738650000002686##com.adobe.service.logging.Logger####A1D6EE74003511E4B9A7002128280720#a1d6ee74003511e4b9a7002128280720#a1d6ee74003511e4b9a7002128280720#0#Service Runner [com.adobe~XMLFormService]#Plain#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
error getting ssl flag: null#
#2.0 #2014 06 30 02:07:22:611#0-700#Warning#/System/Server#
#BC-GP#caf~eu~gp~model#C000A7EEAF63000D00000001000049FD#11738650000002776##com.sap.caf.eu.gp.model.registry.Registry####A1D6EE74003511E4B9A7002128280720#a1d6ee74003511e4b9a7002128280720#a1d6ee74003511e4b9a7002128280720#0#Event Processor [caf~eu~gp~model]#Plain#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
Object not found in lookup of CallableObjects.
Object not found in lookup of CallableObjects.#
#2.0 #2014 06 30 02:07:28:688#0-700#Warning#/System/Server#
#BC-SRV-FP#com.adobe~DocumentServicesLicenseSupportService#C000A7EEAF63000200000002000049FD#11738650000003017##com.adobe.service.logging.Logger####A1D6EE74003511E4B9A7002128280720#a1d6ee74003511e4b9a7002128280720#a1d6ee74003511e4b9a7002128280720#0#Service Runner [com.adobe~DocumentServicesDestProtoService]#Plain#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
error getting ssl flag: null#
#2.0 #2014 06 30 02:07:28:715#0-700#Warning#/System/Server#
#BC-SRV-FP#com.adobe~DocumentServicesLicenseSupportService#C000A7EEAF63000E00000004000049FD#11738650000003013##com.adobe.service.logging.Logger####A1D6EE74003511E4B9A7002128280720#a1d6ee74003511e4b9a7002128280720#a1d6ee74003511e4b9a7002128280720#0#Service Runner [com.adobe~PDFManipulation]#Plain#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
error getting ssl flag: null#
#2.0 #2014 06 30 02:09:16:028#0-700#Warning#/System/Server/Services/Deploy#
com.sap.ASJ.dpl_ds.0005540#BC-JAS-COR-SES#sap.com/sessionmgmt~jco~applib#C000A7EEAF63002100000002000049FD#11738650000000001##com.sap.engine.services.deploy.server.TransactionManager#deploy_service#0##A46AD838003511E4BEF2002128280720#0586502c003611e4c033000000b31e1a#35C19778003611E48DBB000000B31E1B#0#Deploy Parallel Start Thread 4#Plain#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
Global [startApp] operation of application [sap.com/sessionmgmt~jco~applib] finished with non-critical warnings for [235] ms on server process [11738650]: #
#2.0 #2014 06 30 02:10:25:666#0-700#Warning#/System/Server/Services/Deploy#
com.sap.ASJ.dpl_ds.0005540#BC-SRV-TXV#sap.com/textverticalization_textapi#C000A7EEAF63002200000000000049FD#11738650000000001##com.sap.engine.services.deploy.server.TransactionManager#deploy_service#0##A46AD838003511E4BEF2002128280720#0586502c003611e4c033000000b31e1a#5F42D917003611E4B3E5000000B31E1B#0#Deploy Parallel Start Thread 1#Plain#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
Global [startApp] operation of application [sap.com/textverticalization_textapi] finished with non-critical warnings for [243] ms on server process [11738650]: #
#2.0 #2014 06 30 02:12:04:292#0-700#Error#/System/Server/CTC#
Registration of MBean :ConfigurationExportKMC failed! ###C000A7EEAF63002200000007000049FD#11738650000005292#sap.com/tc~lm~ctc~confs~cpa#com.sap.tc.lm.ctc.confs.cpa.ConfigurationProviderServiceImpl#Guest#0##A46AD838003511E4BEF2002128280720#0586502c003611e4c033000000b31e1a#990E856A003611E4AA18000000B31E1B#0#Deploy Parallel Start Thread 1#Plain#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
Registration of MBean :ConfigurationExportKMC failed! #
#2.0 #2014 06 30 02:12:12:532#0-700#Warning#/System/Server/Services/Deploy#
com.sap.ASJ.dpl_ds.0005540#BC-XI-IS-WKB#sap.com/com.sap.xi.mdt.soa#C000A7EEAF6300230000000B000049FD#11738650000000001##com.sap.engine.services.deploy.server.TransactionManager#deploy_service#0##A46AD838003511E4BEF2002128280720#0586502c003611e4c033000000b31e1a#9B43C84B003611E4B100000000B31E1B#0#Deploy Parallel Start Thread 3#Plain#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
Global [startApp] operation of application [sap.com/com.sap.xi.mdt.soa] finished with non-critical warnings for [6441] ms on server process [11738650]: #
#2.0 #2014 06 30 02:12:16:647#0-700#Warning#/System/Server/Services/Deploy#
com.sap.ASJ.dpl_ds.0005540#BC-NWA-INC-UIF#sap.com/tc~js~nwa~nav_engine~ear#C000A7EEAF63002200000008000049FD#11738650000000001##com.sap.engine.services.deploy.server.TransactionManager#deploy_service#0##A46AD838003511E4BEF2002128280720#0586502c003611e4c033000000b31e1a#A107F4A1003611E490A6000000B31E1B#0#Deploy Parallel Start Thread 1#Plain#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
Global [startApp] operation of application [sap.com/tc~js~nwa~nav_engine~ear] finished with non-critical warnings for [882] ms on server process [11738650]: #
#2.0 #2014 06 30 02:13:02:734#0-700#Warning#/System/Server/Services/Deploy#
com.sap.ASJ.dpl_ds.0005540#BC-NWA-SOV#sap.com/tc~lm~itsam~ui~tspreg~app#C000A7EEAF63002300000014000049FD#11738650000000001##com.sap.engine.services.deploy.server.TransactionManager#deploy_service#0##A46AD838003511E4BEF2002128280720#0586502c003611e4c033000000b31e1a#BC7AC6FC003611E4CEC6000000B31E1B#0#Deploy Parallel Start Thread 3#Plain#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
Global [startApp] operation of application [sap.com/tc~lm~itsam~ui~tspreg~app] finished with non-critical warnings for [920] ms on server process [11738650]: #
#2.0 #2014 06 30 02:22:00:723#0-700#Error#/System/Server/SLDService#
#BC-CCM-SLD#sld#C000A7EEAF63002C00000000000049FD#11738650000001300##com.sap.sldserv.comm.BridgeCommunicationHTTP####A1D6CC51003511E48EC1002128280720#a1d6cc51003511e48ec1002128280720#a1d6cc51003511e48ec1002128280720#0#Timeout Event Processor, id [1], invocation [0]#Plain#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
Failed to Send Data. Target URL: http://XXXX:50100/sld/ds, Status: 403, Message: Forbidden#
#2.0 #2014 06 30 02:22:00:730#0-700#Error#/System/Server/SLDService#
#BC-CCM-SLD#sld#C000A7EEAF63002C00000002000049FD#11738650000001300##com.sap.sldserv.DataCollector####A1D6CC51003511E48EC1002128280720#a1d6cc51003511e48ec1002128280720#a1d6cc51003511e48ec1002128280720#0#Timeout Event Processor, id [1], invocation [0]#Plain#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
Timeout processing failed#
#2.0 #2014 06 30 03:31:46:585#0-700#Warning#/System/Server/Services/Deploy#
com.sap.ASJ.dpl_ds.0005540##opentext.com/IM_APPROVAL_PORTAL6_0SP5#C000A7EEAF63004000000016000049FD#11738650000028624##com.sap.engine.services.deploy.server.TransactionManager#Guest#0##8356C9D9003511E4B823002128280720#8356c9d9003511e4b823002128280720#8356c9d9003511e4b823002128280720#0#StartRemoteCommand_b8106921004111e48396000000b31e1b#Plain#com.sap.engine.services.monitor.mbeans.MonitorResourceBundle#
Global [startApp] operation of application [opentext.com/IM_APPROVAL_PORTAL6_0SP5] finished with non-critical warnings for [2331] ms on server process [11738650]: # -
We have a smooth running OSX Server (standalone running 10.3.9) with mainly 10.3.9 clients (G3 iMacs to latest eMacs). When we configure brand new 10.4.3 clients (new eMacs) using the same settings in Directory Access we can't get login to work.
All that happens is that the Username and Password go grey and the machine hangs with frantic network activity (based on flickering lights on the switch). The dialog box doesn't shake.
In some cases the computer will eventually login but it takes several hours - usually though, not at all - or at least I get sick of waiting after a full school day.
Clearly there is some wrinkle about 10.4.3 that I can't see. If I clone one of our 10.3.9 machines onto the new machines they workl perfectly, but I want to use Tiger.
Everything is fully updated, network is 100baseT.
Steve Richards
Creswick PS
Australia
eMacs and a G4 Xserve Mac OS X (10.4.3) Server is 10.3.9Stephen,
You seem to be doing pretty well for having trained yourself.
By forward and reverse lookups, I meant DNS lookups--I typically use nslookup, but lookupd will work too. If you get the server's IP address from the FQDN (foward lookup) and the FQDN from the IP address (reverse lookup), then your DNS settings are fine.
Ultimately, you should change the paths to your share points so they meet the requirements, but before you do that, I would run a test with a temporary share point to see if you can get your 10.4.3 clients to work. Use something like the default /Users share point--re-share it if necessary, and make sure you create a network mount record for it--and then set up a test user with its home directory in that share point. Then see if you can log in as that user on a 10.4.3 client.
If you still can't, try using the dscl command-line utility to see if you can see the directory records for your automount. Here's an example from our setup (what you type is in italics):
% dscl localhost
cd LDAPv3/10.1.0.101/Mounts
/LDAPv3/10.1.0.101/Mounts > ls
my.server.edu:/Volumes/Students
/LDAPv3/10.1.0.161/Mounts > read my.server.edu<tab to auto-complete>
cn: my.server.edu:/Volumes/Students
mountDirectory: /Network/Servers/
Basically, this tells you what mounts are published on your server. In your instance, you should see an entry for your Group Folders/Middle Years share point in the list from the ls command. If you can see the mount records for your home directory share points, and you can see the attributes of those records with the read command, that eliminates one possible source of the problem (whether the client is having problems binding to the server). This is unlikely to be the problem in your circumstances, but it's good to eliminate it out of the box.
Note that your server's entry may be listed by host name instead of IP address--in dscl, cd into the LDAPv3 directory and do an ls to see what's there. If you don't see an entry, or if you can't cd into the Mounts directory or you see nothing there, try rebuilding the Directory Access preferences from scratch. Log in as admin, delete the contents of /Library/Preferences/DirectoryService, reboot, and run Directory Access to re-add an LDAPv3 configuration for your server. When you do that, enter the server's IP address, and Directory Access should fill in the search base for you. Save, quit, and reboot the machine, and see if you can log in then.
Now, to your questions. Search base is in fact the dc=my,dc=com part. The ldapsearch command is useful if you need to see whether your client can bind to an LDAP server. It's actually not likely to be helpful in this situation, because your clients seem to be authenticating. I wasn't thinking when I added that suggestion. As to "static bind"--that just means that you are configuring Directory Access explicitly to contact a specific server, rather than letting the client get that information through DHCP.
If none of this helps, of course, post back. And good luck.
David Walton
Power Macintosh G5 1.8/PowerBook G4 15 1.42 Mac OS X (10.3.9) -
Advices & rules for package hierarchy
Hi,
I developing a new project and I'll use packages for the first time. (My company doesn't have rules for package)
I would like to know the gereral rules for creating a good hierarchy.
i'm thinking of something like:
com.mycompany.myproject.form
com.mycompany.myproject.dialog
com.mycompany.myproject.sql
com.mycompany.myproject.dataobjects
com.mycompany.myproject.table
com.mycompany.myproject.tree
Should I use also packages like com.mycompany.table for generals stuff like table models that could be of use for others projects ?
Is this a good idea ? Do you have any suggestions ?I am not aware of any hard and fast rules for packaging. There are some things I keep in mind when I setup hierarchies though:
1) The "standard" (more common than standard) is your businesses internet address reversed. So for instance, if you are www.foo.com, your packages would start out with "com.foo". Some people leave off the "com" part as well, so you would have "foo". I don't like this however as more and more companies reserve "*.net" and "*.com" and "*.org" etc addresses. Leave the top level domain on there. This is mostly just for namespace sake, so you don't get two pieces of code from two different companies with the same name.
2) Is this the only product your company produces? OR will this be the only product your company produces? If the answer is no, you may want to put the product name next, so now we have "com.foo.product1". This will allow you to build nice, clash safe hierarchies.
3) Most products are broken down into a number of projects or modules. Sometimes its a good idea to divide the package structure with this information. So now we have "com.foo.product1.module1", "com.foo.product1.module2" etc.
4) If its an enterprise application (multitiered, J2EE, etc), I personally like to divide the code into tiers. It makes building easier and packaging for deployment much more intuitive. You might have web tier code, database tier code, application tier code, code common to all tiers etc. So now we have "com.foo.product1.module1.app" and "com.foo.product1.module1.web", etc. If its not an enterprise multi-tiered application, skip this step.
5) Now within the hierarchy we have built up, its pretty much up to you to logically divide your code.
6) It is now possible to "push" code up to certain levels to make it available to other projects/products/tiers. If you develop a nice data structure that you think might be useful to other products your company is developing, move the data structure up to an appropriate level to make it available to all products. For instance, "com.foo.structures.AwesomeStructure", instead of "com.foo.product1.structures.AwesomeStructure".
7) Products and projects should not import outside of their "scope". This prevents cross project dependency and cross product dependency. If another project or product needs to import something outside its scope then the code should be moved to a more common place to make it available.
Some will call this overly anal, but it has worked well for me for a few years. Hopefully others can provide you with more tips.
Hope this helps. -
Forward mail to MS Exchange for certain users
Hello.
We have a "master" Oracle Messaging Exchange Server and we have recently installed a Microsoft Messaging Server. We need certain users to use MS Exchange. The idea is changing mailHost LDAP attribute for those users (let's take [email protected] as an example), setting the MS Exchange HUB server, let's say hub.domain.com (mailHost: hub.domain.com). Doing so, mails sent to [email protected] are sent to hub.domain.com using lmtp channel. Everything works fine except for an issue: MS Exchange sees the from address like "user@lmtpcs-daemon", so we have to configure MS Exchange to use "lmtpcs-daemon" as secondary domain of domain.com, otherwise it doesn't know what to do with those mails.
Is there a way to not do that rewrite for certain users? Or maybe can we create a new channel to forward mails to Exchange? Could we define a channel depending on mailHost value or something like that?
Any thoughts?
Thank you very much.Thank you very much for your inputs.
It's being quite difficult for me to understand this whole mail routing thing. According to the documentation:
"The handling of a missing mailhost attribute is different depending on whether the entry is a user or a group. In the case of a user, a mailhost is essential, so if no mailhost attribute is present a new address of the form
@smarthost:user@domain
is constructed using the smart host for the domain determined by the LDAP_DOMAIN_ATTR_SMARTHOST MTA option"
Sounds good, it seems that I just need to delete mailHost attribute for the users who need to use Exchange and set LDAP_DOMAIN_ATTR_SMARTHOST in option.dat. I've tried that but I get a "4.0.0 temporary error returned by alias expansion" when I send a mail to the test user.
I've deleted the LDAP_DOMAIN_ATTR_SMARTHOST line and I've set mailRoutingSmartHost LDAP attribute for the user but I get the same result.
I'm not even sure about the mailRoutingSmartHost format. This is what I have:
mailRoutingSmartHost: correoweb.saludcastillayleon.es
root@MTA1 # imsimta test -rewrite -debug [email protected]
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
*** Debug output from initializing MM for submission:
09:49:06.60: Debug output enabled, system MTA1.domain.com, process 41f0.1, message enqueue routines version V6.3 compiled Mar 14 2008 17:07:19
09:49:06.60: mmc_winit('l','[email protected]','[email protected]') called.
09:49:06.60: Address reversal invoked on [email protected], force reverse URL 1, capture 1
09:49:06.60: Rewriting: Mbox = "postmaster", host = "mta1.domain.com", domain = "$*", literal = "", tag = ""
09:49:06.60: Rewrite: "$*", position 0, hash table -
09:49:06.60: Found: "$A$E$F$U%[email protected]"
09:49:06.60: Rewrite failed, not forward.
09:49:06.60: Rewrite: "$*", position 1, hash table -
09:49:06.60: Failed.
09:49:06.60: Rewrite: "$*", position 0, rewrite database -
09:49:06.60: Failed
09:49:06.60: Rewriting: Mbox = "postmaster", host = "mta1", domain = "mta1.domain.com", literal = "", tag = ""
09:49:06.60: Rewrite: "mta1.domain.com", position 0, hash table -
09:49:06.60: Found: "$U%[email protected]"
09:49:06.60: New mailbox: "postmaster".
09:49:06.60: New host: "mta1.domain.com".
09:49:06.60: New route: "mta1.domain.com".
09:49:06.60: New channel system: "mta1.domain.com".
09:49:06.60: Looking up host "mta1.domain.com".
09:49:06.60: - found on channel l
09:49:06.60: Routelocal flag set; scanning for % and !
09:49:06.60: Checking reverse URL cache for: [email protected]
09:49:06.60: Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
09:49:06.68: URL generation failed, status = 0
09:49:06.68: Mapped return address: [email protected]
09:49:06.68: from_access mapping check: ||MAIL|l|[email protected]|
09:49:06.68: Queue area size 145940970, temp area size 21837182
09:49:06.68: 36485242 blocks of effective free queue space available; setting disk limit accordingly.
09:49:06.68: 10918591 blocks of free temporary space available; setting disk limit accordingly.
09:49:06.68: - passed.
09:49:06.68: Rewriting: Mbox = "postmaster", host = "mta1.domain.com", domain = "$*", literal = "", tag = ""
09:49:06.68: Rewrite: "$*", position 0, hash table -
09:49:06.68: Found: "$A$E$F$U%[email protected]"
09:49:06.68: Rewrite failed, not forward.
09:49:06.68: Rewrite: "$*", position 1, hash table -
09:49:06.68: Failed.
09:49:06.68: Rewrite: "$*", position 0, rewrite database -
09:49:06.68: Failed
09:49:06.68: Rewriting: Mbox = "postmaster", host = "mta1", domain = "mta1.domain.com", literal = "", tag = ""
09:49:06.68: Rewrite: "mta1.domain.com", position 0, hash table -
09:49:06.68: Found: "$U%[email protected]"
09:49:06.68: New mailbox: "postmaster".
09:49:06.68: New host: "mta1.domain.com".
09:49:06.68: New route: "mta1.domain.com".
09:49:06.68: New channel system: "mta1.domain.com".
09:49:06.68: Looking up host "mta1.domain.com".
09:49:06.68: - found on channel l
09:49:06.68: Routelocal flag set; scanning for % and !
*** Debug output from rewriting a forward header address:
09:49:06.68: Rewriting: Mbox = "user", host = "domain.com", domain = "$*", literal = "", tag = ""
09:49:06.68: Rewrite: "$*", position 0, hash table -
09:49:06.68: Found: "$A$E$F$U%[email protected]"
09:49:06.68: Rewrite failed, not envelope.
09:49:06.68: Rewrite: "$*", position 1, hash table -
09:49:06.68: Failed.
09:49:06.68: Rewrite: "$*", position 0, rewrite database -
09:49:06.68: Failed
09:49:06.68: Rewriting: Mbox = "user", host = "saludcastillayleon", domain = "domain.com", literal = "", tag = ""
09:49:06.68: Rewrite: "domain.com", position 0, hash table -
09:49:06.68: Found: "$U%[email protected]"
09:49:06.68: New mailbox: "user".
09:49:06.68: New host: "domain.com".
09:49:06.68: New route: "mta1.domain.com".
09:49:06.68: New channel system: "mta1.domain.com".
09:49:06.68: Looking up host "mta1.domain.com".
09:49:06.68: - found on channel l
09:49:06.68: Routelocal flag set; scanning for % and !
09:49:06.68: Rewriting: Mbox = "user", host = "domain.com", domain = "$*", literal = "", tag = ""
09:49:06.68: Rewrite: "$*", position 0, hash table -
09:49:06.68: Found: "$A$E$F$U%[email protected]"
09:49:06.68: Rewrite failed, not envelope.
09:49:06.68: Rewrite: "$*", position 1, hash table -
09:49:06.68: Failed.
09:49:06.68: Rewrite: "$*", position 0, rewrite database -
09:49:06.68: Failed
09:49:06.68: Rewriting: Mbox = "user", host = "domain", domain = "domain.com", literal = "", tag = ""
09:49:06.68: Rewrite: "domain.com", position 0, hash table -
09:49:06.68: Found: "$U%[email protected]"
09:49:06.68: New mailbox: "user".
09:49:06.68: New host: "domain.com".
09:49:06.68: New route: "mta1.domain.com".
09:49:06.68: New channel system: "mta1.domain.com".
09:49:06.68: Looking up host "mta1.domain.com".
09:49:06.68: - found on channel l
09:49:06.68: Routelocal flag set; scanning for % and !
09:49:06.68: Rewrite rules result: [email protected]
09:49:06.68: Checking reverse URL cache for: [email protected]
09:49:06.68: Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
09:49:06.69: Resulting URL: ldap:///o%3Ddomain.com?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
09:49:06.69: mmc_open_url called to open ldap:///o%3Ddomain.com?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected])), flags = 384
09:49:06.69: URL with quotes stripped: ldap:///o%3Ddomain.com?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
09:49:06.69: LDAP URL identified
09:49:06.69: URL context #1 will be used
09:49:06.69: Performing URL search on: ldap:///o%3Ddomain.com?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
09:49:06.70: mmc_read_url result: [uid=user, ou=People, o=domain.com]
09:49:06.70: URL resolution returned: [uid=user, ou=People, o=domain.com]
09:49:06.70: mmc_read_url result: [preferredlanguage] en
09:49:06.70: URL resolution returned: [preferredlanguage] en
09:49:06.70: Attribute index: 0
09:49:06.70: LDAP URL produced preferred language en
09:49:06.70: mmc_read_url result: [mail] [email protected]
09:49:06.70: URL resolution returned: [mail] [email protected]
09:49:06.70: Attribute index: 0
09:49:06.70: LDAP URL produced address [email protected]
09:49:06.70: mmc_read_url result: [mailalternateaddress] [email protected]
09:49:06.70: URL resolution returned: [mailalternateaddress] [email protected]
09:49:06.70: Attribute index: 0
09:49:06.70: Alternate address [email protected]
09:49:06.70: No more results to return
*** Debug output from rewriting a forward envelope address:
09:49:06.70: Rewriting: Mbox = "user", host = "domain.com", domain = "$*", literal = "", tag = ""
09:49:06.70: Rewrite: "$*", position 0, hash table -
09:49:06.70: Found: "$A$E$F$U%[email protected]"
09:49:06.70: Match, pattern = "domain.com", current = "(*domaincheck*)"
09:49:06.70: old state = not checked.
09:49:06.70: Domain check on domain.com.
09:49:06.70: Added domain result 1 to cache for domain.com.
09:49:06.70: new state = succeeded.
09:49:06.70: New mailbox: "user".
09:49:06.70: New host: "domain.com".
09:49:06.70: New route: "mta1.domain.com".
09:49:06.70: New channel system: "mta1.domain.com".
09:49:06.70: Looking up host "mta1.domain.com".
09:49:06.70: - found on channel l
09:49:06.70: Routelocal flag set; scanning for % and !
address channel = l
forward channel = l
channel description =
channel caption =
channel user filter =
dest channel filter =
source channel filter =
channel flags #0 = BIDIRECTIONAL MULTIPLE IMMNONURGENT NOSERVICEALL
channel flags #1 = NOSMTP DEFAULT
channel flags #2 = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3 = LOGGING NORESTRICTED RETAINSECURITYMULTIPARTS
channel flags #4 = EIGHTBIT HEADERKEEPORDER NOHEADERREAD RULES
channel flags #5 = TRUNCATESMTPLONGLINES
channel flags #6 = LOCALUSER REPORTNOTARY
channel flags #7 = NOSWITCHCHANNEL NOREMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8 = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9 = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALSYSTEM NOTURN
defaulthost = domain.com domain.com
linelength = 1023
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = mta1.domain.com
channel after params =
channel user name =
urgentnotices = 1 2 4 7
normalnotices = 1 2 4 7
nonurgentnotices = 1 2 4 7
channel rightslist ids =
local behavior flags = %x7
expandchannel =
notificationchannel =
dispositionchannel =
saslswitchchannel =
tlsswitchchannel =
backward channel = l
unique identifier = [email protected]
header forward address = [email protected] (route (mta1.domain.com,mta1.domain.com)) (host domain.com)
header reverse address = [email protected]
envelope forw address = [email protected] (route (mta1.domain.com,mta1.domain.com)) (host domain.com)
envelope rev address = [email protected] (route (mta1.domain.com,mta1.domain.com)) (host domain.com)
name =
mbox = user
Extracted address action list:
[email protected]
Extracted 733 address action list:
[email protected]
Address list expansion:
*** Debug output from alias expansion:
09:49:06.70: Inner expand, level = 0, mailbox = [email protected]
09:49:06.70: Rewriting: Mbox = "user", host = "domain.com", domain = "$*", literal = "", tag = ""
09:49:06.70: Rewrite: "$*", position 0, hash table -
09:49:06.70: Found: "$A$E$F$U%[email protected]"
09:49:06.70: Match, pattern = "domain.com", current = "(*domaincheck*)"
09:49:06.70: old state = not checked.
09:49:06.70: Using result 1 from domain match cache.
09:49:06.70: new state = succeeded.
09:49:06.70: New mailbox: "user".
09:49:06.70: New host: "domain.com".
09:49:06.70: New route: "mta1.domain.com".
09:49:06.70: New channel system: "mta1.domain.com".
09:49:06.70: Looking up host "mta1.domain.com".
09:49:06.70: - found on channel l
09:49:06.70: Routelocal flag set; scanning for % and !
09:49:06.70: Reparsed mailbox: user
09:49:06.70: Reparsed host: domain.com
09:49:06.70: Variant #1 = [email protected]
09:49:06.70: Variant #2 = *@domain.com
09:49:06.70: Alias magic value 8764
09:49:06.70: LDAP URL template identified
09:49:06.70: URL determined to be: ldap:///o%3Ddomain.com?*?sub?(|([email protected])([email protected])([email protected]))
09:49:06.70: URL context #1 will be used
09:49:06.70: Performing URL search on: ldap:///o%3Ddomain.com?objectclass,inetuserstatus,mailuserstatus,inetMailGroupStatus,uid,preferredLanguage,mailRoutingAddress,mailMsgMaxBlocks,mail,mailAlternateAddress,mailEquivalentAddress,mailDeliveryOption,vacationStartDate,vacationEndDate,mailConversionTag,mailhost,mailQuota,mailMsgQuota,mailProgramDeliveryInfo,mailDeliveryFileURL,mailDeliveryFile,mailAutoReplyMode,mailAutoReplySubject,mailAutoReplyText,mailAutoReplyTextInternal,mailAutoReplyTimeOut,mailSieveRuleSource,mailForwardingAddress,mailDeferProcessing,mgrpMsgRejectAction,mgrpRejectText,mgrpMsgRejectText,mgrpBroadcasterPolicy,mgrpDisallowedBroadcaster,mgrpAllowedBroadcaster,mgrpDisallowedDomain,mgrpAllowedDomain,mgrpMsgMaxSize,mgrpAuthPassword,mgrpModerator,mgrpDeliverTo,memberURL,UniqueMember,mgrpRFC822MailMember,rfc822MailMember,mgrpErrorsTo,mgrpAddHeader,mgrpRemoveHeader,mgrpMsgPrefixText,mgrpMsgSuffixText,mgmanMemberVisibility,expandable?sub?(|([email protected])(mailAlternateAddress=user@09:49:06.72: Scanning LDAP result.
09:49:06.72: Attribute: objectclass
09:49:06.72: Attribute index: 0
09:49:06.72: Attribute: inetuserstatus
09:49:06.72: Attribute index: 1
09:49:06.72: Attribute: mailuserstatus
09:49:06.72: Attribute index: 2
09:49:06.72: Attribute: uid
09:49:06.72: Attribute index: 5
09:49:06.72: Attribute: preferredLanguage
09:49:06.72: Attribute index: 19
09:49:06.72: Attribute: mail
09:49:06.72: Attribute index: 31
09:49:06.72: Attribute: mailAlternateAddress
09:49:06.72: Attribute index: 32
09:49:06.72: Attribute: mailDeliveryOption
09:49:06.72: Attribute index: 34
09:49:06.72: Attribute: mailQuota
09:49:06.72: Attribute index: 51
09:49:06.72: Attribute: mailAutoReplyMode
09:49:06.72: Attribute index: 55
09:49:06.72: Attribute: mailForwardingAddress
09:49:06.72: Attribute index: 64
09:49:06.72: Attribute: mailDeferProcessing
09:49:06.72: Attribute index: 65
09:49:06.72: Scanning complete, begin actions
09:49:06.72: Possible user object classes: inetLocalMailRecipient+inetmailuser
09:49:06.72: Possible group object classes: inetLocalMailRecipient+inetmailgroup
09:49:06.72: Object class: top
09:49:06.72: Object class didn't match
09:49:06.72: Object class: person
09:49:06.72: Object class didn't match
09:49:06.72: Object class: inetuser
09:49:06.72: Object class didn't match
09:49:06.72: Object class: organizationalperson
09:49:06.72: Object class didn't match
09:49:06.72: Object class: inetorgperson
09:49:06.72: Object class didn't match
09:49:06.72: Object class: ipuser
09:49:06.72: Object class didn't match
09:49:06.72: Object class: inetmailuser
09:49:06.72: Object class match, reference value 1
09:49:06.72: Object class: inetlocalmailrecipient
09:49:06.72: Object class match, reference value 18
09:49:06.72: Object class: userpresenceprofile
09:49:06.72: Object class didn't match
09:49:06.72: Object class: inetsubscriber
09:49:06.72: Object class didn't match
09:49:06.72: Object class: icscalendaruser
09:49:06.72: Object class didn't match
09:49:06.72: Object class: iplanet-am-managed-person
09:49:06.72: Object class didn't match
09:49:06.72: Object class: iplanet-am-user-service
09:49:06.72: Object class didn't match
09:49:06.72: Object class: iplanetpreferences
09:49:06.72: Object class didn't match
09:49:06.72: Object class: inetadmin
09:49:06.72: Object class didn't match
09:49:06.72: Object class: sunamauthaccountlockout
09:49:06.72: Object class didn't match
09:49:06.72: Object class: sunUCPreferences
09:49:06.72: Object class didn't match
09:49:06.72: Object class: mailDomain
09:49:06.72: Object class didn't match
09:49:06.72: User/group index = 1
09:49:06.72: Domain is active
09:49:06.72: Mail domain is active
09:49:06.72: User status = active
09:49:06.72: User is active
09:49:06.72: Mail user status = active
09:49:06.72: User is active
09:49:06.72: User UID user found.
09:49:06.73: Delivery option: mailbox
09:49:06.73: Delivery options value: 1
09:49:06.73: Processing mailhost attribute
09:49:06.73: Mailhost not set for user
09:49:06.73: Adding result to cache.
09:49:06.73: Status for this address = -10
09:49:06.73: LDAP URL template identified
09:49:06.73: URL determined to be: ldap:///o%3Ddomain.com?*?sub?([email protected])
09:49:06.73: URL context #1 will be used
09:49:06.73: Performing URL search on: ldap:///o%3Ddomain.com?objectclass,inetuserstatus,mailuserstatus,inetMailGroupStatus,uid,preferredLanguage,mailRoutingAddress,mailMsgMaxBlocks,mail,mailAlternateAddress,mailEquivalentAddress,mailDeliveryOption,vacationStartDate,vacationEndDate,mailConversionTag,mailhost,mailQuota,mailMsgQuota,mailProgramDeliveryInfo,mailDeliveryFileURL,mailDeliveryFile,mailAutoReplyMode,mailAutoReplySubject,mailAutoReplyText,mailAutoReplyTextInternal,mailAutoReplyTimeOut,mailSieveRuleSource,mailForwardingAddress,mailDeferProcessing,mgrpMsgRejectAction,mgrpRejectText,mgrpMsgRejectText,mgrpBroadcasterPolicy,mgrpDisallowedBroadcaster,mgrpAllowedBroadcaster,mgrpDisallowedDomain,mgrpAllowedDomain,mgrpMsgMaxSize,mgrpAuthPassword,mgrpModerator,mgrpDeliverTo,memberURL,UniqueMember,mgrpRFC822MailMember,rfc822MailMember,mgrpErrorsTo,mgrpAddHeader,mgrpRemoveHeader,mgrpMsgPrefixText,mgrpMsgSuffixText,mgmanMemberVisibility,expandable?sub?([email protected])
09:49:06.75: Search succeeded but 0 entries returned
09:49:06.75: No matching entries were found that were valid
09:49:06.75: Status for this address = 0
0 expansion total.
*** Debug output from submitting an envelope address:
09:49:06.75: mmc_wadr(0x08103050,'[email protected]','[email protected]') called.
09:49:06.75: Copy estimate before address addition is 1
09:49:06.75: Parsing address [email protected]
09:49:06.75: Rewriting: Mbox = "user", host = "domain.com", domain = "$*", literal = "", tag = ""
09:49:06.75: Rewrite: "$*", position 0, hash table -
09:49:06.75: Found: "$A$E$F$U%[email protected]"
09:49:06.75: Match, pattern = "domain.com", current = "(*domaincheck*)"
09:49:06.75: old state = not checked.
09:49:06.75: Using result 1 from domain match cache.
09:49:06.75: new state = succeeded.
09:49:06.75: New mailbox: "user".
09:49:06.75: New host: "domain.com".
09:49:06.75: New route: "mta1.domain.com".
09:49:06.75: New channel system: "mta1.domain.com".
09:49:06.75: Looking up host "mta1.domain.com".
09:49:06.75: - found on channel l
09:49:06.75: Routelocal flag set; scanning for % and !
09:49:06.75: Address [email protected] requires local processing.
09:49:06.75: Variant #1 = [email protected]
09:49:06.75: Variant #2 = *@domain.com
09:49:06.75: Alias magic value 8764
09:49:06.75: Checking for [email protected] in the system alias file
09:49:06.75: - not found
09:49:06.75: Checking for *@domain.com in the system alias file
09:49:06.75: - not found
09:49:06.75: Checking [email protected] with URL template ldap:///$V?*?sub?$R
09:49:06.75: LDAP URL template identified
09:49:06.75: URL determined to be: ldap:///o%3Ddomain.com?*?sub?(|([email protected])([email protected])([email protected]))
09:49:06.75: URL context #1 will be used
09:49:06.75: Using cached LDAP result for URL info: ldap:///$V?*?sub?$R|[email protected]|[email protected]
09:49:06.75: Scanning LDAP result.
09:49:06.75: Attribute: objectclass
09:49:06.75: Attribute index: 0
09:49:06.75: Attribute: inetuserstatus
09:49:06.75: Attribute index: 1
09:49:06.75: Attribute: mailuserstatus
09:49:06.75: Attribute index: 2
09:49:06.75: Attribute: uid
09:49:06.75: Attribute index: 5
09:49:06.75: Attribute: preferredLanguage
09:49:06.75: Attribute index: 19
09:49:06.75: Attribute: mail
09:49:06.75: Attribute index: 31
09:49:06.75: Attribute: mailAlternateAddress
09:49:06.75: Attribute index: 32
09:49:06.75: Attribute: mailDeliveryOption
09:49:06.75: Attribute index: 34
09:49:06.75: Attribute: mailQuota
09:49:06.75: Attribute index: 51
09:49:06.75: Attribute: mailAutoReplyMode
09:49:06.75: Attribute index: 55
09:49:06.75: Attribute: mailForwardingAddress
09:49:06.75: Attribute index: 64
09:49:06.75: Attribute: mailDeferProcessing
09:49:06.75: Attribute index: 65
09:49:06.75: Scanning complete, begin actions
09:49:06.75: Possible user object classes: inetLocalMailRecipient+inetmailuser
09:49:06.75: Possible group object classes: inetLocalMailRecipient+inetmailgroup
09:49:06.75: Object class: top
09:49:06.75: Object class didn't match
09:49:06.75: Object class: person
09:49:06.75: Object class didn't match
09:49:06.75: Object class: inetuser
09:49:06.75: Object class didn't match
09:49:06.75: Object class: organizationalperson
09:49:06.75: Object class didn't match
09:49:06.75: Object class: inetorgperson
09:49:06.75: Object class didn't match
09:49:06.75: Object class: ipuser
09:49:06.75: Object class didn't match
09:49:06.75: Object class: inetmailuser
09:49:06.75: Object class match, reference value 1
09:49:06.75: Object class: inetlocalmailrecipient
09:49:06.75: Object class match, reference value 18
09:49:06.75: Object class: userpresenceprofile
09:49:06.75: Object class didn't match
09:49:06.75: Object class: inetsubscriber
09:49:06.75: Object class didn't match
09:49:06.75: Object class: icscalendaruser
09:49:06.75: Object class didn't match
09:49:06.75: Object class: iplanet-am-managed-person
09:49:06.75: Object class didn't match
09:49:06.75: Object class: iplanet-am-user-service
09:49:06.75: Object class didn't match
09:49:06.75: Object class: iplanetpreferences
09:49:06.75: Object class didn't match
09:49:06.75: Object class: inetadmin
09:49:06.75: Object class didn't match
09:49:06.75: Object class: sunamauthaccountlockout
09:49:06.75: Object class didn't match
09:49:06.75: Object class: sunUCPreferences
09:49:06.75: Object class didn't match
09:49:06.75: Object class: mailDomain
09:49:06.75: Object class didn't match
09:49:06.75: User/group index = 1
09:49:06.75: Domain is active
09:49:06.75: Mail domain is active
09:49:06.75: User status = active
09:49:06.75: User is active
09:49:06.75: Mail user status = active
09:49:06.75: User is active
09:49:06.75: User UID user found.
09:49:06.75: Delivery option: mailbox
09:49:06.75: Delivery options value: 1
09:49:06.75: Processing mailhost attribute
09:49:06.75: Mailhost not set for user
09:49:06.75: Status for this address = -10
09:49:06.75: Temporary alias URL failure; reprocess later
09:49:06.75: - adding address [email protected] to channel reprocess
09:49:06.75: Good address count 1 defer count 1
09:49:06.75: All addresses deferred - treat as general temporary error
09:49:06.75: Copy estimate after address addition is 2
09:49:06.75: mmc_waend(0x08103050) called.
09:49:06.75: Copy estimate is 2
09:49:06.75: Queue area size 145940970, temp area size 21837154
09:49:06.75: 36485242 blocks of effective free queue space available; setting disk limit accordingly.
09:49:06.75: 10918577 blocks of free temporary space available; setting disk limit accordingly.
Submitted address list:
Address list error -- 4.0.0 temporary error returned by alias expansion: [email protected]
Submitted notifications list: -
Setup iCal server accessible to the LAN via web browser
Hello guys,
I am newbie in mac server and I believe there are lots of guys over there that could help me.
Here's my environment:
Software/Server: Mac OS X Server 10.6
Hardware: Mac Mini Server Snow Leopard
LAN/internet Setup:
Broadband -> router -> mac mini server
-> mac users
-> pc users
Now, here's my scenario:
The mac mini is already running (OS is already installed) and act a normal computer usage like internet browsing, doing some documents and so on and so forth. But now, we decided to make the mac mini server as a server(calendar (iCal) server, address book server, web-server). I'm not so much familiar with DNS, DHCP or networking things to make the client computers connected to server.
My main concern is that I want the calendar to be accessible via web browser in our local network (something like this -> http://calendar.company/ or can access via IP address of the server like.. http://192.168.1.20/), in this case Mac and PC users connected to our LAN(router) can able to access and share their our calendar.
Now questions are:
1. How can I setup the mac mini server and calendar server to be accessible via web browser to the mac and pc users?
2. Do I still need to setup DNS and public IP for my server?
3. Where can I get a step by step tutorials that I could follow?
All recommendations and comments are all appreciated
Thanks in advance,
EmmmanI can't find any clear and step by step instructions with my concern. I am not expecting this to be easy(can setup even non-IT) as apple advertise but as I am reading the documentations I notice these things to be properly setup:
1. Functional DNS system. - This is a high level networking Stuff(Non-IT can't even understand it).
2. IP addresses, reverse IP's etc - Non-IT can't even understand it
3. Router Configurations - Non-IT can't even understand it.
and so on and so forth.
We, the newbie on mac server just need a clear and step by step scenario on how to setup the whole thing.
Thank you. -
Lync 2013 External Mobility Not Working
Hello,
The issue I seem to be having is in regards to the external mobility access.
So far everything else in our environment seems to be functioning properly.
The Lync desktop client works both internally as well as externally.
The Lync internal mobility also works. The only issue seems to be with the external mobility part.
I tried going to the external autodiscover address for our system, https://lyncdiscover.mydomain.com but it doesn’t return anything either.
I think the issue lies somewhere with DNS or my reverse proxy, however I’m having a hard time being able to just start changing settings seeing as how I don’t want to break everything that is currently working for our users.
I’ve been through a lot of the post here but I still can’t seem to find the settings to fix the issue I’m having.
Here is a breakdown of my settings I feel are in question:
1 – Lync 2013 FE Server (LYNC01)
1 – Lync Edge Server (EDGE01)
1 – Reverse Proxy Server (RPROXY01)
Public DNS:
A Records
SIP.mydomain.com
205.XXX.XXX.91 (Access Service on EDGE01)
AccessEdge.mydomain.com
205.XXX.XXX.91 (Access Service on EDGE01)
WebConfEdge.mydomain.com 205.XXX.XXX.92 (WebConf Service on EDGE01)
AVEdge.mydomain.com
205.XXX.XXX.93 (A/VEdge Service on EDGE01)
meet.mydomain.com
205.XXX.XXX.94 (Reverse Proxy Server)
dialin.mydomain.com
205.XXX.XXX.94 (Reverse Proxy Server)
lync.mydomain.com
205.XXX.XXX.94 (Reverse Proxy Server)
lyncdiscover.mydomain.com 205.XXX.XXX.94 (Reverse Proxy
Server)
SRV
_sip._tls.mydomain.com:443
AccessEdge.mydomain.com
_sipfederationtls._tcp.mydomain.com:5061
AccessEdge.mydomain.com
_xmpp-server._tcp.mydomain.com
AccessEdge.mydomain.com
Private DNS:
A Records
LYNC01
172.XXX.XXX.65 (LYNC01 FE Server)
Admin
172.XXX.XXX.65 (LYNC01 FE Server)
Dialin
172.XXX.XXX.65 (LYNC01 FE Server)
LyncDiscoverInternal
172.XXX.XXX.65 (LYNC01 FE Server)
Meet
172.XXX.XXX.65 (LYNC01 FE Server)
Sip
172.XXX.XXX.65 (LYNC01 FE Server)
EDGE01
172.XXX.XXX.66 (EDGE01 Server)
RPROXY01
172.XXX.XXX.70 (Reverse Proxy Server)
Lync
205.XXX.XXX.94 (Reverse Proxy Server)
LyncDiscover
(CNAME)
lync.gmsd.k12.pa.us
SRV
_xmpp-server._tcp.mydomain.com
Sip.mydomain.com
_sipinternaltls._tcp.mydomain.com:5061
LYNC01.mydomain.com
Lync Server Services Addresses
Lync FE Server: \\
LYNC01.mydomain.com (172.XXX.XXX.65)
File Store: \\
LYNC01.mydomain.com\Share
Office Web Apps Server:
\\lyncowa.mydomain.com
External Web Services:
\\lync.mydomain.com
Edge Server Services Addresses
Edge Server:
\\ EDGE01.mydomain.com (172.XXX.XXX.66)
Access Edge Service:
\\AccessEdge.mydomain.com (172.XXX.XXX.67, 205.XXX.XXX.91)
Web Conference Service: \\WebConfEdge.mydomain.com (172.XXX.XXX.68, 205.XXX.XXX.92)
A/V Edge Service: \\WebConfEdge.mydomain.com
(172.XXX.XXX.69, 205.XXX.XXX.93)
Reverse Proxy Server Addresses
Reverse Proxy Server:
RPROXY01.mydomain.com (172.XXX.XXX.70, 205.XXX.XXX.94)
Server Farms:
Dialin.mydomain.com:
Dialin.mydomain.com (LYNC01)
Meet.mydomain.com:
Meet.mydomain.com (LYNC01)
LyncDiscover.mydomain.com:
LYNC01.mydomain.com (LYNC01)
Lync.mydomain.com:
LYNC01.mydomain.com (LYNC01)
Edge External Cert
AccessEdge.mydomain.com
Sip.mydomain.com
WebConfEdge.mydomain.com
Reverse Proxy Cert
lync.mydomain.com
meet.mydomain.com
dialin.mydomain.com
lyncdiscover.mydomain.com
lyncowa.mydomain.com
With everything else working as it should, this external mobility part is just not really making sense to me. I have also verified that the correct ports are being using on the reverse proxy as well for the server farms,
8080 and 4443. Any help would be greatly appreciated. Thank you.I'm also attaching the log file from running Lync Connectivity Analyzer if it helps.
[6/10/2014 7:30:18 AM] [DEBUG] Logging test parameters:
[6/10/2014 7:30:18 AM] [DEBUG] SIP Uri: [email protected]
[6/10/2014 7:30:18 AM] [DEBUG] User Name:
[6/10/2014 7:30:18 AM] [DEBUG] Discovery Type: Automatic Discovery
[6/10/2014 7:30:18 AM] [DEBUG] Network access: NetworkAccessExternal
[6/10/2014 7:30:18 AM] [DEBUG] Selected client: ApplicationLyncMobile2010
[6/10/2014 7:30:18 AM] [SUBHEADING] Starting Lync server autodiscovery
[6/10/2014 7:30:18 AM] [INFO] Please wait; this test may take several minutes to complete...
[6/10/2014 7:30:18 AM] [SUBHEADING] Starting automatic discovery for secure (HTTPS) internal channel
[6/10/2014 7:30:18 AM] [DEBUG] Sending HTTP request to https://lyncdiscoverinternal.mydomain.com/[email protected]
[6/10/2014 7:30:18 AM] [DEBUG] Cookie found in autodiscover response: StatusCode: 200, ReasonPhrase: 'OK', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Pragma: no-cache
X-MS-Server-Fqdn: LYNC01.mydomain.com
X-Content-Type-Options: nosniff
Cache-Control: no-cache
Date: Tue, 10 Jun 2014 11:30:18 GMT
Server: Microsoft-IIS/7.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Content-Length: 670
Content-Type: application/vnd.microsoft.rtc.autodiscover+xml; v=1
Expires: -1
[6/10/2014 7:30:18 AM] [DEBUG] Parsing the response for URL https://lyncdiscoverinternal.mydomain.com/[email protected]. Full response: <?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" AccessLocation="Internal"><Root><Link token="Domain" href="https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/domain" /><Link token="User" href="https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/user"
/><Link token="OAuth" href="https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/oauth/user" /><Link token="Self" href="https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root" /></Root></AutodiscoverResponse>
[6/10/2014 7:30:18 AM] [DEBUG] Autodiscover URL https://lyncdiscoverinternal.mydomain.com/[email protected] redirected to https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/user
[6/10/2014 7:30:18 AM] [DEBUG] Sending HTTP request to https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/[email protected]
[6/10/2014 7:30:18 AM] [DEBUG] Cookie found in autodiscover response: StatusCode: 401, ReasonPhrase: 'Unauthorized', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
X-MS-WebTicketURL: https://lync01.mydomain.com/WebTicket/WebTicketService.svc
X-MS-WebTicketSupported: cwt,saml
X-MS-Server-Fqdn: LYNC01.mydomain.com
X-Content-Type-Options: nosniff
Date: Tue, 10 Jun 2014 11:30:18 GMT
Server: Microsoft-IIS/7.5
X-Powered-By: ASP.NET
Content-Length: 1293
Content-Type: text/html
[6/10/2014 7:30:18 AM] [DEBUG] Authorization required for https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/[email protected]
[6/10/2014 7:30:18 AM] [DEBUG] Obtaining WebTicket from https://lync01.mydomain.com/WebTicket/WebTicketService.svc
[6/10/2014 7:30:18 AM] [DEBUG] On-premises WebTicket server: https://lync01.mydomain.com/WebTicket/WebTicketService.svc/Auth
[6/10/2014 7:30:18 AM] [DEBUG] AcquireTicketAsync succeeded for https://lync01.mydomain.com/WebTicket/WebTicketService.svc/Auth
[6/10/2014 7:30:18 AM] [DEBUG] WebTicket: <saml:Assertion MajorVersion="1" MinorVersion="1" AssertionID="SamlSecurityToken-4e51bf2a-2849-4779-a595-a5040c22ff1b" Issuer="https://lync01.mydomain.com/63b16135-930c-5e0b-998c-7ed6bc68b6f8" IssueInstant="2014-06-10T11:30:18.173Z"
xmlns:saml="urn:oasis:names:tc:SAML:1.0:assertion"><saml:Conditions NotBefore="2014-06-10T11:30:18.173Z" NotOnOrAfter="2014-06-10T19:23:01.173Z"><saml:AudienceRestrictionCondition><saml:Audience>https://lync01.mydomain.com/</saml:Audience></saml:AudienceRestrictionCondition></saml:Conditions><saml:AuthenticationStatement
AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:unspecified" AuthenticationInstant="2014-06-10T11:30:18.173Z"><saml:Subject><saml:NameIdentifier Format="http://schemas.xmlsoap.org/ws/2005/05/identity/claims/uri">sip:[email protected]</saml:NameIdentifier><saml:SubjectConfirmation><saml:ConfirmationMethod>urn:oasis:names:tc:SAML:1.0:cm:holder-of-key</saml:ConfirmationMethod><KeyInfo
xmlns="http://www.w3.org/2000/09/xmldsig#"><e:EncryptedKey xmlns:e="http://www.w3.org/2001/04/xmlenc#"><e:EncryptionMethod Algorithm="http://www.w3.org/2001/04/xmlenc#kw-aes256"></e:EncryptionMethod><KeyInfo><KeyName>63b16135-930c-5e0b-998c-7ed6bc68b6f8:8d152b04ce7ddbf</KeyName></KeyInfo><e:CipherData><e:CipherValue>7M3R6naVg1ifGvuQKTMS+4EjHlJrdZeQqsqobNZUhMxHE9y7klUmXw==</e:CipherValue></e:CipherData></e:EncryptedKey></KeyInfo></saml:SubjectConfirmation></saml:Subject></saml:AuthenticationStatement><Signature
xmlns="http://www.w3.org/2000/09/xmldsig#"><SignedInfo><CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"></CanonicalizationMethod><SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"></SignatureMethod><Reference
URI="#SamlSecurityToken-4e51bf2a-2849-4779-a595-a5040c22ff1b"><Transforms><Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature"></Transform><Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"></Transform></Transforms><DigestMethod
Algorithm="http://www.w3.org/2001/04/xmlenc#sha256"></DigestMethod><DigestValue>otvulmCO6kY0HQdwfqQXUZT/pdmKSdVZJTU0f/MS0N8=</DigestValue></Reference></SignedInfo><SignatureValue>WUGQOtUzu6RtuSKdHHCQZWxiOFVf8HT181U6tS8IVifyyAzA046lm0SBKbFpLzwMEAXsf3ZmkHQkzK/AfS6WJ92WkAz3LLEsqSqGBGQoxe5WPXMlfA9J4+1lnT6Zsfq7fb9aLqZch2oSga3yj0CeQgsbcmppQhQO86zJ468YskVyAk4Y/oIOyThKg/+Ce8V4tFw575+zYatuSzKvUtgHq+DKJRO7T2M8r0aoCx65ZgfCxJpA+bqalDz3BesqOzMKfWTn33fwArVh8JMF1ohNkliwOegTeEEq4aH2Sg04N7ZfLrhoFlWeXuZWn1AzWppyl+FBfwlbLOVbQgP6/3NdMQ==</SignatureValue><KeyInfo><o:SecurityTokenReference
xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"><o:KeyIdentifier ValueType="http://docs.oasis-open.org/wss/oasis-wss-soap-message-security-1.1#ThumbprintSHA1">/YVCIdf+YFyKopRflv61uWov2vs=</o:KeyIdentifier></o:SecurityTokenReference></KeyInfo></Signature></saml:Assertion>
[6/10/2014 7:30:18 AM] [DEBUG] Sending HTTP request to https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/[email protected]
[6/10/2014 7:30:18 AM] [DEBUG] Cookie found in autodiscover response: StatusCode: 200, ReasonPhrase: 'OK', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Pragma: no-cache
X-MS-Server-Fqdn: LYNC01.mydomain.com
X-Content-Type-Options: nosniff
Cache-Control: no-cache
Date: Tue, 10 Jun 2014 11:30:18 GMT
Server: Microsoft-IIS/7.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Content-Length: 1646
Content-Type: application/vnd.microsoft.rtc.autodiscover+xml; v=1
Expires: -1
[6/10/2014 7:30:18 AM] [DEBUG] Parsing the response for URL https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/[email protected]. Full response: <?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" AccessLocation="Internal"><User><SipServerInternalAccess fqdn="LYNC01.mydomain.com" port="5061" /><SipClientInternalAccess fqdn="LYNC01.mydomain.com" port="5061" /><SipServerExternalAccess
fqdn="AccessEdge.mydomain.com" port="5061" /><SipClientExternalAccess fqdn="AccessEdge.mydomain.com" port="443" /><Link token="Internal/Autodiscover" href="https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root" /><Link token="Internal/AuthBroker"
href="https://lync01.mydomain.com/Reach/sip.svc" /><Link token="Internal/WebScheduler" href="https://lync01.mydomain.com/Scheduler" /><Link token="External/Autodiscover" href="https://lync.mydomain.com/Autodiscover/AutodiscoverService.svc/root"
/><Link token="External/AuthBroker" href="https://lync.mydomain.com/Reach/sip.svc" /><Link token="External/WebScheduler" href="https://lync.mydomain.com/Scheduler" /><Link token="Internal/Mcx" href="https://lync01.mydomain.com/Mcx/McxService.svc"
/><Link token="External/Mcx" href="https://lync01.mydomain.com/Mcx/McxService.svc" /><Link token="Ucwa" href="https://lync.mydomain.com/ucwa/v0/applications" /><Link token="Internal/Ucwa" href="https://lync01.mydomain.com/ucwa/v0/applications"
/><Link token="External/Ucwa" href="https://lync.mydomain.com/ucwa/v0/applications" /><Link token="Self" href="https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/user" /></User></AutodiscoverResponse>
[6/10/2014 7:30:18 AM] [INFO] Server discovery has completed for https://lyncdiscoverinternal.mydomain.com/.
[6/10/2014 7:30:18 AM] [DEBUG] Autodiscover full response for URL https://lyncdiscoverinternal.mydomain.com/ is <?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
AccessLocation="Internal"><User><SipServerInternalAccess fqdn="LYNC01.mydomain.com" port="5061" /><SipClientInternalAccess fqdn="LYNC01.mydomain.com" port="5061" /><SipServerExternalAccess fqdn="AccessEdge.mydomain.com" port="5061"
/><SipClientExternalAccess fqdn="AccessEdge.mydomain.com" port="443" /><Link token="Internal/Autodiscover" href="https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root" /><Link token="Internal/AuthBroker" href="https://lync01.mydomain.com/Reach/sip.svc"
/><Link token="Internal/WebScheduler" href="https://lync01.mydomain.com/Scheduler" /><Link token="External/Autodiscover" href="https://lync.mydomain.com/Autodiscover/AutodiscoverService.svc/root" /><Link token="External/AuthBroker" href="https://lync.mydomain.com/Reach/sip.svc"
/><Link token="External/WebScheduler" href="https://lync.mydomain.com/Scheduler" /><Link token="Internal/Mcx" href="https://lync01.mydomain.com/Mcx/McxService.svc" /><Link token="External/Mcx" href="https://lync01.mydomain.com/Mcx/McxService.svc"
/><Link token="Ucwa" href="https://lync.mydomain.com/ucwa/v0/applications" /><Link token="Internal/Ucwa" href="https://lync01.mydomain.com/ucwa/v0/applications" /><Link token="External/Ucwa" href="https://lync.mydomain.com/ucwa/v0/applications"
/><Link token="Self" href="https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/user" /></User></AutodiscoverResponse>
[6/10/2014 7:30:18 AM] [DEBUG] SendRequest failed for https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/[email protected]
[6/10/2014 7:30:18 AM] [INFO] Automatic discovery results for https://lyncdiscoverinternal.mydomain.com/
[6/10/2014 7:30:18 AM] [INFO] Access Location : Internal
[6/10/2014 7:30:18 AM] [INFO] SIP Server Internal Access : LYNC01.mydomain.com
[6/10/2014 7:30:18 AM] [INFO] SIP Server External Access : AccessEdge.mydomain.com
[6/10/2014 7:30:18 AM] [INFO] SIP Client Internal Access : LYNC01.mydomain.com
[6/10/2014 7:30:18 AM] [INFO] SIP Client External Access : AccessEdge.mydomain.com
[6/10/2014 7:30:18 AM] [INFO] Internal Auth broker service : https://lync01.mydomain.com/Reach/sip.svc
[6/10/2014 7:30:18 AM] [INFO] External Auth broker service : https://lync.mydomain.com/Reach/sip.svc
[6/10/2014 7:30:18 AM] [INFO] Internal Auto discover service : https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root
[6/10/2014 7:30:18 AM] [INFO] External Auto discover service : https://lync.mydomain.com/Autodiscover/AutodiscoverService.svc/root
[6/10/2014 7:30:18 AM] [INFO] Internal MCX service : https://lync01.mydomain.com/Mcx/McxService.svc
[6/10/2014 7:30:18 AM] [INFO] External MCX service : https://lync01.mydomain.com/Mcx/McxService.svc
[6/10/2014 7:30:18 AM] [INFO] Internal UCWA service : https://lync01.mydomain.com/ucwa/v0/applications
[6/10/2014 7:30:18 AM] [INFO] External UCWA service : https://lync.mydomain.com/ucwa/v0/applications
[6/10/2014 7:30:18 AM] [INFO] Internal Webscheduler service : https://lync01.mydomain.com/Scheduler
[6/10/2014 7:30:18 AM] [INFO] External Webscheduler service : https://lync.mydomain.com/Scheduler
[6/10/2014 7:30:18 AM] [INFO] Total server discovery time: 0.1 seconds
[6/10/2014 7:30:18 AM] [SUMMARY_SUCCESS] Server discovery succeeded for secure (HTTPS) internal channel against URL https://lyncdiscoverinternal.mydomain.com/
[6/10/2014 7:30:18 AM] [SUBHEADING] Starting automatic discovery for unsecure (HTTP) internal channel
[6/10/2014 7:30:18 AM] [DEBUG] Sending HTTP request to http://lyncdiscoverinternal.mydomain.com/[email protected]
[6/10/2014 7:30:18 AM] [DEBUG] Cookie found in autodiscover response: StatusCode: 200, ReasonPhrase: 'OK', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Pragma: no-cache
X-MS-Server-Fqdn: LYNC01.mydomain.com
X-Content-Type-Options: nosniff
Cache-Control: no-cache
Date: Tue, 10 Jun 2014 11:30:18 GMT
Server: Microsoft-IIS/7.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Content-Length: 670
Content-Type: application/vnd.microsoft.rtc.autodiscover+xml; v=1
Expires: -1
[6/10/2014 7:30:18 AM] [DEBUG] Parsing the response for URL http://lyncdiscoverinternal.mydomain.com/[email protected]. Full response: <?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" AccessLocation="Internal"><Root><Link token="Domain" href="https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/domain" /><Link token="User" href="https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/user"
/><Link token="OAuth" href="https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/oauth/user" /><Link token="Self" href="https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root" /></Root></AutodiscoverResponse>
[6/10/2014 7:30:18 AM] [DEBUG] Autodiscover URL http://lyncdiscoverinternal.mydomain.com/[email protected] redirected to https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/user
[6/10/2014 7:30:18 AM] [DEBUG] Sending HTTP request to https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/[email protected]
[6/10/2014 7:30:18 AM] [DEBUG] Cookie found in autodiscover response: StatusCode: 401, ReasonPhrase: 'Unauthorized', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
X-MS-WebTicketURL: https://lync01.mydomain.com/WebTicket/WebTicketService.svc
X-MS-WebTicketSupported: cwt,saml
X-MS-Server-Fqdn: LYNC01.mydomain.com
X-Content-Type-Options: nosniff
Date: Tue, 10 Jun 2014 11:30:18 GMT
Server: Microsoft-IIS/7.5
X-Powered-By: ASP.NET
Content-Length: 1293
Content-Type: text/html
[6/10/2014 7:30:18 AM] [DEBUG] Authorization required for https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/[email protected]
[6/10/2014 7:30:18 AM] [DEBUG] Obtaining WebTicket from https://lync01.mydomain.com/WebTicket/WebTicketService.svc
[6/10/2014 7:30:18 AM] [DEBUG] On-premises WebTicket server: https://lync01.mydomain.com/WebTicket/WebTicketService.svc/Auth
[6/10/2014 7:30:18 AM] [DEBUG] AcquireTicketAsync succeeded for https://lync01.mydomain.com/WebTicket/WebTicketService.svc/Auth
[6/10/2014 7:30:18 AM] [DEBUG] WebTicket: <saml:Assertion MajorVersion="1" MinorVersion="1" AssertionID="SamlSecurityToken-1b6331e1-4be5-4749-869a-21feb4b7198a" Issuer="https://lync01.mydomain.com/63b16135-930c-5e0b-998c-7ed6bc68b6f8" IssueInstant="2014-06-10T11:30:18.238Z"
xmlns:saml="urn:oasis:names:tc:SAML:1.0:assertion"><saml:Conditions NotBefore="2014-06-10T11:30:18.238Z" NotOnOrAfter="2014-06-10T19:20:24.238Z"><saml:AudienceRestrictionCondition><saml:Audience>https://lync01.mydomain.com/</saml:Audience></saml:AudienceRestrictionCondition></saml:Conditions><saml:AuthenticationStatement
AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:unspecified" AuthenticationInstant="2014-06-10T11:30:18.238Z"><saml:Subject><saml:NameIdentifier Format="http://schemas.xmlsoap.org/ws/2005/05/identity/claims/uri">sip:[email protected]</saml:NameIdentifier><saml:SubjectConfirmation><saml:ConfirmationMethod>urn:oasis:names:tc:SAML:1.0:cm:holder-of-key</saml:ConfirmationMethod><KeyInfo
xmlns="http://www.w3.org/2000/09/xmldsig#"><e:EncryptedKey xmlns:e="http://www.w3.org/2001/04/xmlenc#"><e:EncryptionMethod Algorithm="http://www.w3.org/2001/04/xmlenc#kw-aes256"></e:EncryptionMethod><KeyInfo><KeyName>63b16135-930c-5e0b-998c-7ed6bc68b6f8:8d152b04ce7ddbf</KeyName></KeyInfo><e:CipherData><e:CipherValue>NrQOUA0JAXMmR/4ACrZ8LyVN79jUZbR6Fz+sGlbAdWXgQF/u24DLlw==</e:CipherValue></e:CipherData></e:EncryptedKey></KeyInfo></saml:SubjectConfirmation></saml:Subject></saml:AuthenticationStatement><Signature
xmlns="http://www.w3.org/2000/09/xmldsig#"><SignedInfo><CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"></CanonicalizationMethod><SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"></SignatureMethod><Reference
URI="#SamlSecurityToken-1b6331e1-4be5-4749-869a-21feb4b7198a"><Transforms><Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature"></Transform><Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"></Transform></Transforms><DigestMethod
Algorithm="http://www.w3.org/2001/04/xmlenc#sha256"></DigestMethod><DigestValue>WnZZN/Vbfrget92urYd1+HmyXX/vYQ6CjHN4lLEXxK0=</DigestValue></Reference></SignedInfo><SignatureValue>BiFjeIuG7TW/DqIdklMNdaqRJLgbenphBcb51HGGH4WCdThgj2Oizkvfa6NRAwsE74qmyVLcfJIO2TK+if1yelHzUEde8ZvLwcruIFYWecK3OXDSDiGpYa3WdPwNUZrSRySSiCyb+fyYgz8BvZq3JjQRulOXnFhz4X3wXzoS6xMovmmVsOrdVTMjvT7l7ydEo1ucnEl5zjEnKih7WjCoElYENwEeG2HGf4Xqi43piaWXa9k7GY9k1idyrfJ7too+u7O7fhnhJ9OR0GR1KydbAPdSi5hmpZcziLn6xKCVW64w2bGCsT4N2vr+f5AhknSmjDa+9Wnyiar2uuLk+7eLmQ==</SignatureValue><KeyInfo><o:SecurityTokenReference
xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"><o:KeyIdentifier ValueType="http://docs.oasis-open.org/wss/oasis-wss-soap-message-security-1.1#ThumbprintSHA1">/YVCIdf+YFyKopRflv61uWov2vs=</o:KeyIdentifier></o:SecurityTokenReference></KeyInfo></Signature></saml:Assertion>
[6/10/2014 7:30:18 AM] [DEBUG] Sending HTTP request to https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/[email protected]
[6/10/2014 7:30:18 AM] [DEBUG] Cookie found in autodiscover response: StatusCode: 200, ReasonPhrase: 'OK', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Pragma: no-cache
X-MS-Server-Fqdn: LYNC01.mydomain.com
X-Content-Type-Options: nosniff
Cache-Control: no-cache
Date: Tue, 10 Jun 2014 11:30:18 GMT
Server: Microsoft-IIS/7.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Content-Length: 1646
Content-Type: application/vnd.microsoft.rtc.autodiscover+xml; v=1
Expires: -1
[6/10/2014 7:30:18 AM] [DEBUG] Parsing the response for URL https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/[email protected]. Full response: <?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" AccessLocation="Internal"><User><SipServerInternalAccess fqdn="LYNC01.mydomain.com" port="5061" /><SipClientInternalAccess fqdn="LYNC01.mydomain.com" port="5061" /><SipServerExternalAccess
fqdn="AccessEdge.mydomain.com" port="5061" /><SipClientExternalAccess fqdn="AccessEdge.mydomain.com" port="443" /><Link token="Internal/Autodiscover" href="https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root" /><Link token="Internal/AuthBroker"
href="https://lync01.mydomain.com/Reach/sip.svc" /><Link token="Internal/WebScheduler" href="https://lync01.mydomain.com/Scheduler" /><Link token="External/Autodiscover" href="https://lync.mydomain.com/Autodiscover/AutodiscoverService.svc/root"
/><Link token="External/AuthBroker" href="https://lync.mydomain.com/Reach/sip.svc" /><Link token="External/WebScheduler" href="https://lync.mydomain.com/Scheduler" /><Link token="Internal/Mcx" href="https://lync01.mydomain.com/Mcx/McxService.svc"
/><Link token="External/Mcx" href="https://lync01.mydomain.com/Mcx/McxService.svc" /><Link token="Ucwa" href="https://lync.mydomain.com/ucwa/v0/applications" /><Link token="Internal/Ucwa" href="https://lync01.mydomain.com/ucwa/v0/applications"
/><Link token="External/Ucwa" href="https://lync.mydomain.com/ucwa/v0/applications" /><Link token="Self" href="https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/user" /></User></AutodiscoverResponse>
[6/10/2014 7:30:18 AM] [INFO] Server discovery has completed for http://lyncdiscoverinternal.mydomain.com/.
[6/10/2014 7:30:18 AM] [DEBUG] Autodiscover full response for URL http://lyncdiscoverinternal.mydomain.com/ is <?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
AccessLocation="Internal"><User><SipServerInternalAccess fqdn="LYNC01.mydomain.com" port="5061" /><SipClientInternalAccess fqdn="LYNC01.mydomain.com" port="5061" /><SipServerExternalAccess fqdn="AccessEdge.mydomain.com" port="5061"
/><SipClientExternalAccess fqdn="AccessEdge.mydomain.com" port="443" /><Link token="Internal/Autodiscover" href="https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root" /><Link token="Internal/AuthBroker" href="https://lync01.mydomain.com/Reach/sip.svc"
/><Link token="Internal/WebScheduler" href="https://lync01.mydomain.com/Scheduler" /><Link token="External/Autodiscover" href="https://lync.mydomain.com/Autodiscover/AutodiscoverService.svc/root" /><Link token="External/AuthBroker" href="https://lync.mydomain.com/Reach/sip.svc"
/><Link token="External/WebScheduler" href="https://lync.mydomain.com/Scheduler" /><Link token="Internal/Mcx" href="https://lync01.mydomain.com/Mcx/McxService.svc" /><Link token="External/Mcx" href="https://lync01.mydomain.com/Mcx/McxService.svc"
/><Link token="Ucwa" href="https://lync.mydomain.com/ucwa/v0/applications" /><Link token="Internal/Ucwa" href="https://lync01.mydomain.com/ucwa/v0/applications" /><Link token="External/Ucwa" href="https://lync.mydomain.com/ucwa/v0/applications"
/><Link token="Self" href="https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/user" /></User></AutodiscoverResponse>
[6/10/2014 7:30:18 AM] [DEBUG] SendRequest failed for https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root/[email protected]
[6/10/2014 7:30:18 AM] [INFO] Automatic discovery results for http://lyncdiscoverinternal.mydomain.com/
[6/10/2014 7:30:18 AM] [INFO] Access Location : Internal
[6/10/2014 7:30:18 AM] [INFO] SIP Server Internal Access : LYNC01.mydomain.com
[6/10/2014 7:30:18 AM] [INFO] SIP Server External Access : AccessEdge.mydomain.com
[6/10/2014 7:30:18 AM] [INFO] SIP Client Internal Access : LYNC01.mydomain.com
[6/10/2014 7:30:18 AM] [INFO] SIP Client External Access : AccessEdge.mydomain.com
[6/10/2014 7:30:18 AM] [INFO] Internal Auth broker service : https://lync01.mydomain.com/Reach/sip.svc
[6/10/2014 7:30:18 AM] [INFO] External Auth broker service : https://lync.mydomain.com/Reach/sip.svc
[6/10/2014 7:30:18 AM] [INFO] Internal Auto discover service : https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root
[6/10/2014 7:30:18 AM] [INFO] External Auto discover service : https://lync.mydomain.com/Autodiscover/AutodiscoverService.svc/root
[6/10/2014 7:30:18 AM] [INFO] Internal MCX service : https://lync01.mydomain.com/Mcx/McxService.svc
[6/10/2014 7:30:18 AM] [INFO] External MCX service : https://lync01.mydomain.com/Mcx/McxService.svc
[6/10/2014 7:30:18 AM] [INFO] Internal UCWA service : https://lync01.mydomain.com/ucwa/v0/applications
[6/10/2014 7:30:18 AM] [INFO] External UCWA service : https://lync.mydomain.com/ucwa/v0/applications
[6/10/2014 7:30:18 AM] [INFO] Internal Webscheduler service : https://lync01.mydomain.com/Scheduler
[6/10/2014 7:30:18 AM] [INFO] External Webscheduler service : https://lync.mydomain.com/Scheduler
[6/10/2014 7:30:18 AM] [INFO] Total server discovery time: 0.1 seconds
[6/10/2014 7:30:18 AM] [SUMMARY_SUCCESS] Server discovery succeeded for unsecure (HTTP) internal channel against URL http://lyncdiscoverinternal.mydomain.com/
[6/10/2014 7:30:18 AM] [SUBHEADING] Starting automatic discovery for secure (HTTPS) external channel
[6/10/2014 7:30:18 AM] [DEBUG] Sending HTTP request to https://lyncdiscover.mydomain.com/[email protected]
[6/10/2014 7:30:39 AM] [DEBUG] Exception encountered while sending an HTTP request to https://lyncdiscover.mydomain.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException:
An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period
of time, or established connection failed because connected host has failed to respond 205.XXX.XXX.94:443
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
[6/10/2014 7:30:39 AM] [ERROR] An error occurred while sending the request.
Unable to connect to the remote server
A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 205.XXX.XXX.94:443
[6/10/2014 7:30:39 AM] [INFO] For troubleshooting, try using a browser to open the server discovery URL https://lyncdiscover.mydomain.com/[email protected]
[6/10/2014 7:30:39 AM] [DEBUG] System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed
because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 205.XXX.XXX.94:443
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
[6/10/2014 7:30:39 AM] [SUMMARY_ERROR] Server discovery failed for secured external channel against https://lyncdiscover.mydomain.com/
[6/10/2014 7:30:39 AM] [SUBHEADING] Starting automatic discovery for unsecure (HTTP) external channel
[6/10/2014 7:30:39 AM] [DEBUG] Sending HTTP request to http://lyncdiscover.mydomain.com/[email protected]
[6/10/2014 7:31:00 AM] [DEBUG] Exception encountered while sending an HTTP request to http://lyncdiscover.mydomain.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException:
An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period
of time, or established connection failed because connected host has failed to respond 205.XXX.XXX.94:80
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
[6/10/2014 7:31:00 AM] [ERROR] An error occurred while sending the request.
Unable to connect to the remote server
A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 205.XXX.XXX.94:80
[6/10/2014 7:31:00 AM] [INFO] For troubleshooting, try using a browser to open the server discovery URL http://lyncdiscover.mydomain.com/[email protected]
[6/10/2014 7:31:00 AM] [DEBUG] System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed
because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 205.XXX.XXX.94:80
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
[6/10/2014 7:31:00 AM] [SUMMARY_ERROR] Server discovery failed for unsecured external channel against http://lyncdiscover.mydomain.com/
[6/10/2014 7:31:00 AM] [DEBUG] None, AutoExternalSecureD, AutoExternalUnsecureD, ManualDNSFail, ManualSecureD, ManualUnsecureD, AuthBrokerInternalLMXCheckGET, AuthBrokerInternalLMXCheckPOST, AuthBrokerExternalLMXCheckGET, AuthBrokerExternalLMXCheckPOST, MobilityMCXInternalLMXCheckGET,
MobilityMCXInternalLMXCheckPOST, MobilityMCXExternalLMXCheckGET, MobilityMCXExternalLMXCheckPOST, LMXSIPServerInternalDNS, LMXSIPServerExternalDNS, MobilityUCWAInternalCheckPOST, MobilityUCWAExternalCheckPOST
[6/10/2014 7:31:00 AM] [SUMMARY]
[6/10/2014 7:31:00 AM] [SUMMARY_ERROR] Automatic discovery meant for external network access failed. Please verify the server requirements at http://go.microsoft.com/fwlink/?LinkId=278998 .
[6/10/2014 7:31:00 AM] [SUMMARY] Automatic discovery meant for internal network access succeeded from an external network which could be a potential security concern.
[6/10/2014 7:31:00 AM] [MAINHEADING] Starting the requirement tests for Lync Mobile 2010 App
[6/10/2014 7:31:00 AM] [INFO] Please wait; this test may take several minutes to complete...
[6/10/2014 7:31:00 AM] [INFO] Testing the app requirements using the following discovery response:
[6/10/2014 7:31:00 AM] [INFO] Access Location : Internal
[6/10/2014 7:31:00 AM] [INFO] SIP Server Internal Access : LYNC01.mydomain.com
[6/10/2014 7:31:00 AM] [INFO] SIP Server External Access : AccessEdge.mydomain.com
[6/10/2014 7:31:00 AM] [INFO] SIP Client Internal Access : LYNC01.mydomain.com
[6/10/2014 7:31:00 AM] [INFO] SIP Client External Access : AccessEdge.mydomain.com
[6/10/2014 7:31:00 AM] [INFO] Internal Auth broker service : https://lync01.mydomain.com/Reach/sip.svc
[6/10/2014 7:31:00 AM] [INFO] External Auth broker service : https://lync.mydomain.com/Reach/sip.svc
[6/10/2014 7:31:00 AM] [INFO] Internal Auto discover service : https://lync01.mydomain.com/Autodiscover/AutodiscoverService.svc/root
[6/10/2014 7:31:00 AM] [INFO] External Auto discover service : https://lync.mydomain.com/Autodiscover/AutodiscoverService.svc/root
[6/10/2014 7:31:00 AM] [INFO] Internal MCX service : https://lync01.mydomain.com/Mcx/McxService.svc
[6/10/2014 7:31:00 AM] [INFO] External MCX service : https://lync01.mydomain.com/Mcx/McxService.svc
[6/10/2014 7:31:00 AM] [INFO] Internal UCWA service : https://lync01.mydomain.com/ucwa/v0/applications
[6/10/2014 7:31:00 AM] [INFO] External UCWA service : https://lync.mydomain.com/ucwa/v0/applications
[6/10/2014 7:31:00 AM] [INFO] Internal Webscheduler service : https://lync01.mydomain.com/Scheduler
[6/10/2014 7:31:00 AM] [INFO] External Webscheduler service : https://lync.mydomain.com/Scheduler
[6/10/2014 7:31:00 AM] [SUBHEADING] Starting tests for Mobility (MCX) service
[6/10/2014 7:31:00 AM] [INFO] Verifying internal Mobility (MCX) service: https://lync01.mydomain.com/Mcx/McxService.svc
[6/10/2014 7:31:00 AM] [INFO] Successfully obtained the WS-Metadata Exchange (MEX) document using GET. The service did not require authorization.
[6/10/2014 7:31:00 AM] [INFO] Verifying external Mobility (MCX) service: https://lync01.mydomain.com/Mcx/McxService.svc
[6/10/2014 7:31:00 AM] [INFO] Successfully obtained the WS-Metadata Exchange (MEX) document using GET. The service did not require authorization.
[6/10/2014 7:31:00 AM] [INFO] Verifying internal Mobility (MCX) service: https://lync01.mydomain.com/Mcx/McxService.svc
[6/10/2014 7:31:00 AM] [WARNING] Failed to obtain the WS-Metadata Exchange (MEX) document using POST for https://lync01.mydomain.com/Mcx/McxService.svc/mex. The service did not require authorization.
[6/10/2014 7:31:00 AM] [INFO] Verifying external Mobility (MCX) service: https://lync01.mydomain.com/Mcx/McxService.svc
[6/10/2014 7:31:00 AM] [WARNING] Failed to obtain the WS-Metadata Exchange (MEX) document using POST for https://lync01.mydomain.com/Mcx/McxService.svc/mex. The service did not require authorization.
[6/10/2014 7:31:00 AM] [SUMMARY] Completed tests for Mobility (MCX) service
[6/10/2014 7:31:00 AM] [DEBUG] None, AutoExternalSecureD, AutoExternalUnsecureD, ManualDNSFail, ManualSecureD, ManualUnsecureD, AuthBrokerInternalLMXCheckGET, AuthBrokerInternalLMXCheckPOST, AuthBrokerExternalLMXCheckGET, AuthBrokerExternalLMXCheckPOST, MobilityMCXInternalLMXCheckPOST,
MobilityMCXExternalLMXCheckPOST, LMXSIPServerInternalDNS, LMXSIPServerExternalDNS, MobilityUCWAInternalCheckPOST, MobilityUCWAExternalCheckPOST
[6/10/2014 7:31:00 AM] [SUMMARY]
[6/10/2014 7:31:00 AM] [SUMMARY_SUCCESS]
Your deployment meets the minimum requirements for Lync Mobile 2010 App.
Maybe you are looking for
-
Happy new years guys... Here's the deal...like most people I have all my music set-up with smart playlists so that the higher rated songs play more often and "Last Played" is not in the last 2 months. My question is this...Is there a way to lock song
-
Problem with Stub-Check-Stub in PLD
I'm trying to format the Stub-Check-Stub Print Layout in checks for payment to fit the existing A/P checks a client has. The top stub is fine but the check and second stub print too low. I want to adjust the Height of the repetitiveFooterzer. I ch
-
Repost: Oracle VM Manager (IndexError: list index out of range) error
The Oracle VM Manager software will not import a server side created VM for management purposes. It is giving an index-out-of-range error when trying to retrieve the Memory Size from the jumpbox.xen file (I created a symbolic link to this file called
-
Unsupported image format after using external editor
A new twist (for me) on the familiar unsupported image format problem: On my MacBook Pro (running Aperture 2.1.4) I export an image to PS as a 16 bit TIFF 300 dpi to work on it; when I'm done it comes back as a TIFF. But Aperture won't open the edite
-
Hi, I created the Export excise invoice. Here in Excise ivoice, BED and ECS are coming as 0.00. after that I created the ARE-1 and saved.? I want to know wt is the next process? how we can claim excise duty from authoraties.? regards, jyothi. Edited