IP Communicator - Auto Update

Hi,
Am i correct in thinking that for the IP Communicator AutoUpdate featur to work I have to run the CiscoIPCommunicatorSetup.exe on the call manager (TFTP server) itself?
I have already run the Admin tool, but I need to get the image onto the tftp server (and presumably in the correct path).
Has anyone got this update feature working?
Thanks,
Peter

Sorry but is no longer available in that version, take a look to the Realease Notes:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipc/ipc20_1a.htm#wp2458576
"Auto Update Not Supported from Cisco IP Communicator release 1.x to 2.0
AutoUpdate is part of the Cisco IP Communicator software that helps you automatically
update Cisco IP Communicator. Every time Cisco IP Communicator registers with a Cisco
Unified CallManager, AutoUpdate compares Cisco IP Communicator's current software load
with the version in the configuration file. AutoUpdate downloads and installs new software
components from the TFTP server when it detects that they are available.
Auto Update is currently not supported for updates from Cisco IP Communicator Release 1.x
to Cisco IP Communicator Release 2.0(1). You must use the installer to upgrade from Cisco
IP Communicator Release 1.x to Cisco IP Communicator Release 2.0(1)."
If you want to stop the messages that the AutoUpdate is failing you need to go to the
CCMAdmin on the CallManager server and go to System --> Device Defaults, you need to
erase whatever you have in the Load Information field on the IP Communicator.
HTH
//Jorge

Similar Messages

How to auto update a section on all pages.

Hi,
I have a section on the right hand side of a website I'm developing containing txt and it's controlled by CSS which also appears on all the other pages, so what I want to be able to do is when I add a new bit of text to it on one page it will auto update with the new txt on all the other pages to save me copying and pasting the same bit of txt on all the pages.
Hope that made sense and hope someone can help.
Thanks

You can use Dreamweaver Templates or use serverside include. (SSI)
Using the template function within Dreamweaver is a good way to go if it's a small site . .
For larger sites then serverside includes would be more practical and earlier for maintenance purposes.
Templates:
You create a master template page, you declare which areas will be the same for every page, (non-editable regions) and then declare an area that will change on every page (the content area) , these are editable regions.
Once you create the template and save it, you are then able to create 'child' pages from this template - as many as you like :-) If you every need to make a change to the menu or the footer or the header, change it in the master template, save it and the changes will flow through to the child pages created from the template.
Using DW Templates:
http://www.adobe.com/devnet/dreamweaver/templates.html
http://www.adobe.com/devnet/dreamweaver/articles/dw_templates.html
The other option is to use Server Side Includes (SSI)
A bit more about SSIs here:
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f 693f21-7b6ca.html
http://bignosebird.com/ssi.shtml
One major difference between using Templates and SSI?
When you make a change to a template page, you will need to re-upload all the pages to the server that were changed - may become very tedious if it is a very large site.
With using SSI, you make a change to one file and only have to upload the one file and all pages on the server will be update accordingly.
When to use Templates, Library Items & SSIs -
http://www.adobe.com/devnet/dreamweaver/articles/ssi_lbi_template.html
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

Air Auto Update Error -- Flash Builder Burrito.

This is my first attempt at this, so I may be missing something simple.
I'm not having any luck getting an Air app to automatically update.
If I manually go to http://localhost/air1/air1.air and redownload the file I will get a popup that asks if I want to update the app, but when I say ok I get this error.
"There was an error checking for updates. Error# 16816"
I haven't found a reason yet,
Any ideas?
update.xml
<?xml version="1.0" encoding="UTF-8"?>
<update xmlns="http://ns.adobe.com/air/framework/update/description/2.5">
<version>2.0</version>
<url>http://localhost/air1/air1.air</url>
<description>1.0 - First version</description>
</update>
file -- air1.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                       xmlns:s="library://ns.adobe.com/flex/spark"
                       xmlns:mx="library://ns.adobe.com/flex/mx"
                       applicationComplete="init()">
    <fx:Declarations>
        
    </fx:Declarations>
    <fx:Script>
        <![CDATA[
            import air.update.events.UpdateEvent;
            import air.update.ApplicationUpdaterUI;
            import mx.controls.Alert;
            protected var appUpdater:ApplicationUpdaterUI = new ApplicationUpdaterUI(); // Used for auto-update
            protected function init():void
                // Check for update
                this.checkUpdate();
                Alert.show("checking update");
            // This function is triggered when the application finished loading.
            // Initialize appUpdater and set some properties
            protected function checkUpdate():void
                // set the URL for the update.xml file
                appUpdater.updateURL = "http://localhost/air1/update.xml";
                appUpdater.addEventListener(UpdateEvent.INITIALIZED, onUpdate);
                appUpdater.addEventListener(ErrorEvent.ERROR, onUpdaterError);
                // Hide the dialog asking for permission for checking for a new update.
                // If you want to see it just leave the default value (or set true).
                appUpdater.isCheckForUpdateVisible = true;
                appUpdater.initialize();
            // Handler function triggered by the ApplicationUpdater.initialize.
            // The updater was initialized and it is ready to take commands.
            protected function onUpdate(event:UpdateEvent):void
                // start the process of checking for a new update and to install
                appUpdater.checkNow();
            // Handler function for error events triggered by the ApplicationUpdater.initialize
            protected function onUpdaterError(event:ErrorEvent):void
                Alert.show(event.toString());
        ]]>
    </fx:Script>
    <s:Button x="47" y="55" label="Button"/>
    <mx:ColorPicker x="61" y="119"/>
    <s:ComboBox x="77" y="216"/>
    <s:ComboBox x="77" y="185"/>
    <s:ComboBox x="77" y="154"/>
</s:WindowedApplication>
file -- air1-app.xml
<?xml version="1.0" encoding="utf-8" standalone="no"?>
<application xmlns="http://ns.adobe.com/air/application/2.5">

    
    <id>air1</id>
    
    <filename>air1</filename>
    
    <name>air1</name>
    
    <versionNumber>2.0.0</versionNumber>
    
    
    
    
    
    
    
    
    
    <initialWindow>
        
        
        <content>[This value will be overwritten by Flash Builder in the output app.xml]</content>
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
    <autoOrients>false</autoOrients>
    <fullScreen>false</fullScreen>
    <visible>false</visible>
</initialWindow>
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
        
        
            
            
            
            
            
            
            
            
            
            
        
    
    
    
    
</application>

This appears to be a Flex question. Please try posting to the Flex forums here http://forums.adobe.com/community/flex/flex_general_discussion for better response.

AnyConnect failing to auto-update upon connecting, requires a re-install

We recently upgraded our 5510 at one of our clients to ASA software version 9.1(5), and after that was up and running and stable, we decided to upload the newest AnyConnect package files to the firewall for VPN users to get updated to the latest version.
The VPN connection is setup with radius authentication, and it has been working perfectly for a few weeks now. But just to add, when we had 8.2(5) software on the ASA and would put newer versions of the web deployment package on the ASA, clients trying to connect via VPN would auto-update without a problem. Same with Mac's.
So with the new software on the ASA, I ran a test from my home office, I uninstalled AnyConnect and installed an older version, 2.5.x. I then tried to connect via VPN with the thought that it would automatically update my VPN client to the version of the client on the ASA which is 3.1.05178. I watched it connect, ask for my active directory credentials, it would connect, then check for updates, and then say it was downloading an update. Shortly after, AnyConnect popped up a window saying "The VPN Client Agent was unable to create the interprocess communication depot." and I have to click Ok. Basically what happens here - http://www.itsystemadmin.com/the-vpn-client-agent-was-unable-to-create-interprocess/ but I do not have ICS turned on on the network adapter or any of my network adapters.
After clicking ok, it shows me the AnyConnect window, but the program is now partially non-functional, it is there, but the connection address is gone and if I enter it and click "Connect" it gives me an error immediately.
What I then have to do is go onto the ASA, remove that newer package and upload an older one. Then I re-install the VPN agent on my computer and re-connect, it doesn't find any update because I'm now running a newer version on my computer than the one that is on the ASA, and it connects fine.
I've tested this with a few employee laptops and they experience the same thing. I'm not sure if there is something that isn't compatible between this latest ASA software and the 5510, or what the issue is. I have tried putting slightly older versions of the web deployment package on the ASA and I still get the same problem. The problem is when the client computer is running an older version of AnyConnect and the ASA has a newer version, it fails upon initial connection and ruins the AnyConnect program and it has to be re-installed.

Feel lucky. Lot of people are having wifi problems with 8.x.
You should try to update from iTunes. iTunes requires less space on your machine for the update.
Robert

No Auto-Update for To Do list, session message and toast message

After LC ES Server hardening, we noticed that auto-update is not working for To Do list, session message and new task notification toast message. Before server hardening, all of them are still working fine.
Does anyone know why auto-update is not working after server hardening? Is there any specific port numbers which need to be enabled/opened to solve this issue?
FYI, we also noticed that some RemoteEventClient error messages occur many times in jboss server.log file as the following:
--- LOG QUOTE START ---
2008-01-10 15:26:16,086 INFO [STDOUT]
GMS: address is neptune:[MULTIPLE VARIOUS PORT NO]
2008-01-10 15:26:19,398 INFO [com.adobe.livecycle.remoteevents.client.RemoteEventClient] Client JGroup initialization failed to connect to service JGroup. Service JGroup initialization may not be complete, retrying...
2008-01-10 15:26:20,414 INFO [com.adobe.livecycle.remoteevents.client.RemoteEventClient] com.adobe.livecycle.remoteevents.client.RemoteEventClient$RemoteEventReceiver using JGroups config UDP(bind_addr=10.77.250.248;mcast_addr=238.42.102.134;mcast_port=42707;ip_ttl=8):PING(tim eout=3000;num_initial_members=6):FD(timeout=3000):VERIFY_SUSPECT(timeout=1500):pbcast.NAKA CK(gc_lag=10;retransmit_timeout=600,1200,2400,4800):UNICAST(timeout=600,1200,2400,4800):pb cast.STABLE(desired_avg_gossip=10000):FRAG:pbcast.GMS(join_timeout=5000;join_retry_timeout =2000;shun=true;print_local_addr=true):VIEW_ENFORCER
2008-01-10 15:28:21,216 INFO [STDOUT]
GMS: address is neptune:3874
2008-01-10 15:28:24,528 ERROR [com.adobe.livecycle.remoteevents.client.RemoteEventClient] Client JGroup initialization failed to connect to service JGroup. Maximum retries exceeded.
2008-01-10 15:28:24,528 INFO [STDOUT] Jan 10, 2008 3:28:24 PM com.adobe.workspace.events.RemoteEventClientLifeCycle$RemoteEventInitThread run
SEVERE: null
com.adobe.livecycle.remoteevents.client.RemoteEventConnectionFailedException
at com.adobe.livecycle.remoteevents.client.RemoteEventClient$RemoteEventReceiver.<init>(Remo teEventClient.java:213)
at com.adobe.livecycle.remoteevents.client.RemoteEventClient$RemoteEventReceiver.getReceiver (RemoteEventClient.java:159)
at com.adobe.livecycle.remoteevents.client.RemoteEventClient.<init>(RemoteEventClient.java:3 61)
at com.adobe.workspace.events.RemoteEventClientLifeCycle$RemoteEventInitThread.run(RemoteEve ntClientLifeCycle.java:65)
at java.lang.Thread.run(Thread.java:595)
--- LOG QUOTE END ---

JGroups is an open source project that allows processes to send messages to one another. LiveCycle data services uses it for its messaging implementation (basically it configures the server to multicast messages to all the listening clients...even in a clustered environment across different LAN/WAN).
In most cases the default configuration will work fine, the problem is that if you are running a firewall on the server (or your local machine...i.e. windows firewall) the ports that JGroups uses for its communications can be blocked. In a local environment its easy enough to disable windows firewall and bounce your server to get things working.
In a production environment you need to open the ports that JGroups is using. These settings are in the Global Administration settings (as mentioned by WorkspaceUser above). If you export it and look at the JChannelConnectionProperties you'll see the ports its using and you can set your firewall to allow communication to those ports.
Bryan

Auto updates

ok. im new to the forum. i searched the topic. and was a little confused on the answers i found. so heres my deal.
i have itunes for windows xp. and a 5th gen ipod.
when the ipod is connected it says i have software version 1.2.1 and im pretty sure i have the latest version of itunes.
my problem is, that i usually used to use auto update with no problems.
but ive been takin my ipod to my friends and trying to use it thru his computer during partys. but it wouldnt work since i hade auto updates on.
so i tried turning it off. and have had trouble with my ipod syncing up with my i tunes library.
rite now its syining up, but says its only loading 4200 songs, and i have just over 6000 in my library. its done this several times.
im wondering whats causing this....
i would like to be able to sync up to my itunes before i change it to manual updates so that when i plug into my friends comp. i can get some of his music.
and when i use auto updates. im pretty sure that every song is checked.
i hope my question is clear....
any help?
thanks
-corey

Hi Jechternacht,
Welcome to Lenovo Community Forums
The Auto update is one and the same as the Windows Update which feature is provided in all OS (Operating System), Embedded with the Lenovo Solution Center is an auto update feature that will automatically notify users to install the latest version of software & Updates required for the computer. To perform this click on the popup message and proceed as per the instructions displayed.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Windows 8 auto updates

I purchased an ACER laptop with windows 8 last week. I was previously using a laptop with Vista.
Last night when I decided to shut down, I noticed the message indicating updates were being downloaded and I should not shut down until completed. I've never been happy with auto updates. In my opinion if it's not broken don't fix it. I always think that
updates should be decided by the end user, after all they own the computer, not Windows. However, when I turned on the laptop this morning and after the updates had been installed I noticed the Internet Explorer icon had disappeared from the desk top/task
bar. Then appeared a screen telling me to chose which browser I wanted to install. Why should this appear when I already had a browser installed which worked? I had to find the Internet Explorer in the Program files on the C drive and recreate the pin to the
task bar. I'm 63 years old and not an expert but I did figure out how to do this. However, I have friends some older than me who wouldn't have had a clue how to do this and would have had to call for help to recover this. Why on earth did that windows update
do this ludicrous update?

you can goto control panel --> Window Update --> Change setting (on left) --> Select Check the updates and let me choose weather to download and install them.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Anyone know how to disable Quicktime 7.67.75 auto updates in Windows 7?

copying quicktime.qtp file to User's profile worked for XP but didn't work for windows 7.
anyone know how to disable Quicktime 7.67.75 auto updates under Windows 7?

http://answers.microsoft.com/en-us/windows/forum/windows_7-security/block-usb-for-user-accounts-in-windows-7/3f1488cb-7335-4583-9fd5-d610c09cbd91
http://social.technet.microsoft.com/Forums/en-US/e2032451-7c54-4d03-a229-68bb6f56f4f2/how-to-restrict-access-to-usb-storage-devices-on-windows-7-except-administrator?forum=w7itprogeneral
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Clicking the "Preview" checkbox doesn't Auto-Update

Hello,
Been searching for a few days and haven't found anything on this subject.
When using any of the Transform functions and clicking the "preview" checkbox at the bottom to see what your change would look like doesn't auto-update itself. You have to click it again, so it turns off, and in the interim, it shows a blip of what it would look like. Then, reclick it and you can now see your potential result.
Is this a known issue? I am using Photoshop CC on Mavericks.

m,
I believe you should ask in the Photoshop forum:
http://forums.adobe.com/community/photoshop

Data auto updating

I am interested in knowing whether or not data can be
automatically updated in Captivate 3. Let's say I created a
PowerPoint presentation and imported it to Captivate. I then
realize information in the PowerPoint presentation needs to be
changed. Is it possible to make the changes in PowerPoint (or
Photoshop or whatever app you used) and then have those changes
automatically updated in Captivate? It seems like such a hassle to
update changes in another app, import the changes into Captivate,
and then delete the previous version from Captivate.
Thanks,
dcmediaman

Welcome to our community, Darin
Sorry, but that functionality doesn't yet exist in Captivate.
Not from PowerPoint. If you update PowerPoint, you have to
re-import to see the changes. Photoshop is a bit different. You are
able to edit the image from the library. When you save, the image
is often updated. If not, you are able to right-click and choose to
update to pull in changes.
If you would like to suggest something like an auto update
for PowerPoint be added, please consider using the Wish Form.
Click
here to view the WishForm/Bug Reporting Form
Cheers... Rick

Disable auto update

Hi
I have a couple of databases running on Azure SQL. They all are the Basis Edition.
I'm experiencing that two of these databases keep being upgraded to Web Edition. When I scale them down to basis edition or even Standard S1 edition, one of them gets auto scaled to Web Edition.
I don't know why this occours and I would like to have it stopped. I'm not sure as to whether there is a disable auto update functionality at manage.windowsazure.com. Neither am I sure if there is some setting in my ASP.NET Web.Config that will do the trick.
Help would be appreaciated.

Hi adksmm,
Usually, in SQL Azure database platform, we can change service tiers using Azure Management Portal, PowerShell, or T-SQL statement, or REST API . If you want to modify a database via T-SQL statement in SQL
Azure database, you must be connected to the master database to alter a database. If MAXSIZE is set to a value of 1 GB or 5 GB and EDITION is not specified, the database edition will automatically be set to Web Edition. For more information,
see: http://msdn.microsoft.com/en-us/library/ff394109.aspx
If you choose downgrade to a lower service tier via Azure Management Portal, you need to manually change the edition options, performance level via GUI. In addition, if you can write Azure PowerShell command to
specify the service tier, the performance level, and the maximum size for the database. However, there is no auto update functionality or option for you disabling them at SQL Azure database platform. For more information about changing
database service tiers and performance levels, you can revies the following article.
http://msdn.microsoft.com/en-us/library/azure/dn369872.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

WRVS4400NV2 IPS now blocking Cisco IPS Auto Update Server

Yesterday I noted that my ASA5505 AIP-SSC5 card was failing to auto update as it had been doing without issue for months. I looked in the logs and the IPS was showing an HTTP Error when attempting to update. I checked and nothing had changed in the IPS configuration. Then, on a hunch, I checked the IPS log of the WRVS4400N which is the edge router for the small business network.
The WRVS4400N IPS was blocking connections with the cisco auto update server because it detected an RPC Anomaly in the traffic. So apparently, something has changed in the cisco IPS auto update server (https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.pl) response that the cisco small business router misidentifies as a threat. . .
FYI-I also posted this issue to the small business router community discussion forum.

Yesterday I noted that my ASA5505 AIP-SSC5 card was failing to auto update as it had been doing without issue for months. I looked in the logs and the IPS was showing an HTTP Error when attempting to update. I checked and nothing had changed in the IPS configuration. Then, on a hunch, I checked the IPS log of the WRVS4400N which is the edge router for the small business network.
The WRVS4400N IPS was blocking connections with the cisco auto update server because it detected an RPC Anomaly in the traffic. So apparently, something has changed in the cisco IPS auto update server (https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.pl) response that the cisco small business router misidentifies as a threat. . .
FYI-I also posted this issue to the small business router community discussion forum.

How to disable auto update jre-6u20 by script

Hi,
our users can not update java, because of domain-restrictions.
So they should not become the notification.
How can we disable auto update for version jre-6u20 by script?

Trying to figure out the same thing. I came across the following two links but I don't think they will disable the updates to community help itself. So from what I can gather you need to do the following:
Turn off autoupdates to AIR (See below)
Turn off updates to Community Help (No clue how to do this)
Install Local content (See below)
Disables updates to AIR
http://help.adobe.com/en_US/air/admin/WS485a42d56cd1964167ea49bd124ef17d52a-7ff5.html#WS48 5a42d56cd1964167ea49bd124ef17d52a-7ff2
Turn off internet access/help and copy local help
http://kb2.adobe.com/cps/849/cpsid_84992.html
Turn off internet access (not sure if you need to do this one and the one above or just the one above)
http://kb2.adobe.com/cps/846/cpsid_84665.html
You can download the latest version of AIR and Community Help.
Link to latest version of community help
http://www.adobe.com/support/chc/
Hopes this helps.

How to disable auto update for corporate installation

I've scoured the forums for this information and was not successful locating a viable answer.
We need to update 1500 corporate clients to the latest version of QT, but we need the auto update feature turned off when the upgrade is complete. We do this for two reasons: 1) Users do not have permissions to run the installer, so even if they wanted to run the update they would be unsuccessful, and 2) we need to test any updates before they are distributed to the general population.
For past versions we created a QTP file with the auto update turned off, then placed it into the C:\documents and settings\all users\application date\apple computer\quicktime folder. This method is no longer successful.
Changing the settings for each individual user is not an option, we need a method that will change the setting for any past, current, or future user on all of our computers.
Any guidance is appreciated.

Trying to figure out the same thing. I came across the following two links but I don't think they will disable the updates to community help itself. So from what I can gather you need to do the following:
Turn off autoupdates to AIR (See below)
Turn off updates to Community Help (No clue how to do this)
Install Local content (See below)
Disables updates to AIR
http://help.adobe.com/en_US/air/admin/WS485a42d56cd1964167ea49bd124ef17d52a-7ff5.html#WS48 5a42d56cd1964167ea49bd124ef17d52a-7ff2
Turn off internet access/help and copy local help
http://kb2.adobe.com/cps/849/cpsid_84992.html
Turn off internet access (not sure if you need to do this one and the one above or just the one above)
http://kb2.adobe.com/cps/846/cpsid_84665.html
You can download the latest version of AIR and Community Help.
Link to latest version of community help
http://www.adobe.com/support/chc/
Hopes this helps.

Firefox auto-update bounces back end forth between 3.6.11 and 3.6.12

Firefox keeps going through the following apparently endless cycle: It realizes it's not on the latest version and auto-updates from 3.6.11 to 3.6.12. Everything is fine for a few uses, then it tells me it needs to reboot to complete an update, upon which its "completion" of the update results in it reverting back to 3.6.11. After a few uses of that version the entire cycle repeats (It again wants to install an update to 3.6.12)... and so it continues

You can check for a problem with the prefs.<br />
See http://kb.mozillazine.org/Preferences_not_saved

IP Communicator - Auto Update

Similar Messages

Maybe you are looking for