IPad 2 and Apple TV video and slideshows

I have an Apple TV that works well with Netflix or showing photos from my iPad or iPhone. But if I try to stream a slideshow or a video from my iPad, MacMini, or iPhone, all I get is the first image and a whirling wheel and the slideshow or video never plays.
I am using an Apple Airport Extreme and a Airport Express to extend the network. We have 2 iPads in the home, plus 3 iPhones and 1 iPod Touch. Is the network just overloaded? Is there something I should do to correct the network?

Note: not all apps are enabled for airplay. Now if you're referring to the Photo and iPod app those should work. Have you tried restarting the apps? Rebooting the device? I assume both are on the same network?
See if this helps as well
http://support.apple.com/kb/HT4437

Similar Messages

  • When I stream videos from my laptop onto my Apple TV via my iPad 2 using the Air Video app/server the video plays great however when I pause the video the Apple TV reverts back to the home screen within a few seconds and then when I want to restart watchi

    When I stream videos from my laptop onto my Apple TV via my iPad 2 using the Air Video app/server the video plays great however when I pause the video the Apple TV reverts back to the home screen within a few seconds and then when I want to restart watching the video I have to re-buffer the video. Is there any way I can stop the Apple TV from reverting back to the home screen when I pause the video I’m watching?

    Welcome to the Apple Community.
    Contact the developer of the Air Video app.

  • HT4557 I have iPad 2 and trying to connect to apple tv. Have gone into videos and music and put in my apple id and password but won't work. Pick up my PC fine though

    I have iPad 2 and trying to connect to apple tv. Have gone into videos and music and put in my apple id and password but won't work. Pick up my PC fine though.
    Any ideas? Have tried usual switching on and off again but no change

    Here’s what you need to do to turn on AirPlay Mirroring on your iPad 2:
    – Have iOS 5 installed on your iPad 2
    – Make sure your Apple TV software is up-to-date. You can check for updates on the Apple TV by going to Settings > General > Update Software.
    – Have your TV turned with Apple TV active and showing.
    – Double-tap the home button on the iPad to bring up the Multitasking Bar.
    – Swipe to move to the left of the Multitasking Bar, so you can see the set of controls just to the left of the volume adjustment slider.
    – The button just to the right of the Fast Forward button – the one that has a rectangle with a solid, upward-facing arrow in it – is the AirPlay button. Tap to switch from iPad to Apple TV.
    – Once you do that you’ll see the Mirroring section appear just below the entry for Apple TV. Just tap to turn that On, and the iPad 2 will immediately begin mirroring to your TV screen.

  • I have an iPad 2 and want to use video mirroring. I bought a VGA adapter for the iPad, iPhone and iPod so that I could plug the iPad into any monitor, TV, projecter, etc without it being an HD device. I plug it in and it appears the monitor has no communi

    I have an iPad 2 that I want to use with video mirroring to give lectures with. I bought a VGA Adapter for the iPad, iPhone, and iPod as I want to be able to connect with any TV, monitor or projector for lectures, not just an HD device.. After plugging in my iPad to the VGA adapter and then to the video device, it appears that there is no connection with the iPad. Anybody have any thoughts?
    Thanks, Steve

    This article outlines how to use the Apple AV adapter or VGA Adapter to connect your iPhone 4, iPhone 4S, iPad, or iPod touch (4th generation) to an external TV, projector, or display. http://support.apple.com/kb/HT4108
    This explains how to set up AirPlay Mirroring, and how to troubleshoot AirPlay Mirroring issues that may occur between your iPhone, iPad and Apple TV (2nd generation).  http://support.apple.com/kb/TS4085

  • I updated an iPod touch, an iPad 2, and an iPhone 4 to iOS 6, and all of them now will not connect to WiFi. They all give this wierd 404 error page from Apple and insist that I need to login to the network. Bad job testing the software Apple.

    I updated an iPod touch, an iPad 2, and an iPhone 4 to iOS 6, and all of them now will not connect to WiFi. They all give this wierd 404 error page from Apple and insist that I need to login to the network. What's the fix? None of the recommended fixes work in any of these devices. Reset device, reset network, renew lease, etc. None of them work.

    Does the iPod work OK?
    Does it charge when connect to the computer?
    Does it appear in My Computer?
    Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
    http://support.apple.com/kb/HT1353#iPod_touch_late2009
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • I have an iPad 3 and Apple TV 3rd gen - all software up to date.  I can use airplay but there is no mirroring option available from the iPad 3.  Why?

    I have been able to get Airplay to work with my iPad 3 and 3rd Generation iPad TV, however there is no mirroring option when I hit the airplay icon - hence I can get audio, but no video.
    iPad software:  iOS 5.1.1
    Apple TV software:  5.0.2 (4250)
    Any thoughts as to what's going wrong?

    Are you enabling Airplay mirroring properly?
    Double click the Home button, scroll to the leftmost screen and under Airplay look to turn mirroring On.
    AC

  • Streaming audio from my IPAD to my Apple TV from Rhapsody application.  when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

    I am Streaming audio from my IPAD to my Apple TV from Rhapsody application.  when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.  I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream).  When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD.  All device are on current releases of software.  I have no Video hooked up to the Apple TV.  How do I correct this?

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • Apple tv video quality vs hd tv and high def dvd's

    ok...i know it supports 1080i, but does the video quality of video in itunes really look good compared against say a blu-ray disc, or hdtv signals? i'm sure it will get better (with a hardware or software upgrade?) if its not close to high def quality but want to know what i'm in store for if i buy appletv now...thanks. PS: i currently have directv HD and a ps3 for blu-ray, and my tv's are all HD...

    Based on my own testing, the distinctions between an HD-DVD movie (which are true 1080) and an Apple TV video converted as its own maximum settings (which is 720) is actually quite noticeable if you have a 1080 TV set, but at the same I don't consider it a show-stopper. I watch a lot of HD broadcast content that's only 720p, and it's still very good.
    An HD-DVD or Blu-Ray DVD will normally be in 1920 x 1080 resolution (1080p or 1080i, generally depending on your equipment). The Apple TV's maximum resolution is 1280 x 720 (basically 720p). Therefore, even an original HD-DVD or Blu-Ray DVD converted to Apple TV will need to be scaled down to 720p for display on the Apple TV.
    Further, Elgato EyeTV actually scales these down somewhat lower, so HDTV recorded content could be even worse-off, depending on the original source. The standard Apple TV export settings use a 960 x 540 frame in order to keep the bit-rate and frame rate within tolerances (since a 720p signal is approximately 60fps, and the bitrates will generally exceed 5-6 mbps, which pushes the limits of the Apple TV).
    Even more interestingly, Elgato's new turbo.264 dongle will only encode in "Apple TV" format at a maximum resolution of 800 x 600 (and if you do the math you will realize that this will be considerably less for a 16:9 aspect ratio video).
    The result is that videos converted from an EyeTV Hybrid are technically much worse off on the Apple TV than viewing the original source material. Whether this is significant enough to be noticeable will depend on your output medium, but on my 62" DLP, the difference is quite apparent (although still far superior to an SDTV signal).
    You can get 1280 x 720 content to play back at 60fps at 5mbps bit-rates on the Apple TV by using ffmpeg-based encoders and manually selecting higher settings, although it's been hit-and-miss in my own testing, and of course it creates gargantuan files. Elgato and others have obviously tried to stay with the more conservative settings to ensure that they can guarantee the broadcast possible range of support.
    In fact, although most of the standard encoder settings max out at 2.5-3.0 mbps, I've successfully pushed up to 6 mbps through the Apple TV, although such content has to be synced rather than streamed, since even an 802.11n network has a hard time keeping up (it worked, but there were some drop-outs and glitches in the process). Of course, 6mbps content is going to fill up the Apple TV hard drive pretty quickly as well (you'd only be able to fit around 11 hours on the internal 40GB hard drive).
    The other thing to keep in mind with DVD movies is that they come from film, which is a 24fps source (based on the physical nature of film). As a result, the distinctions between a 720p and 1080i signal are less prevalant when dealing with film content, since you won't get the full 60fps HDTV capabilities anyway. Interlacing can still create some nasty side-effects, but it's far less of an issue when you're dealing with less than half of the normal frames.
    In my own experiences, I have an Apple TV that is connected to a 1080p upscaling DLP TV (native 1080i input, internalized de-interlacing), and a second Apple TV that is connected to a 720p LCD TV. With the first Apple TV, I can notice the difference between 720p and 1080i output settings only when viewing photos, since the remainder of the standard content doesn't exceed 720p anyway. Further, because my TV de-interlaces a 1080i signal to 1080p, I don't get the flicker that is normally associated with a 1080i signal.
    On the second Apple TV, I leave the setting to 720p, since that's the native resolution of the second TV, and I get noticeable interlacing-based flickering on the 1080i, particularly with photo slideshows (mostly in the transitions).

  • After updating to iOS 6 my iPod Touch 4th.Gen is virtually unusable ... does anyone know how to sue Apple since they gave no warning about iOS 6 being for iPad optimisation and a killer  for iPods ?

    After updating to iOS 6 my iPod Touch 4th.Gen is virtually unusable ... does anyone know how to sue Apple since they gave no warning about iOS 6 being for iPad optimisation and a killer for iPods ?  Before I throw away my iPod Touch does anyone know if Apple intends to rectify their obnoxious disregard for iPod users by issuing another 'upgrade' which will allow iPods to work without the constant system crashes that iOS 6 has caused ?

    Contact a lawyer if you want to sue.
    Otherwise try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Can you transfer hd video directly from an ipod and then EDIT that video in imovie? I will be on the road and wont have a mac, just an ipad 2 and ipod touch. I want to shoot video on the touch and edit it on the ipad. Thanks!

    Can you transfer hd video directly from an ipod touch to the ipad 2 and then EDIT that video in imovie? I will be on the road and wont have a mac, just an ipad 2 and ipod touch. I want to shoot video on the touch and edit it on the ipad. Thanks!

    Thanks Tgara.
    Its funny. So far the responses have been 50/50 on this question. I even asked two seperate Apple Store employees here in NYC, and got two different answers! One said yes, the other no.
    Argh!
    I know from watching the keynote speech about icloud and iOS 5 that you will be able to cut the cord between the pc and ios devices like the ipad. No more need to sync them via a cord. So will that mean i would then be able to load video directly to the ipad via tha cam kit connector from my ipod? Also i wonder if/when Apple will allow HD video from on Apple devices like a canon dslr to be able to transfer to the ipad via the cam kit connector AND be able to EDIT that footage in imovie for the ipad. Speaking of imovie for the ipad...i hope it gets an update soon as well.
    Anyway....with the macbook airs getting updated next week with thunderbolt and new sandy bridge chips....i may just get one of them instead of the ipad 2 for editing video on the road. Still...i prefer surfing the web experience on the ipad. Grrrrrrr. **** youuuuuuu Apple!!! Lol

  • Camera Connection Kit Ipad 2 and Sony Video Camera

    I have got the camera  connection kit and I want to beable to put my sony video on my ipad but when i plug in the sd card to the ipad the video do not show up.  I also have converted the video to the MPEG-4.  Any kind of help would be greatly appreciation.

    Only for iPad 1, iPad 2 and iPad 3
    http://store.apple.com/sg/product/MC531ZM/A/apple-ipad-camera-connection-kit

  • Hi, i have downloaded peppa pig series using itunes, and have tried to sync them to my Ipad Mini and IPhone 5, however it is not working it states "videos from your Itunes libary can not be copied to 'ipad' because they can not be played on this Ipad.

    I have downloaded Peppa Pig series using Itunes and have tried to sync the tv programme to both my Ipad Mini and IPhone 5.  However neither work saying that 'videos from Itunes Libary can not be copied to 'ipad' because they can not be played on this I Pad.  I have downloaded the HD episodes is this my problem or do i need to download a 'video watching' app?  Please help we are going away next week and the episodes were to help keep my toodler occupied on the plane.  thank you

    The error you received kinda looks like the one in this article: http://support.apple.com/kb/ts4223
    But the iPhone 5 and the iPad mini should support HD videos. 
    What I would try is downloading the movies directly to your iPad mini or your iPhone.  You will want to do this when connected to Wi-Fi, but you can follow these steps in this article: http://support.apple.com/kb/HT2519
    I hope that helps!

  • I have a first gen iPad, 64g, and for no apparent reason, the screen goes black and whatever app I am using is closed on me. It seems to be happening more and more frequently, especially when loading a blog, or trying to watch a YouTube video. I try to o

    I have a  iPad, 32g, and for no apparent reason, the screen goes black and whatever app I am using is closed on me. It seems to be happening more and more frequently, especially when loading apps, or trying to watch a YouTube video. I try to open safari or youtube again and it will often crash several times before it may or may not decide to load for me. It is extremely annoying and getting to the point where I can not use it

    Standard troubleshooting steps in order are as follows:
    Power the iPad off and on.
    An iPad reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
    Restore your iPad with iTunes from your iPad's backup.
    Restore your iPad with iTunes as a new iPad or not from your iPad's backup.
    If no change after the last step, your iPad has a hardware problem.

  • Desktop Viewer and iPad Adobe Viewer conflict on video previews

    Steps:
    Place .mov file in InDesign layout. Ignore the warnings about .mov file not for SWF output, only PDF. Be sad there is no poster.
    Place .f4v file on same page in InDesign. Be happy that there are no warnings. Be happy there is a poster.
    Use desktop Content viewer to preview the page. The .f4v file plays as desired. Image moves with controller. The .mov file controller moves but there is only a black screen, no image.
    Use Adobe Viewer on iPad to preview the page. The .f4v file is a static picture with no video controls or images. The .mov file plays but there was no poster.
    I was told that the desktob Content viewer is only for the most "raw" previews of the Overlay effects, but it seems that this is not quite correct. If you go by what the Content viewer shows you would not place the .mov file.
    But if you place what does preview in the Content viewer, the .f4v file doesn't play on the iPad.
    Based on what the desktop Content viewer displayed, I thought the only format that would work on the iPad would be the .f4v. But given the love between Apple and Adobe regarding Flash that didn't seem to be possible.
    I've had someone else confirm these findings.
    Any thoughts?

    Sandee,
    You're best sticking with .mp4 files, at least for now.
    http://help.adobe.com/en_US/digitalpubsuite/using/WS9293e1fb3b977c5c73657495129f66e490f-7f fb.html
    "Supported video and audio files you place in InDesign play when tapped in the Viewer. For video files, use a format that is compatible with Apple iTunes, such as an MP4 file with h.264 encoding. For audio files, use MP3 files."
    http://indesignsecrets.com/picking-the-best-video-format-for-digital-publishing.php
    "What is the best video format to use for most digital publishing output? Surprisingly, there is usually one answer—H.264 files. H.264 files are the most widely supported: Adobe InDesign CS 5 and 5.5 let you place them, and you can control their viewing with the Media panel. They are supported in Adobe Flash Player, and they are embedded into Acrobat 9 and X, and Reader 9 and X. Apple has supported the format on its very popular devices (iPad, iPhone and iPod Touch), and it’s equally viewable on Macintosh or Windows computers. When you view videos on YouTube, Vimeo, or other sources on the internet, you’re viewing H.264."
    Andrew

  • I have updated my iPad mini and now when I watch videos or photos I have  taken I cannot zoom or pan around. Please help

    I have updated my iPad mini and now when I view videos I cannot zoom or pan around like before

    Quit the mail app and reset your iPad like this:
    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • I have a new IPad, IPhone5 and Apple TV. Neither the iPhone5 or the iPad have the link in Safari to stream to my TV. The options are there for Pictures and Music. Why not?

    I have a new iPad, iPhone5 and Apple TV. The instructions say that you can stream to your Apple TV from Music, Video or Safari App. The option button exists in Music and Video but not in Safari for either my IPhone or iPad. Why???

    You cannot stream safari to your Apple TV. The music and photo streaming is if you would like to only share photos with your family then you can share specific photos but not your iPhone screen. The same with music you may want to share the music but not mirror your iPhone screen consitantly. To show safari on your apple tv you will have to mirror your device (show everything your doing on your device on your tv). This is done by double pressing the home button and swiping from left to right. It will bring up some controls and their airplay icon. Click this button and choose your Apple TV from the list. Make sure mirroring is ON.
    <Edited by Host>

Maybe you are looking for

  • Recent project won't list my most recent

    When I close FCP and reopen it the most recent project won't open. I just reinstalled FCP 6. Also the window arrangement defaults to the basic setting each time I close.

  • MSVCR80.dll crashes dreamweaver - help!

    this is the error I started getting today. I restarted the computer, ran all of my virus programs and everything to make sure it was not a virus, they found nothing. It happens as soon as I try to do anything in DW, it will load the program, but then

  • Oracle 10g increase disk space

    Hi all, I am very new with oracle and can not find an answer to this question: Is it possible to increase the disk space after installation, e.g. by configuring of an additional disk? (If yes, in what way) The scenario is: After some time after our O

  • Chart into Loop?

    I have a problem that I cannot solve for two weeks ago. If I make a graph with alternative text, shows me the information well, but if I put the graph inside the loop does not show me information, is as if the graph could not interpret the informatio

  • Time capsule not found by airport but ethernet cable was working

    So I turned time machine off some time ago,( got fed up with it constantly saving whilst recording music and slowing down stuff), now although i was happy (ish) as it was before, i can no longer find in preferences a drive to use as backup. the alert