Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

I am Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode. I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream). When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD. All device are on current releases of software. I have no Video hooked up to the Apple TV. How do I correct this?

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Similar Messages

My ipod toch 2g 3.1.3 is stuck on apple logo withe the shutdown ring after that i restore to the original settings and its not tern on plese if somone can halp my plzzzzzz

my ipod toch 2g 3.1.3 is stuck on apple logo withe the shutdown ring after that i restore to the original settings and its not tern on plese if somone can halp my plzzzzzz

Did you already try to connect in recovery mode iPhone and iPod touch: Unable to restore or DFU mode Apple - Support - Discussions - DFU/Recovery mode

Even when I turn down the volume in a clip to zero in imovie '11, but it still plays the audio! I can't get it to stop playing the audio. Any help?

this problem with audio began yesterday but before that it was fine! this is a brand new macbook pro...not even a week old!

Does it work with headphones plugged in? That is typically the culprit, the device mistakenly believes that a pair of headphones are plugged in.

Quicktime 10 won't play the audio on my .3G2 files??

How can I alter the set up for Quicktime 10 so that it will play the audio for all of my .3G2 files?

Is there no way to update a codec or something on QT X? Kinda silly to have 2 different versions of the same program to play different video...
All of the standard audio components should already be installed. The question is whether or not they can be accessed under the 32-bit QT operating structure and which specific audio codec is having a problem.

My macbook boots up and only stays on for 30sec and goes into sleep mode

My macbook boots up and only stays on for 30sec and goes into sleep mode! Any suggestions as to why this might be happening? Thanks....

I assume you have checked your sleep settings in System Preferences>Energy saver
I also assume this has just happened recently and spontaneously, not after installing any particular hardware or software or you would probably have mentioned it...if anything new has been added recently, obviously just remove it!
It could be the battery - have your tried it just on mains? If it's a pre unibody MacBook try it without the battery at all. This could happen if you have a non-Apple (cheap Chinese) replacement battery.
Try NVRAM, PRAM & SMC resets (Google if you don't know how)
Try booting from the install media and repairing or reinstalling OS X. (Back up first!)
Just out of interest if you boot from a DVD or go into Open Firmware or Boot Select modes, does it still sleep after 30 seconds or is it just in OS X?

Time Machine crashes whenever the computer goes to sleep or into screen saver mode.

Apologies if there is an obvious answer or post about this. Every time I try to initialize Time Machine, it will begin backing up until the computer goes to sleep or the screen saver kicks in. When I wake the computer up, I get a message that says "The backup was not performed because an error occurred while copying files to the backup disk." The message also tells me that the problem might be temporary and to try Disk Utility to repair the backup disk if the problem persists.
When I run Disk Utility, I am told that the volume cannot be repaired and that it needs to be reformatted. I reformat the disk, try to run Time Machine again, and get the same problem whenever the computer goes to sleep or into screen saver mode. Lather, rinse, repeat.
I managed to get an initial backup only if I turned off the screen saver and the sleep function. However, once I turned them back on, I ran into the same problem when Time Machine tried to update the backup.
I am running OS X v.10.6.8 on an iMac5,1. The backup is a Toshiba 1TB USB external HD. I saw this same problem posted in the Lion forum (and I cribbed the title of this post from there). Nobody has offered a solution yet, but it was a very recent post.
Thanks in advance.

Oh yeah I forgot to say I use an ETHERNET connection.

If I remove all photos from my iPad, does it remove them from the photo stream also?

If I remove all photos from my iPad, does it remove them from the photo stream also?

I don't think so, I think it stores them on the cloud. I just did a test on my own iPad and although I deleted the source image in the Photos app the image remains in the Photo Stream

HT204370 If I buy a movie from apple tv, can I also see it from my iPad? Or if I buy it from my iPad, can I see it (or download it) on apple tv?

If I buy a movie from apple tv, can I also see it from my iPad? Or if I buy it from my iPad, can I see it (or download it) on apple tv?

Welcome to the Apple Community.
To the best of my knowledge you cannot currently buy movies via the Apple TV 2. You certainly can't here in the UK, where rental is the only option for all available content.
It's my understanding that US customers can purchase TV shows, but I don't believe they can currently purchase movies

Can I stream videos using airplay to appletv2 and play the audio thru stereo using airport express?

I have apple tv 2 connected to my HDTV. I am streaming VEVO videos from iphone to ATV2. Would like to play the audio through my sony stereo. Would love to do it wirelessly if possible. Can this be done? Would airport express connected to stereo make this possible? If not what are my options.

The only input ports I have on the stereo is a dmport, auxillary and headphone jacks. I really would like to do this wireless. If, instead of appletv2, I had google tv which VEVO uses could the airport express be used? Seems like I recall reading somewhere that using 2 of them created a wireless connection for audio. Is that right?
Thanks for any advice.

My macbook is two and half year old, going to sleep mode randomly

Having used this Macbook for almost two and half years, my machine has suddenly generated the problem of going to random sleep. It started as an infrequent thing, then it started happening on a regular basis, to the point that it became almost impossible to work with it. When the computer goes to sleep mode, it doesn't wake up with any key, it has to be woken up by pressing the power button lightly.
Here are the steps I took:
1. The normal thing I did was search Apple Forum and then reset SMC, PRam, then changed energy saving options, everything. Nothing worked.
2. Ran the hardware test and no problems found.
3. Ran the Macbook with all options: with just the battery, without the Magsafe connected, with Battery and Magsafe connected together, with battery removed and the computer running on Magsafe only. Random Sleep continues
4. Thought must be a connection issue and ran to Apple Store in Kolkata, India, thinking that it could be a connection issue with the sleep-mode cable. Apple Store kept the Macbook for seven days, saying that they needed to check the machine, returned it on the seventh day saying that the machine was fine and charged me Indian Rupee 1,500/- (about $ 34). I came back home and the problem persists.
(Here I would like to add that Apple Service in Kolkata *****, probably ***** all over India, simply because Apple is not a major player in this country. The service engineer at Apple Store was at a loss with my problem and after seven days could only say, "We have done our internal tests and found no problem with your Macbook." When I asked about the Sleep Mode sensor connection, he said, "That is working fine, we have checked that.")
5. After coming back home, I faced the same problem, this time with lesser time gap. It would go off to sleep every one minute or so. I decided to set my computer on "never to sleep mode" in the enery saving option. Alas, that didn't help either.
6. I redid the hardware check, only to find that my computer hasn't detected any hardware problem.
7. Now, as a previous Windows user, I thought that the problem must have been with the OS. So, at the risk of losing all my files, I decided to reload the OS. (My original OS DVD was Leopard, but it was later upgraded to Snow Leopard by the vendor free of cost). I took backup in Time Machine, and backed up the documents in another Disk and reloaded the OS. All seemed fine so far, for about 10 minutes. I was now confident that finally I could solve the problem and was then planning to migrate my previous files to my newly loaded OS-X. Alas, I was wrong. Before I could connect the external HDD to my computer, my Macbook went back to its previous trick of falling asleep.
I'll definitely take back my Macbook to Apple Care tomorrow, but with my experience here in Kolkata, don't know whether they would be able to solve anything. Last time I had to show them the posts in Apple Forum to prove that Random Sleep is a problem that happens to Macbook.
PS: My Macbook is with aluminium body bought in January 2009. Out of warranty. My optical drive conked off long ago (after about 15 months or so after I bought the Macbook) and I live with an external drive.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

TS3274 its almost 10 months,i purchased ipad2 32 3g wifi.itinially i got problem with applications shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs freq

its almost 10 months,i purchased ipad2 32 3G wifi.itinially i got problem with applications and safari shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs frequently.plz advise.

If you have followed the standard Apple troubleshooting processes (see user guide )
probably a trip to the local Apple Store Genius bar is called for before warranty runs out
Assuming the iPad has been released in your Country if not you may have to take it to a
neighbouring Country where it is available
This page will tell you ,via the drop down menu Countries that can support iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=ipa d

My iPhone 3gs is shutting down and going into un-recovery mode?? : (

Hi, its my first time on here, due to the fact that I have never ever had any problems with my iPhone 3gs.
Until 3 weeks ago.
It all started when my e-mail decided that it was going to be difficult. so I go to restart my iPhone and my screen lock/ power button does not respond at all. then the trouble ensues.. two days later, (after I ran the battery to nadda so it would turn off) and was fully charged, my phone cut out while I was sending a text. I was connected to wifi. the cell service bars were gone, and 3-5 seconds later my wifi disappeared also. at this point I was thinking dude? and the touch screen was still functioning. so I checked the network settings and my screen became unresponsive. my phone then went instantly to a black but still lit screen and then was off. my lock button still would not work so it wouldn't turn on with that, so I hit the home button and it showed a screen with a iTunes symbol and a USB cord, and a slide for emergency call bar. also there was a little quetion mark circle thing so I tapped it and a screen with two four letter acronyms and a number set for each showed up. long story shortened, I call apple and am on the phone with them for 5-6 hours over the next two weeks. they were of absolutely no use, and proceeded to lay into me about how I am using too much data.. and that my phone is probably not going to be fixable.
I get it to work by popping my sim card and restoring it then puting it back in and factory reset it with the sim card in it.
I get it working again and it is fine until last night. same exact thing.
what can I do?? im lost.
Information that might help..
my phone has had around 200+(10-30) gigs run through cellular data (3G)
about 450 gigs total including wifi. X (
has never been jailbroken, dropped, opened, water damage etc..
current i tunes/iphone updates.
windows 7
iTunes 64 bit
AT&T
will post more info if you want to help ..
THANK YOU!!!

If I was in your shoes, I would choose to restore the iPhone with iTunes and then choose to NOT restore a previous backup. I'd then go on to set up the phone as though it were totally new, and choose the stuff to load onto it.
The reason I'd go through that trouble.. even though it meant losing a lot of settings and having to set stuff up again .. is because I wasn't sure I could trust the backup that it's restoring from.
If you have trouble again after doing the fresh reload -- especially if it's soon after you do it -- you may have a hardware issue with the phone, such as faulty flash memory or a processor chip that's failing. If that's the case, you'll want to consider your repair/replacement options at that point.

When I send an iMessage from my iPad it shows it came from my wife. Is there a way to fix this?

When I send an iMessage from my iPad it shows it came from my wife. Is there a way to fix this?

Are you using her Apple ID and email on your iPad? The Message app uses your Apple ID as the contact at which you can be reached.

24" iMac summer 2008. CPU fan runs at highest speed, some times goes to "sleep" mode. t' is about 35'- 42'C. Run hardware test: 4sns/1/40000000:tlop-130.000, next time 4sns/1/40000000:tlop-128.000 errors. Reinstalled all softwere. Nothing changed.

24" iMac summer 2008. CPU fan runs at highest speed, some times goes to "sleep" mode. CPU t' is about 35'- 42'C. Run hardware test: 4sns/1/40000000:tlop-130.000, next time 4sns/1/40000000:tlop-128.000 errors. Tried SMC, NVRAM, PRAM. Reinstalled all softwere. Nothing changed.

I suspect you have hardware problem with a fan sensor. Doing a software install will not help the machine needs to be taken in for service. If you run Apple Hardware Test in Extended Mode it should reveal the error code. If it does not then run AHT an additional 2-3 times to be sure in Extended Mode. Each pass will take about 30-60 minutes.

MacBook starts and instantly enters sleep mode

In the past few days I've been experiencing a reoccurring problem with my macbook pro. I press the power button, hear the startup of the drive, and then sometimes the display will turn on for a second(mostly stays off), and then enters sleep mode instantly. I can not get on my macbook unless I turn it on and let it sit for 15-20 minutes, then MAYBE the display will activate. Please help.

Do you hear a chime at startup? How do you know it is entering sleep mode and not turning off? Does the cursor move on the screen? Here is something from another user's experience:
I had the same issue with my 2008 iMac and Apple support walked me through the fix yesterday...
1. Shut the computer down by holding the power button for 10 seconds
2. Restart the computer and press shift at the same time until you see the progress bar start moving
3. Once you reach the point where your screen goes dark and you see the cursor, type the first letter of the username for your computer, then hit Enter, then type your password, then hit Enter.
4. After a moment, you should see the spinning beach ball
5. Your screen should then move on to something along the lines of "Completing OSX Installation" (I can't remember the exact wording). Let it finish. After that it should go to your normal desktop and the issue should be fixed. (If your screen goes pitch black during this process, hit the space bar. I thought it wasn't working, but the screen was just sleeping).
Apparently it's an issue with an automatic update that never quite got past the login screen.
MacBook Pro (15-inch, Mid 2010)- Intermittent black screen or loss of video

Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

Similar Messages

Maybe you are looking for