IPad - Error message for backing up

This morning I tried to synch my iPad and got an error message "iTunes could not back up the iPad 'Name of iPad' because session could not be started with the iPad".
I also saw right after that there is a software update - but don't know if this had an impact or not. I have restarted my Mac, checked that I ahve the latest software for it, and for iTunes. I also did a re-set on my iPad.
I'm still getting the message - or else it won't start synching at all.
Any ideas?

Tried it one more time, and everything took. Go figure.

Similar Messages

Custom error message for Back Button Error

I am using JDeveloper 9. I have tried to create a custom error message to handle a "Back button" press.
But the error message is usually ignored and the system's regular "Stale data" message appears. Is there a way to prevent the system's message from appearing and to raise a custom error message?

Do the following coding in your processRequest() of the Create or udpate page.
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
// If isBackNavigationFired = false, we're here after a valid navigation
// (the user selected the Create button) and we should proceed
// normally and initialize a new employee.
if (!pageContext.isBackNavigationFired(false))
// We indicate that we are starting the create transaction (this
// is used to ensure correct Back button behavior). Note that you
// can assign whatever name you want to your transaction unit.
TransactionUnitHelper.startTransactionUnit(pageContext, "empCreateTxn");
// This test ensures that we don't try to create a new employee if
// we had a JVM failover, or if a recycled application module
// is activated after passivation. If these things happen, BC4J will
// be able to find the row that you created so the user can resume
// work.
if (!pageContext.isFormSubmission())
OAApplicationModule am = pageContext.getApplicationModule(webBean);
// Call your method to handle creating the new row.
am.invokeMethod("createEmployee", null);
else
if (!TransactionUnitHelper.isTransactionUnitInProgress(pageContext, "empCreateTxn", true))
// Get the purchase order number from the request.
String orderNumber = pageContext.getParameter("headerId");
MessageToken[] tokens = { new MessageToken("PO_NUMBER", orderNumber)};
OAException message = new OAException("ICX", "FWK_TBX_T_PO_UPDATE_CONFIRM", tokens,
OAException.CONFIRMATION, null);
// We got here through some use of the browser "Back" button, so we
// want to display a state loss error and disallow access to the page.
// If this were a real application, we would probably display a more
// context-specific message telling the user they can't use the browser
// "Back" button on the "Create" page. Instead, we wanted to illustrate
// how to display the Applications standard NAVIGATION_ERROR message.
OADialogPage dialogPage = new OADialogPage(message);
pageContext.redirectToDialogPage(dialogPage);
} // end processRequest()
--Prasanna

Error message for Confirmation

Hi,
We have a error message for back end service entry creation in the Application monitor for Confirmations.
There is no outbound or Inbound Idoc found with error.
From this error message how can we found the PO Number or Confirmation number to check whether the confirmation is posted or not?
Thannks
Jimmi

Hi,
If you are doing confirmation in SRM , it is Extended classic scenario.
error : There is no outbound or Inbound Idoc found with error
You have not created the IDoc for the outbound Idoc for the confirmation to take to the backend.
Create the Message type and partner profile in WE20
Create Distribution model in SRM -T.code :BD 64
we found the PO Number or Confirmation number to check whether the confirmation is posted or not
Soln: Check in confirmation in display/process confirmation in SRM enter the timeframe
(or) check in R/3 in ME23N by putting the Purchase order no and check the goods receipt
Regards
Ganesh Kumar.G.

While syncing iPad with my computer, i get an error message: cannot back-up to this computer

while syncing iPad with my computer, i get an error message: cannot back-up to this computer. I'd like to know why? Is it safe to download IOS6 if the ipad is not backed up?

This is the same computer that I originally synced with the iPad and the first backup worked. Is there any way too solve this problem so I can upgrade to iOS 6

[svn:bz-trunk] 15217: Bug: BLZ-508 - If server receives message for an unknown destination it shouldn ' t include the destination name in the error message sent back to the client .

Revision: 15217
Revision: 15217
Author:   [email protected]
Date:     2010-04-05 03:43:36 -0700 (Mon, 05 Apr 2010)
Log Message:
Bug: BLZ-508 - If server receives message for an unknown destination it shouldn't include the destination name in the error message sent back to the client.
QA: Yes
Doc: No
Checkintests: Pass
Details: Changed the error message to not include destination id. I'm also checking in a few minor fixes I had locally.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-508
Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/errors.properties
    blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.java
    blazeds/trunk/modules/core/src/flex/messaging/cluster/JGroupsCluster.java

Thanx Mete, yeah i did...
but i solved it some other way... not entirely sure this was
it though as i was doing a lot of things at once...
it was fds.swc... possibly it was out of date or missing.

Installing the latest update on my iPad - error message saying the iPad couldn't synchronize because of an internal error, and then - error message (OxE8004017) when trying to save, and then (2003) when trying to restore - nothing works anymore

Installing the latest update on my iPad - error message saying the iPad couldn't synchronize because of an internal error, and then - error message (OxE8004017) when trying to save, and then (2003) when trying to restore - nothing works anymore - On my iPad the only thing I see is a connector cord to iTunes and nothing else.
What can I do ???

Same issue for me, recently I started having issues with apps no longer being able to access my Facebook account. But the iPad Facebook account settings will not accept my password, even though the Facebook app and Safari can access my account fine. The only significant events I recall that have occurred that may have triggered this have been that via my Facebook account I killed off a lot of so called authorised connections and I changed my user name, but still have the same email address and password.
I have tried just about every solution put forward on the net, short of a factory restore, back to new, on my iPad.
I have also; deleted my iCloud account, deleted the Facebook app and account, deleted Safari data.
One would think that after I have deleted my account from the iPad that it would ask for both username/email address and password, but it only asks for password, so the username is still stored somewhere that I am unable to delete.
I also see that no one seems to have been able to get an answer from Apple. So I'm guessing they have absolutely no idea themselves.
I am hesitant to put my username on Facebook back to what it was as Facebook only give you a few chances to change your username, then you are locked.
I have iOS 7.1.1 installed.
I did have a lot of respect for Apple and their devices as they just worked, but they are becoming tarnished by ignoring what seems to be a growing issue.

Cannot re-download purchased magazines to my new iPad, error messages 4032, etc...

I religiously back upped my iPad 2 to iTunes prior to selling it and purchasing the new iPad (3). When activating iPad I restored my backup from iTunes. Of the many managzines I regularly purchase through Newstand and separately on the iPad, certain magazines were able to re-download purchased content, while others either were not able to even though they show as having been purchased, and some were not shown as having been purchased altogether.
Examples error messages for Newstand magazines showing up in my library that I attempt but are unable to re-download are:
Car and Driver Magazine: Issue Feb 2012
Automobile Magazine: Issue December 2011
House & Home Magazine: Issues Nov. 2011, Jan. 2012, Feb. 2012, March 2012, April 2012
All these magazines return this error message when attempting to redownload - "An error occurred. Uable to retreive issue information (4032)."
Esquire Magazine: Issues Oct. 2010, Nov. 2010, Dec. 2010, Jan. 2011, Feb. 2011, March 2011, April 2011
This magazine returns the error message: "Download in progress Another issue is being processed, please wait until all items are installed to download a new issue."
Newsweek Magazine: Issues May 17 2010, June 14 2010, June 28 2010 & July 5 2010, Nov. 27 2010, Oct. 11 2010, Oct. 18 2010, Oct. 10 2011
This magazine returns the error message: "Cannot Install Item Please restart the app and download your purchase again."
Example of purchased magazines outside of Newstand showing as purchased that cannot be re-downloaded are:
Time Magazine: Oct. 17, 2011 (many other issues purchased not even showing up as having been purchased)
Example of purchased magazines outside of Newstand not showing as having been purchased:
Fortune Magazine: Aug. 15 2010

YAY!!!
I contacted the magazine direct (SFI) and they gave me instruction on how to get my magazines back. I'll try to explain as well as I can.
1. Deleat the magazine app from your ipad.
2. Re-download the app to your ipad.
3. DO NOT go into subscriptions and try to download or "Transfer" your subscriptions!!!!!
4. Go into the buy section.
5. You will need to re-download every magazine again.
6. Don't be concerned about it showing a price, as when you click on it, it says you have already purchased this and do you want to down-load again? Click yes.
7. Your magazine should start to down-load again.
I know this is not the best way to get your mags back as it takes a lot of time and download megs, but it was the only way I found that worked.
Hope it works for you too

Error Message For BISystemUser: User not authenticated

We have migrated from DEV to PROD env.(11.1.1.1 -> 11.1.1.3). Along problems with bipublisher - there are some strange thingths: we successfully loging using weblogic account into AdminConsole и Enterprise Manager, but in Answers we get an error: invalid username or password.
nqserver.log:
...[ERROR:1] [] [] ... [tid: 1090] Error Message For BISystemUser: User not authenticated.
...[ERROR:1] [] [] ... [tid: 1090] [nQSError: 43126] Authentication failed: invalid user/password.
In oracle support we found such issue (Doc ID 1308389.1):
OBIEE 11g Error: "Unable to Sign in. invalid username or password was entered" After Changing Repository, Deleting BISystem User, Adding it Back (Doc ID 1308389.1)
Applies to: Business Intelligence Server Enterprise Edition - Version: 11.1.1.3.0 [1905] to 11.1.1.5.0 [1308] - Release: 11g to 11g
Symptoms: In OBIEE 11.1.1.3.0 using default authenticator, it is not possible to log in to OBIEE after changing repository. To troubleshoot, BIsystemuser was removed from global roles and added back again.
Getting error: Unable to Sign in. invalid username or password was entered
Changes: Changed repository, deleted BISystemuser, added the user back
Cause: Several changes e.g changing rpd, deleting bisystem user, adding the user back etc. occurred in the environment and caused log in to OBIEE to stop working
Solution: After a lot of troubleshooting e.g re-starting system in the correct order, refreshing GUIDs, re-start OBIEE with default SampleAppLite.rpd and web catalog, the error persists. The system was uninstalled and re-installed to avoid further corruption and configuration problems in the new installation. This resolved the problem
Does we have to 'reinstall or make a lot of troubleshooting e.g re-starting system ' to solve this error?
It seem to be funny for PROD environment. How we cam resolve this problem?

Are you saying you upgraded both dev and prod from 11.1.1.1 to 11.1.1.3 or that you migrated a dev 11.1.1.1 to a prod 11.1.1.3? What did you migrate?
At a rough guess the BISystemUser password is different in dev and prod (created by system on install) and in your 'migration' you've moved the dev credential across to prod.
If that's the case you need to change the bisystemuser password to something known and update the credential store password.
Another possibility might just be that you need to regenerate the GUIDs:
http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10543/privileges.htm#BIESC721

Itunessetup.exe couldn't be downloaded error message for for vista.

itunessetup.exe couldn't be downloaded error message for for vista. Couldn't get the update so I uninstalled itunes and still get the error message. I tried reconfiguring the start up components with no luck. anybody know how to fix this?

I actually had started on this before your post but you are right. My luck created some issues but after I got around that it worked. I uninstalled everything in the order it needed to. While I was doing this windows had an update. When I restarted something must have went wrong with the update and it crashed on the start up. took me a while to restore it but when I was done it brought back the programs in their damaged state.
So I did the uninstall process again. restarted. and reinstalled and it all works now.
Thank you for the help.
For those reading this the order to uninstall goes as:
iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, Apple Application Support, iCloud, and finally MobileMe. Skip over any you don't have installed. Then Restart then reinstall itunes.

Customised Error Message for ESS-MSS Applications

Hello All,
Currently, if there are any errors in the ESS/MSS transactions, we get the 503 error with lot of irrelevant data to the users. We have a basic html page which says, "There is a issue-Please contact XXXX".
Is there a way to replace the standard error message with this html page ?
PS: I am not talkign about the "Dispatcher Running" or "Application Stopped" messages, Please do not point me again to SAP Help website which doesn't answer my query. THIS IS ABOUT REPLACING THE STANDARD ERROR MESSAGES FOR ESS/MSS APPLICATIONS.
Any help is much appreciated.
We are on EP 7.01 SP3 (ESS 1.41)
-Raj

Hi Raj
Let me clarify the difference between ESS and MSS errors and JAVA stack errors
A "503 Service not available" is not an ESS or MSS error - this is the thrown by the stack (possibly while navigating
in ESS or MSS)
The only information I have available in the case of java stack errors is to follow
http://help.sap.com/saphelp_nw70/helpdata/en/9a/e74d426332bd30e10000000a155106/frameset.htm
Whcih indicates how to customize stack errors like 404 or 500
Lastly you can also decide to hide the stack trace as per KBA 1596212
To modify an ESS or MSS message this may require modification to front and back-end HCM application - usually
ESS gets error information based on back-end errors example "fill in all required fields"
Hope this helps

I get an error message for publication type

I am using itunes producer to load a book. An error message for "publication type" appears when I get to deliver content area. I am unable to fill in that category box when I go back to that particular screen. The drop down box there shows a check mark that will disappears immediately when clicked on. I know that "digital only" or "new release" needs to be put into that box, but am unable to get any other choices for the box and can not download the book due to error message. I did enter a price in the pricing box.
Thanks for any assistance,
Don

I'm having the same problem. Have you found the answer?

Error message when backing up with Deja Vu

Hi,
I am getting this error message when backing up with Deja Vu
symlink(/,/Volumes/Backup HD/Volumes/Server HD) failed at /usr/local/bin/psync line 240.
symlink(/var/clamav/.spamassassin,/Volumes/Backup HD/private/var/amavis/.spamassassin) failed at /usr/local/bin/psync line 240.
Below is the line 240 of /usr/local/bin/psync
symlink($slink, $dpath) or warn "symlink($slink,$dpath) failed"; ###js added $opt_a and warning
Anyone has an idea?
Cheers
Ben

The mail system can be backed up with mailbfr and the resulting backup subsequently with any decent backup software. mailbfr will make sure the mail system is stopped while backing up.
A server is always tricky to backup, because it is always in a "fluctuating" state. Ideally all services should be stopped before a backup. Some will not cause major issues, others like mail will. Unless you have some sort of raid setup, where you can take a disk offline for backup purposes, you will always have to be very careful.
I would look for service specific scripts on an as needed basis. There are some around for SQL for example.

How to create a error message for Deleted batch while creating a PO

Hi ,
Can any body tell me how to create error message for a deleted batch while creating a PO in ME21n,
when a PO is created for a deleted batch at GI &GR lebel it is showing a error message,
but i want to show a error message while doing the PO creation.
Thanks,
Sachhi

in badi me_process_po_cust u can put this message
METHOD if_ex_me_process_po_cust~check.

HT4847 I can not delete old icloud back up from my old phone, keep receiving an error message "this back up can not be deleted because it's in use" it is not in use that phone is long gone!

I can not delete old icloud back up from my old phone, keep receiving an error message "this back up can not be deleted because it's in use" it is not in use that phone is long gone!

I have the same problem here and it wont let me do another back up or delete the old one.... Please help!!!! Anyone

For weeks I have been viewing a doggy day care via their web cam. This weekend I upgraded to Lion and have been unable to view the center since. I get an error message for java webcam class not found. All of my software is up to date--suggestions?

For weeks I have been viewing a doggy day care center via their web cam. This weekend I upgraded to Lion and have been unable to view the center. I get an error message for Java plug-in 1.6.0_29 ....webcam class not found. Any suggestions on how to fix this?

Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
Regards.

IPad - Error message for backing up

Similar Messages

Maybe you are looking for