IPad frozen after trying to install iso 7

I just downloaded iso 7 on my iPad. I can enter my password, but it still says it's "joining network"...about 15 hours?! I can't cancel, I did get a pop up twice saying it wasn't complete, continue, so I clicked continue. But it's frozen on Joining network.
Any ideas? I can't go back to look, but I think it was the iso 7.0.2
Thanks!

Please see: http://support.apple.com/kb/HT1808 for assistance.
Regards,
Steve

Similar Messages

Touch is frozen after trying to install 2.0 update

I just unpacked my refurbished 16gb ipod touch, installed the latest version of itunes and even was able to throw a few songs on it. Trouble stuck when I tried dloading (purchased and paid for!) the 2.0 update so I could install the free games and aps etc. It took me to a screen where it said it would download and sync which could take up to 30 minutes. Only took about 8. I think it was 2 hundred something MB. So the progress bar looks like it is working, then I get an error message 5 min later with a number, 1602 I think it was. I'm not sure because I am unable to get to that point again. After that it says I should restore to factory settings, I will lose all my songs and installed aps blah blah, so I say yes do it cus this thing is f'ed. Then the progress bar comes up again and a different error message to follow (1604?). Now it is in this frozen state with a picture of the usb cord being plugged into the itunes icon ??? Has anyone else experienced this or had a similar problem? I called the customer support after hours (will call them tomorrow) and was chatting with this robot and there wasn't even an option for what I am describing in his list of 'frozen images' schpeal. There was the 'frozen apple' image, 'syncing to ipod' image and others but this sounds like a new one. HELP!
Thanx

it's just happened to me today too when i tried to install the 2.0 update
and it happens everytime i try to update my ipod touch

Ipad will not turn on after trying to install ios 6.1

after trying to install ios 6.1 my ipad seems dead, the apple comes on and off, and the battery shows no life, after it has been plugged in for hours.

See Here > http://support.apple.com/kb/ht4097
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

IPad Frozen after 3.2 update

Help, my ipad froze after attempting to install the update today. I tried putting it into DFU mode and now it won't even turn on. I received an itunes 1602 error. Anybody else experience this?
Jay

Winnersall wrote:
Help, my ipad froze after attempting to install the update today. I tried putting it into DFU mode and now it won't even turn on. I received an itunes 1602 error. Anybody else experience this?
Jay
If you search 1602 in these discussions, you'll get some answers.

Itunes wont open after trying to install 11.1.4??

iTunes will not open after trying to install 11.1.4 version ??

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

After trying to install update on MacAir error message and then message saying panic (cpu caller 0xffffff800a859241): "Unable to find driver for this platform: \"ACPI\".... I'm worried as all of my work is on my computer and I'm afraid I will lose it all.

I am totally worried I am going ot lose all my data after trying to install update on MacAir. Cannot do anything error message saying panic ....."Unablet o find driver for this platform."

Hi Guys
No good news I'm afraid. I have been through ALL the system caches and files that were updated at the time of said issue. Reset - rebuild and even gone back to my TimeMachine copy from earlier this AM. Nothing! Can only assume it is something deeper in the /usr or var or private folders.....
I have cloned the system and core files (/usr, /private) etc etc to an external HD and it still recreates the fault. I am afraid to say I have no more time at the minute to look at so have put my machine back to 2 hours prior via my TimeCapsule.
I the absense of anyone else or, indeed, Apple fixing in the next 12 hours, will get back onto it from the cloned copy I have kept and see if I can find the offending file/files...
Sorry I don't have an immedaite solution.

Error 7 windows error 126 after trying to install the latest update

error 7 windows error 126 after trying to install the latest update

See Here
Unable to Update or Restore
http://support.apple.com/kb/HT1808
If the device has been modified, this will not necessarily work.

After trying to install 6500 Wireless all-in-one on my 3rd comp, it ceased to work

While trying to install my (less than 2 year old) HP6500 Wireless all-in-one software on my 3rd networked computer, the software installation went into a loop and would not complete the installation. After about an hour or so of waiting, I physically had to unplug the printer & eject the CD. Upon doing so, the printer became next to useless. The printer key pad no longer functions except when I first plug it in, and I can no longer access it from the other 2 original computers, even with USB. The HP solution center says it’s on line, until I go to print via USB, then it says it’s offline. I can hook the USB up on the Widows 7 unit and force it to print Word Office documents, but when I try to print documents on it from either Internet Explorer or Fire Fox it wants to send a Fax??? I've uninstalled and reinstalled the software 3 times on my Windows 7 unit now to no avail. Is it my printer, the printer Firmware or what? I have downloaded and run all the HP & Microsoft troubleshooting tools on the Windows 7 unit to no avail. However; HP downloads will not successfully complete on my XP unit. What should I do? Should I start over with a new wireless printer?
Totally Confuzed

Re: After trying to install 6500 Wireless all-in-one on my 3rd comp, it ceased to work
Ref: 02-23-2012 08:53 AM
12:38 AM 2/24/2012 UPDATE ON WHAT I HAVE TRIED AGAIN:
1. Power Reset on the Printer: Power off the printer. Unplug the power cable from the back of the unit. Wait 60 seconds. Replug the power cable to the printer and power it on. DONE
2. Print a test page: Follow this document to print the test page. PRINTER SCREEN SAYS IT'S PRINTING AND THE POWER LIGHT IS FLASHING LIKE IT'S BUSY, BUT NOTHING IS HAPPENING. ONLY WAY TO USE IT NOW IS TO UNPLUG IT AND START OVER. THIS HAPPENS ALL THE TIME NOW. IT WILL NOT PRINT TEST REPORTS.
3. Create a copy of the printed test page. CANNOT DO NOW - (PRINTER FREEZES UP WITH A BLINKING POWER LIGHT)
4. Print the Wireless Network Test Report (To check if there are any errors) CANNOT DO
Press the Setup button ( ). DOESN'T WORK EXCEPT MOMENTARILY...NOT LONG ENOUGH TO MAKE A SELECTION BEFORE IT HANGS AND FREEZES UP...
Press the Right Arrow button ( ) to select Network Setup, and then press the OK button. CAN'T GET IT TO DO ANYTHING PRESSING THE OK BUTTON.
Press the Right Arrow button ( ) to select Wireless Network Test , and then press the OK button. The Wireless Network Test Report prints. CAN'T GET IT TO DO ANYTHING PRESSING THE OK BUTTON.
If you did not encounter any errors while performing the steps above then I think the hardware is OK. Test the software next. Let's use Windows 7 as the test platform. I DON'T THINK THE HARDWARE IS OK.
1. Download the driver from HP.com. Once it gives you the option to either Run or Save make sure to select Save and then select Desktop as the target location where it will save the file. This is just to make it easier to find it. Once it finishes downloading the file, double click it to initiate the installation process. Follow the on screen instructions until you reach the "select how you want to connect the printer" window comes up. I ALREADY HAVE 3 COPIES ON MY DESKTOP & NONE OF THEM REACT ANY DIFFERENTLY.
2. At the "select how you want to connect the printer" window select USB and then click Next (I think there is a next button). It should asks you to connect your printer but we are NOT going to do that. Place a checkmark on the option on the bottom of the window that gives you the option to bypass the connection phase of the installation. Click Next to proceed. Once the the installation process completes, restart your computer. I HAVE DONE IT BOTH WAYS BEFORE AND CANNOT GET THE INSTALLATION TO COMPLETE ON ANY OF THE 3 COMPUTERS NOW.
If you did not encounter any errors at this point then it looks like the software installation process is good. Proceed to the next test. END OF TEST FOR TONIGHT. THANKS
1. After the computer completely boots up, connect the USB cable to the printer and to the computer. The computer should detect the printer and initiate the HP installation process for it. Follow the onscreen instructions to complete the install.
2. Try printing to test functionality.

HT1199 After trying to install window 7 my new iMac will not reboot back to apple. Black screen "No bootable device -- insert boot disk and press any key". How do I get out of this?

After trying to install Windows 7 in my new iMac It will not boot up back to Apple. I have a black screen with the following "No bootable device -- insert boot disk and press any key". My iMac did not come with a boot disk. What can I do?

Try holding down the option/alt key during a restart and see if you can see/select your boot drive there.

How to stop the spinning ball after trying to install 10.7.3?How

How to stop the spinning ball after trying to install V10.7.3?

Boot from your recovery partition by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
When the Recovery desktop appears, reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

My installation of Lightroom 5 on Windows 7 Desktop gives me an "Installation Failed - Learn More" after trying to install it on the apps page... how do I fix it so I can install Lightroom?

My installation of Lightroom 5 on Windows 7 Desktop gives me an "Installation Failed - Learn More" after trying to install it on the apps page... how do I fix it so I can install Lightroom?

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

HT4623 iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

Obviously since you have iOS 7 you're a developer. As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum. Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
Thanks, and best of luck to you.
GDG

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

My daughter's MacBook Pro was doing exactly the same thing. I don't know if it had anything to do with the latest update. She called me about a week ago saying that her MacBook began running slower by the day . She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning. I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive. She took it to the Apple store. Originally, they also thought it was the hard drive. It ended up being a corrupted operating system (Lion). Apple genius simply re-installed Lion and she's back up and running. Good thing she backed up right before it crapped out. She'll be restoring everything tonight. Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

After trying to install Mavericks, got an error message my hard drive was bad.

After trying to install Mavericks, got an error message my hard drive was bad. Took it in to the Apple Store and the 'Genius' bar guy couldn't see it as an external drive when he connected another Macbook. If I get another hard drive what's involved in getting my system operational again?

Hi there
Looks like I may be experiencing a similar issue to yours as having issues installing Maverick on snow leopard?
https://discussions.apple.com/thread/6286238
Did you manage to get your problems resolved?

Ipod won't work after trying to install Paid 2.0 update

I bought the 2.0 update for my 16 gig ipod touch. After trying to install the update through itunes half way through the update it gave me the message "The ipod could not be restored. An Unknown error occured (6)." I tried to do a restore on the ipod it it does the same thing. Can anyone help? Now after paying for an update I have an ipod that doesn't work at all.
I tried doing a restore using the old software on a different itunes library and get the same error message.
Any suggestions?
Thanks Larry

lukemichael wrote:
ok i have figured out how to fix this problem!! it is simple. make a new account on your computer. Now use the itunes on that account and just plug ur touch in and restore it. It will restore it to the software 1.1.4 . now just go back to your main account on ur computer and plug ur touch in once again and it will restore it to its original settings and sync all your songs and videos and the rest.
I followed the above instructions. Let Itunes 7.7 set itself up on the new account and downloaded the update. The first attempt didnt work but the second attempt after I rebooted the PC I logged in on the new user and booted up Itunes.
When that had finished faffing about I connected the USB cable into another USB port (above the one its just come out of if you get my drift) and it started extracting the software for Restore then it started prparing the ipod for for restore and then started uploading the software to the ipod in which it had not done it before. As I type it has just finished synching the ipod with my current Itunes library on my default windows account.
I am running the update but will have to enter my contacts details again but hey thats no big deal.
So I hope you all get yours to work.
Cheers
Hentis

IPad frozen after trying to install iso 7

Similar Messages

Maybe you are looking for