Ipad not updating to latest os. Stops part way. What is the cause?

I am not sure at this time what version Ipad it is. It is one of our work iPads issued to one of our staff.
Client had issues updating to Version 7.0
Client may revert back to factory settings and start again.
But any information would be helpful..

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
iPad Stuck in Recovery Mode after Update
http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
iOS: Apple logo with progress bar after updating or restoring from backup
http://support.apple.com/kb/TS3681
 Cheers, Tom

Similar Messages

Have to keep refreshing Firefox to see messages received on Facebook, and videos do not play in Firefox 3.6.9. What's the cause?

While on Facebook, I always need to refresh the page to know I received a message, comment or whatever else. Also, while on game sites such as Gamespot, Firefox does not play any videos. All this is happening in version 3.6.9. What is the cause for this?

How ram does your machine have have you tried shut the machine down pull the power plug for a few minutes and plug it back in and restart the computer. The only thing I can think of is Low onn Ram or the speed of your connection. It might be the player you are using as well. download VLC Player itwill play everything.

Ipod will not sync to itunes, just stops half way and freezes the computer

my ipod has suddenly stopped syncing to itunes half way through and freezes the computer. it is not the songs because they sync to my phone. how can i fix this?

Have you tried plugging the Nano into another available USB port or using another USB sync cable? Does it seem to be freeze when syncing the same track?
I assume iTunes is up to date (10.7 at the time of this writing).
See here for more troubleshooting as well.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
B-rock

My ipad is not charging with 10W usb power adaptor ? what are the causes?

My Ipad is not charging with the 10 W USB Power Adaptor Charger ? Please tell me .....What can be the issues with solutions to resolve them ? Even when the USB is connected to computer it is not charging , however , the transfer of data is taking place including Sync. Is there a problem with the charger or the ipad please isolate & inform. Thanks.

1. Clean docking port with clean paint brush
2. Try another cable
3. Try another charger

TS4001 Bookmarks are not syncing to ONE of my Macs, but showing up on other Mac (work), iPhone 4 and iPad 1. Macs are on Mountain Lion. Tried all of Apple's suggestions - and the one Mac is still not updating/syncing Bookmarks or Reading List. What's goin

Bookmarks are not syncing to ONE of my Macs, but showing up on other Mac (work), iPhone 4 and iPad 1. Macs are on Mountain Lion. Tried all of Apple's suggestions - and the one Mac is still not updating/syncing Bookmarks or Reading List. What's going on? Do I have to wait to OS update? It seems lots of peolple were having issues before ML, but I as fine. Since ML, I am having all kinds of issues!

Yeah, I literally have tried everything except deleting my iCloud account (I'm close, but that would require so many changes that it is way too painful to consider at this point).
I am still waiting to hear back from Apple Support. Hopefully something can be done, or they can do a reset on their end.
Thanks for taking the time to respond though, much appreciated!

HT201263 i have tried to restore my iPad from my computer, but it stops ones it gets to the stage where it is updating the firmware. Any suggestion to fix this,?

i have tried to restore my iPad from my computer, but it stops ones it gets to the stage where it is updating the firmware. It will then display " there was an unknown error.....Any suggestion to fix this,?

Temporarily disable antivirus and firewall on computer.

My iPod does not update it self in iTunes. I click on the "update the latest version for your iPod" and it fails. Please help me.

My iPod does not update it self in iTunes. I click on the "update the latest version for your iPod" and it fails. Please help me.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT4972 I am using iphone 4 Geveya in which I have to dial 112 after re-insertion of Sim Card. When i connect my phn to I tunes I got message to update the version of iphone. Some one has informed me that I can not update this phn will stop workin after up

I am using iphone 4 Geveya in which I have to dial 112 after re-insertion of Sim Card. When i connect my phn to I tunes I got message to update the version of iphone. Some one has informed me that I can not update this phn will stop workin after update.
Kindly update me on this whether I need to update this or not.

Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message.

Swf stops part way through in browser

my swf stops part way through when in the browser always at
the same frame...in flash it plays fine...here's a link to the web
page...
http://www.karlyoder.com/wiredchemi...r_symmetry.html
and here's a link to the fla (it was too big to attach)...
http://www.karlyoder.com/wiredchemi...r_symmetry3.fla
also, when right-clicked it says movie not loaded...

Hi,
Try following the steps below and check if that may help:
- Open the HP software by clicking the HP Envy 5530 icon within the Desktop or the Start Menu, then click the Printer Home Page (EWS) link.
- Click the Network tab.
- Depending on your printer model click on Networking and then on Network Address (IP) or click on IPv4 within the active network connection type.
- Click on Manual IP , and then click Suggest a Manual IP Address . A manual IP address, Subnet Mask, and Default Gateway displays.
*Be sure to take a note of the IP address and Confirm the changes, then close the EWS page.
- Click the HP Envy 5530 icon within the Desktop or the Start Menu and click the Utilities tab, then click on Update IP Address.
- Type the manually configured IP address, click on Save and confirm.
- Open the control panel and go to Devices and Printers.
- Right click the HP Envy 5530 icon and select Printer Properties.
- Open the Ports tab.
- Click the Add Port button, select Standard TCP/IP and click on New Port.
- Follow the steps by typing the manually configured IP address and confirm the changes.
Now try printing and check if the issue been resolved.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

When i watch something on you tube or any video, it stops part way through

when i watch something on you tube or any video, it stops part way through the screening and i cannot get it to continue. it is so frustrating!

Go to this link to download the installer and this link to determine which version you have installed. Always get extensions like this from the publisher (in this case Adobe) and not from some website that says you need an extension and offers to install it for you since you may end up with malware instead.
BTW, once the current version of Flash is installed, you can set its preferences to update automatically in the background.

HT1583 sound stops part way through on burned idvd, but ok on computer edit.

Can anyone help, for the first time having a problem with a burned idvd which the sound stops part way through. If sound turned right up on TV muffled sound
is there. Edited on computer and all works fine with full sound right the way through, only trouble is on the disc. Have tried many discs, so does not appear to
be disc failure.
Appreciate any comments please

Hi
FIRST OF ALL - THE MAJOR ADVICE in this forum EVER !
In iDVD - Before Burning the DVD DO !
Save as a DiskImage
Double click on this .img icon
test the new Pseudo DVD (looks like a white hard disk) with DVD-tool
THEN
• DVD Brand - matters
• DVD type used - matters
• BURN SPEED - matters
• Audio file format - matters
WHAT did You use
I only use
- Verbatim
- DVD-R SL
- x2 max x4 - Best / High - IS NOT BEST
- .aiff - NO .mp3, .wma etc alient formats - from iTune EXPORTED OUT as .aiff ONLY
Yours Bengt W

I've just downloaded Sophos (yesterday) and commenced the scan. It keeps stopping part way through, the 2nd time when it was about 98% completed after 4 hours!!!! I've had to start again. What could be causing this? I have Mountain Lion.

I've just downloaded Sophos (yesterday) and commenced the scan. It keeps stopping part way through, the 2nd time when it was about 98% completed after 4 hours!!!! I've had to start again. What could be causing this? I have Mountain Lion.

Thomas A Reed wrote:
You will be advised by people here that Sophos is "junk" and should be removed {...} Sophos actually works pretty well, in my testing, and so I would suspect that there may be an underlying problem with your file system that needs to be repaired.
FWIW, I have used Sophos regularly for several years now (including on my new iMac running Mountain Lion versions 10.8.2 & now 10.8.3) & never had any problems with it on any of the half dozen or so Macs I have installed it on.
Quite a few people automatically assume all Mac A-V software is troublesome junk, & many will leap to the conclusion it is the cause of some problem without considering other potential (& often much more likely) causes, regardless of which A-V product is installed.
Obviously I hope, not all A-V products are alike, so it doesn't make a lot of sense to me to condemn them all because of problems with one of them. Regarding Sophos in particular, finding first hand reports of it causing problems is quite difficult -- typically, if you ask for the details it turns out to be a second or third hand report & there isn't enough info available to know for certain if it is the real cause or not.
This is not to say it is impossible for it to cause problems, just that it is prudent to consider all the possibilities before concluding that any one of them is the cause.

Captivate 8 - Animated text stops part way through play

I have created a presentation with CAP8 and am finding the animated text does not play out in full, but stops part way through.
eg. animation to type [email protected] and then on a new line same text box [email protected]
slide preview it runs perfectly. In the preview next five slides and in publication it runs all of [email protected] and then freezes after typing johnbe
It actually stops the video it seems, as i can hit play to resume, which will then type out the rr, and will complete the email on a third time hitting play.
I get the same thing on the next slide with two of the three text animations that are running simultaneously, and again on the next slide. I want to point out that this is not just on one slide.
I have changed settings on the properties from " rest of slide" to "Duration of animation", and there is no change. I have lengthened the slide timing just in case that makes a difference, even though I am using Shape buttons to progress to the next slide. No change.
Any suggestions please?
Thank you
Claire

Yes here are a couple of screen shots. I am sorry it doesnt show an exact time but with simulation it is at about the 2.5 second mark for the first stop
first error screen
second scrren with the error

Keynote is not responding. I have already worked on my slides for hours, but did not save; suddenly the application stops responding. What's the solution?

Keynote is not responding. I have already worked on my slides for hours, but did not save; suddenly the application stops responding. What's the solution?

If you had never saved the file at any time, you have lost your work.
Go to; Apple Menu > Force Quit
Start a new presentation, and from now on, after adding the first object to the slide, save the file.

I was updating my iphone 5 and stopped half way .what do i do

updating my iphone 5 and stopped half way .what do i do

Hold down the home button and the on/off switch until the Apple logo
appears. Ignore the red power off slider if it appears.

Ipad not updating to latest os. Stops part way. What is the cause?

Similar Messages

Maybe you are looking for