IPad & parallax - Is this a bug?
Is this a bug or am I doing something wrong in Muse?
On my iPad when I am on this page of my site I get this white bar with text on the top and a blank white bar down the right side (highlighted with green arrows). It is not like this on my desktop. It is the only page that has parallax scrolling on it and is the only page that shows up like this.
This looks like it's been sorted now, pardon the pun.
Similar Messages
-
I cannot see my picture stream on iPad with IOS 8.1.3. The pictures from iPad are uploaded and visible on picture stream on iPhone 4, IOS 7. Is this a bug with IOS 8.1.3?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
iOS: Troubleshooting Messages
iOS: Troubleshooting FaceTime
- Sign out and then sign back into Messages and FT. Note you will lose all messages presently on the iPod
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
I am based in the UK and have just got a new iphone 6, everything works well except when i try to turn on the itunes store app - i can do a search and buy music etc that way, within the app, however, if i go to Music, Movies or the TV shows section within the Store app, i get a message come up saying "Item Not Available" - This item you've requested is not currently available in the UK Store, but it is available in the US store. Tap Change Store to view this item". I therefore cannot browse the music, movies or tv shows sections at all, nothing shows up except that message. All my previous itunes purchases have downloaded ok, and i can access them. My apple ID works fine and restrictions on the iphone are turned OFF. The App Store app works normally. Connection etc is all fine and I can access itunes in the normal way on my ipad and laptop, so this is just an iphone problem. Any ideas? is this a bug? I cant find anyone else with exactly the same problem. By the way, the same message comes up when i click on the red Music icon, on the iphone (situated next to the Safari icon) and then go to the "Store" via that app. my playlists are in tact, but as soon as i click that Store button, I am told that the Item is unavailable - not that i have chosen any Item lol, I just want to access the store in the normal way. Thank you in advance for any suggestions you can give
It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
IPad Safari Landscape innerHeight/outerHeight bug still not fixed in iOS 7.1.1
iPad Safari Landscape innerHeight/outerHeight bug still not fixed in iOS 7.1.1
No bug in Chrome or other third party browsers.
When are Apple going to fix this bug? It's painful.
more info here:
http://stackoverflow.com/questions/19012135/ios-7-ipad-safari-landscape-innerhei ght-outerheight-layout-issueTell Apple not other users.
Use http://www.apple.com/feedback/ipad.html -
This morning Find My Phone alert went off on all my devices connected to my Apple ID at the same time, is this a bug or should I be worried that my id is hacked? I didn't have Find My Phone app installed on many of these devices. Please advice. Thanks in advance.
If you have enabled Find My iPhone/iPad on your devices, any one with access to your Apple ID and Password can Play Sound on your devices.
Tap to enlarge image. -
Under new format when playing music each track after the first starts in low volume then kicks in within 3 seconds. very irritating. is this a bug?
I'm having the same issue on my iPad (the "new iPad" / 3rd gen with retina display and 30 pin dock connector) after downloading iOS 7 (is that what you meant by the new format, updating to iOS 7?).
The music will play quietly for a few seconds then it will play at the volume it's supposed to. -
How do you unlock your AppStore Lock, seriously this is bugging me because the App Store costumer service is down , APPLE HELP ME!!!
You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
Cheers, Tom -
We have 2 iPads (2nd and 4th generation). Both have been air printing without trouble to our HP 6700, which is on Apple's list of supported printers. Both iPads were updated to OS 6.1 last night. Now when attempting to air print something, the HP 6700 does not appear on the printer options list of printers to select from. Interestingly, the other supported printer, and HP 8500, does show on the list, but when attempting to air print to it, this results in an error message "An error occurred printing this document." This error happens in multiple apps that support air printing. Is this a bug in iOS 6.1?
The printers are visible in AirPort, AND I can print from a computer (MB Air and a Dell Win7) to the HP 6700 without problems, but no longer from the iPads. What gives? I have powered down the HP 6700 and back up. I even restarted the AirPort Express. The problem persists with printing from the iPads.Hi, everyone, I yesterday bought a HP 6700, after setting everything like supposed to be, I could scan to computer and by eWeb service but not Print directly from iMacs (10.7.5 and 10.8.5) or iPhone, after installing things as suggesting here and HP support site, I decides to called HP support, and they do something, first they force to eliminated all printers from Print & Scan pannel (system preferences) by right-click over printer list on that pannel, and then create the printer from the IP address instead of by default selecting it from list (bonjour), that make the iMacs start printing fine. But iPhone still not. Then HP support suggested that maybe my router didn't support bonjour or it was not activated, so I tried with my phone company with no luck, since they told me that they never hear about this and that my router didn't support it, even if I think they didn't know, period. So I decided to create a network over my regular network, using an Airport Express, I create a new network (connected the Airport through ethernet cable to the router), and then place the iMacs and iPhone over the new network, restarted printer and iPhone, and then finally the iPhone could print on the HP 6700.
So I suggest you try first force the printer using the IP address, thaht solved the problem with iMacs, and then if you can, used another router cause maybe the one you use have "issues" with bonjour/airprint etc....
Hope this help. -
Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?
Same problem here (no graphics in header or footer) and the problem has been reported months ago. It is another bug/feature lost when Apple moves from 09 to the iCloud-compatible versions. Complain to Apple, you may have better chance than me and they may finally listen to their users....
-
Is this a bug in OWB 11.2 - importing table metadata for character columns
The Oracle® Warehouse Builder Data Modeling, ETL, and Data Quality Guide provides an overview of the data types supported.
http://docs.oracle.com/cd/E11882_01/owb.112/e10935/orcl_data_objx.htm
It says that for VARCHAR2 data type it saws (http://docs.oracle.com/cd/E11882_01/owb.112/e10935/orcl_data_objx.htm#CHDFIADI )
"Stores variable-length character data. How the data is represented internally depends on the database character set. The VARCHAR2 data type takes a required parameter that specifies a maximum size up to 4,000 characters"
That means , I guess, it says that when I import a table, any columns of type VARCHAR2(10) in the database should have its length show as characters in OWB, so a column of type Varchar2(10) in the Oracle database, should be shown as Varchar2(10) when imported into OWB table metadata via the OWB import function.
However, if I have a database that set-up as a single-byte and import a table using the OWB import function a column that has a size of e.g. 10 in the database, is imported as OWB table metadata and the size is 10. Correct, I am happy.
However, if the database is modified to support multi-byte characters, ALTUF16 encoding with the semantics set to "CHAR", then when I import the same table into OWB, OWB reports the size as 40, I guess its 40 bytes as in 10 characters @ 4 bytes per character.
Is this a bug in OWB, as the datatype in the Oracle DB is varchar2(10), should OWB after importing a table not also report the column as VARCHAR2(10) ? Currently, is shows the column as varchar2(40).I noticed that myself in our project.
Our varchars2 are defined as VARCHAR2(xxx CHAR) - OWB puts the size*4
In fact if you have special characters like umlauts (ü,ä,ö,...) it will use 4 bytes per character.
You can try it yourself. Define a Varchar2(1 CHAR) and manually change the size of the Column in your mapping inside OWB (in filters, joins or your target table).
Then shoot an umlaut through the mapping and will end up with a "too small" error.
Dont mind the size*4 issue - we totally ignored it and run without error since 4 years now. -
I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.
Close ... before going for a specific Cisco app ... lets find out some details:
Host we need more details:
What is your server environment (Windows Server, or Mac OS X Server, or Linux)?
What security is implemented in your environment - as what is restricted (RDP for all or specifc credentials on all machines? Are you part of local admin group to the server you wish to connect)?
Does your environment Support CISCO IPSec connection? If so use Settings> VPN and IPSec tab to enter VPN details, if not then go with above suggestion. IF your restricted to RSA then either built in VPN settings or 3rd party app for RSA would suffice.
Finally, there are many RDP applications out there I use "Mocha RDP Light" (free minimal ads when launched not when connecting). -
Open Cursor Issue because of file browse Item - Is this a Bug in APEX 3.2
Hi All,
I am using file browse Item to upload file into the database at two places in my application, but it seems whenever I am submitting those two pages, with file path or without file path, its opening an cursor which remains open after that, because of this open cursor count in the application is getting exceeding every time.
For testing this I have made an dummy page containing just file browse item and submit button, and still it is increasing the open cursor count.
Is this a bug in Apex file browse item or there is some other way to handle this.
Please kindly help me in the above issue as this is affecting the production application.
Thanks & Regards
Sanjay
Edited by: user11204334 on Dec 5, 2010 9:57 PM
Edited by: user11204334 on Dec 5, 2010 9:58 PMHi,
One observation, Apex is switching the Session ID after one got killed ? I was working on Apex page with browse Item to test open cursor count,
after killing the SID (227) on which the open cursor count was getting increase, it APEX automatically switches to new SID(149) for that session.
Now the problem is even if I have two SID's and one hits the maximum open cursor count, It is not switching to other SID instead the whole application becomes unavailable.
STATNAME SID VALUE USER
opened cursors current 20 14 APEX_PUBLIC_USER
opened cursors current 149 74 APEX_PUBLIC_USER
opened cursors current 194 71 APEX_PUBLIC_USER
opened cursors current 211 5 APEX_PUBLIC_USER
opened cursors current 227 325 APEX_PUBLIC_USER Killed
opened cursors current 244 15 APEX_PUBLIC_USER
opened cursors current 20 14 APEX_PUBLIC_USER
opened cursors current 149 76 APEX_PUBLIC_USER
opened cursors current 194 71 APEX_PUBLIC_USER
opened cursors current 211 5 APEX_PUBLIC_USER
opened cursors current 244 15 APEX_PUBLIC_USER
Please kindly help in this.
Thanks in Advance
Thanks & Regards
Sanjay
Edited by: user11204334 on Dec 8, 2010 1:02 AM -
Hi - I keep receiving the following error message on a song I purchased from itunes and am now trying to drag and drop to my iPad: "you must download items from icloud before you can copy then to iPad" what does this mean - please help! Thank you
Hi Poonam26c,
If you do not have a local copy of a song which you have purchased (i.e. it is available via iTunes in the Cloud), you may need to redownload it before you can transfer it to your device. You may find the following article helpful:
Apple Support: Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
Regards,
- Brenden -
Can anyone help me on the issue which my customer is facing for BoEdge3.1
Concerning Error Message: You do not have enough Named User Licenses to make this user a named user. You have 55 Named User Licenses. (FWB 00013)
This is the error message she was receiving when trying to change an
existing user from Concurrent to Named under the Connection Type on the
Properties panel.
The current workaround was to delete the existing Concurrent user, then re-add the same user as Named.
She have been going through this process of deleting existing users, and then
re-adding them as Named and it was working okay. Then, it stopped
working and she started getting the same FWB 00013 error message again.
She was not able to create any Named users now. Basically, the workaround
worked for a while - then stopped working.
She currently has a total of 88 users. 21 of them are named. 67 of them
are Concurrent. She is licensed for 55 Named.
Once again, the system thinks she has 55 users marked as Named. But
there are only 21 marked as Named.
She did notice that as she was going through all of her existing list of
users, in alphabetical order, she was opening the Properties tab and
checking the Named/Concurrent status - as she got to the 55th user in the
list that is when she started getting the error message again.
Is this a bug with BoEdge3.1?
And I got an ADAPT01194692.
I am not sure that Is the ADAPT related to this issue.
Please help me its very critical.Hi Salena,
If you are an SAP Employee, request you to post this question at
https://cw.sdn.sap.com/community/bobjtc
Cheers,
Subhodeep -
JDev 9.0.3, Business comp wizard, is this a bug?
Howdy,
Found something that perhaps is a bug, hoping you guys have fixed for the real release.
1) Create a database connection, but don't fill in username/password. Don't check deploy password.
2) Create new workspace and project.
3) create new business component package in the project. On step 2, point Connection name to username/password-less connection. Alert says prompt will ask for credentials. No matter what I put in, with valid username/password entries, a Connect Error pops saying invalid arguments in call. Exception: oracle.jdeveloper.cm.CMException.
Is this a bug? We're using dynamic credentials in our app with data sources, so username/password is left off.
Thanks,
Joe Tseng
Technical Management Consultant
TUSC
[email protected]Joe,
I've filed Bug#2561459 to track this problem.
Maybe you are looking for
-
How to reflect variable price in outline agreement
We procure many very complex tools that have options which significantly affect the price of that tool. We would like to be able to reflect those price differences in the outline agreement by option within the following boundary conditions. 1. Do no
-
How to retrieve input data from a HTML form in the UTF-8 cha
I encountered the following problem with a JWeb Application: I tried to write a JWeb-Application for OAS 4.0, that retrieves input data from a HTML form and writes it into an Oracle database. All processing should be done in the UTF-8 character set.
-
Who Make a connection from WebDynpro to SAP R/3
Hi All Pls...Can any one explain me the settings for making connection From WebDynopro to SAP R/3 ??? Regards Prasad K
-
External superdrive won't mount to desktop
I have an almost new external superdrive attached to my January 2014 iMac 27". It has seemed to be slow to load up the DVDs that I have my images backedup on and today it refuses to mount on the desktop. Because it's not on the desktop or in the Fi
-
Warning(3806,7): PLW-06002: Unreachable code
Why do I got this warning: Warning(3806,7): PLW-06002: Unreachable code for this code: if p_ws = 'D' then raise_application_error(-20020, 'My Error'); else -- <--Here return; end if; Thank you in advance. P.S. p_ws is of varchar2 type.