IPad Usage not correctly showing!
I have 3rd Generation ipad 32GB Wifi + Cellular running on iOS 7. When I see usage [Settings>General>Usage] its only 6 GB Available and 21 GB is used.
When I manually total the size of applications its only 6.5 gb, then where is my extra space going. I have tried rebooting.
go back to settings and look at usage again - then wait a minute or so. a listing of apps will appear, and if you tap one, you will see the total program, p,us data associated with that app. you may have a lot of data associated with some of your apps. for example, i have pages. the app shows as 373meg. when I tap the app - it shows me total program and data is 1.4G. Add those up, and you will approach the larger number you see above.
pictures, audio, video, and comic books eat up space.
Similar Messages
-
Freight Charges does not correctly show Tax % / calaculate
Hi
When I try to add freight charges to an A/P invoice the tax group shows correctly (V1) but the Tax % shows 0.0 instead of 7.5 on every row/type of freight and therefore the Tax is not calculated automatically.
Somebody an idea whats wrong?
Thanks
FranzProblem solved.
As a difference to all the other modules, A/P Invoice does not have the current day as default posting date (maybe this a bug). Since the Tax calculation needs the posting date, it does not correctly show the Tax on the main form as well as on the freight dialog, it shows the correct code, but always with 0%.
So, for correct tax calculation, always make sure the posting date is entered before.
@SAP: Change the behavior with the default posting date, as it is in all other modules.
Best regards,
Franz -
Ipad photobooth not working, shows curtain closing but camera seems to be off
ipad photobooth not working, shows curtain closing but camera seems to be off
Have you tried closing the Camera app completely ? From the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Submit button in inserted HTML is not correctly shows
Submit button in inserted HTML is not correctly shows.
<input type="submit" name="submit" value="Submit">
Button doesn't have a round gradient background like in real HTML.
Looks like Muse translated it not correctly. Muse doesn't use inserted code directly to the browser.
The ??? is how to see a real html appearance?Dear All
I feel adobelance is giving us a pretty good answer.
I tried code in Dreamweaver and got:
And in Muse I got:
I did have to change the border from outset to solid grey (to give it the colour) - the main difference seems to be the font. It was close enough for me, though.
I am not a Dreamweaver developer and this is the first code I have run in Dreamweaver (successfully, anyway).
Muse allows Designers to sketch web sites and as such is good - but it is not Dreamweaver. I admit I subscribe to Creative Cloud - so I can use Dreamweaver or Muse and am using the latest version but I am a fan of Muse so far.
My HTML in Muse is
<form>
<form method="post" action="senddata.php">
<label for="lastname" style="color:black; background:light grey">Last Name:</label>
<input type="password" id="lastname" name="lastname">
<input type="submit" value=" Submit Form! " style="border:2px solid grey; color:black; background:light grey">
</form>
I do hope this assists you all.
Kind regards -
Firmware version not correctly showing up
I've updated my firmware but it only correctly shows the correct version on certain pages in my wireless control page.
Some pages still show the old version, more specfically the wireless page which had some changes in the new firmware and i need do encryption on.
anyone know the problem?hi...after upgrading firmware on the device have you reset it?? if not try resetting the device back to default settings and reconfigure it...also let me know the model and version no. of the device and firmware version...
-
Website menu not correct show wit ipad/imac
Dear sir,
This is mayby not the wright place to ask this question (sorry).
The website www.a2models.nl is shown correct in all browsers on a pc, buth when I look with an ipad/imac with safari, the end of the horizontal menu moves below.
The homepage in Dutch and English is made with Dreamweaver. I integrated a webshop from Mijn Webwinkel (Logivert).
The layout.html is made by a webshopdevelopper, but can't/won't help me, because I've made a little change in the layout (only a horizontal menu in red).
The container is 700px I've tried to make it bigger but it didn't help or made the with auto which also didn't help.
Took some space but this didn't help.
What am I doing wrong?
Thank you verry much for your reply.
CarlaNot much to go on there.
You basically said it is broken with no link to see it , no information on how it is built or anything
Literrally could be 100's of reason for incorect css, malformed html, javascript error and more.
You need to at least post a link so people can take a look. -
Installed NM version 5.1.9005. Went great and provides excellent networking.
However, when I look at my daily reports for both my system and my wife's laptop, the reports say under "Program Usage" that the browsers (Firefox) were in use for so many hours, yet under "Web Browser Usage" the reports say " No Web Browser Usage was recorded for this computer yesterday. Either the browser was not used, Network Magic was not running, or an unsupported browser is being used on this computer."
When I click on "What's This" to see what the headings in the report mean and show.....it says that the two supported browsers are IE and Firefox and that their usage should be shown to inlcude which websites have been visited.
If I click on "See Report on Web" at the bottom of the email, it shows some weird website (http://bigbulkmail.cn) that I supposedly visited. My wife's on line report shows no usage.
I use Embarq DSL with an Embarg provided modem hard wired to my router (WRT54G ver 6 - firmware ver 1.02.5) (I know it's wireless but prefer it this way)
Operating system is Windows XP Home (SP3) using windows provided firewall and ESET NOD32 Antivirus software.
Has anyone else read thier daily usage reports and possibly noticed this inconsistency?
Anyone got any idea as to why NM would not recognize either system's browser usage?
Thanks in advance for any help. NM is a great program and has allowed me to finally network my 2 systems with comfort and ease......let's just say I'm geek-i-ly challanged. ))))
BillHi All,
http://go.networkmagic.com/redir/network-report-more-info?lcid=1033
Internet Explorer Browser History
For Network Magic Premium users, the Internet Explorer Browser History list shows the Internet sites visited by a computer for the previous day. It monitors only those sites accessed by a Microsoft Internet Explorer Web browser. At this time, it does not monitor Web sites that are accessed by other Web browsers, such as Firefox or Flock.
Internet Explorer must be the Default Browser on the Computer you are monitoring.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router. -
New iMa..old iPad and movies that are in iPad already not showing?
I have a new iMac and have transferred my iTunes from a MacBook Pro.
It didn't transfer so smoothly as all the playlists disappeared and some of the movies couldn't be copied.
I have now tried to add new playlists and movies with my previously synced iPad.
When I try to copy movies over it tells me my iPad is almost full(it does have the movies that were previously synced with the Macbook Pro still showing).
When I select the On This iPad option it only shows the 3 movies that I have recently added.
Initially a message came up saying that 2 itunes libraries couldn't be used (I don't remember the exact message)..I selected the option to delete the iPad and sync with this library but nothing happened.
Even the bottom tells me there is still 15.80GB free,yet when I try and add anything else like another movie or more songs it tells me the iPad is full?
Any suggestions?What you are doing is now clear to me, you are explaining it perfectly. You set the iPad up via WiFi, visit you have not synced with iTunes on your computer yet.
I have one more "card to play". If this doesn't do it, I am totally stumped. There is no reason why previously purchased songs and videos - that are showing up in the purchased tab of iTunes and have been "downloaded" to your iPad - should not be showing up on the iPad.
Sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then see of the songs are there. -
i connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks
i have reset the ipad and restored it to no avail
-
Artwork on my iPad does not match iTunes and is not correct for movies, TV Shows Nd some songs
Artwork on my iPad does not match iTunes and is not correct for Movies, TV Shows and some songs & Albums. Is this issue resolved? If so what was or is the fix. I have not been successful in locating that. I found posts stretching back into late 2010.
most of these items were downloaded from eihter iTunes or in the case of movies, imported into the app and then loading them to TV Series or Movies as appropriate. They were all fine until about two days ago when I did a sync. Then the artwork went haywire. I tried manualy removing and replacing the artwork in iTunes with the correct jpg's. and then re-sync. iTunes shows everything OK, but the iPad is the one with it all messed up.
-
I carried out a recent software update and there after that my itunes music would not sync in the normal way. My music only shows on my ipad when connected and in music summary and this is shown as grayed out with a broken circle icon beside any new music which has been inported to my itunes account via my laptop. In the past when i connected my ipad to my laptop to sync it would ask if i wanted to transfer from ipad or not. This does not happen now at it goes straight into sync mode.
Hi,
This sounds so frustrating. If any processing of sound, e.g. through Logic, through Wiretap, or you might try Garageband (which I assume you have tucked away somewhere), produces the problem, then its hard to blame the software of the individual program. This leaves OSX and/or Coreaudio, or a hardware problem. Sorry if you've already reached this stage. This would mean a reinstall of OSX (or an upgrade, if you're thinking of it), or addressing the hardware issue. I know I had some very bizarre things (and repetitive) happen to me with faulty memory, or memory that just wasn't seated properly in its slot. You could start out by running the hardware test and go from there.
Good Luck,
Ray -
dueing the update IOS 7 7.0.2, ipad show the message is contact the itunes, when I back the house, ipad contact the PC and itunes for recovery the ipad but unsuccessful. Now ipad is not start.please help
I hope this helps. If I understood your question properly, it is the same or similar problem many, including myself, had with the IOS7 update. I'll relay my situation & what I did to rectify it. I have the iPad2 & MACBook Pro. I have an iPhone 5 but won't be updating it.
IF YOU HAVEN'T YET UPDATED YOUR iPAD TO IOS 7... DON'T. NOT UNTIL YOU'RE CERTAIN YOU HAVE BACKED UP YOUR iPAD, AT LEAST. BE ABSOLUTELY CERTAIN YOU HAVE BACKED UP YOUR DEVICE.
FIRST: BACK UP YOUR IPAD, & ALL YOUR DEVICES.
NEXT: CHECK FOR UPDATES ON ALL DEVICES.
I updated my iPad while away from my main wifi connection because using my main wifi for the last update subsequently interfered with my connection thereafter. New problem now.
1.) Once I updated (was it successful/unsuccessful?) Because...
My iPad showed a large apple with a line underneath; then it illustrated & said, "connect to iTunes." i can't accessa thing. (Huh? Doesn't Apple know people TRAVEL FAR away from their MAC with their iPads? I WAS RUDELY LEFT WITH AN INOP DEVICE on the road.)
2.) On my MAC: I checked for all updates, & ensured my iTunes was updated.
3.) I followed thre following instructions from a website (http://www.digitaltrends.com/mobile/ios-7-problems/) I found when researching this common problem. iPhone... iPad... same instructions...
...connect to iTunes and try DFU (Device Firmware Upgrade) mode.
Potential solution:
Hold down the Sleep/Wake button to turn your iPhone off.
Open iTunes on your computer and connect your iPhone.
Hold down the Sleep/Wake button and the Home button together for ten seconds, and then release the Sleep/Wake button.
Continue to hold down the Home button until you see a pop-up on iTunes stating that “iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.”
Your iPhone screen should be blank, if you see a logo or message on it then you are not in DFU (Device Firmware Upgrade) mode.
Select your iPhone in the left hand column of iTunes and select Summary then Restore.
You may need to install the iOS 7 update again.
------------------ THIS WORKED.
I followed the instruction & so far so good. DO NOT DISCONNECT YOUR iPAD! It will continue to prompt you through SEVERAL items, including the re-installation of one of your previous back-ups. It appears the back-up was successful & that everything is now back to normal.
Except that now I'm stuck with the juvenile appearance of this new IOS. My Notepad no longer looks like a notepad. Why don't I just type on DOS? My APPLE easthetice have disappeared. If I can, I will revert to IOS 6.
Read more: http://www.digitaltrends.com/mobile/ios-7-problems/#ixzz2g7Y2neAU
Follow us: @digitaltrends on Twitter | digitaltrendsftw on Facebook -
This is not correct solution. I have fresh/new copy of Windows 7 64 bit and I have the same problem.
Autorun only shows the Apple Bonjour service. It started when try to sync more than one iphone over WiFi. I have two iphones and an iPad. I turned off syncing over WiFi and still has high CPU utilization. One of the CPU's is pegged at 100%. It is the AppleMobileDeviceService.exe process.For the record, I then followed the suggestion of MarcDCMB in https://discussions.apple.com/thread/4291206 of just manually restarting the Apple Mobile Device service in Windows services.msc once each time after starting iTunes and the service no longer hogs CPU after that service restart. Not too painful as a work-around, and apparently an effective one, but clearly not a solution to the problem. Again, as above, all the other solutions didn't work for me and I have no conflicting software as far as I can tell. So you'd have to say this Apple's problem.
Also FTR, I am still on the 5.2.0.6 version of the Apple Mobile Device Support MSI and I don't know if that is relevant to this work-around working but my sense is that it is NOT relevant. I'll report back on this thread if I re-upgrade and the problem returns in spite of the service-restart approach. -
IiPad is stuck in the iTunes connect screen. I have held the home button down while plugging the iPad in and still nothing. Hard reset isn't even doing anything. It's not even showing up under my computer. Please Help
Did you get a message that the iPad is disabled?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)
Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.
Maybe you are looking for
-
Mac OS 10.4, new Firefox not compatible, old Firefox disappeared
I got an on line offer to install the new Firefox. Clicked yes, tried it, but it is not compatible with my MacOS 10.4.11. The older Firefox--along with ALL my bookmarks and notes, disappeared. I am trying to update profile information for an airline
-
a week o 2 ago it started booting itself, usually when playing cs, or when surfinwit firefox as browser.. think it may have done it with ie, aint sure.. and also when playing it minimizes the game into tray.this occurs with nfs most wanted and cs. i
-
Separate document at chapters? Script?
I'm working on a book for ePub and have a document that has all the chapters in one file. But we want each chapter to start on its own page. The way I know to do this is with the Book feature and new documents for each chapter. How would you handle t
-
I have an iphone 3gs that has a password on it. I forgot the password and got a new iphone. So how can i bypass that password and be able use the iphone as an ipod? I have been trying to do it. I am scared to put my simcard in it.. Should I?
-
Hi, as of today I can't access Gmail via Apple Mail anymore. Last night I updated on Macbook Pro and ipad, and both don't allow me to access gmail anymore. Gmail still works on my iphone, I guess, because I didn't update that one. Can anybody tell m