IPhone 4 Default Wallpaper change to a Caucasian Man after update to 4.3.1

Hi, actually i am not sure what is going on here as after i updating my iOS 4.2.1 to 4.3.1, the Default Wallpaper will automatic become a Caucasian Man with some wording "is never going to give you" on the Top of the wallpaper. I had try to change the wallpaper and after restart the phone, The Wallpaper will automatic change to the Caucasian Man agaan. I feel very fed up now and i hope there is someone can help me to solve this problem. I had try 2nd time Restore but it is still the same. Somebody told me this is Virus. So, please help me.
Thank you.

Hey, ericcyh77
You have jailbroken your phone, right, so that bug comes with it, I think it is a photo of one of the Jailbreakers.
Just make a clean install from tunes, and enjoy!

Similar Messages

  • My iPhone 5 suddenly could not hop onto LTE anymore, after updating to IOS 6.1

    My iPhone 5 suddenly could not hop onto LTE anymore, after updating to IOS 6.1. I know there is LTE coverage at my house, since before I updated it, it could hop on to LTE just fine, in the same location. My Carrier is CSL Hong Kong. Does anyone have this problem? If so, does anyone have a answer to it?

    Hi AEEA-Family,
    I also did the update this morning and had the same problem also on Vodacom. The whole morning after the update I have No Signal, turning the phone on and of gives you signal for a couple of minutes then it drops again to no signal.
    I've just made the following changes on my Phone and all seems ok again.
    Here are the steps I took to resolve it on my phone.
    1. Go to "Settings" > "Carrier" > Turn off "Automatic", wait for list of Carriers and select "Vodacom-SA"
    2. Go to "Settings" > "General" > "Cellular" > Turn off "Enable LTE"
    3. Go to "Settings" > "General" > "Cellular" > "Cellular Data Networks". Then Change EVERY APN from lte.vodacom.za to internet
    After I made all those changes I did a hard restart of the phone and now all seems fine.
    I suspect the update this morning Enabled all Vodacom's LTE settings, yet Vodacom is not 100% LTE yet in our areas and this is causing the problem.
    Hope this helps other people.

  • HT1222 my iphone 4S no longer plays music output to speaker after updating to version 6.1.3.  I am unable to reset the phone to an earlier version!  How do I get my audio output to speaker back? (music, audible, youtube, netflix))

    my iphone 4S no longer plays music output to speaker after updating to version 6.1.3.  I am unable to reset the phone to an earlier version!  How do I get my audio output to speaker back? (music, audible, youtube, netflix)

    So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
    As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

  • Screen resolution changed only in the browser after update of version 9.0.1 how do I change it back

    Screen resolution changed only in the browser after update of version 9.0.1 how do I change it back?

    http://kb.mozillazine.org/Screen_resolution_changes_when_launching_application ?

  • Regarding "Change Indicator + History Column + Refresh After Update"

    Hi,
    In our app, we are not using any separate column for change indicator and using LastUpdateDate as both Change Indicator and History Column(Modified On) as well.
    The problem is that when 'Refresh After Update' option is not selected for this column, then RowInconsistentException is throw on commit for multi user scenario, and when 'Refresh After Update' option is selected for this column, then exception is not thrown but value is also not updated. Here is the summary of observations:
    Settings for LastUpdateDate Column:
    Only Setting History Column (Modified on)
    Single User - Value Updated , no exception is thrown.
    Multi User - throws (oracle.jbo.RowInconsistentException) JBO-25014: Another user has changed the row with primary key oracle.jbo.Key[3 ]. for second user.
    History Column ( Modified on ) & Change Indicator property checked.
    Single User - Value Updated , no exception
    Multi User - throws (oracle.jbo.RowInconsistentException) JBO-25014: Another user has changed the row with primary key oracle.jbo.Key[3 ]. for second user.
    History Column ( Modified on ) & Change Indicator property checked & Refresh After Update option enabled.
    Single User - Value not updated, no exception thrown
    Multi User - Value not updated, no exception thrown
    What I want is that in multi user scenario, the value of LastUpdateColumn should be updated and no exception should also be thrown.
    Is this a bug in ADF Techstack or am I missing something?
    Thanks,
    Lalit.

    First and Second scenario are as expected.
    1) Only Setting History Column (Modified on)-> Last updated value will be updated when a user changes anything in that entity. But if another user tries to update the entity on top of a stale state then lost update detection is performed by ADF by comparing every attribute of entity against current values in database. So it will give error.
    2) History Column ( Modified on ) & Change Indicator property checked.
    Same thing will happen as in case of first scenario but this time detection of lost update will be more efficient as framework will check only that column for "lost update" detection for which change indicator is selected.
    But for the third one where you have selected the history column LastUpdatedDate as a change indicator with "Refresh On Update" selected, the behaviour is strange. I do not know why the last updated date is not updated after a commit. It does not throw any error also which it actually should. It is not detecting lost updates in this scenario. Probably because the only change indicator LastUpdatedDate is not changed.
    Regards,
    Harmeet

  • Why does an iPhone/iPad default calendar change?

    Hi,
    I'm working with several hundred iPhones and iPads, and I'm having difficulty understanding what causes someone's default calendar to change.
    I push an ActiveSync profile through an MDM solution, and on a brand new phone that becomes the default calendar.
    Sometimes when I deal with a device later, I see that the default calendar has been changed to either the iPhone calendar, or an iCloud calendar.
    What I want to know is *WHY* a calendar changes? Does it change when someone:
    adds an iCloud account
    adds the gmail/yahoo/outlook app
    adds another native mail account
    whenever there's an activesync issue
    connects to a computer with iTunes
    accepts a meeting invite
    Really any information or experience anyone can provide is helpful. I want to find out what circumstances or changes would require someone to verify their default calendar.
    thanks!

    That's actually become our resolution is to have them change it back. Thanks for the suggestion though.
    Unfortunately I can't tell what changes it in the first place. I've several devices of my own, and immediately after enrolling in the MDM, one of the devices has the calendar set as the activesync one, and another is the on-device calendar.
    There has to be something that triggers this, but I haven't been able to effectively reproduce the problem, but I would expect that the ActiveSync calendar should become the default calendar, but perhaps my expectations are misplaced.

  • HT4623 After updating to IOS 7.0.4 for my IPhone 5 I noticed that the pictures I take are not uploaded to my PC in photo stream any longer.  I have not changed any of my settings after updating from IOS 7.0.3.  What could be wrong?

    Since updating to IOS 7.0.4 My pictures no longer automatically load to my PC's photo stream folder.  I have not changed any settings after upgrading from IOS 7.0.3. What could be the problem?
    Thanks.

    mouse1832 wrote:
    I've been to apple to speak to one of the so called genius' and even their baffled by the problem
    and they told you , "Oh well" and you left without getting it resolved?

  • Can't change account name in icloud after updating my email account

    Hi -
    I changed my Apple ID to a new e-mail account.  When accessing iCloud from my iphone 4s, I am unable to change my account name to match my new Apple ID & email account.
    Any ideas?
    ESM

    To change your iCloud ID, go to Settings>iCloud, tap Delete Account then sign back in with the changed ID.  This will delete the account and your synced data from from device but not from iCloud.  Provided you are signing back into the same account your data will be synced back to your device when you sign back in.
    Before deleting the account, save your photo stream photos to your camera roll (tap Edit, tap the photos, tap Share, tap Save to Camera Roll).

  • IPhone 5s will not show in Itunes 11.3 after update

    Hi Folks,
    Updated iTunes to 11.3.0.54 and restarted my machine (running win 8.1).  Now when I dock the IPhone (5s running 7.1.2) it shows the 'Trust' prompt and when accepted, sounds a tone, then does nothing.  ITunes does not show any phone connected - no errors are listed in the Windows Event log.
    Done all the usual things, restarted both devices, unplugged etc. but still the same issue.
    Anyone have a fix for this?

    Thanks TwoSeven- I had exactly the same problem with my 5S and your solutions has fixed it.  It is however appalling that we should have to suffer these problems and waste so much time and effort trying t resolve them after a relatively minor update of iTunes.
    Apple - get your act together and thoroughly test your software before you unleash it on the innocent!

  • IPhone emailed pictures no longer showing up as attachments after update to IOS 6.1.3

    When emailing photos, they no longer show up in my Outlook email as attachments after I updated my iPhone4S to IOS6.1.3.  They did just prior to this update. Anyone know why?

    You should be able to right click and save the or copy the image. But, there may be a configuration in Outlook that is determining how the attachement is encoded or handled preventing this. (could also be on teh Exchange server).
    For what it is worth, I test from my iPhone to my work account (Outlook client via Exchange server) and did have an issue.
    Do you use a signature on your iPhone? If not, set one and try that. I know it sounds odd, but give it a go.

  • IPhone 4S no longer recognizes back camera or flash after updating to iOS 7.1.1

    I tried force quitting the camera app, then resetting, and restoring.
    The camera app displays a black screen and is nonfuncitonal.
    Any other apps that use the back camera are unable to use it.
    Flashlight app, which uses the flash, reports that no flash is detected.
    This happened right after installing iOS 7.1.1 so I don't believe it is a hardware problem.
    I think it is a bug in iOS 7.1.1 for the iPhone 4S.
    What can I do?

    Hello DanMBoston,
    It sounds like you are unable to use the flash or the rear camera since updating to iOS 7.1.1 even after quitting the app, restarting and restoring from a backup. That is where I would have started as well. I would next restore your device one more time, but as a new device rather than from a backup with this article:
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/ht1414
    If it works when set up as a new device, restore from your backup to see if it still works, or if there is an issue with the backup file.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • IPhone 4 no longer working with Mophie  Juice Air after updating to OS5.1  Thoughts?

    I have a new Mophie Juice Air for my iPhone 4.  The phone does not recognized the fully charged Mophie however, if I plug the case into the charger the phone will recognize the charger.  Any thoughts?

    Odd 3Gs recharge issues galore. My problem is somewhat similar and I believe it is an iPhone issue and not a juice pack issue. Fully charged iPhone, left on, over night (7 hours) and not used, still has reasonable battery power left in the morning, almost full in fact.
    Take the same fully charged iPhone and place it in the iPhone dock connected to the MacPro and the charging sign shows up. Turn the MacPro off overnight and in the morning the iPhone is dead, fully discharged.
    Take the same fully charged iPhone and seat in the fully charged JuicePack Air with the Juice Pack switched to charge the iPhone (green button) and 7 hours later both the JuicePack and the iPhone are dead, fully discharged.
    Repeat this process with the JuicePack switched RED, not charging and the iPhone will be fully discharged but not the Juice Pack 7 hours later. Yes, the Juice Pack will then start to charge the iPhone when switched to green.
    It would appear that when connected to any utility (JuicePack, Dock etc.) the iPhone will start to discharge when that power source dries up. It is as if the dried up power source is draining the power from the iPhone !

  • IPhone Sync stuck at step 2: Backup.. After updating itunes to 10.6.1

    I have a iPhone 4 for over a year now and have never had ne problems. But after the last update of itunes to v10.6.1.7 each time I sync my phone with my pc the sync process hangs on step 2: backup.
    I have read a lot of forums and have tried everything. i have even tried formatting my pc and install everything from scratch but nothing seems to work.
    PLS HELP..

    Since you had to force end process whilst backing up, I would think your backup folder and files might be corrupted.
    Go to this location to delete your backup folder (folder name contains 40alpha numerics e.g.
    7c67e6a6537b50de27c08fdc8c68d8dc302e04ff)
    Windows XP
    C:\Documents and Settings\[username]\Application Data\Apple Computer\MobileSync\Backup\
    Do a netsh winsock reset again. After restarting windows, sync again.  Bear in mind it's a new backup so the backup process may take a longer time.  So be patient and let it run for hours and see it will work this time.

  • IPhone 5 ios8.1.3 my Telephone Looses connectivity after Update ios

    HEllo
    i have a iPhone 5
    after installier iOS 8.1.3 my phone is Creating problems.
    im not able to telephone.
    loosing connectivity.
    what can i do?

    Hello Elmasorun,
    When you state you are losing connectivity, it sounds like a poor signal or interference.
    Please go through the steps in this article for troubleshooting calls.
    If you can't make or receive calls on your iPhone - Apple Support
    Thank you for using Apple Support Communities.
    Nubz

  • Iphone 3Gs won't sync music, photo's etc after updating to iOS 5.1. Need help!

    I recently updated my iOS on my Iphone 3Gs and it won't sync any of my music or photo's. I'm extremely frustrated and annoyed that I can't put any of my music or photo's onto my Iphone as the new iOS (5.1) won't sync.
    I've done everything I can think of. I've done everything people have said that would work for them from the internet and nothing has worked. I need help!

    This should be helpful.
    http://www.youtube.com/watch?v=wAYuBNBjo3I
    I had the same problem on my iphone4, and it worked!

Maybe you are looking for

  • How do I stop iTunes from copying my music to the iTunes music file?

    We have an Intel iMac running Tiger with a 146 GB hard drive, so imagine my shock when I discovered that we only had 2gb of space left! We are a family and have 5 users with 5 different iTunes libraries on each of our log ins. So I made a Shared Musi

  • [SOLVED]Removing gnome 3.x now that cinnamon 2.x no longer requires it

    I've had gnome and cinnamon on my system for a while but am no longer really using gnome. From cinnamon 2.0, there are various reports that cinnamon is independent of gnome (although I think it still depends on some other gnome-* packages). I'm tryin

  • Question about Classes

    I have a question concerning classes. In my main program I have a list box. I have gotten the index (using getSelectedIdex method) from the list box to use with my array. What I want to do is match the list box index with the array index to get the c

  • System Keychain Empty

    So this afternoon my system keychain was automatically replaced with a new one somehow. In /libray/keychains there is the new one "system.keychain" and the one that I have used forever "system.keychain.2010-04-23.13/06/52". Why the **** did the syste

  • Requirements for file to multi file scenario

    Hi, Please tell me what are the System Requirements(of XI System) for running of file to multi-file scenarios. Also are there more requirements for some other similar scanarios.