IPhone 4S has no signal bars but shows the network carriers name and the 3G icon but just doesn't have no siganl bars
Hi my iPhone 4S has no signal bars but shows the network carriers name and the 3G icon but just doesn't have no siganl bars but it was working fine till today then all of a sudden lost signal what do i do any help much appreciated
I've been experiencing with the same problem lately. Have you tried getting a new sim card?
With the new sim it seems to work well for a few days and then it goes back to the same problem. The warranty on my phone just ended about a month ago, and I've never dropped it and no water damage either. When I do a erase all and reset, it seems to work for a few days again and comes back to the same issue. I've deleted all my apps and been using the phone just as a phone and txting device. New IOS update doesn't seem to change this issue either. I've been getting by with doing a network reset and turning it off and on a few times a day.
Anyone have any solution? Much appreciated!
Similar Messages
-
What does it mean when I click on my wifi name and it show I'm on my wifi, but the network keeps thinking and the ipad says, Safari cannot open this page because it is not connected to the internet. ?
When you click on the WiFi network name, have you also provided the password for accessing the network? You should get a dialogue box asking you for the security information the first time you connect.
If you are not able to connect, you might want to go to Settings > General > Reset > Reset network settings.
Then go back to Settings > WiFi and select your network name again and make sure the security information is now entered correctly.
If you still cannot connect, power down the router, wait a few minutes, power up the router, with the iPad powered down the whole time, and after the router has had several minutes to stabilize power up the iPad. See if it now connects correctly. -
i just change my carrier from Maxis to Celcom, however the carrier name on my home screen keep changing to my previous carrier which is Maxis. I aready reset the network setting but it still happened.
Yes, i put the new sim for the new carrier.
-
Table that has the hier text names and the corresponding hier ID
Hi,
Would anyone happen to know the table that has the hier name text as it appears from the infoObject level and the corresponding Internal hierarchy ID (unique ID) for data element RSHIEID. I would want ot be bale to match the text name o f the hier to the hier ID.
Thanks
WillTrying to make it simpler taking the 0material hierarchy note that the 0material has been loaded with 3 different hierarchies:
fields in the H table:
HIEID - 434FLR9O6DX0XXJS3CLIYZODD (Refers to the particular hierarchy as mentioned I have 3 hierarchies loaded to 0Material)
OBJVERS - Active and so on
NODEID - 4 digit internal number of the hierarchy
These are the Keys that identifies the hierarchy uniquely in my case the 1st hierarchy.
Now if you want to find the nodes then based on the example above I will take the hierarchy id ie 434FLR9O6DX0XXJS3CLIYZODD for the field HIEID that would give me all the nodes of this hierarchy
Note: the HIEID for a particular hierarchy can be found from the HEADER info
Thanks,
Raj -
When iBooks has a problem connecting to a wifi network, it hangs and the page goes blank
i use the books I have in iBooks as study aids, a lot. I find that when I am in the vicinity of a new or busy wifi network that the page or bookshelf just goes blank, I have to switch wifi off and restart the app, then it works again. It is most annoying though.
Reboot router, make sure it's up to date. If on wifi try ethernet. Make sure DNS is set to automatic (settings - general - network).
-
My iphone 5s has no signal. I already tried the reset. but no change. I bought it less than 2 months. What can I do?
I will. thanks
-
My iphone 4s has no signal in my house where I always have a good signal
My iphone 4s has no signal in my house where I always have a strong signal. I have tried the usual stuff turning it off and back on again, holding both buttons at same time.
"Always have a stong signal" with what? An iPhone? With a computer?
We don't have house wifi but we do subscribe to a citywide service. Theoretically it can carry 2 blocks. With the 4S we pretty much have to stand under an antenna to pick it up. We have been able to see one on a post a block away but the iPhone could not. Basically I think you need a really strong signal. -
My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?
I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry. -
My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.
The problem would seem to be in the firewall in your router. Have you tried disabling it? I assume you've updated the router firmware, right? Consider bypassing the ISP provided router (using it as a modem only) and unsing another device such as an Aiport Express.
-
iphone 4 will not charge but when i hold power button it the batt comes on and the plug and the lighning bolt shows up. i tried different chargers wall and computer and tried soft reset, the phone died on its own it was jailbroken. but with the batt sing and the plug with the lightning bolt tells me the batt is still vholding charge.
Hello!
i know a place where they can look at your phone. It's call DoctorApple. i went there to repair my phone. this is their phone number : 514 234-2851 -
When I sign in to my Apple ID in "My Apple ID" and go to "Passwod and Security" I should answer the security questions but I don't remeber them and the bar that says "send to rescue email" doesn't show !! How could I recover the questions??
You will have to contact iTunes Support and tell them you have forgotten your Security Questions and need them reset. They will respond to you by email, usually within 24 hours. Here are two links to contact iTunes Support:
http://www.apple.com/support/itunes/ww/
or by email:
http://www.apple.com/emea/support/itunes/contact.html
Cheers,
GB -
an iphone update has wiped all my puchased songs, i can see them in my purchased history but they are missing from my iphone and when i log into itunes on my pc, how do i retrieve them?
Restore from previous backup, be sure use the same iTunes and account you used to store your stuff into your device.
-
But when received, the image is invalid, and the mail states that the message has no content. Help, please!
Hello Bunk94,
It sounds like iMessage may be activated with the wrong phone number. Let’s see if we can resolve this. First, go ahead and sign out of iMessage and FaceTime:
If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT204065
Sign out and back in to iMessage and FaceTime
Go to Settings > Messages > Send & Receive, tap your Apple ID, then tap Sign Out.
Go to Settings > FaceTime, tap your Apple ID, then tap Sign Out.
Afterwards, turn iMessage and FaceTime off and restart your device:
If you get an error when trying to activate iMessage or FaceTime - Apple Support
http://support.apple.com/en-us/HT201422
Turn off iMessage and FaceTime and restart
Go to Settings > Messages and turn off iMessage.
Go to Settings > FaceTime and turn off FaceTime.
Restart your device.
Turn iMessage and FaceTime back on.
Thanks,
Matt M. -
I just changed my user name to my e-mail address on my iMac. It works fine there but when I try to use my iPhone it still shows my old user name and will not let me enter??
There is no user name needed to "enter" or use iPhones...
Assuming you mean your iTunes Store account ID:
Settings > Store > tap ID > sign out > sign in with new ID -
I have an iPhone 3Gs and it has froze on the apple logo. I have held the on/off button and the home button together but the apple logo keeps reappearing. What Can I Do?
Try plugging it into your computer, see if that clears it up or if you can perform a restore from your latest backup.
Maybe you are looking for
-
How to open a report in a new window using RWWebServiceProxi????
Which? First and foremost a greeting to all, here again bothering. I have an application in JDeveloper 10g and need to open a few reports designed in Oracle Reports 10g. Get jobId with RWWebServiceProxy and that works well. The league's report is gen
-
Hii I want to install GWPA in my eclipse. I have installed android sdk.But i am getting the following error , while installing GWPA I have used the following document for installing GWPA How to install Gateway Productivity Accelerator (GWPA) plugin
-
How can i load and view my McAfee Encrypted USB with a private partition?
I have an encrypted McAfee USB that I use at work on a windows computer. I need to be able to access it at home on my MacBook Pro. It allows me to login to the USB but the partition never come up. I have no idea how to fix this and really need some d
-
Change representation of array elements? (typecast?)
There must be a better way to convert an array of U16 (from an unflattened picture object I loaded from a BMP file) to a floating point array than what I've come up with: unwrapping the array, converting each element, then building a new array! I als
-
Flash error in AS3. Use a button to stop a sound.
Hi, I have the following code: import flash.net.URLRequest; import flash.media.Sound; import flash.media.SoundChannel; import flash.events.Event; import flash.events.MouseEvent; var ruta:URLRequest=new URLRequest("afternoonnaps.wav"); var sonido:Soun