IPhone 4s power failing within 3 hours with only 2 calls after charging overnight

My wifes iPhone power is failing within 3 hours of overnight charge, after only 2 calls and reading about 4 e-mails. My phone however works fine. Both are the same model 4s. Any ideas?

I have been getting 2 - 4 days use on my 4s after each of the 7.x upgrades.
I haven't had 7.0.3 for that long, but my phone now shows 14hr 55 min standby with 2 hrs usage and 76 percent battery left.

Similar Messages

  • My iPhone 4S has no sound on alerts, music, only on calls and SMS, this happened after upgrading to IOS7. Can anyone help me solve this problem?

    My iPhone 4S has no sound on alerts, music, only on calls and SMS, this happened after upgrading to IOS7. Can anyone help me solve this problem?

    check and make sure that an alert style has been choosen for certain alerts, and make sure you check your sounds in settings

  • I have had my iPhone about 1 1/2 years...with no problems. About 2 days ago my battery drained within an hour, I plugged it in to charge and it heated up so hot the temperature warning popped up on the screen. The phone will not hold a charge now.

    I have had my iPhone 4 for about 1 1/2 years, with no problems. A couple days ago the battery drained in about an hour, I plugged it in to charge and it was not charging. After a few hours a message popped up on the screen about the temperature being too hot...the phone was very hot when I picked it up. The battery will not hold a charge and it heats up every time I plug it in. Suggestions???

    Make an appointment at the genius bar. An out of warranty replacement is $149.  It sounds like it may have gotten wet.

  • I have a iPhone 4s, which has been working fine until now. Charge phone overnight and within 2 hours dead. Put it on charger and shows charging but that's it. Battery not showing any charge.

    I have a IPhone 4s, which has been working great until now. Don't know if has any thing to do with the latest updates. Charged it over night and then two hours later it was dead. Didn't even used it. Placed on charger and the charging icon shows but battery not.

    Hello, M_Bilal
    Welcome to the HP Forums.
    That you for provided such a detailed post with what you've already completed, for the issue with your battery. I will try to guide you further.
    I would like to provide you further documents for troubleshooting, but you've essentially completed what I have for this issue. The only step left, would be to test the battery.
    You can do this with another battery, or in another notebook. I know you mention another machine, but if you know someone who does or someone who has a compatible battery. This would test that. You could even see if a local computer shop could test it.
    The reason for this, is if the battery is the problem, it's much easier and more affordable replacement. Also, you mention it being new, might have warranty.
    The other possible cause to the issue you've touched on, that would be the system board. Testing the above, would just confirm if this is the problem or not. From there you could decide on what you'd like to do.
    I know, there really aren't many suggestions here, but I hope this can provide you with the next step.
    Let me know how things go, with the route you choose to troubleshoot.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Is it normal for iPhone 5 to take about 4 hours and 15 minutes to completely charge from 0%?

    My iPhone 5 takes just over 4 hours to completely charge from a complete battery drain. I am very curious as to whether or not this is normal or abnormal? My previous device was the Droid Razr Maxx HD which took about 2 hours to completely charge. Am I stressing over nothing?

    From the horse's mouth: http://www.apple.com/batteries/
    "Most lithium-ion polymer batteries use a fast charge to charge your device to 80% battery capacity, then switch to trickle charging. That’s about two hours of charge time to power an iPhone to 80% capacity, then another two hours to fully charge it, if you are not using the iPhone while charging. You can charge all lithium-ion batteries a large but finite number of times, as defined by charge cycle."

  • After charging overnight iPhone 4S (5.1), no cell nor wifi and only 97% battery

    Setup:
    - iPhone 4S
    - Unlocked
    - Rogers (Canada)
    - upgraded to 5.1 when it became available
    - good reception area, never had a dropped call
    Observation:
    - never had this happen before the update
    - now I have seen this twice already with exact same observation
    - before charging phone was fully functional and had 10%+ battery life left
    - charge overnight (min 6hrs) then
    - no cell connectivity
    - no wifi connectivity
    - just shows searching
    - battery indicator shows 97%
    - siwtching on and off airplane mode does not recover any cell nor wifi connectivuty
    - only after turning off phone completely and turnign it back on I regain connectivity and battery indicator shows 100%
    - I will try in the next few nights to recreate this problem but close all applications in the background though I cannot imagine that having to do with anything

    Stay on the 5.1.1 for now.

  • Double with only 2 number after point

    hi,
    I have a double with a few number after the poin, I need have only 2 number after the point...
    in past I have asked in this forum and receive a good answer...
    NumberFormat formatter = new DecimalFormat("00.00");
    String Average=formatter.format(Media1);
    Now the problem is that Average is a String while I need a double, exists a way to return a double rather than a String...
    thanks in advance...

    hi,
    I have a double with a few number after the poin, I
    need have only 2 number after the point...
    in past I have asked in this forum and receive a good
    answer...
    NumberFormat formatter = new DecimalFormat("00.00");
    String Average=formatter.format(Media1);
    Now the problem is that Average is a String while I
    need a double, exists a way to return a double rather
    than a String...
    thanks in advance...You are confusing a double's value with its representation. The representation (as a string of characters - digits, decimal point, and more digits) is what shows 2 decimal places. That is what DecimalFormat is for.

  • Why does Iphone 5 battery drain within 3 hours if it is not being used?

    My wife charged her Iphone over night and at 8am it was on 100%. She has had no calls or texts but at 11am it is on 4%. This has been going on since the ios 7 update. Any help would be great.

    The Ultimate Guide to Solving iOS Battery Drain
    <http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain>

  • It it bad to charge my ipod tough 4g over night for 7 hours with 70% reming befor i charge

    i got a ipod touch 4g 8bg and is it bad if i like to keep it the charger all day even with 100% and play on it for a hour can i over charge the battery and ruin it or is their a block on my ipod to stop charge at 100%

    thank you so much for the info and when i play games on my ipod should i turn down my brightness to about 50% pr 40% so it dont over heat it has not happened yet but i wunna make sure it doas not happen im new to the ipod softwere

  • I have had trouble with my iphone 4 since latest update. It will not turn on after charging.

    I am having trouble with my iPhone 4 since latest upgrade.  It will turn off during charge and can only be turned back on by restoring it with itunes.  Is there anything I can do to fix this problem?

    sadly most likely u have to buy a new battery unless u didint update ur ios cause people on ios 4 are having problems like that

  • I downloaded entunes for my new toyota prius. my itunes account will not allow it to sync to my iphone because it is authorized to share with only one computer. How do I change this? I cannot access it in my car without it being on my phone as an app

    I really do not know how to work computers well and would appreciate any help you can offer. I tried to find it on itunes help, that didn't help either, I couldn't figure out how to use it properly. Thanks.

    What iPhone do you have? You can check in settings>>general>> about.
    If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
    If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears.

  • Help! iPhone 5 restarting by itself! Battery level won't change after charging.

    HELP!
    I have a 3 month old iPhone 5 that was recently updated to iOS 7. After a few days of use, I noticed after a night of charging, which I always do, the battery level indicator and percentage did not change. Next, in my carpool ride in to work, when using the iPhone, randomly the screen would freeze, then turn a random color and would shut off and restart.
    Then all of a sudden it was fine, no issues.
    Then today, the same thing is happening. The battery level, freezing/color changing on the screenscreen/restarting issues are back.
    I don't know whats going on. Never had an issue with any of 3 past my iPhones.
    Thanks in advance,
    Josh   

    I'm sorry, it seems that the problem is that my phone WON'T restore. I just tried restoring again and it keeps giving me the 2001 error. Help.

  • Cisco IP phones with only incoming calls not outgoing calls

    The problem in one of our client place where we implemented the Cisco IPT using Cisco Callmanager 4.1 running on MCS 7800 server with the IP phones being used over there are 7940G, 7912G. is that sometimes the phones are unable to call outside but they can receive calls from outside. When on the Cisco CallManager Administration web console reset the gateway (by going to Devices> Gateway, then check the box next to the gateway and click reset) the outgoing calls can be performed again.
    Where will the problem be either in callmanager or the voice gateway router 1760?
    Please let us know the solutions to this issues asap.
    Thanks
    swamy

    I would check the IOS version you are running, first off, and use Bug Tool or downloads to see if there are VOIP issues with the Feature Set or Train you are using. I know from the past, I personally had MANY problems with the 1760 router platform and had to try several IOS Ts to find one that worked consistently. The other thing you ought to look at is whether it is an MGCP or H.323 gateway. I would suggest redeploying as an H.323, as it can be a bit more manageable. The difference is:
    MGCP => CallManager controls dial plan with Part / CSSs
    H.323 => the router control dial plan with dial peers in IOS
    HTH,

  • 18 mo old battery with only 83 cycles full charge = 64% ... what!

    The battery in my 18 month old late 2008 model MacBook (unibody) has had only 83 battery load cycles yet will only charge to 64% (2651 mAh vs 4100) at full charge.
    Needless to say, this is disappointing when the local Apple dealer tells me it should be fine to 300 cycles. As an Apple user since the late 1970s Ive been able to fix most of my problems on my own ... but doing all the usual battery fixes does nothing. The battery is crap.
    Very disappointed in Apple battery quality. No way I can pay $140 to replace what should be still fine. Ugh. And $49 for a tech support phone call, Apple. Come on.

    Very disappointed in Apple battery quality. No way I can pay $140 to replace what should be still fine. Ugh. And $49 for a tech support phone call, Apple. Come on.
    Relax. Technology's not perfect. You have regularly calibrated it, haven't you? Maybe you should have bought AppleCare...
    Oh, and Apple doesn't make the batteries.

  • IPhone 5 backup failed

    I tried several times to backup my iPhone 5 but failed.
    Several times it only run for 1 minute and told me 'the last backup could not be completed.'
    This morning, it run for almost 1hr and told me the same.
    The last backup still keeps in 2013.
    What should I do?
    I am sure I have enough space to backup!
    Please help.

    Delete the backup and try again.
    Computer iTunes > Preferences... (Windows: Edit > Preferences...) > Devices > mark your back and click Delete button.

Maybe you are looking for

  • Payment for app cannot complete with no reason

    payment for app cannot complete with no reason

  • How to reuse constant mapping in a project?

    Hi, I have a issue here. I have few constant values such as load_date (sysdate), load_by and few other columns. Currently i'm recreating this constant values in each mappings. How do I create a global constant which can be used as plug and map to my

  • RMDATIND uploading problem with external material numbers

    Hi, I'm using LSMW direct input program RMDATIND (Object:0020 Method:0000) for creating materials. I have a problem with uploading materials which have two types of external material numbers. For example one material number is 1111-333 and then we ha

  • Huge Problems with WD Mycloud... files disappearing...

    I recently installe done of these in a small clients office (they have 4 or 5 users) and wanted a simple storage device. I had used these before andf they loooked good so I bought one. It has been a huge embarrassment and I hope you can help me resol

  • How do I get transparency in my mesh gradient?

    I'm trying to create a simple mesh gradient that fades from white in the middle to transparent on the outside. But as soon as I touch any node of my transparent (just unfilled, not 0% opacity) shape with the mesh tool, the entire shape fills with 100