Iphone 4S size is great just improve its performance

why do apple phones needs to extend its size and forcing its thickness to be much more thin? instead of just improving its performance? I think iPhone 4S design size and thickness is the ideal size for apple handheld phones. people requesting for bigger screen that's why there's an iPad and iPad-mini to meet these demand instead of extending the size of iPhone and to be much more thinner. durability of today's iPhone is gone... even apple's legacy design has gone wrong nowadays because of its bigger size it needs enough space on my pocket.

Try restoring the iPhone to factory settings. If you are having difficult restoring, put the iPhone into Recovery Mode and see if that then works:
http://support.apple.com/kb/ht1808
If not, or if a restore to factory settings does not fix the problem, then your iPhone may have a hardware problem. You can only get the iPhone serviced by Apple in Canada, so you will have to take the iPhone there or send it to someone you know in Canada who can get the iPhone serviced and send it back to you. The only option for getting service in Pakistan would be to pay some unauthorized repair shop to attempt a repair, after which Apple will no longer provide any service even in Canada.
Regards.

Similar Messages

My 3-year-old iMac is turning sluggish. Is there an app to clean it up and improve its performance?

My comptuer, an iMac from almos 3 years ago, upgraded to the OSX 10.7.2 is turning very slow, and many application take forever to appear. A lot need to be forced to quit (even iCal and addressbook. Is there some software that can cick its act?

I'm convinced the culprits are hidden somewhere in Lion and icloud. My iMac (also around 3 years old) ran great on Leopard, but boy did things go to **** in a hand cart when I added Lion, and even more so when I added icloud. I now spend as much time each day waiting on the spinning ball to stop (if it ever does) and logging into icloud and waiting, waiting and waiting, ad naseaum. Strangely, icloud works pretty well when I access it on my PC. Force Quit is about the only thing that works most of the time now--and given all the practice it's getting, it should work well.

Suggestions required to change the query to improve its performance.

By using the following query I Created a View. If i query the view for the required data it is taking around 1 minute to fetch the data.
The output of the query gives all the time slots for which each seat is available on each day starting with the effective start date in the xxcgs_adm_seat_mst table
It ends with last CAL_DAY of the xxcgs_admin_calendar table.
The XXCGS_SEAT_MST table contains all the seats data and XXCGS_ADM_ALLOCATION table contains all the allocated seat data.
Tables used in this view
1)
CREATE TABLE XXCGS_ADM_ALLOCATION
SEAT_ID NUMBER,
ALLOCFROM_DATE DATE ,
ALLOCTO_DATE DATE ,
TIME_FROM VARCHAR2(11),
TIME_TO VARCHAR2(11));
The table is having the following sample data:
Insert into xxcgs_adm_allocation Values(1121, '12-DEC-2007', '27-12-2007', '00:00', '04:59');
Insert into xxcgs_adm_allocation Values(1140, '12-DEC-2007', '27-12-2007', '00:00', '04:59');
Insert into xxcgs_adm_allocation Values(1122, '12-DEC-2007', '27-12-2007', '04:30', '10:59');
Insert into xxcgs_adm_allocation Values(1054, '12-DEC-2007', '27-12-2007', '00:00', '04:59');
Insert into xxcgs_adm_allocation Values(1141, '12-DEC-2007', '27-12-2007', '00:00', '04:59');
Insert into xxcgs_adm_allocation values(1142, '12-DEC-2007', '27-12-2007', '00:00', '04:59');
Insert into xxcgs_adm_allocation Values(1120, '12-DEC-2007', '27-12-2007', '00:00', '04:59');
COMMIT;
2) CREATE TABLE XXCGS_ADM_SEAT_MST
SEAT_ID NUMBER,
EFFECTIVE_START DATE,
EFFECTIVE_END DATE);
Sample data:
Insert into xxcgs_adm_seat_mst Values (1053, '15-OCT-2007',NULL);
Insert into xxcgs_adm_seat_mst Values (1049, '15-OCT-2007',NULL);
Insert into xxcgs_adm_seat_mst Values (1054, '16-OCT-2007',NULL);
Insert into xxcgs_adm_seat_mst Values (1121, '12-DEC-2007',NULL);
Insert into xxcgs_adm_seat_mst Values (1120, '12-JAN-2007', NULL);
Insert into xxcgs_adm_seat_mst Values (1080, '11-DEC-2007',NULL);
Insert into xxcgs_adm_seat_mst Values (1100, '11-DEC-2007',NULL);
Insert into xxcgs_adm_seat_mst Values (1122, '01-DEC-2007',NULL);
Insert into xxcgs_adm_seat_mst Values (1140, '01-DEC-2007',NULL);
Insert into xxcgs_adm_seat_mst Values (1141, '01-DEC-2007',NULL);
Insert into xxcgs_adm_seat_mst Values (1142, '01-DEC-2007',NULL);
COMMIT;
3)
CREATE TABLE XXCGS_ADMIN_CALENDAR
CAL_DAY DATE,
SL_NO NUMBER
This table contains 3 years data.
In this table I inserted data with this code:
declare
v_cal_day DATE ;
V_SL_NO NUMBER;
BEGIN
V_CAL_DAY := '01-JAN-2007';
V_SL_NO := 1;
LOOP
INSERT INTO XXCGS_ADMIN_CALENDAR VALUES (V_CAL_DAY,V_SL_NO);
V_CAL_DAY := V_CAL_DAY+1;
V_SL_NO := V_SL_NO+1;
EXIT WHEN V_CAL_DAY > '31-DEC-2009';
END LOOP;
END;
4)
CREATE TABLE TIME_SLOTS
S_NO NUMBER(2),
HOURS VARCHAR2(6 BYTE),
FROM_TIME VARCHAR2(6 BYTE),
TO_TIME VARCHAR2(6 BYTE)
Data in this Table:
insert into time_slots values(1, '00:30', '00:00', '00:29');
insert into time_slots values(2, '01:00', '00:30', '00:59');
insert into time_slots values(3, '01:30', '01:00', '01:29');
insert into time_slots values(4, '02:00', '01:30', '01:59');
insert into time_slots values(5, '02:30', '02:00', '02:29');
insert into time_slots values(6, '03:00', '02:30', '02:59');
insert into time_slots values(7, '03:30', '03:00', '03:29');
insert into time_slots values(8, '04:00', '03:30', '03:59');
insert into time_slots values(9, '04:30', '04:00', '04:29');
insert into time_slots values(10, '05:00', '04:30', '04:59');
insert into time_slots values(11, '05:30', '05:00', '05:29');
insert into time_slots values(12, '06:00', '05:30', '05:59');
insert into time_slots values(13, '06:30', '06:00', '06:29');
insert into time_slots values(14, '07:00', '06:30', '06:59');
insert into time_slots values(15, '07:30', '07:00', '07:29');
insert into time_slots values(16, '08:00', '07:30', '07:59');
insert into time_slots values(17, '08:30', '08:00', '08:29');
insert into time_slots values(18, '09:00', '08:30', '08:59');
insert into time_slots values(19, '09:30', '09:00', '09:29');
insert into time_slots values(20, '10:00', '09:30', '09:59');
insert into time_slots values(21, '10:30', '10:00', '10:29');
insert into time_slots values(22, '11:00', '10:30', '10:59');
insert into time_slots values(23, '11:30', '11:00', '11:29');
insert into time_slots values(24, '12:00', '11:30', '11:59');
insert into time_slots values(25, '12:30', '12:00', '12:29');
insert into time_slots values(26, '13:00', '12:30', '12:59');
insert into time_slots values(27, '13:30', '13:00', '13:29');
insert into time_slots values(28, '14:00', '13:30', '13:59');
insert into time_slots values(29, '14:30', '14:00', '14:29');
insert into time_slots values(30, '15:00', '14:30', '14:59');
insert into time_slots values(31, '15:30', '15:00', '15:29');
insert into time_slots values(32, '16:00', '15:30', '15:59');
insert into time_slots values(33, '16:30', '16:00', '16:29');
insert into time_slots values(34, '17:00', '16:30', '16:59');
insert into time_slots values(35, '17:30', '17:00', '17:29');
insert into time_slots values(36, '18:00', '17:30', '17:59');
insert into time_slots values(37, '18:30', '18:00', '18:29');
insert into time_slots values(38, '19:00', '18:30', '18:59');
insert into time_slots values(39, '19:30', '19:00', '19:29');
insert into time_slots values(40, '20:00', '19:30', '19:59');
insert into time_slots values(41, '20:30', '20:00', '20:29');
insert into time_slots values(42, '21:00', '20:30', '20:59');
insert into time_slots values(43, '21:30', '21:00', '21:29');
insert into time_slots values(44, '22:00', '21:30', '21:59');
insert into time_slots values(45, '22:30', '22:00', '22:29');
insert into time_slots values(46, '23:00', '22:30', '22:59');
insert into time_slots values(47, '23:30', '23:00', '23:29');
insert into time_slots values(48, '24:00', '23:30', '23:59');
commit;
The query
Part 1:
This Query maps the seat_id in the master table with each time slot and with effective start date between sysdate-60 and sysdate+365 assuming that a seat can be allocated not more than a year. so if there are 10 seats in this table then this table contains 10*48*425 records
SELECT mst.seat_id
, cal.sl_no
, cal.cal_day
, tm.s_no
, tm.from_time
, tm.to_time
FROM xxcgs_adm_seat_mst mst
, xxcgs_admin_calendar cal
, time_slots tm
WHERE cal.cal_day >= NVL (mst.effective_start,SYSDATE - 60)
AND cal.cal_day <= NVL (mst.effective_end, SYSDATE + 365)
Part 2:
This query is based on the allocation table and it checks the allocated seats with all the time slots and between the allocated date range and marks the timeslot as 0 if it is not allocated and 1 if it is allocated
SELECT seat_id
, sl_no
, cal_day
, s_no
, from_time
, to_time
FROM
(SELECT alloc.seat_id
     , cal.sl_no
     , cal.cal_day
, tm.s_no
, tm.from_time
     , tm.to_time
,SUM(DECODE(LEAST(alloc.time_from,tm.from_time),alloc.time_from,
          DECODE(GREATESTalloc.time_to,tm.to_time),alloc.time_to, 1,0),0))AVAILABILITY
FROM
xxcgs_adm_allocation alloc
,xxcgs_admin_calendar cal
     ,time_slots tm
WHERE
cal.cal_day >= alloc.allocfrom_date
AND cal.cal_day <= alloc.allocto_date
GROUP BY alloc.seat_id
,cal.sl_no
          ,cal.cal_day
          ,tm.s_no
          ,tm.from_time
          ,tm.to_time
ORDER BY cal.sl_no, tm.s_no) a
WHERE a.AVAILABILITY = 1
Part 3:
Here i am substracting the 2nd query output from the 1st to get all the available time slots for all seats
SELECT mst.seat_id
,cal.sl_no
     ,cal.cal_day
     ,tm.s_no
     ,tm.from_time
     ,tm.to_time
     FROM xxcgs_adm_seat_mst mst
     ,xxcgs_admin_calendar cal
     ,time_slots tm
WHERE cal.cal_day >= NVL (mst.effective_start,SYSDATE - 60)
AND cal.cal_day <= NVL (mst.effective_end, SYSDATE + 365)
MINUS
SELECT seat_id
, sl_no
     , cal_day
     , s_no
     , from_time
     , to_time
FROM
(SELECT alloc.seat_id
     ,cal.sl_no
               ,cal.cal_day, tm.s_no
               ,tm.from_time
               ,tm.to_time
               ,SUM(DECODE(LEAST(alloc.time_from,tm.from_time),alloc.time_from,
               DECODE(GREATEST(alloc.time_to,tm.to_time),alloc.time_to, 1,0),0))AVAILABILITY
FROM
xxcgs_adm_allocation alloc
,xxcgs_admin_calendar cal
     ,time_slots tm
WHERE
cal.cal_day >= alloc.allocfrom_date
AND cal.cal_day <= alloc.allocto_date
GROUP BY alloc.seat_id
,cal.sl_no
          ,cal.cal_day
          ,tm.s_no
          ,tm.from_time
          ,tm.to_time
ORDER BY cal.sl_no, tm.s_no) a
WHERE a.AVAILABILITY = 1

Any chance to get your Oracle version, release and patchset ? Any chance to get your OS and plateform ? Any chance to use tags [pre] and [/pre] around your code to keep tabs as well on the forum side ?
Any chance to get explain plan as well explained When your query takes too long ... ?
Nicolas.

How to improve the performance of the Data Migration program ?

Hi All,
I have written a program for Data Migration of Opportunities, but it is taking a lot of time to create or update opportunities.
I have used so many function modules like
" 'CONVERSION_EXIT_ALPHA_INPUT' " -- 8 TIMES
"GUID_CREATE'" -- 4 TIMES
"CRM_ORDER_READ" -- 1 TIME
"CONVERT_INTO_TIMESTAMP" -- 4 TIMES
"CRM_ORDER_MAINTAIN" --- 1 TIME
"CRM_ORDERADM_H_CHANGE_OW" - 1 TIME
"'BAPI_BUSPROCESSND_SAVE" -- 1 TIME
"BAPI_TRANSACTION_COMMIT" -- 1 TIME
"BAPI_BUSPROCESSND_CREATEMULTI" OR "BAPI_BUSPROCESSND_CHANGEMULTI"
and all these function modules are for every record in a loop. for 1000 records it is taking 75 min approximately. How i can improve its performance ?

Hi Raman,
For Performance improvment do the following things:
First Remove the CRM_ORDER_READ and use the tables to get the data and then use Read Statement on Internal Tables.
Second, Instead of BAPI_BUSPROCESSND_CREATEMULTI use BAPI_OPPORTUNITY_CREATEMULTI and then use BAPI_TRANSACTION_COMMIT. No need to use 'BAPI_BUSPROCESSND_SAVE.
Third thing, Not sure why you are creating guid 4 times, No need to generate guid if you use BAPI_OPPORTUNITY_CREATEMULTI. Guid will get generated.
Fourth, instead of using 'CONVERSION_EXIT_ALPHA_INPUT' multiple times, create a variable of req. length and then pass the values.
Hope this helps.

Improving the performance of this query

Hi, Do you see any change we could do on this to improve its performance, pls, I appreciate you taking few minutes to help with analysing and tuining it
select hoc.hoc_id,
hoc.mstr_key_id,
address.DISP_NME,
blck.st_blck_id,
blck.mstr_key_id as blck_mstr_key,
bldg.BLDG_ID,
hoc.BLDG_KEY_ID,
address.OCPD_IND,
address.TP_TYPE_CDE,
'' as cmbcNumber,
'' as tpSiteNumber,
case
when address.cmbc_id is not null then amsowner.ams_038_direct_connect.GetMobilierForCMB(address.cmbc_id)
when address.lbc_id is not null and address.cmbc_id is null then amsowner.ams_038_direct_connect.GetMobilierForLBC(address.lbc_id)
END as Mobilier,
choice.cnsmr_chce_ind,
hoc.SRT_IND,
hoc.DLVRY_IND,
case valRES_STAT_CDE
when 123444 then hoc.cse_sprtn_wdth
when 123555 then hoc_pend.cse_sprtn_wdth
when 123666 then hoc_pend.cse_sprtn_wdth
end as cse_sprtn_wdth,
case valRES_STAT_CDE
when 123444 then hoc.admail_color_id
when 123555 then hoc.admail_color_id
when 123666 then hoc_pend.admail_color_id
end as admail_color_id,
case valRES_STAT_CDE
when 123444 then hoc.tieout
when 123555 then hoc_pend.tieout
when 123666 then hoc_pend.tieout
end as tieout,
hoc.callr_Ind,
hoc.PCKUP_ind,
case
when hldout.hld_out_id > 0 then 33
else 34
end as HLDOUT_IND,
case valRES_STAT_CDE
when 123444 then hoc.BREAKER_CARD_NUM
when 123555 then hoc_pend.BREAKER_CARD_NUM
when 123666 then hoc_pend.BREAKER_CARD_NUM
end as BREAKER_CARD_IND,
Case
when valRES_STAT_CDE = 123444 and hoc.MP_ID is not null and hoc.MP_ID <> 0 then 33
when valRES_STAT_CDE = 123555 and hoc_pend.MP_ID is not null and hoc_pend.MP_ID <> 0 then 33
when valRES_STAT_CDE = 123666 and hoc_pend.MP_ID is not null and hoc_pend.MP_ID <> 0 then 33
else 34 END as MP_IND,
case
when valRES_STAT_CDE = 123444 then hoc.LCRMS_SEQ_NUM
when valRES_STAT_CDE = 123555 then hoc_pend.DEL_SEQ
when valRES_STAT_CDE = 123666 then hoc_pend.DEL_SEQ
END as DEL_SEQ,
case
when (hoc_type_cde = 154 and hoc.MP_ID is not null ) then (NVL(mp.SLCLRES_RATE , 0)+ NVL(mp.OSSDRES_RATE,0))
when (hoc_type_cde = 154 and hoc.MP_ID is null ) then (NVL(asmt.SLCLRES_RATE , 0)+ NVL(asmt.OSSDRES_RATE,0))
when (hoc_type_cde = 156 and hoc.MP_ID is not null )then (NVL(mp.SLCLCOM_RATE,0) + NVL(mp.OSSDCOM_RATE,0))
when (hoc_type_cde = 156 and hoc.MP_ID is null ) then (NVL(asmt.SLCLCOM_RATE,0) + NVL(asmt.OSSDCOM_RATE,0))
else 0
END As AvgMail,
Case
when valRES_STAT_CDE = 123444 then hoc.drct_ind
when valRES_STAT_CDE = 123555 then hoc_pend.drct_ind
when valRES_STAT_CDE = 123666 then hoc_pend.drct_ind
END as drct_ind,
Case
when pc.ldu_type_cde in (492, 564, 565, 566, 567 ) then 33
else 34
end as lvr_ind,
hoc.A12_CARD_IND,
hoc.DNC_CARD_IND,
hoc.CARD_IND,
hoc.FRCE_CARD_IND,
hoc.EXTRA_CARD_NBR,
hoc.TTL_HOC_CNT,
--(select BSNS_NME_EN from occupant where occupant.ADDR_MAIL_ID = address.addr_id and occupant.prmry_ind = 33 and rownum <= 1 )as PRIMARY_BUS_NME_EN,
--(select BSNS_NME_FR from occupant where occupant.ADDR_MAIL_ID = address.addr_id and occupant.prmry_ind = 33 and rownum <= 1 )as PRIMARY_BUS_NME_FR,
blck.blck_seq,
address.ADDR_NUM,
address.ADDR_SFX_CDE,
address.ADDR_STE_NUM,
hoc.HOC_TYPE_CDE,
hoc.CSE_SPRTN_GRP_ID,
pc.pc_id As pc_id,
pc.disp_nme as pc_disp_nme,
hoc.bag_ind,
hoc.CASETAG,
occupant.BSNS_NME_EN as PRIMARY_BUS_NME_EN , occupant.BSNS_NME_FR as PRIMARY_BUS_NME_FR
from amsowner.AMS_038_HOC hoc
left join amsowner.ams_038_hoc_pndng hoc_pend
on hoc.MSTR_KEY_ID = hoc_pend.MSTR_KEY_ID
inner join amsowner.AMS_038_ST_BlCK blck
on hoc.st_blck_key_id = blck.mstr_key_id
inner join amsowner.postal_code pc
on blck.pc_id = pc.pc_id
left join amsowner.AMS_038_bldg bldg
on hoc.BLDG_KEY_ID = bldg.MSTR_KEY_ID
inner join amsowner.address address
on address.addr_id = hoc.addr_mail_id
inner join amsowner.addr_lctn_to_mail locToMail
on locToMail.addr_mail_id = address.addr_id
inner join amsowner.addr_chce choice
on choice.addr_id = locToMail.addr_lctn_id
left join occupant on (occupant.ADDR_MAIL_ID = address.addr_id and occupant.prmry_ind = 33)
left join amsowner.ams_038_hld_out hldout
on (hldout.mstr_key_id = hoc.mstr_key_id and hldout.end_dte is null)
left join amsowner.ams_038_dm dm
on dm.dm_id = blck.dm_id
left join ams_038_assmt asmt
on blck.pc_id = asmt.pc_id and asmt.dpt_cde_nme = valDpt_cde_nme and ((asmt.case_type_cde = 1220 and dm.a62_cse_ind = 33) or (asmt.case_type_cde = 1219 and dm.a62_cse_ind = 34))
left join ams_038_mail_prfl mp
on hoc.mp_id = mp.mp_id and ((mp.case_type_cde = 1220 and dm.a62_cse_ind = 33) or (mp.case_type_cde = 1219 and dm.a62_cse_ind = 34))
where hoc.mstr_key_id = valMSTR_KEY_ID and blck.DPT_CDE_NME = valDpt_cde_nme and hoc.DPT_CDE_NME = valDpt_cde_nme and blck.RSTRCTR_STAT_CDE = restCode;
Thanks a lot :)

Hi and welcome to the forum.
I appreciate you taking few minutes to help with analysing and tuining itUnfortunatly it's not that simple.
We would need some more input here, like:
- database version
- optimizer settings
- execution plans
-etc..
Tuning is a complex matter, since many parameters come into play here.
If you want some useful responses then see:
[When your query takes too long...|http://forums.oracle.com/forums/thread.jspa?messageID=3299435]
[How to post a SQLStatement tuning request|http://forums.oracle.com/forums/thread.jspa?threadID=863295&tstart=0]
to understand what information would also be very useful to us (and, if needed, have your DBA participating in this as well).

In my iphone 5s music palyer is not opening its just blink and comes to the home screen.

in my iphone 5s music palyer is not opening its just blink and comes to the home screen.

What?

So apple just released its iphone 5 c and iphone 5s but will apple be releasing an ipod touch 6th generation this yr??

so apple just released its iphone 5 c and iphone 5s but will apple be releasing an ipod touch 6th generation this yr??

Apple has not said anything about that so no one on here would now. All we can do is wait and see.

My iphone calendar wont sync with my outlook calendar. My inbox seems to be syncing just fine, its just that my iphone calendar is not showing the same events i have in outlook.

my iphone calendar wont sync with my outlook calendar. My inbox seems to be syncing just fine, its just that my iphone calendar is not showing the same events i have in outlook.

Hi
I have the a similar problem - only I can't actually get the calendar to show up. I've added the account and it's showing Mail and Notes but not Calendar. But I'd like it to show the outlook calendar.
I'm going to
Go to settings > mail contacts calendar
select your account that's affected
But under that account there isn't a calendar showing and I can't see any options to add it?

I used Iphone sofeware edit one photo by cuting its size, however, when I connect with computer. The photo edited still was old photo, no any changed. I want to edit the photo, and cut the size of photo. What should I do now??

I used Iphone sofeware edit one photo by cuting its size, however, when I connect with computer. The photo edited still was old photo, no any changed. I want to edit the photo, and cut the size of photo. What should I do now??

I used Iphone sofeware edit one photo by cuting its size, however, when I connect with computer. The photo edited still was old photo, no any changed. I want to edit the photo, and cut the size of photo. What should I do now??

Does ios 7.1.1 improve battery performance ,also what is its effect on the speed of iphone 4s????

Does ios 7.1.1 improve battery performance ,also what is its effect on the speed of iphone 4s????
if it increase battery i want to know if it reduce the iphone speed ,as after ios 7.1 my iphone got more speed but the battery drainage increased

Tx modular, I mean by speed the general performance of iPhone which optimized after iOS 7.1 but I am afraid to update to iOS 7.1.1 not to lose this perfect performance but also I need battery life optimization

Okay so my friend just got an iPhone 4, and when i text her (i have an iPhone 5), and when she texts me its an iMessage, but when i text her, its a normal message... Any way to fix that? its really annoying

Okay so my friend just recently got the iphone 4 and I have the iphone 5. When she texts me its imessage, but when i text her it is a normal sms message.. I think ive tried everything at both ends... Any suggestions????? its driving me crazy

It is no wonder she is not receiving your messages if she has iMessage turned off in her iPad.
For her to receive iMessages on the iPad, she needs to turn iMessage ON in her iPad and then she needs to be connected to the internet in order to receive them. This connection can go through WiFi or through cellular data if her iPad has this functionality, but those two requirements are a must.
1. iMessages ON
2. iPad connected to Wifi or cellular data.

My Iphone 4 at random times, just wont send messages for around an hour even if i have full service, its always up to date so its not that but any help on what this could be?

My Iphone 4 at random times, just wont send messages for around an hour even if i have full service, its always up to date so its not that but any help on what this could be? It could just be my network being a pain in the *** but im not sure, help me out here people !

never had that problem or heard about it so my bet is a network issue

Can you tell me if it is possible to have an emergency no on the locked screen 0n the iphone it would be great because all phones are looked so if an emergency services requires to contact a close member of you family its there for them to see

Can you tell me if it is possible to have an emergency no on the locked screen of my iPhone it would be great f you can most phones are locked know so a contact no would be great and save time in an emergency

The application Stickies makes doing this (without the need for writing and picture-taking) exceptionally easy:
http://itunes.apple.com/us/app/sticky-notes-alarms-bump-sharing/id346224003?mt=8
There is an upgrade to a "pro" version but the free version will get the job done.

Is there a way to dial a contact by just typing its name in the keypad....as one can do in all the blackberry and android dialers...it is quite a job first to find the contact and then dial..

Is there a way to dial a contact by just typing its name in the keypad....as one can do in all the blackberry and android dialers...it is quite a job first to find the contact and then dial..

People - you critisize something you've no idea about! Smart dialing (also called T9) is NOT about text input for God's sake...it's about dialing a contact in a really quick and simple way just by clicking on one of 10 dial buttons (much bigger and easier to be tapped btw especially on the move) and the phone finds all the contacts matching typed combination
For example I want to dial contact MLADD - I then tap on 6,5,2,3,3 and the phone searches for contacts matching all the combinations hidden on these numbers.
Another example: see Apple's website containing contact line number specified in 2 ways: (800) MY-IPHONE (800-694-7466)
Do you get my point now?
I've used at least 6 different phones in my life so far and went through most of well known platforms including Symbian, Blackberry, Android, Windows Phone and now iOS. I'm very sure there is no better and faster way to quickly and easily dial somebody but by using a smart dial. Dialing somebody this way takes 2 seconds while dialing using tapping on contacts field, then typing a word using keyboard (assuming you click on a right button when on the move) takes a while longer and is frustrating.
It's just a matter of a wider perspective when looking at this problem. If you would use it at least once - you would demand it as well.
For people liking tapping everywhere to perform basic actions - let it be as it is, but why not to improve something by adding an additional option in setting and enable SmartDial?

Ipod touch wont turn on i tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.

my ipod touch wont turn on ive tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.

Try:
- Another cable
- Another USB port
- Reboot the computer
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Iphone 4S size is great just improve its performance

Similar Messages

Maybe you are looking for