Iphone 5 rotates between vertical and horizontal modes, but does not flip vertically.

New Iphone 5 rotates between vertical and horizontal modes, but does not flip vertically.
Tried restarting, checked the lock, gyroscope.

Hey Oprion,
Thanks for the question and congrats on your new iPhone 5c. The orientation of your iPhone will depend on the application you are using. For example, most of the built in applications only support the three main orientations (Horizontal, Vertical, Horizontal), whereas the Voice Memo’s application will operate “upside down” for easier access to the microphone.
Change the screen orientation - iPhone
http://help.apple.com/iphone/7/#/iph3badf94ec
Thanks,
Matt M.

Similar Messages

My new iPhone 4 will not play on the iHome iP1 Speaker System. I have removed the case and seated it properly and it charges, but does not play music. How can I get it to work?

My new iPhone 4 will not play on the iHome iP1 Speaker System. I have removed the case and seated it properly and it charges, but does not play music. How can I get it to work?

Hi there Graham!
I have a couple of articles that can help you troubleshoot this issue. First, if you are downloading HD content, you will need to know the system requirements for HD playback, which can be found here:
iTunes: Purchasing and viewing HD videos
http://support.apple.com/kb/ht3209
Next, you will want to check your video playback settings on your Windows machine. The steps for that can be found right here:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Hope that helps. Thanks for using the Apple Support Communities!
Cheers,
Braden

HT201210 while up-grading the IOS 6 to my iphone, the up-grade stop and now my screen does not stop to sart (apple) than shut down than restart (apple scree,) than shut down again

while up-grading the IOS 6 to my iphone, the up-grade stop and now my screen does not stop to sart (apple) than shut down than restart (apple scree,) than shut down again

If restoring the phone as new did not solve your problem, you'll need to bring the phone to Apple for evaluation.

Hello ... I brought my iphone 4 of panama and comes with the sim small, I live in Colombia. and the court but does not recognize it yet ... q in the company will give me a sim tigo that size to see if it works. I was told it comes with open bands ...

hello ... I brought my iphone 4 of panama and comes with the sim small, I live in Colombia. and the court but does not recognize it yet ... q in the company will give me a sim tigo that size to see if it works. I was told it comes with open bands ...

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

When the apple review team review our app,they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently.but in fact,when the app in background ,the app need data update to make the

when the apple review team review our app，they point out that our app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of trajectory replay come ture。in fact， we have added function when the app is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
the blow is the content of the review team email：
We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
"Continued use of GPS running in the background can dramatically decrease battery life."
Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
- complete details of your rejection issue(s)
- screenshots
- steps to reproduce the issue(s)
- symbolicated crash logs - if your issue results in a crash log
If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.

Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.

Issue is with OpenGL. System Info it allows Normal Mode but does not allow Advanced Mode.

Problems with Repousse 3D feature in Photoshop CS5 Extended
I am trying to use the Repousse 3D feature in Photoshop CS5 Extended and have been unable to figure how I can get it to be an option using text. Can you explain how I do this, please?
I have also tried rasterizing the text first and that does not work. I have tried placing the image and them loading the selection and I still do not have the option of Repousse.
I believe the issue is with my OpenGL. In the System Info it allows Normal Mode but does not allow Advanced Mode. I spoke with the "Geek Squad" who advised that this is not an issue with my Mac but has something to do with the software.
Can someone please help me fix this? Thanks.

If you really want help you may have to provide relevant information about your OS, GPU, its VRAM …

Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

My computer suddenly decides not to work and turns on but does not go past the grey apple screen with the loading wheel.. it will not go to my desktop. What should i do?

can somebody please help me fix this issue, i have been sitting at my computer all last night and this morning trying to figure it out. It could be the hardrive or anything really i just need to get it working. Alot of important things that need to be done using this computer and i am freaking out.
My computer suddenly decides not to work and turns on but does not go past the grey apple screen with the loading wheel.. it will not go to my desktop. What should i do?

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
Or if you are running 10.7 Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 partition.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

My camera works with the photobooth and with skype but does not work with online applications such as "lolcam from facebook" or "faceonthehole" application. Please help

My camera works with the photobooth and with skype but does not work with other applications like the "lolcam" from facebook or the " faceonthe hole" application. Can anyone help?

There was a issue with school computers being used to spy on kids in their bedrooms, Mac's were involved.
So Apple most likely tightened the API's to only select, trustworthy companies as not to abuse the web cam access priviledge.
If you want to use a web cam with these other programs and services, you'll likely have to buy a third party USB one, so you can manually disconnect it.
There isn't a way to physcially disconnect the built in web cam on Mac's without busting open the machine.

Carrier issues, Iphone 3gs: Carrier is in the carrier list but does not connect = no service

Right introduction, I live in the country signal for iphones under 02 in my area is 3-4 bars of GPRS signal. This is plenty to make and receive calls, texts and all that as use home wifi for internet simple. Everything working fine for about a year of having the phone, then did updates and started to see the "no service" almost all the time and had to place my iphone in a signal spot just to get 1-2 bars and couldn't touch it without dropping out! Basically I could not use it at all and the crap about the signal now showing true signal is rubbish as before i could make calls fine and no drops, but now due to "no service" i can't make any calls or texts or anything. I have a ipod touch when nothing HAS CHANGED other than i can think when the update to 4.0 came along! I have been living with this for almost a year. I have done every possible solution, apple stores, 02 stores, new sim cards (many), every type of phone resetting possible, manually turning off 3g and other settings to turning everything off bar just basic GPRS signal. Network resets everything possible no joy what so ever.
I have been paying for a year now for a phone that i can't use anywhere other than right next to a signal tower! Yes the phone connects to GPRS, EDGE, 3G when in town but just about. Before these problems i could get max 3G signal in my local town no issues but now struggle to get 1 bar of 3g in a town as well. The problem is I used to be able to use my phone as a phone where i needed to use the phone. Now i can't use the phone anywhere and get drop calls all the time when i do manage to get signal!!!!!!!
Now i can't even connect to 02, yet at home under a manual carrier search all UK networks appear on the list including 02, I click on 02 and it comes up with the warning "network lost see settings" So my phone CAN find signal but does not connect to 02. This has been the case for a long time now and as stated before several sim cards latter and plenty of trips to apple and changes of phone make NO difference which makes me believe this is a software issue on apple's part. I only started getting these issues when the iphone 4 came out and updated the ios. Now what can i do, i can not downgrade the ios as i never jailbreaked my phone so don't have the files stored that i should to be able downgrade. Apple are offering 0 help with this, all i want to do is smash it to bits as it no longer works as a phone. I have to use a 10 year old nokia to call and actually use my contract that I PAY FOR. I PAID FOR MY PHONE and just after the warranty runs out as well and it seems all a software problem.
I have searched all over the net to find no solutions to my problems this is a last resort before i do actually smash the thing and I love apple to bits but come on a simple software issue.
I mean isn't it silly that i can't downgrade my ios and that apple don't support this and yet my issue seems to lie in there update.
I know that the signal update reworked the algorithm to show true signal XXXXXXXXXXXXXXX um no it doesn't as now i have 0 signal as before i had no problems what so ever with dropping calls and the signal showing right so WHY WHY WHY.
Please help I am so frustrated with things and need to solve this issue. Please ask anymore questions if you want more details about anything, i need to sort this out please.
By the way i am running ios 4.3.3 yet bellow in the options this is not stated?? I have been updating hoping that it gets solved but only seems to get worse the more i update.
Thanks
James
Thanks
James

Same problems, unfortunatley I updated to 5.0 1 hour before going on holiday for three weeks and no way to restore my phone to try to remove it.At the same time, drop outs, range problems and the most annoying was my music and apps were corrupted and would not function properly :-(

Wireless All-in One receives scan and ink level but does not print

My wireless printer was working fine, now it can scan and send scan to my computer, my computer receives ink levels in the utility. Now it will not print from Word or other programs that I was able to print. When I restart the computer with a document in the printer queue, when it gets to my desktop screen, it prints. But still will not print from Word unless I do the restart again. I have restarted the printer(which works with other computers in the house) and even deleted and reloaded the HP program. My computer receives but does not print. I even tried direct usb connection

Hi raavindra,
Welcome to the HP Forums.
I see that you are having some issues when attempting to do a scan or a copy.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Inserting Images and Logos - works in the edit mode, but does not save nor show in final PDF format - help?

I have tried several times - but when I load a logo or image in to a form template - it shows up on the template in edit mode but when I save it for PDF final format and use - the image or logo disappears. What I am doing wrong?

Is this a form that you're creating in FormsCentral?

In Preview I rotate an image and save it, but when not when uploaded?

What's the screwey deal with Preview?
I open the image, rotate it, save it...but when I upload it to the internet, it remains in its original position.
Whats going on there?
Thanks for your help.
-ankitae

I can confirm this, but don't know why.
Jpeg's rotated with Preview don't display rotated when displayed in web browsers.
Jpeg's rotated with Preview do display up rotated when displayed with GraphicConverter
Jpeg's rotated with Graphic Converter show up rotated when displayed in web browsers.
For the short, quick fix, I'd suggest trying Graphic Converter... It usuall comes as part of the software package on your Mac.
Someone from the graphics world will be able to provide a better answer as to why, but I have no idea.

Elitebook works on battery and charges it - but does not start with it (only starting on AC)

Hey,
my 8460P only starts up when connected to AC power. Even with a fully charged battery it does not boot, i also have tested this with a replacement battery - but batteries are working on another Probook.
Strange: If I unplug the AC directly after powering ON, the 8460p continues running on battery.
What exactly happens:
I have fully charged battery and no AC connected. I press the power button, the CPU fan makes noise (full throttle), LEDs are glowing: Wireless, Power and HDD. The DVD drive is initializing... and then after 3 seconds device shuts down - BUT the power LED keeps glowing.
If I then press the Power button once again, nothing happens.
But when I connect the AC back, the SCROLL LED glows for about 3-4 seconds and then turns off.
What I did already: The well-known hard reset (disconnect everything, hitting power 30seconds): no success.
Latest BIOS is installed. Factory defaults loaded... nothing. Played around with different BIOS settings (everything which sounds for "power" or "AC" tried...) nothing.
This is not OS related - so updating any drivers or software does not make sense.
Further remarks:
Also from the sleep modes (hibernate or S3) it will not wake up from battery... again only when connected to AC!
Any solution/idea? please support.
Thanks a lot!
regards,
G

@gambrinus
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

RT target works OK in volatile mode but does not when deployed in non-volatile mode.

I have developed several applications using the NI cRIO-9073 Integrated chassis. The applications work perfectly well in volatile mode (development), but when I come to deploy the the RT target as an executable the application does not work. Now, I ran the LabVIEW Real-Time 1 Solution application and the same problem occured, in this case, the USER1 LED came on then went off as if an error occured. I finally trapped an error around the shutdown stage, attached, funny thing is though the error code doe not make sense as I am not using the FPGA, running in scan mode, however, I could be missing something.
(Note: I have obviously modified the Real-Time 1 course solution to use my existing hardware)
Now this is where it gets puzzling, 3 years ago I did the old RT course, LabVIEW Real-Time Application Development, I have now run the solution for this course, on the same target as the RT1 solution and it works!!!
I have contacted NI support with no solution to this problem. In the meatime I have a NI cRIO-9704 on order and when it arrives I will try again.
I really need to know, however what is going on here, does anyone out there have any Ideas? have you experienced any similar problems?
Thanks
Neil

Note to self - Include attachment...
Error Log
Status: TRUE
Code: -65589
Source: Shared Variable in Chamber Control.vi->RT Main.vi
This error or warning occurred while reading the following Shared Variable:
\\NI-cRIO9073-0180F3D1\Thermocouple Mod\Temperature-cRIO
\\localhost\Thermocouple Mod\Temperature-cRIO
Error -65589 occurred at an unidentified location
Possible reason(s):
CompactRIO: The FPGA VI you are running does not contain the DMA FIFOs that the RIO Scan Interface requires. Ensure that the modules under the Chassis item in the project match the modules in the chassis, and recompile the FPGA VI.

Iphone 5 rotates between vertical and horizontal modes, but does not flip vertically.

Similar Messages

Maybe you are looking for