Iphone 6 call quality issue....

Hi, yesterday i saw software update in my iphone 6 and i thought it will solve the call quality issue , but unfortunately it was not for that.
Dear iphone support , the call quality in iphone 6 is really bad, I was using iphone 4S and that had great voice quality. iphone 6 voice during call is not clear , it has noise .
When I told my friends about the problem , they told me that I might have bought the refurbish phone. But I bought it from Dubai in 750 USD and I do not think it would be the case.

Since my iPhone 6 has great Call Quality,
My tip would be to take it to an Apple shop. All apple Products have world wide warranty.
If it is really they should be able to fix it.
Hope this helps,

Similar Messages

  • Update fix call quality issue?

    Looking for feedback if the OTA update fixed the call quality issue.

    I contacted Motorola directly and asked. The rep informed me that the Kit Kat update did NOT address call quality concerns.
    Might there be another update available that does? (If so, the rep did not know of one.)  I LOVE the Moto X but bought the HTC One solely because of the call quality concerns of the Moto X.

  • IPhone 6 Call Quality Issues

    iPhone 6 64gb 8.0
    As of yet, I've not been able to make or receive a call without the other person sounding like they're three rooms away. I've turned up the volume on the side and within settings. I've turned the phone off and back on again.
    I backed up this phone from my last iPhone (5) so that I have all my personalization and files, etc. on it now. I also took the SIM card from my old phone and put it in my new phone.
    Everything else seems to work fairly well. It's just the call quality. I can hear what they're saying, They can hear me, but it seems like the volume is as low as it goes. But I know it's not.
    HELP!

    since I received my iPhone 6 Plus on Friday I've noticed that all of my phone calls have very bad audio quality.  i thought it was just when I was talking to someone in a car. But it doesn't matter where they are.
    WHat hat does it sound like:
    its like a crappy digitized vrry tinny sound. It's as if the ither person is talking on a radio.

  • IPhone 5S Call quality issues - Are they resolved?

    Hi folks,
    So long story short, I was previously a VZW customer with an iPhone 5S. When I was a customer, everything worked great, except one thing, Calls.
    What would happen during is:
    1) The calls would sound metallic/robotic
    2) the calls would sort of go in and out (for example I would hear: " Yeah ... Fun at... Saturday)
    (Both 1 and 2 would happen indoors and outdoors)
    3) Calls would drop
    So like any reasonable person, I called into Customer Service and was offered a Network Extender for $199. This did help indoors for the most part, but not outside (like literally outside my building; out of range perhaps?)
    I read of others having the same issues here, so I knew I wasn't alone, but there was just no solution to the problem. I thought it was my iPhone at first. However, I ported out to AT&T and the calls were crystal clear compared to VZW. So that kinda confirmed it's not my phone.
    My zip code is 10453 (and this area has great coverage according to the coverage map, but I couldn't get any more than 3 bars of LTE outside and 1-2 indoors). My question is, has this issue been resolved? If so how can I improve it? Honestly looking forward to being a VZW customer again, despite no simultaneous talk and surf on the iPhone.
    Thanks for any comments/solutions offered!

    When the person called me, I was indoors. I am the one with the ATT phone (wanting to switch to vzw) and never get this issue, not even when Sprint callers call me. The person who called me was outdoors and he has Verizon (zip: 10023)
    The call was very choppy with the voice cutting in and out on his end, and the call was slightly metallic sounding. I could barely understand a word he was saying. The quality was exactly the same when I was with Verizon. At first I thought it was my phone, and now this confirms it never was my phone. I am truly convinced this is a notice cancellation issue with verizon because like I said, I never get this issue when Sprint users call me. It doesn't really matter who initiates the call, the quality is always the same, horrible.
    I really want to be part of VZ but I can't if I am to expect these issues!   please help. I don't know if it's congestion or just the call coding itself.

  • IPhone 5 call quality issue. (Either call ends or very choppy on the other end)

    At random times my calls don't go through. The phone says call ended and doesn't ring. The reception is either full or close to full. This has occurred numerous times while calling different numbers. If I do manage to get the phone to ring, the person on the other end wouldn't be able to hear me as it would be very choppy. I have tried to reset the network settings with no luck. It is a random thing that happens at random times. It is not the carrier issue as all other functions of the phone work. Also this phone is an unlocked unit from Apple and is not in the U.S.

    I just replied to a similar post and I'll copy and paste my response here. I was having the same exact issue. Here is my possible fix.
    Yesterday I updated the OS to the latest release. Then right after that I called AT&T and they reset my sim card. Or something like that. They did some sort of reset.
    I then got in my car and drove around to test the phone. Because that is when the problem is worse. FINALLY they claim to be able to hear me clearly!!!!
    I think it was the combination of both the OS update and the sim card reset that fixed it. Hopefully..... It has only been one day but so far so good. I'll update this post if things change.
    Try this and let us know if this works for you.

  • IPHONE CALLS EKO ISSUES

    HI MI FRIENDS DO NOT WANT TO TALK TO ME ON MY IPHONE ANY MORE,THE HEAR TOO MUCH EKO,EKO EKO. IS THERE ANY BODY WHIT SAME ISSUE.

    FECHOS,
    basically VOIP means Voice Over I P (IP = Internet Packages ???).
    So your voice is not transferred via a telephone wire (neither analogue nor digitally); instead it is packed into data packages, which are sent individually on different free routes over the Internet and are packed together in the right order at the recipient. As one can imagine, it is magic that this works at all, so one should not be surprised, if the quality is not always as expected.
    I suspect phone companies using this for part of their voice traffic (as it does not depend on the own infrastructure but on somebody else's - that way being cheaper).

  • Poor On Call Audio Quality issue

    Hi guys,
    Im aware everyone has issues while listening to music via the headphones as i have that too. Thats something i can live with. 
    However, what i cant live it is poor on call quality issues without the headphones. The other person on the call doesnt sound all that loud, clear n crisp to me. I keep having to press the phone more towards my ear to hear them louder and better. Its sub par. Its worse than any phone ive used. 
    I just switched from an iPhone to this and im very dissappointed.
    NOKIA PLEASE FIX THESE AUDIO QUALITY ISSUES!!! This needs more addressing than the battery issues.. 

    Happens to me on Lumia 800 (12070). Usually at the beginning of the call I can hear the other party well but the call quality seems to degrade slowly over the course of the call. I've tried pressing the phone closer to ear and going volume up or down but in some points of the call I have really hard time hearing what they're saying. Then it goes away and I can hear well again. It's not so much volume issue rather than the call getting really unclear.

  • Charge cases effect call quality

    I recently posted an issue with my Charge regarding call quality (it was "solved", so I'm opening up a new post since I am now having the same issue again).
    I purchased the diamond design silicone case at Verizon when I purchased my charge (plastic-type case).  I was having poor quality with the charge; a loud, scratching static noise was produced on 50% of my calls.  I removed this case, and I've had no call quality issues.
    I recently purchased a new case at a Verizon store; the soft "rubbery" silicone case.  At first, I did not experience call quality problems (I've had the case for about 5 days).  Now, I'm experience the same "static" scratching noises on 50% of my calls.  I have to hang up and call back to get a clear call, and this is becoming very frustrating.  I've spoken with IT over the phone, and they have no knowledge of this issue.  I am now removing this new "soft" silicone case to see if my calls will be effected.
    This is a serious issue that needs to be addressed; of all things, call quality is paramount with a "phone".  I need to have some sort of protection encasing my $300 smartphone, however, it appears cases for the Charge effect the call quality.  I've read that other people are now having this issue.

    Hello Redfish542,
    I read your other posting with the indication that you determined the issue is not regarding the case on the device. 
    May I have you verify that wi-fi and Bluetooth is turned off on the device? Sometimes these technologies can effect the call quality. How many bars of signal do you have before and during the call? Is there a fluctuation between the to phones status? Another troubleshooting step you can try is to turn the volume down to medium & retest. If it's possible to post a picture of the icon that appears, that would be a great help.
    I hope this information is helpful and addresses your concerns. 

  • IPhone 5S Bluetooth call quality

    Problem: Degraded iPhone sound quality over Bluetooth when making voice call, FaceTime video/audio calls and Siri requests.
    I have been waiting for Apple to release a software update to fix this issue for some time. It appears to be a known issue however I have yet to see a response from Apple regarding the issue. Oddly, streaming music from my iPhone via Bluetooth delivers crystal clear sound. I suspect the iPhone uses a different Bluetooth profile for call streaming. Would someone be able to confirm this?
    It is worth noting that I am having this issue with every one of my Bluetooth devices. I have a Bluetooth-enabled Sony HiFi, Sony Bluetooth earphones and a Pioneer car stereo system with Parrot Bluetooth.
    Does anybody else have this issue? Would someone else with an iPhone 5S + Bluetooth devices be able to try and see if they share the exact same problem (that is degraded sound quality when making FaceTime video/audio calls and Siri requests over Blueooth)
    Thanks.

    Dabbaranks wrote:
    I have the distortion/crackling/popping with non-music, non-voice sounds (game sounds) on my Sony SBH80.  Is it a Mac thing?
    If your question is about your computer, you might be better off posting in the relevant Mac forum. This is the iPhone forum.
    Best of luck.

  • Iphone 5s - Bad call quality

    Hi, I recently noticed a problem on my iphone 5s, everytime when I received a call, I barely heard the caller, the voice seemed to be coming from a well, not clear at all. What should I do?

    Hello  Elbeyrouni,
    If I understand correctly, the call volume used to be fine but now it's hard to hear the other person.
    Here are some steps to try for that.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Increase the volume during the call.
    Make sure nothing is blocking the receiver. If you're using a protective case or display film, remove it and try again.
    Make sure nothing is plugged into the headphone jack or the dock connector.
    Check the receiver opening to see if it is clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush.
    Try another location with better signal. If the audio issue happens only when on a call, it could be due to the location.
    If the iPhone is paired with a Bluetooth headset or a car kit, try turning off Bluetooth on your device. Learn more about troubleshooting Bluetooth connections.
    Restart the iPhone.
    Make sure your device is up to date.
    If the issue is not resolved, contact Apple Support.
    Thank you for visiting Apple Support Communities.
    Nubz

  • IPhone 5s, call quality, periodic echo

    I upgraded from the iPhone 4 to the 5s 4 months ago.  Ever since I upgraded, I have periodic issues with call quality.  In the middle of a call I will all the sidden start to hear myself talk and the person on the other end cant hear me at all and I cant hear them.  This happens to be in the Atlanta, GA area in the same places on interstate 75.

        jab1820,
    Thank you so much for reaching back out to us. Could you please provide us with your mailing zip code? With your iPhone 5s can you please reset your network settings. You can do this by going into Settings, General, Reset, Reset Network Settings. Then re-try the call quality after that reset has been completed. Please keep us posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • IPhone 5 call quality

    I just bought my iPhone 5. I was disappointed when I received a call and discovered the phone call quality on my end is bad. The other person's voice sounded very tiny and soft although I have already turned up the volume to maximum. Is it that way with all iPhone 5? The receiver could hear me clearly. I tried speaker and the person voice sounded much much clearer.
    Please recommend suggestion to fix this or I have a defected phone?
    Thank you!

    Actually, after examining my phone properly, i think that this problem might have been caused by the plastic cover that I have yet to remove as it looks like it is blocking the earpiece. ><
    My apologies.

  • IPhone Poor Call Quality Without Headphones

    I have an iPhone 4s.  When I am working in my home office, the carrier signal level is good - typically three or four bars out of 5.  However, the call quality is sometimes very poor - I can hear the other caller very clearly but they cannot hear me clearly and often say that it sounds like I am talking through a long tube or that my voice has some kind of metallic quality. However, when I plug my earphones in, it all works just fine. The call quality is generally fine in other locations.
    I did wonder if this is something do to with the apple ambient noice cancelling system and some kind of interaction with it and the case that I am using but I have tested it with and without case and it makes no difference.
    Any suggestions that you might have would be gratefully received.

    I did they have know referred me to Apple!!!

  • My iphone 5 is having poor call quality?  Verizon can't figure out why.  Anyone else having problems?

    My phone has been working without any problems since I bought it in January.  Yesterday I had a Zagg invisible shield applied to my phone and as soon as I got home, the call quality was horrible.  I could hear people on the other end however, they couldn't hear me, the call would be dropped, or they said I sounded like I was in a tunnel.  I removed the zagg cover and it is still not working like it was before.  I called Verizon and did everything from resetting the network settings, to restoring the phone to factory settings and restoring it from the last back up.  Nothing is working.  I have never had these problems up until yesterday.  Verizon would try calling my cell and it would ring on their side but not on mine.  Very strange.  Phone is up to date on its software.
    Anyone else having these issues or know a way it can be fixed??? 
    Thank you!!!!

    Hello the third!
    I placed the <ul> css code you supplied in the main.css file as well. No avail.
    But I did just notice there is a tiny thin yellow line between the logo and nameplate graphics at the top and the menu bar. That yellow line disappears in IE8 compatability mode. The graphics sit right on top of the menu bar, as it appears in Dreamweaver, and the margins and such all line up. In regular IE7, the thin yellow line is always there.
    I don't know if this helps, but it is something I just noticed while tinkering around.

  • Quality issues with calls from US to Korea

    I've always been a big fan of Skype. I have a premium account and I use "Skype to go" to call from the US to South Korea. Starting about 5 months ago, the quality of these calls has severely degraded. It is almost not worth the call. It is very difficult for me to hear the people I've called and for them to hear me as well. There is no Skype customer support contact phone number listed anywhere on the Skype website that I can find. Otherwise, I'd be addressing this issue with a real person. Is there a reason for this call quality degradation? Is there a fix in work? Is there a customer service number I can call? Is it time for me to leave Skype?

    rates are available on http://www.skype.com/en/rates/  just enter Itay in the destination and check the rates lower down the page.
    If you are going to make a lot of calls - check the subscriptions available too...
    There are subscriptions that include landlines and mobiles as well

Maybe you are looking for

  • How to get ServerStats working

    Hi all, What do you need to do to get ServerStats working out-of-the-box on a Windows 7 machine? Regards

  • IHC Incoming payment - no posting on clearing account

    Hello together, I need some help with the processing of an external bank statement. I try to read an incoming payment from an external bank statement (MT940). When I post the bank statemenat with FEBAN I get two documents: one for general ledger and

  • Looking for a Logic Tutor

    I'm interested in paying someone to help me with a Logic project I'm currently working on - in Jacksonville, Florida. I need help on the project, and I need to learn Logic. If this is inappropriate in this forum, please let me know. Is anyone availab

  • Java.rmi.NoSuchObjectException: Session has timed out or was invalidated

    I am getting error in subject when my application is not using Statefull Session Bean for sometime(20 Minutes or so). What i understand is that after session bean is passivated and next time some method is invoked, it is throwing this exeception. My

  • Working with Sequences

    I have a primary key code in my class being generated by a sequence. How can I use another sequence to generate the number value for another attribute of this same class? Thank's. Expedito.