Iphone missing "mode" option in wifi WPA2-Enterprise

On my iPad 2, when I list the wifi networks and choose our WPA2-Enterprise network, there is a "mode" option to choose either Automatic or EAP-TLS.
On my iPhone, that option is not there which means I cannot use my Certificate.
Both devices are running IOS6.
The iPad 2 has version 6.0 (10A403)
The iPhone 5 has version 6.0 (10A405)
I need to connect to my wifi network using a certificate!
Any and all help is welcomed

Ok, my bad. I installed the certificate on the iPad and not on the iPhone. Hence, if there is no certificate, the "MODE" option does not come up. iPhones are smarter than me!

Similar Messages

WiFi WPA2 enterprise

I’m encountering problem setting up a wifi wpa2 Enterprise on my Iphone 4s. I set it up using Iphone configuration utility and settings are correct. The problem is that the connection don’t works. I’m sure setting are correct because I set it up the same wifi also on the Airbook with Lion and parameter and certificates used for authentication are exactly the same. Any idea on why on the iphon it don’t work?
Below some the log file.
Thanks
andrea
Jan 11 16:14:18 Scoia-Aifone Preferences[558] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0xde41320:<VPNBundleController: 0xde41320>): _serviceCount(1), serviceCount(1), toggleInRootMenu(1), RootMenuItem(1)
Jan 11 16:14:20 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setDISASSOCIATE() [wifid]:
Jan 11 16:14:20 Scoia-Aifone timed[679] <Notice>: (Note ) CoreTime: Not setting system time to 01/11/2012 15:14:20 from NTP because time is unchanged
Jan 11 16:14:20 Scoia-Aifone eapolclient[680] <Notice>: en0 START
Jan 11 16:14:20 Scoia-Aifone timed[679] <Notice>: (Note ) CoreTime: Not setting time zone to Europe/Rome from Location
Jan 11 16:14:21 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setASSOCIATE() [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA_8021X, key = CIPHER_NONE    , 802.1X .
Jan 11 16:14:21 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANJoinManager::handleAssoc(): status = 2, reason = 0, flags = 0x0, authtype = 0, addr = 00:3a:98:7d:ee:30
Jan 11 16:14:21 Scoia-Aifone wifid[29] <Error>: WiFi:[347987661.158384]: Processing link event UP
Jan 11 16:14:21 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANJoinManager::handleAssoc(): status = 2, reason = 0, flags = 0x0, authtype = 0, addr = 00:3a:98:7d:ee:30
Jan 11 16:14:21 Scoia-Aifone kernel[0] <Debug>: [14591.399631250]: AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Jan 11 16:14:21 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLAN Joined BSS:     @ 0xc0bc4000, BSSID = 00:3a:98:7d:ee:30, rssi = -73, rate = 54 (100%), channel = 6, encryption = 0x4, ap = 1, failures = 0, age = 1, ssid[ 6] = "WIFI3D"
Jan 11 16:14:21 Scoia-Aifone kernel[0] <Debug>: AirPort: Link Up on en0
Jan 11 16:14:21 Scoia-Aifone kernel[0] <Debug>: en0: BSSID changed to 00:3a:98:7d:ee:30
Jan 11 16:14:21 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore:startRoamScan(): 2843 Delaying RoamScan; because Join Mgr Busy 0 isWaitingforIP 1
Jan 11 16:14:22 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setCIPHER_KEY() [eapolclient]: type = CIPHER_PMK, index = 0, flags = 0x0, key lenght 0, key rsc lenght 0
Jan 11 16:14:24 Scoia-Aifone mDNSResponder[47] <Error>: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:F2CB:A1FF:FECB:ED60)
Jan 11 16:14:26 Scoia-Aifone UserEventAgent[12] <Warning>: Unable to cancel system wake for 2012-01-11 16:14:11 +0100. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Jan 11 16:14:27 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANNetManager::checkRealTimeTraffic(): set roam parameters: counters Rx:1204 Tx:22
Jan 11 16:14:28 Scoia-Aifone eapolclient[680] <Notice>: en0 TLS: authentication failed with status 1
Jan 11 16:14:28 Scoia-Aifone wifid[29] <Error>: WiFi:[347987668.238433]: Network WIFI3D Both autojoin and user join dates are NULL
Jan 11 16:14:28 Scoia-Aifone wifid[29] <Error>: WiFi:[347987668.246099]: Processing link event DOWN
Jan 11 16:14:28 Scoia-Aifone eapolclient[680] <Notice>: en0 STOP
Jan 11 16:14:28 Scoia-Aifone eapolclient[681] <Notice>: en0 START
Jan 11 16:14:28 Scoia-Aifone Preferences[558] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0xde41320:<VPNBundleController: 0xde41320>): _serviceCount(1), serviceCount(1), toggleInRootMenu(1), RootMenuItem(1)
Jan 11 16:14:28 Scoia-Aifone wifid[29] <Error>: WiFi:[347987668.683288]: Processing link event UP
Jan 11 16:14:28 Scoia-Aifone UserEventAgent[12] <Warning>: Unable to cancel system wake for 2012-01-11 16:14:18 +0100. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANNetManager::handleDeauth(): status = 0, reason = 23, flags = 0x0, authtype = 0, addr = 00:3a:98:7d:ee:30
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setCIPHER_KEY() [eapolclient]: type = CIPHER_PMK, index = 0, flags = 0x0, key lenght 0, key rsc lenght 0
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANNetManager::leaveNetworkAsync(): kDeauthdCurrNetwork already set. Skipping call to leaveNetworkASync
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLAN Left BSS:       @ 0xc0bc4000, BSSID = 00:3a:98:7d:ee:30, rssi = -77, rate = 54 (100%), channel = 6, encryption = 0x4, ap = 1, failures = 0, age = 8, ssid[ 6] = "WIFI3D"
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setDISASSOCIATE() [wifid]:
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setASSOCIATE() [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA_8021X, key = CIPHER_NONE    , 802.1X .
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: [14598.930095541]: AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLAN Joined BSS:     @ 0xc0bc4000, BSSID = 00:3a:98:7d:ee:30, rssi = -77, rate = 54 (100%), channel = 6, encryption = 0x4, ap = 1, failures = 0, age = 8, ssid[ 6] = "WIFI3D"
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AirPort: Link Up on en0
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: en0: BSSID changed to 00:3a:98:7d:ee:30
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore:startRoamScan(): 2843 Delaying RoamScan; because Join Mgr Busy 0 isWaitingforIP 1
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setCIPHER_KEY() [eapolclient]: type = CIPHER_PMK, index = 0, flags = 0x0, key lenght 0, key rsc lenght 0
Jan 11 16:14:31 Scoia-Aifone eapolclient[681] <Notice>: en0 TLS: authentication failed with status 1
Jan 11 16:14:31 Scoia-Aifone wifid[29] <Error>: WiFi:[347987671.532160]: Network WIFI3D Both autojoin and user join dates are NULL
Jan 11 16:14:31 Scoia-Aifone eapolclient[681] <Notice>: en0 STOP
Jan 11 16:14:31 Scoia-Aifone wifid[29] <Error>: WiFi:[347987671.542420]: Processing link event DOWN
Jan 11 16:14:31 Scoia-Aifone UserEventAgent[12] <Warning>: Unable to cancel system wake for 2012-01-11 16:14:18 +0100. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Jan 11 16:14:31 Scoia-Aifone eapolclient[682] <Notice>: en0 START
Jan 11 16:14:31 Scoia-Aifone Preferences[558] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0xde41320:<VPNBundleController: 0xde41320>): _serviceCount(1), serviceCount(1), toggleInRootMenu(1), RootMenuItem(1)
Jan 11 16:14:31 Scoia-Aifone wifid[29] <Error>: WiFi:[347987671.974798]: Processing link event UP
Jan 11 16:14:31 Scoia-Aifone UserEventAgent[12] <Warning>: Unable to cancel system wake for 2012-01-11 16:14:21 +0100. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setCIPHER_KEY() [eapolclient]: type = CIPHER_PMK, index = 0, flags = 0x0, key lenght 0, key rsc lenght 0
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANNetManager::handleDeauth(): status = 0, reason = 23, flags = 0x0, authtype = 0, addr = 00:3a:98:7d:ee:30
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANNetManager::leaveNetworkAsync(): kDeauthdCurrNetwork already set. Skipping call to leaveNetworkASync
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLAN Left BSS:       @ 0xc0bc4000, BSSID = 00:3a:98:7d:ee:30, rssi = -77, rate = 54 (100%), channel = 6, encryption = 0x4, ap = 1, failures = 0, age = 11, ssid[ 6] = "WIFI3D"
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setDISASSOCIATE() [wifid]:
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setASSOCIATE() [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA_8021X, key = CIPHER_NONE    , 802.1X .
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: [14602.222531083]: AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLAN Joined BSS:     @ 0xc0bc4000, BSSID = 00:3a:98:7d:ee:30, rssi = -77, rate = 54 (100%), channel = 6, encryption = 0x4, ap = 1, failures = 0, age = 12, ssid[ 6] = "WIFI3D"
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AirPort: Link Up on en0
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: en0: BSSID changed to 00:3a:98:7d:ee:30
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore:startRoamScan(): 2843 Delaying RoamScan; because Join Mgr Busy 0 isWaitingforIP 1
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setCIPHER_KEY() [eapolclient]: type = CIPHER_PMK, index = 0, flags = 0x0, key lenght 0, key rsc lenght 0
Jan 11 16:14:34 Scoia-Aifone eapolclient[682] <Notice>: en0 TLS: authentication failed with status 1
Jan 11 16:14:34 Scoia-Aifone wifid[29] <Error>: WiFi:[347987674.708487]: Network WIFI3D Both autojoin and user join dates are NULL
Jan 11 16:14:34 Scoia-Aifone wifid[29] <Error>: WiFi:[347987674.716635]: Processing link event DOWN
Jan 11 16:14:34 Scoia-Aifone UserEventAgent[12] <Warning>: Unable to cancel system wake for 2012-01-11 16:14:21 +0100. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Jan 11 16:14:34 Scoia-Aifone eapolclient[682] <Notice>: en0 STOP
Jan 11 16:14:35 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANNetManager::handleDeauth(): status = 0, reason = 23, flags = 0x0, authtype = 0, addr = 00:3a:98:7d:ee:30
Jan 11 16:14:35 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setCIPHER_KEY() [eapolclient]: type = CIPHER_PMK, index = 0, flags = 0x0, key lenght 0, key rsc lenght 0
Jan 11 16:14:35 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANNetManager::leaveNetworkAsync(): kDeauthdCurrNetwork already set. Skipping call to leaveNetworkASync
Jan 11 16:14:35 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLAN Left BSS:       @ 0xc0bc4000, BSSID = 00:3a:98:7d:ee:30, rssi = -76, rate = 54 (100%), channel = 6, encryption = 0x4, ap = 1, failures = 0, age = 14, ssid[ 6] = "WIFI3D"
Jan 11 16:14:35 Scoia-Aifone kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jan 11 16:14:37 Scoia-Aifone mDNSResponder[47] <Error>: DeregisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:F2CB:A1FF:FECB:ED60)
Jan 11 16:14:39 Scoia-Aifone UserEventAgent[12] <Warning>: Unable to cancel system wake for 2012-01-11 16:14:24 +0100. IOPMCancelScheduledPowerEvent() returned 0xe00002c2

I did see those screenshots however that settings screen comes from selecting the Configure button next to the Authentication Method in the User Authentication section under Users. In each of your screenshots, the RADIUS Server ID number is 1 so I would also ensure that I've configured RADIUS Server ID 1 which can only be configured by going to Users -> RADIUS Servers.
All that said, I did see that your tests succeeded and I also don't understand the point of having RADIUS settings on the other screens and then having RADIUS ID info. My thinking is that you would be able to configure RADIUS once in the Users -> RADIUS Servers screen and then select the RADIUS Server ID in all the remaining screens without having to enter the RADIUS info over and over again. It would also think that you could skip the Users -> RADIUS Server screen and enter the RADIUS information over and over again and it should work...just like you set it up originally. However, based on past experience of programmatic errors, I would recommend configuring the RADIUS Server ID 1 under Users -> RADIUS Servers if you haven't already...just in case.
Shawn Eftink
CCNA/CCDA
Please rate all helpful posts and mark correct answers to assist others searching for solutions in the community.

WiFi WPA2 Enterprise not workign

Hi
I am the network administrator of Wi Fi over Enterprise, we have now 100 users trying to connect with Playbook but it have not been posible. we use WPA2 Enterprise EAP-TLS. First it was very dificult to download the cert to the device, We have accomplish that but we have not been able to connect toour network.
we use GeoTrust Global CA and Equifax Secure Certificate Authority.
Thanks in advance.

Hi rafaelsus
May be this kb's From BB database can help you on that!
KB27269
KB03735
KB04359
KB05227
KB02068
KB19236
Hope this helps you!!
Please give kudos or mark as a solution if this was helpful!! Thanks!!!!!!

TS1398 After the 6.0.1. update on my iPhone 4s the option for wifi has greyed out and cannot be selected. What can I do to restore wifi?

I have held off updated my iPhone 4s with the 6.0.1 but having problems connecting to wifi I thought maybe being out of date was the problem.
Having done the update the wifi option is now greyed out and cannot be selected at all. I have rebooted, forgotten networks and turned on and off so many times. There is nothing wrong with the wifi at home as other devices connect no problem. What can I do?

I'll repeat the Apple support pages linked in the previous post:
http://support.apple.com/kb/TS1559
Go through the step outlines there starting at the top and work down until you've solved the problem.

Lumia 820 WPA2 Enterprise

Hello,
I have one big problem. I can't reach wifi WPA2 Enterprise (Encryption: AES, Auth method: EAP (PEAP)).
It says: Connection unsuccessfull: Your phone couldn't reach the Wi-Fi network ...
But I'm able to connect WPA2-Personal, WEP. But that one in my school I can't
Other guys with WP8 can connect, also with androids and iPhones.
What I'm did? Factory reset and hard reset after. None of these help :/
Currently info:
Model: Lumia 820
OS ver: 8.0.10328.78
Firmware: 3047.0000.1328.3003 (Operator Plus PL SW variant)
Hardware: 1.0.0.0
Communication soft: 1.0.202132.3
I heard some people work with new Network+, my ver is: 1.3.2.1
Restored today!
Thanks for any help!

BUMP
New progress, I get log
here is log from windows phone 8 to cisco:
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID: SSAKHK\veteska.lukas
Account Name: veteska.lukas
Account Domain: SSAKHK
Fully Qualified Account Name: ssakhk.cz/####
Client Machine:
Security ID: NULL SID
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: 0014.f262.6300
Calling Station Identifier: 4c25.7894.01ac
NAS:
NAS IPv4 Address: 172.30.1.22
NAS IPv6 Address: -
NAS Identifier: aps320
NAS Port-Type: Wireless - IEEE 802.11
NAS Port: 15199
RADIUS Client:
Client Friendly Name: aps320
Client IP Address: 172.30.1.22
Authentication Details:
Connection Request Policy Name: Use Windows authentication for all users
Network Policy Name: pristup na wifi
Authentication Provider: Windows
Authentication Server: ####.ssakhk.cz
Authentication Type: PEAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 16
Reason: Authentication failed due to a user credentials mismatch. Either the user name provided does not map to an existing user account or the password was incorrect.
Password and user name is CORRECT!

Can the WUMC710 Media Connector support WPA2 - Enterprise?

I understand the complications utilizing WPA2 - Enterprise, but wish to attempt the encryption feasiblity on my network. I am using the EA6500 and two WUMC710's throughout the premise.
My question is can I link the EA6500 with my two WUMC710's and run WPA2 - Enterprise between them and to the clients? I do not see the option for the WPA2 - Enterprise encryption listed in the WUMC710 firmware so I could possibly assume that the answer is no, however I have been wrong too many times in the past to go on my assumption.
If the WUMC710 with the current firmware does not support the function I am inquiring about, do you think a new firmware would be developed to support WPA2 - Enterprise in the future?
Thank's for taking time with my questions.

To know more about the WUMC710, try this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=878e85e65ce64740bd5312cf7169efb0_WUMC710_Frequentl...

WPA2-enterprise WIFI can't connect after upgrading to 6.1 or higher

Hi. Please help.
We have a campus wifi with two ssids: one open for everyone and one closed with wpa2-enterprise (PEAP) security for staff. All iphones and ipads works just fine on ios version 6.01 but they can't connect to secured wifi network after updating to ios ver 6.1 and higher (tried 6.1.2). They still able to connect to open wlan ssid. Our WIFI equipment is: Extremenetworks WM3600 controllers and AP4600/AP4511 access points running WM5.4.1. WMM enabled.
WM3600 controller use Windows2008 r2 NPS server + active directory for authorization (selfsigned certificates is 2048 bit length).
WM3600 wlan staff configuration settings:
wlan Staff
description TOGU staff network
ssid STAFF
vlan 238
bridging-mode tunnel
encryption-type tkip-ccmp
authentication-type eap
no answer-broadcast-probes
protected-mgmt-frames optional
radius vlan-assignment
no motorola-extensions symbol-load-information
use aaa-policy Domain_aaa
Here is the log from iphone configuration utility with connection error:
Feb 20 17:18:00 kernel[0] <Debug>: en0::IO80211Interface::postMessage bssid changed
Feb 20 17:18:00 Preferences[132] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from to (null)
Feb 20 17:18:00 Preferences[132] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x1edbea10:<VPNBundleController: 0x1edbea10>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
Feb 20 17:18:00 wifid[14] <Error>: WiFi:[383033880.387575]: Failed to associate with STAFF: -3900
Hope to get any help.

Yes. We tried to reboot iphone(s), tried also with ipads 6.1. We tried to reset network settings.
We tried to add wifi profile to clean new iphone using iphone configuration utility.
Wireless supplier can't help - they told it is an ios issue and I think this is true because all
ipads/iphones works just fine on ios5 or 6.0.1 but can't connect on 6.1

Cannot connect to WIFI with WPA2 enterprise security

I'm currently trying to switch my Wifi from WPA2 Personal to WPA2 Enterprise using a dd-wrt flashed TP-Link router and a Synology Diskstation as the RADIUS server. The diskstation also creates the CA certificate which I can download from there for all client devices.
Configuration on the side of the router appears to be fine, I've entered all the details for RADIUS authentication and left "WPA Algorithms" at its default setting "TKIP", other options being ("AES" and "TKIP+AES"). I said it appears to be fine because my Android phone connection is established succesfully using the following (default) parameters:
EAP method: PEAP
Phase 2 Auth: NONE (also works with MSCHAPV2, and probably other options)
CA cert: unspecified (didn't download it to smartphone, must be fetched automatically from router I guess)
User cert: unspecified
Identity: myDiskstationUsername
Anonymous Identity: (blank)
Password: myDiskstationPassword
So far, so good... I still cannot manage to get a connection from my laptop running Arch. Prefered method would be via "wicd". The best match seems to be the following configuration profile:
name = PEAP with TKIP/MSCHAPV2
author = Fralaltro
version = 1
require identity *Identity password *Password
optional ca_cert *Path_to_CA_Cert
protected password *Password
ctrl_interface=/var/run/wpa_supplicant
network={
ssid="$_ESSID"
scan_ssid=$_SCAN
proto=WPA
key_mgmt=WPA-EAP
pairwise=TKIP
group=TKIP
eap=PEAP
identity="$_IDENTITY"
password="$_PASSWORD"
ca_cert="$_CA_CERT"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
But it's not working, both with and without specifing the optional path to the CA certificate. Any ideas what I could've been missing or any clues for debugging?
Last edited by saciel (2013-11-07 09:55:16)

Why don't you use netctl?
I'm using netctl to connect to my FreeRadius Server, and I use this config...
Description='A wireless connection using a custom network block configuration'
Interface=wlp0s29f7u3
Connection=wireless
Security=wpa-configsection
IP=static
Address='192.168.1.200/24'
Gateway='192.168.1.1'
DNS=('192.168.1.1')
WPAConfigSection=(
'ssid="SSID"'
'key_mgmt=WPA-EAP'
'eap=PEAP'
'phase2="auth=MSCHAPV2"'
'group=CCMP'
'pairwise=CCMP'
'identity="user"'
'password="password"'
'priority=1'

My laptop is using Windows 8.1 and it can't connect to a WiFi using WPA2/Enterprise authenticate

I am using a laptop Dell Inspiron 15z with Windows 8.1 64 Bit OS. And i build a test lab to test WPA2/Enterprise authenticate.
My Lab is like that:
1/ My DC + DNS using Windows 2012 RC2 Standard.
2/ I install CA + Radius Server on DC Server.
3/ My AP WiFi is DrayTek AP810
After configed i can you use my iphone 5s (ios 8.1), my android phone (Samsung Galaxy), 1 laptop Windows 7, 1 laptop Windows 8 to test. And all of them can connected with no problem.
But my laptop using Windows 8.1 64 bit OS can't connected. After i choise the WiFi, it only show "checking network requirement"- not show the option question username and password. (and i config it exactly like laptop Windows 8).
I have tried find the answer on Google but nothing help me. (i have choise PEAP, install Certificate...)
Please help me guys. Thank you so much.

Hi,
About this issue, we could troubleshoot as the following methods on the Windows 8.1 client side.
1. Maker sure the "Automatically use my Windows logon name and password" setting on the client is disabled and on your client and type in the correct domain name when prompted.
2. If the issuer persists, delete this network profile in your Windows 8.1 client with commands and manually configure it as
this similar thread.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can't create a WPA2-Enterprise wireless connection; missing Microsoft: PEAP

OS: Windows 7 64-bit Enterprise
Hardware: Lenovo T410S w/Intel 5300 ABGN Wireless
If I try to build the wireless connection manually and choose WPA2-Enterprise, then click next, I get 'An unexpected error occurred.' and no options to configure; just close.
I then tried to create a Preshared Key WPA2 connection. This worked fine. When I go to edit the connection, I have the ability to select the WPA2-Enterprise options, however in the list of Network Authentication methods (under Security Tab), I don't have
the Microsoft: PEAP or SmartCard options. I only have Cisco: LEAP,PEAP,EAP-FAST and Intel: EAP-SIM,EAP-TTLS,EAP-AKA (6 entries).
It's my theory that because the Microsoft options are missing, the wizard gets the unexpected error. I'm wondering how I get the MS ones back.

Hi,
Thanks for posting in Microsoft TechNet forums.
Do you have Symantec installed? It is said the issue could be due to conflict with Symantec Endpoint Protection. Please uninstall\reinstall Symantec
if it is there.
Best Regards
Magon Liu
TechNet Subscriber Support
in forum. If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

After IOS 5 upgrading Iphone we set up wireless network each time (WPA2 Enterprise)

Our company is connecting to wpa2 enterprise.
when we used IOS 4.XX we could connect wpa2 enterprise
but after upgrading IOS 5.0, it occured some problem.
Our staff should change a password per 3 month, at that time we should delete a network
but SSID set it up again each time and put a userID / Password when we connect wifi
i read other comment that user sloved problem using iPhone Configuration Utility in apple support communites but it bother our staff.
is there another sloution?

Has anyone tried it? I would like to have an answer, I'm trying since Friday and is working properly.

IPhone 3GS (au) support for WPA2 Enterprise

Can someone provide me with an official page outlining whether the iPhone 3GS from Australia supports WPA2 Enterprise wifi security?
Also, whether it depends on the version of iOS as well.
Thanks.

Enterprise networking is now supported I believe.
It's not something I know much about, but the following article(s) may help you.
Installing a Profile
Configuring the Apple TV

Wifi w/WPA/WPA2 Enterprise

I have a strange issue. We are trying to connect iPhones to the corporate wifi network. This uses WPA/WPA2 Enterprise encryption with EAP-FAST authentication. I have created a Wifi Configuration Profile using the iPhone Config Utility v3.3. All settings look correct.
I install this config profile to an iPhone 4 and it cannot connect.
I install this same config profile to iPod Touch 2G and it does not connect.
I install this same config to iPad2 and it works perfectly fine. Connects every time no problem.
Apparently there is some difference in how the devices handle wifi security?!?
Does anyone have any insight into this?

Is the wireless network an "n" network?
If so, the iPhone 4 supports 802.11b/g/n Wi-Fi (802.11n 2.4GHz only).
No such 2.4GHz only requirement for an "n" network with the iPad.

Wifi problem after connecting to wpa2 enterprise

hi all.
I have iphone 3gs with me. It has doing great on all the wifi connection before. I can connect to my home wpa2 wifi and office hidden wpa2 wifi with no problem. Then, I tried to join my office enterprise wifi with wpa2 enterprise. It was successfull. However, just after that, i can't get connected back to my office hidden wpa2 wifi. it just like deny the connection. I reset the network connection, forget network still fail. Even i disable the wpa2 security but failed also. Anyway, i still able to connect to my home wifi and office enterprise wifi.
please help as. I can't say the hardwar problem as it can get connected at my home network. sight

anybody care to help me please?

Config iPhone 4s for wpa2-enterprise

How to configure an iPhone 4s for wpa2-enterprise

I've recently upgraded my iPhone 4 to ios 5.0.1 and it exhibits exactly the same problem at the Office where we use WPA2-Enterprise which basically means the Cisco Jabber app is useless when moving around the complex and in and out of sleep mode.
What's odd is this wasn't a problem on ios 4.3.3

Iphone missing "mode" option in wifi WPA2-Enterprise

Similar Messages

Maybe you are looking for