WiFi WPA2 Enterprise not workign

Hi
I am the network administrator of Wi Fi over Enterprise, we have now 100 users trying to connect with Playbook but it have not been posible. we use WPA2 Enterprise EAP-TLS. First it was very dificult to download the cert to the device, We have accomplish that but we have not been able to connect toour network.
we use GeoTrust Global CA and Equifax Secure Certificate Authority.
Thanks in advance.

Hi rafaelsus
May be this kb's From BB database can help you on that!
KB27269
KB03735
KB04359
KB05227
KB02068
KB19236
Hope this helps you!!
Please give kudos or mark as a solution if this was helpful!! Thanks!!!!!!

Similar Messages

WiFi WPA2 enterprise

I’m encountering problem setting up a wifi wpa2 Enterprise on my Iphone 4s. I set it up using Iphone configuration utility and settings are correct. The problem is that the connection don’t works. I’m sure setting are correct because I set it up the same wifi also on the Airbook with Lion and parameter and certificates used for authentication are exactly the same. Any idea on why on the iphon it don’t work?
Below some the log file.
Thanks
andrea
Jan 11 16:14:18 Scoia-Aifone Preferences[558] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0xde41320:<VPNBundleController: 0xde41320>): _serviceCount(1), serviceCount(1), toggleInRootMenu(1), RootMenuItem(1)
Jan 11 16:14:20 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setDISASSOCIATE() [wifid]:
Jan 11 16:14:20 Scoia-Aifone timed[679] <Notice>: (Note ) CoreTime: Not setting system time to 01/11/2012 15:14:20 from NTP because time is unchanged
Jan 11 16:14:20 Scoia-Aifone eapolclient[680] <Notice>: en0 START
Jan 11 16:14:20 Scoia-Aifone timed[679] <Notice>: (Note ) CoreTime: Not setting time zone to Europe/Rome from Location
Jan 11 16:14:21 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setASSOCIATE() [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA_8021X, key = CIPHER_NONE    , 802.1X .
Jan 11 16:14:21 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANJoinManager::handleAssoc(): status = 2, reason = 0, flags = 0x0, authtype = 0, addr = 00:3a:98:7d:ee:30
Jan 11 16:14:21 Scoia-Aifone wifid[29] <Error>: WiFi:[347987661.158384]: Processing link event UP
Jan 11 16:14:21 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANJoinManager::handleAssoc(): status = 2, reason = 0, flags = 0x0, authtype = 0, addr = 00:3a:98:7d:ee:30
Jan 11 16:14:21 Scoia-Aifone kernel[0] <Debug>: [14591.399631250]: AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Jan 11 16:14:21 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLAN Joined BSS:     @ 0xc0bc4000, BSSID = 00:3a:98:7d:ee:30, rssi = -73, rate = 54 (100%), channel = 6, encryption = 0x4, ap = 1, failures = 0, age = 1, ssid[ 6] = "WIFI3D"
Jan 11 16:14:21 Scoia-Aifone kernel[0] <Debug>: AirPort: Link Up on en0
Jan 11 16:14:21 Scoia-Aifone kernel[0] <Debug>: en0: BSSID changed to 00:3a:98:7d:ee:30
Jan 11 16:14:21 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore:startRoamScan(): 2843 Delaying RoamScan; because Join Mgr Busy 0 isWaitingforIP 1
Jan 11 16:14:22 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setCIPHER_KEY() [eapolclient]: type = CIPHER_PMK, index = 0, flags = 0x0, key lenght 0, key rsc lenght 0
Jan 11 16:14:24 Scoia-Aifone mDNSResponder[47] <Error>: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:F2CB:A1FF:FECB:ED60)
Jan 11 16:14:26 Scoia-Aifone UserEventAgent[12] <Warning>: Unable to cancel system wake for 2012-01-11 16:14:11 +0100. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Jan 11 16:14:27 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANNetManager::checkRealTimeTraffic(): set roam parameters: counters Rx:1204 Tx:22
Jan 11 16:14:28 Scoia-Aifone eapolclient[680] <Notice>: en0 TLS: authentication failed with status 1
Jan 11 16:14:28 Scoia-Aifone wifid[29] <Error>: WiFi:[347987668.238433]: Network WIFI3D Both autojoin and user join dates are NULL
Jan 11 16:14:28 Scoia-Aifone wifid[29] <Error>: WiFi:[347987668.246099]: Processing link event DOWN
Jan 11 16:14:28 Scoia-Aifone eapolclient[680] <Notice>: en0 STOP
Jan 11 16:14:28 Scoia-Aifone eapolclient[681] <Notice>: en0 START
Jan 11 16:14:28 Scoia-Aifone Preferences[558] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0xde41320:<VPNBundleController: 0xde41320>): _serviceCount(1), serviceCount(1), toggleInRootMenu(1), RootMenuItem(1)
Jan 11 16:14:28 Scoia-Aifone wifid[29] <Error>: WiFi:[347987668.683288]: Processing link event UP
Jan 11 16:14:28 Scoia-Aifone UserEventAgent[12] <Warning>: Unable to cancel system wake for 2012-01-11 16:14:18 +0100. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANNetManager::handleDeauth(): status = 0, reason = 23, flags = 0x0, authtype = 0, addr = 00:3a:98:7d:ee:30
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setCIPHER_KEY() [eapolclient]: type = CIPHER_PMK, index = 0, flags = 0x0, key lenght 0, key rsc lenght 0
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANNetManager::leaveNetworkAsync(): kDeauthdCurrNetwork already set. Skipping call to leaveNetworkASync
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLAN Left BSS:       @ 0xc0bc4000, BSSID = 00:3a:98:7d:ee:30, rssi = -77, rate = 54 (100%), channel = 6, encryption = 0x4, ap = 1, failures = 0, age = 8, ssid[ 6] = "WIFI3D"
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setDISASSOCIATE() [wifid]:
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setASSOCIATE() [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA_8021X, key = CIPHER_NONE    , 802.1X .
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: [14598.930095541]: AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLAN Joined BSS:     @ 0xc0bc4000, BSSID = 00:3a:98:7d:ee:30, rssi = -77, rate = 54 (100%), channel = 6, encryption = 0x4, ap = 1, failures = 0, age = 8, ssid[ 6] = "WIFI3D"
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AirPort: Link Up on en0
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: en0: BSSID changed to 00:3a:98:7d:ee:30
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore:startRoamScan(): 2843 Delaying RoamScan; because Join Mgr Busy 0 isWaitingforIP 1
Jan 11 16:14:29 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setCIPHER_KEY() [eapolclient]: type = CIPHER_PMK, index = 0, flags = 0x0, key lenght 0, key rsc lenght 0
Jan 11 16:14:31 Scoia-Aifone eapolclient[681] <Notice>: en0 TLS: authentication failed with status 1
Jan 11 16:14:31 Scoia-Aifone wifid[29] <Error>: WiFi:[347987671.532160]: Network WIFI3D Both autojoin and user join dates are NULL
Jan 11 16:14:31 Scoia-Aifone eapolclient[681] <Notice>: en0 STOP
Jan 11 16:14:31 Scoia-Aifone wifid[29] <Error>: WiFi:[347987671.542420]: Processing link event DOWN
Jan 11 16:14:31 Scoia-Aifone UserEventAgent[12] <Warning>: Unable to cancel system wake for 2012-01-11 16:14:18 +0100. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Jan 11 16:14:31 Scoia-Aifone eapolclient[682] <Notice>: en0 START
Jan 11 16:14:31 Scoia-Aifone Preferences[558] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0xde41320:<VPNBundleController: 0xde41320>): _serviceCount(1), serviceCount(1), toggleInRootMenu(1), RootMenuItem(1)
Jan 11 16:14:31 Scoia-Aifone wifid[29] <Error>: WiFi:[347987671.974798]: Processing link event UP
Jan 11 16:14:31 Scoia-Aifone UserEventAgent[12] <Warning>: Unable to cancel system wake for 2012-01-11 16:14:21 +0100. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setCIPHER_KEY() [eapolclient]: type = CIPHER_PMK, index = 0, flags = 0x0, key lenght 0, key rsc lenght 0
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANNetManager::handleDeauth(): status = 0, reason = 23, flags = 0x0, authtype = 0, addr = 00:3a:98:7d:ee:30
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANNetManager::leaveNetworkAsync(): kDeauthdCurrNetwork already set. Skipping call to leaveNetworkASync
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLAN Left BSS:       @ 0xc0bc4000, BSSID = 00:3a:98:7d:ee:30, rssi = -77, rate = 54 (100%), channel = 6, encryption = 0x4, ap = 1, failures = 0, age = 11, ssid[ 6] = "WIFI3D"
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setDISASSOCIATE() [wifid]:
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setASSOCIATE() [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA_8021X, key = CIPHER_NONE    , 802.1X .
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: [14602.222531083]: AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLAN Joined BSS:     @ 0xc0bc4000, BSSID = 00:3a:98:7d:ee:30, rssi = -77, rate = 54 (100%), channel = 6, encryption = 0x4, ap = 1, failures = 0, age = 12, ssid[ 6] = "WIFI3D"
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AirPort: Link Up on en0
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: en0: BSSID changed to 00:3a:98:7d:ee:30
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore:startRoamScan(): 2843 Delaying RoamScan; because Join Mgr Busy 0 isWaitingforIP 1
Jan 11 16:14:32 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setCIPHER_KEY() [eapolclient]: type = CIPHER_PMK, index = 0, flags = 0x0, key lenght 0, key rsc lenght 0
Jan 11 16:14:34 Scoia-Aifone eapolclient[682] <Notice>: en0 TLS: authentication failed with status 1
Jan 11 16:14:34 Scoia-Aifone wifid[29] <Error>: WiFi:[347987674.708487]: Network WIFI3D Both autojoin and user join dates are NULL
Jan 11 16:14:34 Scoia-Aifone wifid[29] <Error>: WiFi:[347987674.716635]: Processing link event DOWN
Jan 11 16:14:34 Scoia-Aifone UserEventAgent[12] <Warning>: Unable to cancel system wake for 2012-01-11 16:14:21 +0100. IOPMCancelScheduledPowerEvent() returned 0xe00002c2
Jan 11 16:14:34 Scoia-Aifone eapolclient[682] <Notice>: en0 STOP
Jan 11 16:14:35 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANNetManager::handleDeauth(): status = 0, reason = 23, flags = 0x0, authtype = 0, addr = 00:3a:98:7d:ee:30
Jan 11 16:14:35 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANCore::setCIPHER_KEY() [eapolclient]: type = CIPHER_PMK, index = 0, flags = 0x0, key lenght 0, key rsc lenght 0
Jan 11 16:14:35 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLANNetManager::leaveNetworkAsync(): kDeauthdCurrNetwork already set. Skipping call to leaveNetworkASync
Jan 11 16:14:35 Scoia-Aifone kernel[0] <Debug>: AppleBCMWLAN Left BSS:       @ 0xc0bc4000, BSSID = 00:3a:98:7d:ee:30, rssi = -76, rate = 54 (100%), channel = 6, encryption = 0x4, ap = 1, failures = 0, age = 14, ssid[ 6] = "WIFI3D"
Jan 11 16:14:35 Scoia-Aifone kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jan 11 16:14:37 Scoia-Aifone mDNSResponder[47] <Error>: DeregisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:F2CB:A1FF:FECB:ED60)
Jan 11 16:14:39 Scoia-Aifone UserEventAgent[12] <Warning>: Unable to cancel system wake for 2012-01-11 16:14:24 +0100. IOPMCancelScheduledPowerEvent() returned 0xe00002c2

I did see those screenshots however that settings screen comes from selecting the Configure button next to the Authentication Method in the User Authentication section under Users. In each of your screenshots, the RADIUS Server ID number is 1 so I would also ensure that I've configured RADIUS Server ID 1 which can only be configured by going to Users -> RADIUS Servers.
All that said, I did see that your tests succeeded and I also don't understand the point of having RADIUS settings on the other screens and then having RADIUS ID info. My thinking is that you would be able to configure RADIUS once in the Users -> RADIUS Servers screen and then select the RADIUS Server ID in all the remaining screens without having to enter the RADIUS info over and over again. It would also think that you could skip the Users -> RADIUS Server screen and enter the RADIUS information over and over again and it should work...just like you set it up originally. However, based on past experience of programmatic errors, I would recommend configuring the RADIUS Server ID 1 under Users -> RADIUS Servers if you haven't already...just in case.
Shawn Eftink
CCNA/CCDA
Please rate all helpful posts and mark correct answers to assist others searching for solutions in the community.

Iphone missing "mode" option in wifi WPA2-Enterprise

On my iPad 2, when I list the wifi networks and choose our WPA2-Enterprise network, there is a "mode" option to choose either Automatic or EAP-TLS.
On my iPhone, that option is not there which means I cannot use my Certificate.
Both devices are running IOS6.
The iPad 2 has version 6.0 (10A403)
The iPhone 5 has version 6.0 (10A405)
I need to connect to my wifi network using a certificate!
Any and all help is welcomed

Ok, my bad. I installed the certificate on the iPad and not on the iPhone. Hence, if there is no certificate, the "MODE" option does not come up. iPhones are smarter than me!

MAC OS 10.4.11 connecting to WPA2 Enterprise not permanently working

Hi,
I have an issue with the following environment. I will try to simply my wording to help understand the problem.
Hardware: Macbook Pro 17" Intel Core 2 Duo and Macbook laptops
Operating System: Both run MAC OS 10.4.11 fully updated (According to Apple Reps, this operating system is no longer supported)
Airport cards: Both have Airport Extreme cards. The Macbook Pro's card is using Firmware version 1.4.4 ( card type requirement to connect to WPA2 Enterprise network)
Connection type: Connected via PEAP (Inner Protocol:MSCHAPv2)
Wireless Access Point (WAP): Cisco Aironet 1142: Macbook connects to WAP to gain access to the Internet.
Cisco ACS version 5 server (validates macbook username and password entries to Microsoft AD servers.)
Microsoft Windows Server 2003 with Active Directory (holds user accounts)
Other Operating systems MAC OS 10.5 to MAC OS 10.7 (Leopard, Snow Leopard, and Lion make automatic connections.)
Basically, the process is that the macbook user enters in their email username and password into a WPA2 Enterprise wireless connection. The Cisco 1142 broadcasts the SSID for the user to connect to. Once the wireless connection is made to the Cisco 1142 WAP, the WAP sends the username and password to the ACS server. The ACS server verifies the username and password from the macbook to Microsoft Windows Server AD user accounts. If the password is validated, then the ACS grants access to the wireless Internet to the macbook user.
The wireless configuration involves the following process:
1. Click on the desktop, Go should be available now.
2. Click on Go, then Applications. The Applications window will appear.
3. Click on Internet Connect.
4. By default, The 802.1X connection is not available. We will be using the 802.1X connection to enter and save the username and password. Click on File and select "New 802.1X Connection."
5. A windows should appear. Under Configurations, select Edit Configurations.
6. An 802.1X windows will appear to enter in the following:
- Description: name of connection
- Network port: Airport
-User Name: domain\username or just username of email account
-password: password for email account
-Wireless Network: SSID of Cisco Aironet 1142 Wireless Access Point (WAP)
-Authentication PEAP configured with outer identity of anonymous. We uncheck TTLS, EAP-FAST, LEAP, and MD5.
7. Click Ok. Select Connect and it should connect to the SSID if the username and password are valid accounts.
8. Select File and then "Export 802.1X Configuration to login Window."
To verify connection:
1. We go to Apple - System Preferences and select Network.
2. The Airport should say that it is conected to the SSID. You are connected to the Internet via Airport.
3. Go a little deeper, we click on configure for the Airport.
4. Under By default join: select Preferred networks. Under network name, we should see the SSID connection. We select it and click on the edit button.
5. We verify that the connection has Network Name, Wireless Security, User Name, Password, and 802.1X Configuration entered in correctly. We select Ok after verification or modification. Then we select Apply Now to save any changes.
---------------------------------------------------------------The Problems---------------------------------------------------------------------
1. When shutting down the system and then turning it on. The Airport doesn't make a connecation to the SSID being broadcasted automatically. We would have to turn the airport off and back on for it to make an connection.
2. When the laptop is left idle or goes to sleep, the wireless connection drops. The user would have to turn the airport off and back on to stay connected.
Is there a fix for this?
Thank you to anyone that would take time to read this and provide helpful feedback.

The "v" key at startup is not Safe Mode. Try holding the Shift key down and restart for Safe Mode. This will disable extensions and help it start. It also checks some things out.
Can you start it up from your Tiger disc? Hold the C key down at startup until you see the Apple.
Your hard drive may be going kaput. Hope you have a good backup.

Lumia 820 WPA2 Enterprise

Hello,
I have one big problem. I can't reach wifi WPA2 Enterprise (Encryption: AES, Auth method: EAP (PEAP)).
It says: Connection unsuccessfull: Your phone couldn't reach the Wi-Fi network ...
But I'm able to connect WPA2-Personal, WEP. But that one in my school I can't
Other guys with WP8 can connect, also with androids and iPhones.
What I'm did? Factory reset and hard reset after. None of these help :/
Currently info:
Model: Lumia 820
OS ver: 8.0.10328.78
Firmware: 3047.0000.1328.3003 (Operator Plus PL SW variant)
Hardware: 1.0.0.0
Communication soft: 1.0.202132.3
I heard some people work with new Network+, my ver is: 1.3.2.1
Restored today!
Thanks for any help!

BUMP
New progress, I get log
here is log from windows phone 8 to cisco:
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID: SSAKHK\veteska.lukas
Account Name: veteska.lukas
Account Domain: SSAKHK
Fully Qualified Account Name: ssakhk.cz/####
Client Machine:
Security ID: NULL SID
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: 0014.f262.6300
Calling Station Identifier: 4c25.7894.01ac
NAS:
NAS IPv4 Address: 172.30.1.22
NAS IPv6 Address: -
NAS Identifier: aps320
NAS Port-Type: Wireless - IEEE 802.11
NAS Port: 15199
RADIUS Client:
Client Friendly Name: aps320
Client IP Address: 172.30.1.22
Authentication Details:
Connection Request Policy Name: Use Windows authentication for all users
Network Policy Name: pristup na wifi
Authentication Provider: Windows
Authentication Server: ####.ssakhk.cz
Authentication Type: PEAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 16
Reason: Authentication failed due to a user credentials mismatch. Either the user name provided does not map to an existing user account or the password was incorrect.
Password and user name is CORRECT!

Cannot connect to WIFI with WPA2 enterprise security

I'm currently trying to switch my Wifi from WPA2 Personal to WPA2 Enterprise using a dd-wrt flashed TP-Link router and a Synology Diskstation as the RADIUS server. The diskstation also creates the CA certificate which I can download from there for all client devices.
Configuration on the side of the router appears to be fine, I've entered all the details for RADIUS authentication and left "WPA Algorithms" at its default setting "TKIP", other options being ("AES" and "TKIP+AES"). I said it appears to be fine because my Android phone connection is established succesfully using the following (default) parameters:
EAP method: PEAP
Phase 2 Auth: NONE (also works with MSCHAPV2, and probably other options)
CA cert: unspecified (didn't download it to smartphone, must be fetched automatically from router I guess)
User cert: unspecified
Identity: myDiskstationUsername
Anonymous Identity: (blank)
Password: myDiskstationPassword
So far, so good... I still cannot manage to get a connection from my laptop running Arch. Prefered method would be via "wicd". The best match seems to be the following configuration profile:
name = PEAP with TKIP/MSCHAPV2
author = Fralaltro
version = 1
require identity *Identity password *Password
optional ca_cert *Path_to_CA_Cert
protected password *Password
ctrl_interface=/var/run/wpa_supplicant
network={
ssid="$_ESSID"
scan_ssid=$_SCAN
proto=WPA
key_mgmt=WPA-EAP
pairwise=TKIP
group=TKIP
eap=PEAP
identity="$_IDENTITY"
password="$_PASSWORD"
ca_cert="$_CA_CERT"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
But it's not working, both with and without specifing the optional path to the CA certificate. Any ideas what I could've been missing or any clues for debugging?
Last edited by saciel (2013-11-07 09:55:16)

Why don't you use netctl?
I'm using netctl to connect to my FreeRadius Server, and I use this config...
Description='A wireless connection using a custom network block configuration'
Interface=wlp0s29f7u3
Connection=wireless
Security=wpa-configsection
IP=static
Address='192.168.1.200/24'
Gateway='192.168.1.1'
DNS=('192.168.1.1')
WPAConfigSection=(
'ssid="SSID"'
'key_mgmt=WPA-EAP'
'eap=PEAP'
'phase2="auth=MSCHAPV2"'
'group=CCMP'
'pairwise=CCMP'
'identity="user"'
'password="password"'
'priority=1'

AppleTV in corporate, WPA2-enterprise wifi networks

Hello,
I would like to use AppleTV in my institution's corporate WPA2 secure wifi network, in order to mirror my iPad. I am looking for a stable solution.
iOS devices require the installation of a profile. I have tried to install a profie in an AppleTV (2nd generation). I don't think the profile "stuck". Should a profile stay in the AppleTV, would iOS devices "see" the Apple TV across the secure network? Also, I've read that the problem is that first time the AppleTV tries to connect to the internet, it tries to set date and time, and it remains in there in a loop unless it sets it from a wired connection (then, it can connect to the wifi network)
Another solution would be using an Airport Express to distribute dynamic IP's to the AppleTV and the iOS devices. But, can a WPA2-enterprise profile be installed permanently in Airport Express?
Linking the AppleTV or the Airport Express to ethernet (RJ45 cable) is not viable: those are fixed IP's which must remained assigned only to desktop computers. The solution must be wifi to wifi.
I would greatly appreciate any suggestions.
Thank you very much,
-celso

That depends on the settings in the network you're trying to connect to. You need to check with the administrator of that network.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

HT4718 would i be able to use the lion internet recovery since my college uses WPA/WPA2 Enterprise wifi?

would i be able to use the lion internet recovery since my college uses WPA/WPA2 Enterprise wifi? Im confused becasue this exact one is not listed under apples page about os x recovery.

Probably not. You'd need to go somewhere that Internet isn't on a locked-down wireless network.
See this for specifics. "It depends."
http://support.apple.com/kb/HT4718

Administrative credentials when adding a WEP/WPA/WPA2 Enterprise wifi profile?

Hello,
Why do users need to provide administrative credentials when they install a configuration profile containing installation of a WEP Enterprise or WPA/WPA2 Enterprise Wifi-profile? This is not the case when installing a Wifi-profile usning standad WEP, WPA or WPA2.
Is this a bug? It confuses users with user profiles when they need to confirm the installation with administrative credentials.

I don't know the answer to your question. Maybe you can find something here:
http://training.apple.com/pdf/WP_8021X_Authentication.pdf

Wifi w/WPA/WPA2 Enterprise

I have a strange issue. We are trying to connect iPhones to the corporate wifi network. This uses WPA/WPA2 Enterprise encryption with EAP-FAST authentication. I have created a Wifi Configuration Profile using the iPhone Config Utility v3.3. All settings look correct.
I install this config profile to an iPhone 4 and it cannot connect.
I install this same config profile to iPod Touch 2G and it does not connect.
I install this same config to iPad2 and it works perfectly fine. Connects every time no problem.
Apparently there is some difference in how the devices handle wifi security?!?
Does anyone have any insight into this?

Is the wireless network an "n" network?
If so, the iPhone 4 supports 802.11b/g/n Wi-Fi (802.11n 2.4GHz only).
No such 2.4GHz only requirement for an "n" network with the iPad.

My laptop is using Windows 8.1 and it can't connect to a WiFi using WPA2/Enterprise authenticate

I am using a laptop Dell Inspiron 15z with Windows 8.1 64 Bit OS. And i build a test lab to test WPA2/Enterprise authenticate.
My Lab is like that:
1/ My DC + DNS using Windows 2012 RC2 Standard.
2/ I install CA + Radius Server on DC Server.
3/ My AP WiFi is DrayTek AP810
After configed i can you use my iphone 5s (ios 8.1), my android phone (Samsung Galaxy), 1 laptop Windows 7, 1 laptop Windows 8 to test. And all of them can connected with no problem.
But my laptop using Windows 8.1 64 bit OS can't connected. After i choise the WiFi, it only show "checking network requirement"- not show the option question username and password. (and i config it exactly like laptop Windows 8).
I have tried find the answer on Google but nothing help me. (i have choise PEAP, install Certificate...)
Please help me guys. Thank you so much.

Hi,
About this issue, we could troubleshoot as the following methods on the Windows 8.1 client side.
1. Maker sure the "Automatically use my Windows logon name and password" setting on the client is disabled and on your client and type in the correct domain name when prompted.
2. If the issuer persists, delete this network profile in your Windows 8.1 client with commands and manually configure it as
this similar thread.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

IOS 5 WPA2 Enterprise WiFi Connectivity Issue

In IOS 4 i was able to connect easy to my company Enterprise network using WPA2 Enterprise (With Domain username and password). While initail Wifi setup in IOS 4 it used to ask me for accepting a certificate. After upgrading i noticed that it does not ask for certificate anymore but still connects on first attempt. After turining wifi off and on Wifi does not connects automatically instead if i check that network it ask me to enter password and join (my company network does not use preshared key instead use Domain credentials).
After googling i found out that from iOS 5 onward MD-5 signed certificates are no more supported. My network administrator is not interested in changing the signing method of certificate.
Can any one please help me for fixing this issue?

Hi Attiq 123,
Thanks for the question. It sounds like you are experiencing issues with your network connection, specifically when connecting to Apple services like iCloud and the iTunes Store. The following resource provides some troubleshooting steps that you can try:
Can't connect to the iTunes Store - Apple Support
http://support.apple.com/en-us/HT201400
You may also need to test to see if the specific ports on your Wi-Fi network are accessible:
iTunes: Advanced iTunes Store troubleshooting - Apple Support
http://support.apple.com/en-us/TS3297
Make sure the issue is with the iTunes Store only. (You need an Internet connection to access the iTunes Store).
Open a secure website to test if you are online as is necessary for the iTunes Store. This also tests if the main ports 80 and 443 are accessible. If the website works but the iTunes Store does not, it is most likely a firewall blocking the iTunes software or servers. If this is the case, follow the steps in the "Blocked by software firewall" section below.
- Matt M.

Not able to connect to wifi wpa2 networks in lenovo vibe x2

Not able to connect to wifi wpa2 networks in lenovo vibe x2. It displayed saved.but not connecting. It connects to open and WEP wifi networks. Please help

Are you trying to connect to a 2.4GHz or a 5GHz network?
What encryption is your router set to use : AES,TKIP/AES,..?
Have you tried to unplug the router from the power source for 2-3 minutes->Plug it back in-> Wait until it establishes an Internet connection-> Try to recreate the phone connection.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Support for WPA-Enterprise, WPA2-Enterprise wifi s...

hi all
I try to connect my phone to corporate wifi but failed because the phones hangs. my company uses WPA2-Enterprise wifi. my phone clearly works with WPA2-Personal wifi security at home. will these profiles of security be supported in future update?

Although this is the right section for this question, let us continue with your original post …

WPA2 enterprise, Can not authenticate with ACS

Hi, I am setting up WPA2 enterprise for wireless users with PEAP authentication, but can not get authentication server to authenticate them, and failed reason is generic "EAP-TLS or PEAP authentication failed during SSL handshake"
The AP I am using is 1240AG running 12.3(8)JA, Radius server is ACS 4.0, I don't have any problem to get dot1x with PEAP authentication working for wired access, and I have almost identical client side configuration for wired and wireless user.
From ACS's point of view, it should not be aware of any difference between wired and wireless user, but ACS log shows otherwise:
1)AP is connected to a cat4k switch, I suppose AP should be the authenticator for wireless users, but ACS "failed attempts" log for attempted wireless user shows that the NAS IP is cat4k in stead of AP, why?
2)I am using the same laptop for both wireless/wired testing, ACS "failed attempts" log shows that for wired user, it correctly interpreted cached domain\login name, but for failed wireless user, the user-name field is totally different, yet debug on AP clearly shows that correct domain\login has been received by AP.
Debug output on AP is attached, hope experts here can quickly identify the problem.

Got it working by adding radius server configuration under GUI generated configuration:
aaa group server radius your-AAA-group-name
server your-radius-server#1-IPaddress auth-port 1645 acct-port 1646

WiFi WPA2 Enterprise not workign

Similar Messages

Maybe you are looking for