IPhone question: when I receive a call from someone who is not in my contacts and I then decide to add that number to my contacts, is there a way to put it directly into a specific group?
After receiving a call on my iPhone 4s I decide I want to add their number to a specific group in my contacts using the "Create New Contact" option. When I do this it only is established in the "All Contacts" group. Is there a way to add it directly to a specific group?
hi, this thread already deals with the issue:
How can I prevent getting calls from number that are not in my address book?
Similar Messages
-
I have viber installed on my iPhone. But whenever I receive a call from Viber, it would not ring. How do I fix this problem? How do I make it ring with incoming call?
Bring your phone into Apple for evaluation
-
Can you increase the size of the photo that shows when you receive a call from a contact
Can you increase the size of the photo that shows when you receive a call from a contact ?
It used to be if you added the contacts photo on the iOS device they would have a large picture and if you added it from Address Book on OS X they would have a smaller thumbnail. However, since iOS5, all I've been able to get is the larger photo. Try adding the picture directly in the contacts app on your device. That should make it larger.
-
HT204380 How do I receive facetime calls from someone not in my contacts?
How do I receive facetime calls from someone not in my contacts?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
hi..I cant activate my Iphone 5. I bought this from someone who cant remember her apple password and even the email address that she used to set up the account.What am I gonna do now....How can I activate my Iphone. what are my options...pls help me.thank you
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
hannibalfromlemery wrote:
.I cant activate my Iphone 5. I bought this from someone
The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it. -
I recently bought an iphone 4s from people who are not in the know
and restore my iphone .. Now do not be in use for not having ID and password ... Owner apple owner just gave me a serial number how do I want to continue to use this ... Their telephone help me: (I am having same problem . i can not use the phone. my Carrier ROGERS checked the phone its not stolen or lost phone but after restoring always ask for apple ID of previous owner and seller is not responding to any mails or phone if some one can help me out than it will be great.
thank you -
Is there a way to put the cursor at a specific location in a RichTextBox?
Is there a way to put the cursor at a specific location in a RichTextBox?
The following code places the cursor at the start of a RichTextBox:
RichTextBox RTbx
RTbx.Focus();
TextPointer tp = RTbx.CaretPosition;
tp = tp.DocumentStart;
RTbx.CaretPosition = tp;
Not sure how to place it at a specific location other than start and end.
The RichTextBox has contents. At this point in the code, I do know the specific "word" in the contents, as well as the position (number of chars) where that word is located. I just need to programmatically place the cursor at that location.
bhs67Oh sorry, I see I missed something out my original reply.
I have markup:
<Grid>
<RichTextBox Name="rtb">
<FlowDocument>
<Paragraph >This is the first paragraph</Paragraph>
<Paragraph >TSecond paragraph is here</Paragraph>
</FlowDocument>
</RichTextBox>
</Grid>
Code - this is the window contentrendered event
private void Window_ContentRendered(object sender, EventArgs e)
rtb.Focus();
// TextPointer moveTo = rtb.CaretPosition.GetNextInsertionPosition(LogicalDirection.Forward);
TextPointer moveTo = rtb.CaretPosition.GetPositionAtOffset(9, LogicalDirection.Forward);
if (moveTo != null)
rtb.CaretPosition = moveTo;
I see the cursor between the t and he of the second "the".
Note that there are numerous other options such as the commented out line.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML -
IPhone crashes dialing or receiving a call from a specific number
This problem i've had for a while.
Basically when i receive or make a call to a specific number ie (0191420**) my iPhone becomes unresponsive with the green incall bar across the top when i make the call and a complete crash when receiving it, although it logs the call as a missed call when the iPhone is restarted. I cant end the call until i restart the phone.
Originally the number was a business contact in my address book contacts, then, when i started getting the problem, I deleted the contact thinking it was corrupt. It didn't make any difference.
All my contacts are synced over mobileme and this contact was deleted over all my devices, powerbook, iPhone and iMac.
But still when i dial or receive this number and only this number the phone locks up straight away.
It started on my iPhone 3G then when i synced my new iPhone 3GS the problems continued even over a complete restore.
I'm thinking its something to do with the contacts list file but don't know how to correct it with out deleting all my contacts which isn't an option.
I've searched all the forums but nothing is mentioned about this specific issue.Hi Macintoad,
I think I had the exact problem as what you are having. Having a greenbar on top while making call, and can not press any button, also the Iphone screen is blinking while a call is comming from that number and ontop of this, the contact name wont display on outgoing/incoming sms messages.
I did manage to fix it by doing this, hope this also works for you..
Backup all contact details to computer - address book.
Delete that specific contact detail (Hopefully you don't have too many contacts causing this problem - I only had 1 number causing this)from both your computer(s), and mobile me.
Add back all contact details from address book to your Iphone - I only add contacts, without any other settings (I had to reinstall all apps).
Add manually that number back to the phone, and then sync back to computer/mobileme.
Please let me know if this works...
Good luck! -
Okay so I barely use the calling/phone app (the one that comes on it) on my iPhone but most of the calls I get are from random people who I do not know who have the wrong number asking for the same people! I block them all I can but they're not always the same number there's different numbers all the time it's extremely annoying and driving me crazy, the one person left a voice mail again asking for the same person so I called them back and they denied they ever called I kept telling them I got a voicemail from that number and they kept saying no one called from that number. I literally cannot take this anymore. I remember seeing somewhere when I was setting up my phone where I can set it so people cannot call you if they're not in your contacts list. Is there a way to do that? If there is could you please let me know and how to do so? I seriously really need this please. I have an iPhone 4s that's on ios 7.1.2 if that helps any. Thanks so much.
hi, this thread already deals with the issue:
How can I prevent getting calls from number that are not in my address book? -
I need to know if this is a legitimate call as he asked me to pull the event viewer and it did show warnings and errors, he asked me to delete but they would not delete and then we was asking me to type a url to ping, in the run box, the pc, that's
where I stopped and asked for a return call number so that I could verify the authenticity of the call.Its
a scam. A well known and long running one. Microsoft will never ask for personal details (they already have them) and will never cold call you or send out anti virus messages.
Microsoft
does not do that nor do they have partners who do that
See
the following for additional information about this and what to do and how Microsoft operates:
http://www.microsoft.com/security/online-privacy/msname.aspx
answers.microsoft.com/en-us/protect/wiki/protect_other-protect_scanning/is-that-call-from-microsoft-a-scam/6718e389-8a00-4e4b-aca1-d07298ea4c19?rtAction=1405643984573
Wanikiya and Dyami--Team Zigzag -
Is there a way to insert comments directly into an Illustrator document so that every time you expor
I use Illustrator a lot to create website designs, and pepper the PDFs with comments on how everything should work. Is there a way to have those comments embedded into the AI so that I don't have to enter in the comments every time I export a PDF?
Template are the pre-designed document in which you do the modification as per the need.
this will give you better idea..
http://help.adobe.com/en_US/illustrator/cs/using/WS714a382cdf7d304e7e07d0100196cbc5f-6330a .html
So , you can create a template with the comment on it.
when creating the new file , base it upon the template so that you have the comment already present in the Ai. -
Is there a way to put the taskbar into the program window like in Windows XP?
Migrating from Windows XP to Mac OS X 10.8.2. The taskbar at the top of the page (not referring to the icons on the right) is unwieldy for my purposes. It'd be better to have it in the individual program (e.g. Word, Excel) window at the top of the page. Is there any way to do this such as 3rd party software?
Thanks.No. The Mac OS puts the app's menubar at the screen's top. There aren't any taskbars in this operating world. Since you're new to Macs, see these:
Switching from Windows to Mac OS X,
Mac Basics—Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mountain Lion Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac. -
My niece sent me a text yesterday with a photo of her baby. I responded to her but it went to everybody she had sent the initial text to. How do I just respond to her?
Okay than this definitely was not Apple. Apple support techs never have access to your mouse. It sounds like this company installed some software on your Mac. It is hard to tell what their intentions are but just assume in these situations that all your data was compromised. Possibly all your online accounts have been compromised such as social networks, banks, etc.. The smartest thing to do would be to change all of your passwords and reinstall OS X on your Mac. It sounds extreme but that's what happens when a 3rd party company gains control of your computer.
-Zeph -
Will this in any way effect my footage when working/exporting? I will be working off the same hard drive.
If all the footage played in FC to begin with and all the media is included in the capture scratch folder you should be good to go but I would check a few things.
Pull the new footage into your project and look under the compressor column. If any files are H264 or MP4 I would recommend converting these to a PR422 or another FC friendly format. Also confirm any audio only files are aiff/48Khz(not mp3 or 44.1Khz).
In my experience you can work with H264,MP4, mp3 & 44.1 in FC7 but you are almost guaranteed to have problems later. -
It was working properly for 9 months then suddenly it started showing me this error.
Resolve iOS update and restore errors - Apple Support
Maybe you are looking for
-
RH6 Extremely Poor Peformance with Lage Webhelp Project
We recently upgraded to RH6, which has caused performance problems so severe that we literally cannot work with the project. Our problems are exclusively with our largest project -- 600+ html files, 500,000+ words, 35mb (only about 150 small gif imag
-
How do I convert pages documents into a pdf format?
Many of the poster layouts do not save well as a ".doc" document. The formating gets all screwy. I have only the "pages" option or the ".doc" option for files under the "save as" dropdown. No professional printing services in my area offer the abi
-
Purchase Order required at PGI Level in the delivery
Dear Gurus, I am having the following problem: When I want to make Post Goods Issue at delivery level (VL01), the system prompts me for a Purchase Order Number. I have updated the stock in 2009 and I have checked that there are sufficient quantities
-
Connect new TV to existing box
Connect existing box to new tv
-
Can't get PSA SE 3.0 to close/exit
When I try to exit PSA SE 3.0 it brings up a small status window stating "Completing Pending Operations..." 20%. It never gets further than 20% and will not close the application. The application is not hung for I can click "Return to application" an