IPhone simulator and sound
I wrote an app that is supposed to make a sound when a button is pressed. Stepping through the code, the 'play' method executes, but I don't hear any sound. So, I downloaded the Metronome app from the ADC. Builds and runs fine, but I still don't hear anything. Is there some setting I haven't set?
I am using the 2.2.1 Simulator in both Debug and Release modes.
Any advice would be great. Thanks.
None that I've played with and I've tested all on my PC to see if they're worth messing with on my phone, so I'd know if they had sound. I've certainly not tested THAT many web apps though ... maybe 20 or 30? Anyone else?
Similar Messages
-
Install iphone simulator and interface builder
I have purchase new mac book pro . I got xcode in media but how can i install iphone simulator and interface builder..
some body can give me link for that.....
thanks in advance..Sorry, false alarm...10.5.3 failed to install properly prior to updating to beta 6 and as a result the SDK itself didn't install.
-
IPhone Simulator and Info.plist
I'm getting ready to release my new iPhone app, but I'm concerned because when I try to run my app with the .plist file checked to compile, it refuses to run (just closes before UI displays) and I can't seem to figure out why. I was also getting an error that the simulator "couldn't find com.----.----" (the identifier). Is there anything I should be aware of with the iPhone .plist files that can cause this? Is this simply an issue on the simulator? I don't want to have my app repeatedly rejected from the app store because the .plist file is screwing things up.
The plist shouldn't be set to 'compile'. Just use it as it came with the template and configure the plist itself. It shouldn't be added to the resources.
You have to make sure you have the bundle set correctly com.mycompany.myapp and make sure that relates to the provision. The icon name has to actually match an icon in the resources.
Is this simply an issue on the simulator?
Does it happen on the actual device? When it comes to the store that's what they will be testing it on.
If you haven't run it on the device then you shouldn't be submitting it yet to the store. -
SVG, although apparently noted as being supported in the docs, doesn't seem to work on the Simulator.
Check here with this simple webpage:
http://homepage.mac.com/davefriesen/iPhone/
Which works fine with the desktop Safari 3.1
Is there a way to check to see what version of Safari is actually running on the Simulator?I assume no one uses SVG?
-
os x 10.9.1
run the iphone Simulator and play sound in safari,
but nothing to happen.
i try to unplug headphone and increase the volume of the built-in loudspeaker, it works.
by now, i plug in headphones it works also.
i don,t no why?Hello all,
Has anyone figured out why this error is occurring? The odd thing about this is that I created an application yesterday using SoundEngine.h/cpp and it ran flawlessly then today, in a new app with the same files, I am getting this error and sound will not play.
The only difference between the two apps is that one uses Interface Builder and the other doesn't. Perhaps this is the reason there is an error and I'm going to try creating an app without IB and identical sound configuraion (using CrashLanding's SoundEngine) to see if this error occurs then.
In any case, any help is appreciated. -
How to play sound/text iphone app on a Mac computer at the iPhone simulator ?
I'm wondering if there's a way to play an app that I downloaded in iTunes written for iOS 3.2 and higher which only involves text/images and sound (no fancy accelerometer etc) at the iPhone simulator which I run on my Mac computer.
http://www.gadgettrak.com/products/iphone/
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
I have the iPhone 4. and when I updated the software to iOS6 My notifications don't make a sound anymore, the only sound that I get are text messages, or Email. I checked to see if the other apps were muted and they weren't. How do I fix this
You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
Unless you've iPhone 4S (looks similar to iPhone 4) -
I have an iPhone 5 and when i lightly tap on the back top part of my phone it sounds like something is rattling inside. Only on the top part of the phone, not on the bottom. I am wondering if anyone knows what this may be and should i have it looked at?
Definitlely have it looked at. That could be a hardware deffect on the maker(apple) so there could be a definite replacement option.
-
My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what can i do!???? Thanks a lot for help me!!!!
I have a nearly identical problem with my Ipad 3. Mine is the left channel. I've yet to find help, but have found a number of other posts on this and other forums discussing the issue. People have tried restore, reset etc. Also, cleaning the ports with compressed air or cotton swabs. It appears to be a software issue, but no one is sure.
Along with the original poster, I'd appreciate any help.
As far as the 'level 6' poster, if you're going to be rude, please don't bother. Hope it was just a bad day. -
Hi! I have an iPhone 4s and when I FaceTime the sound is really low. It´s really annoying. When I do phone calls it works, and on my MacBook Pro it works much better on FaceTime than on my phone. Can someone pls help to so solute this? Really need help! Thanks
This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
Try turning down the speak volume (System Preferences->Sound->Output->Output Volume) or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call. -
I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?
The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check. -
I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.
Recurring theme with the 4s losing alerts except for the phone ringing. Most complaints seem to center on the 7.1 upgrade. The fix is dodgy, putting in a charger, playing a you tube video then pulling out the charger and wiggling it until you get the sound back. When you get the sound back, the volume buttons start to work again. Alternate solutions involve cleaning the docking port with a toothbrush, running a pick over the electrodes etc.
-
I have an iPhone 4S, the sound quit working. I have sound in the headset and if I put the phone on speaker, I've reset to original settings, tried several options. Nothing works to resolve the options. Please help.
Hi there Wacjude,
I would recommend taking a look at the article below for some speaker and receiver troubleshooting steps.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Hope that helps.
Griff W. -
Using the camera and the iPhone simulator
I have tried this with the simulator:
isSourceTypeAvailable:UIImagePickerControllerSourceTypeCamera
and it always returns: NO.
This implies that it is not possible at the moment to use the camera in the iPhone simulator. Am I correct in this?
Note: In Java Mobile Edition, the mobile phone simulator gives simulated images and video to test camera functionality.To record video, you must first check that the camera source type (UIImagePickerControllerSourceTypeCamera) is available and that the movie media type (kUTTypeMovie) is available for the camera.
The code I added below:
if (UIImagePickerController isSourceTypeAvailable:UIImagePickerControllerSourceTypeCamera) {
But I traced the code and found that the if condition returns false. Does that mean I should run the app on the device not on simulator? -
I just recently purchased an iphone 5s and today my speaker located at the rear end of my device is not sounding clearly, it sound muffed and blurry. Is there any way I could get a new one or get this fix for free?
Hi Jayliin,
Take it to the Apple Store where you purchased it from. It is still under warranty. They will replace it if necessary.
Cheers,
GB
Maybe you are looking for
-
Microsoft one note error in opening
hi, i am facing probelm with one note, once i tap the icon it opens but shows an error message saying that "an error occured while opening your local onenote files. If you open onenote the file will be deleted and any notes that are not saved to a se
-
"Manage Your In App Purchases" link is missing
hey all, according to every documentation out there, i should be able to see this link .. here is what i did. i created an app in the iTunes Connect. uploaded my binary rejected the review process for the app. and now .. i'm stuck looking around for
-
To generate a restaurant bill using blue j.
To generate a restaurant bill using blue j. take 3 categories of items like punjabi chinese and continental. take 3 dishes for each category.enter the quantity needed and display the total. you can use methods like:- for,switch,while,do while etc. th
-
Can't select 'all layers' from the healing brush drop down menu
I just installed PS6 and while cleaning up a picture I found this very frustrating: I created a new layer on top of the one I'm editing and wanted to remove a couple of blemishes. but when I hit J and try to select the 'all layers' option from the dr
-
Personnel Number not yet assigned
Dear Gurus I was hiring an employee through transaction PA40. after entering details on first page the employee number was assigned but i did not save the entries due to change in plans. the issue im facing is that the personnel has been generated wi