Iphone4...got soaked, works after reset, now wont reactivate and shows error 0XE8000004

Hi all,
I have a 32gig iPhone4 that I purchased second hand. Recently I knocked it into the toilet...I turned it off straight away, left it to dry.
After 5 days drying I gave it a full charge, turned it on and the display was all sketchy. I've kept trying with it, realised that the display would function fine at times so have I put it in recovery mode, factory reset it and managed to get it out of recovery mode.
I'm back at a fresh start, however when trying to activate the handset via iTunes I keep getting the same error....'0xE8000004'
Can anyone shed any light on this error and how I can get this phone back up and running?
Thanks you in advance

Yes i've tried pretty much all of them steps, only thing I cannot try is another computer but to be honest I cant see any real reason it being my laptops fault as its been fine since day dot.
Not really sure which step to take next to be honest...any suggestions appreciated!

Similar Messages

  • Help please! My macbook air (2015) startup showed a folder with question mark so i tried "Command   R" for internet recovery but after few minutes it stopped and showed error.. Please hepl me!

    Help please! My macbook air (2015) startup showed a folder with question mark so i tried "Command   R" for internet recovery but after few minutes it stopped and showed error.. Please hepl me!

    Startup – Question Mark
    Startup Issues - Resolve
    Startup Issues - Resolve (2)
    Startup Issues - Resolve (3)

  • HT4623 I put my IPhone 4 to update but now is lock and showing error 3194, what my be the  problem?

    I put my IPhone 4 to update but now is lock and showing error 3194, anyone now what to do? please.

    Same issue, I hope someone on here can figure this out and share the information. I was on the phone with apple for over 2 hours trying to fix. I guess I have to make another call on Monday!

  • Itunes wont open and shows error report.

    this is what i get when i open it. it was working fine last night. i opened it and it said updating library, but then i played music without a problem. this morning i uninstalled quicktime cause i never use it. so i think that might have messed it up. so i uninstalled everything and reinstalled itunes 7.2 and now i get this.
    http://img118.imageshack.us/my.php?image=untitledra4.jpg

    iTunes uses QuickTime for audio and video playback. So it's best not to uninstall it if you want to use iTunes.
    When that message you're getting cites that "Offset: 10004000", almost invariably it's caused by a broken QuickTime. So let's try swapping that out again, this time applying some additional explicit precautions.
    head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

  • HT201363 After i wrote the wrong password for a few times my icloud account got disabled even after reseting my password.help

    After i wrote the wrong password for a few times my icloud account got disabled even after reseting my password.help

    Hi and Welcome to the Community!
    Failure of the BBID credentials will never wipe a BB. What actually happened was you incorrectly entered your user-created device-lock password too many times, and it then proceeded with wiping the device, as per the requirements of the security level accepted when enabling that feature. There is no way to stop it.
    Sorry.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    Click here and follow the instructions.
    (98897)

  • Itunes and windows 8 compatability Hi just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.  ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows 7

    itunes and windows 8 compatability
    Hi
    just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
    ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
    please assist
    adam

    itunes and windows 8 compatability
    Hi
    just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
    ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
    please assist
    adam

  • "A problem caused the program stop working," after I accepted the TERMS and Conditions for Adobe Reader 11 installstion. What I need to do next? Thanks.

    "A problem caused the program stop working," after I accepted the TERMS and Conditions for Adobe Reader 11 installstion. What I need to do next? Thanks.

    Thanks for your reply. I did get upgraded to 10. something. Not on that computer now. 11 is not supported on Vista
    Pat Willener <[email protected]> wrote:
    Pat Willener  created the discussion
    ""A problem caused the program stop working," after I accepted the TERMS and Conditions for Adobe Reader 11 installstion. What I need to do next? Thanks."
    To view the discussion, visit: https://forums.adobe.com/message/6442262#6442262

  • I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

    I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

    What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
    Tell us what network setup you are using..
    If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

  • Photoshop CC 2014 stops working after less than 30 second and shuts down

    I have installed and uninstalled Photoshop CC 2014 three or four times via Creative Cloud and each time it stops working after less than thirty seconds and shuts down the program. I then installed a an older version of Photoshop CS5.1 from a CD and it works perfect. I also have Illustrator CC 2014 and Lightroom 5 installed from Creative Cloud and both work flawlessly. What can I do to get Photoshop CC 2014 working?

    You have not provided any system information or crash logs, so we can't really know.
    http://myleniumerrors.com/working-with-your-operating-systems-tools/
    Mylenium

  • Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?

    I hope the title is enough info, please ask. In the mean time I have created an applescript to open preferences/ sharing and uncheck then check the file sharing box. This works but I would obviously prefer it just work normally. I have no corrupt preference files. Perhaps a file is missing? Thank you.

    Greetings Kwnez
    I'm not up to your level of expertise yet. I'm networking and file sharing too, on my Mac Powerbook 1.33 GHz PowerPC G4; OS 10.5.8 Lepoard. At the public library I found by asking the clerk a book Authored by David Pogue. "Mac OS X Leopard the Missing Manual". It (the book) has helped me ask better questions. I'm not saying that your question "
    Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?
    is hard for me to understand, I went to system preferences and looked at the sharing box. when I clik it it opens up and the first thing I see is my computers name, and under that i see, " Computers on your local network can access your computer at: ...-powerbook-g4-15.local"
    What I'm saying is "Are we on the same Page"

  • Mac got really slow after updation of os X and some application misbehaving and not able to open them.

    Mac got really slow after updation of os X and some application misbehaving and not able to open them.

    Apply the combo update
    http://support.apple.com/kb/DL1640

  • HT1386 My iphone wont sync and shows an error number (13019)... What does this mean???

    My iphone wont sync and shows an error number (13019)... What does this mean???

    http://support.apple.com/kb/TS2830

  • This is my iphone 4  ECID: ********, now restore or update showing error code 1 what can i do now?

    this is my iphone 4  ECID: ******, now restore or update showing error code 1 what can i do now?

    From the article:
    Error 1 means that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    1.Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    2.Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    3.Confirm that your security software and settings are allowing communication between your device and update servers.
    4.If you still see the error message when you update or restore, contact Apple support.

  • WHY DOES PAGES CLOSE QUICKLY AFTER OPENING A DOCUMENT .DOC AND REPORTS ERROR?

    WHY DOES PAGES CLOSE QUICKLY AFTER OPENING A DOCUMENT .DOC AND REPORTS ERROR?

    HAVE YOU UPGRADED PAGES, WHATEVER VERSION THAT MAY BE BECAUSE YOU HAVEN"T TOLD US, TO THE LATEST VERSION WITH SOFTWARE UPDATE…?
    AND WHY IS YOUR CAPS LOCK STUCK DOWN?
    PETER

Maybe you are looking for

  • XSL-TEXT: how to import subtemplates in XSL and use xdofx tags?

    Hi, I am working on a BI Publisher Report (XML Publisher 5.6.3 in EBS) to generate labels on a label printer. The output needs to be in plain text format, therefore I decided to use the XSL-TEXT template and create my own XSL translation. In principl

  • IMovies import from camcorder

    Camcorder correctly connected but the program does not start to import into imovies tried for hours and do not understand why. Same Camera had been used before successfully and I have changed nothing in the settings. it asks for event name but thats

  • How to shift Verical scroll bar from right to left??

    hi.. I have added a JTable to a JScrollPane. This adds a verical scroll bar to the right of my table. Now I want to have this vertical scroll bar added to the left of my table. is it possible? if yes then suggest how??

  • Use of Alternate BOM in Plant Maintenance

    Hi All, Please let me know the use of Alternate BOM in SAP PM. Sundar

  • Error REEXFI243 during periodic posting

    Hello everyone, I am trying to perform periodic posting for commercial lease-out contract and I get the following message: Cannot generate tax statement item for tax code V0 Message no. REEXFI243 Will appreciate for any suggestions. Thanks.