Iphoto crashes (hangs) when performing more than a few edits

To get this to go away, I have to either force quit iPhoto, or if it will let me, revert to original on the photo. This happens almost every time I try to use iPhoto. Any ideas as to what I might try to correct this issue?

iPhoto 9.2.1. 2gb Ram, 500gb HD, 500gb Time Machine backup drive, 350gb free space.
Actually, I think I might have fixed it. Rebuilt my iPhoto library, with all options, and it seems to be ok so far.

Similar Messages

Web Browser Session Hangs When Opening More Than One Query

Let me start off with the BW environment - we are on BW release 3.50 at support pack level 12. Basis component is release 6.40 at level 12.
We have a situation where a web browser HTTP session "hangs" while trying to execute more than one query at a time. A role based menu template is used by our end-users to run queries. The end-users execute a query and while it is running, try to execute a second query. But the web browser for the second query does not become available until the first query is complete.
The following is the detailed steps of the process:
1. From my user menu in BW, expand the folder for Role Z: BW_REPORTING and click on SAP_BW_TEMPLATE Web_Role_Menu. Web browser window will open.
2. Within the ZTPL_Role_Menu_Reporting web page, select Role Z: FUNC_DEVELOPER > BW Reporting > Controlling > Profitability Analysis > Detail query. (Role Z: FUNC_TESTER can be used in this example as well, just follow the same menu path). Click on Detail and another web browser window will open for the query selection screen.
3. On the selection screen for the CO-PA Detail query, enter values and execute the query.
4. While the CO-PA Detail query is executing, go back to the first opened web browser for ZTPL_Role_Menu_Reporting and go to Role Z: FUNC_DEVELOPER > BW Reporting > Controlling > Profitability Analysis > Operating Concern query. Run the CO-PA Operating Concern query while the CO-PA Detail query is still executing. The session for the Operating Concern hangs and does not display the selection screen until the CO-PA Detail query has completed. Once the Detail query has finished, then the second query, CO-PA Operating Concern will then display the selection screen for the query.
Our end-users expect the second query to display the selection screen immediately with no delay. The end-users do not want to wait for the selection screen of the second query. They want to be able to execute the queries simultaneously.
Our Basis group as tried adjusting some parameters and has implemented OSS note 853396, but the issue still exists.
Is it a BW issue or is it an issue with MS Internet Explorer?
Your input and suggestions are appreciated.
Thanks.

Hi.
I had a somewhat similar issue earlier when I tried closing BW Query windows, it would freeze and wouldn't close. I resolved the issue by turning off some BHO (Browser help Objects) in IE.It can be done using IE>Tools>Manage Add-Ons
Cheers
Anand

New rapport crashes CR when adding more than one table

Hello SAP Community Network Forums.
First post, so I hope I landed in the right place.
If I create a new rapport and add more than 2 tables to the rapport, CR shutdown. The following error is generated:
Event Type:     Error
Event Source:     Application Error
Event Category:     (100)
Event ID:     1000
u2026
Description:
Faulting application crw32.exe, version 11.5.12.1838, faulting module pgoe1024.dll, version 6.0.0.168, fault address 0x00018404.
a)     Installed a trial version of CR 2008. Same result.
b)     Using: XI 11.5.12.1838
c)     Running against a Progress 10.2B db. Updated with SP 4.
d)     Existing rapport is running fine (as long as no more than 1 table is added)
Any ideas/suggestions would be much appreciated. Regards, Lars.
Edited by: larsc-app on Apr 29, 2011 3:40 PM

Hi!
Are you using auto smart linking functionality of Crystal ? If so, try without auto smart linking with tables - works with me...
I think the bug is laying on the newest odbc-driver of OpenEdge, above few rows of readme file that game with openedge 10.2b sp05 :
Note: OE00205286    Type: Workaround
A file DSN connection to Crystal RDC fails with ODBC 6.0 Drivers
DataDirect ODBC 6.0 drivers can not handle the full path of a file DSN, causing
a connection to Crystal RDC to fail. Use the ODBC 5.3 drivers instead of 6.0
with Release 10,2B05 to work around this problem with the driver.
-> if you can, try to use older driver (pgoe23...)..
-Ari

Elements 6 editor crashes when opening more than 1 file

elements 6 editor crashes when opening more than 1 file

It may be a lack of available memory (RAM). Open the Editor and click the menu:
Edit >> Preferences >> Performance
Photoshop Elements >> Preferences >> Performance (on Mac)
You can increase the amount of RAM available to elements, but never go above 90% otherwise you will have nothing left for running other open applications.
You can also allocate other volumes or an external hard drive as scratch disks which elements can then use in place of a shortage of RAM.
Click to view

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File - Export - Album name with number).

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple?

Why does iPhoto (9.0/11) not retain the Event name when exporting more than one event? (using File -> Export -> Album name with number).
Exporting a single Event retains the Event name which is what I'd expect. But highlighting more than one event and exporting it renames the images to Events 001.JPG, Event 002.JPG etc.
I was recently on holidays and had all my events nicely split on Dad's computer but when I went to export it I couldn't retain any of this information. Now I have to replicate this all again on my computer.
It wasn't possible to export the entire library as the external drive was fat32 format an I didn't want all of it. It would be nice to export a bunch of events to someone and have it retain the name.
Does anyone have a work around or will this be fixed at some point by Apple?

IPhoto gives import error "file not valid" when import more than one photo

Trying to import lots of photos.
Every time I try to import more than a few, I get an error that "The following files could not be imported (they may be an unrecognized file type of the files may not contain valid data)."
When I go back to importing just one at a time, it works fine every time.
I have tried rebuilding the iPhoto library as well.
I have tried also not copying into the iPhoto library and copying into the iPhoto library (using Preferences/Advanced/Importing).
Any help would be great.
This is painful doing one-by-one, and each one I bring in shows as a separate event...
Every once in a while I will get lucky and it will import more than 5, though I will still get the error before it imports all selected. Ugh!

Unfortunately did not work.
And now a silly question - how do I get to be able to see my original iPhoto library? When I try to open it, I don't see any of the albums and mobileme galleries I had created anymore (though I can still see them on the web)

DOI - I_OI_SPREADSHEET, poor performance when reading more than 9999 record

Hi,
Please read this message in the [ABAP Performance and Tuning|DOI - I_OI_SPREADSHEET, poor performance when reading more than 9999 record; section and see if you have any advise.
Best Regards,
Marjo

Hi,
I met this issue when I tried to write vaule to massive fields of excel range.
And I solve this issue by using CL_GUI_FRONTEND_SERVICES=>CLIPBOARD_EXPORT.
So, I think you may fix it in the same way.
1. Select range in by the I_OI_SPREADSHEET
2. Call method I_OI_DOCUMENT_PROXY->COPY_SELECTION
3. Call method CL_GUI_FRONTEND_SERVICES=>CLIPBOARD_IMPORT
Cheers,

IPhoto crashed. When reopened, 70 some events were grayed out (no photos). Restored iPhoto library from Time Machine, fewer grayed events. Said yes to a msg on fixing library, 3K more photos. Still wrong. What next to do?

iPhoto crashed. When reopened, 70+ some events were grayed out (no photos). Restored iPhoto library from Time Machine, fewer grayed events. Said yes to a msg on fixing library, 3000 more photos. Still wrong. What next to do?

Do you still have the library that you were using when the crash occurred? If so apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

IMac (2008) OS10.6.8 - Main menu freezes when running more than one application at a time. Apple and 3rd party applications - all freeze the main menu. Safe mode seems to work OK. Tried repairing permissions - didn't work.

For the past 60 days I've experienced Main Menu freeze when running more than one application at a time. iPhoto, Preview, Text Edit, Epson Scan, Firefox and Thunderbird are the apps I use almost daily. No matter what I do, when more than one is running they will freeze the Main Menu (top of the screen). I've tried booting is Safe Mode and I don't seem to have a problem. I've tried several suggestions from repairing permission (DiskUtility) to eliminating specifis login items. Nothing works. I've posted this issue on the Apple forum several times and no one else has experienced this problem. I hesitate to take my iMac to the Apple Store or a private Apple repair service until I've exhausted all of my options. Do I have any more options?

Question: Everytime an app crashes I have the option to report it to Apple - which I usually do. But I've NEVER reported a Main Menu freeze because it never asks me to
There's really no need to submit to Apple, it's just a round file cabinet on the other end, especially with 10.6 or earlier.
This sure sounds like a resource problem...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?

With the new update of iphoto I can not upload more than 10 photos to Facebook

with the new update of iphoto I can not upload more than 10 photos to Facebook, I can do

I have the same problem. Why am I now only limited to 10 photos to share in Facebook thru my Iphoto in ipad? Also, i cannot create an album when sharing photos thru Iphoto in ipad. I used to be able to do this. I don't want to upload all my photos in IOS album. Was this feature removed from the Iphoto?

Rendering Error when using more than one DataSheetView on a Enterprise Wiki-Page

Hi Experts,
how to reproduce:
Add two Custom Lists with some Fields (Add Lookup-Columns to both Lists).
Add a DataSheetView to each List and mark it as Default-View
Create a Enterprise Wiki-Page
Add a WebPart (Custom-List-1)
You will see the Content from List 1 as DataSheet-View (because it is the Default-View)
Add another WebPart below the previous added WebPart (Custom-List-2)
You will see the Content from List 2 as DataSheet-View (because it is the Default-View)
Notice that the First DataSheet has faulty Rendering. The Lookup-Columns having more than one 'Arror-Down' Image and it is even on the left. If you click into different Column, different row you get the same.
I can reproduce this behaviour anytime.
Environment: SharePoint 2013 Enterprise, IE10
If you use Development-Tools to identify first datarow of first DataSheet you can see that it has to do something with the related <Input>-Tags:
<div class="combobox-placeholder" id="jsgrid_combobox" style="left: 27px; top: 32px; width: 117px; height: 29px; border-top-color: currentColor; border-right-color: currentColor; border-bottom-color: currentColor; border-left-color:
currentColor; border-top-width: 0px; border-right-width: 0px; border-bottom-width: 0px; border-left-width: 0px; border-top-style: none; border-right-style: none; border-bottom-style: none; border-left-style: none; visibility: inherit; ; direction: ltr; min-width:
117px; background-color: transparent;">
<input class="cb-textbox " style="width: 156px; height: 25px;" dir="ltr" type="text"/><input tabindex="-1" title="Dropdown" class="combobox-img" style="height: 29px;"
dir="ltr" type="button" value="▼"/><input class="cb-textbox " style="width: 84px; height: 25px;" dir="ltr" type="text"/><input tabindex="-1" title="Dropdown"
class="combobox-img" style="height: 29px;" dir="ltr" type="button" value="▼"/>
Please have a look into it. Current Workaround for me is to have a Default-ListView in first WebPart. But then Customer has to click the Edit-Button to Change the Item in the releated EditForm. This is a Show-Stopper here!
With Best Regards,
Ronny

Hi Ronny,
According to your description, the lookup column would render incorrectly when adding more than one datasheet view in the Enterprise Wiki page.
I tested the same scenario per your post, and I got the same results as you got.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay.
Appreciate your time and patience.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error using pretrigger when capturing more than one channel

I am having problems acquiring data with pretrigger samples when capturing more than one channel, using NI-PXI-6071E hardware and Labview's Analog Input VIs (Legacy NI-DAQ).
My goal is to trigger on one signal, while capturing another. Unfortunately, I cannot use the PFI0 for external triggering, as our cables/hardware have already been built, so I must use an analog input channel as the trigger. I understand that to do so I must capture both channels, and the channel that I wish to trigger off of must be the first channel in the list.
If I trigger and capture on the same channel (tried 1-4) then it
works great, regardless of the number of pre-trigger samples set. If I
capture more than one channel (passing the trigger channel first), with no pretrigger samples set, then triggering and capturing both work fine. However, if I do the same with the pretrigger sample > 0 I get the following error:
Error -10621 occurred at AI Control. Possible reason(s):
NI-DAQ LV: The specified trigger signal cannot be assigned to the trigger resource.
I don't se any such limitation explained in the user manual, and searching the forum, I have found a few other people that had the
same
problem
but they did not have solutions. Any ideas?
Solved!
Go to Solution.

I'm sorry for double-posting this. I was trying to post it in the DAQ board and it kept ending up on the LabView board.
If moderators have the ability to delete this thread you are welcome to do so.

Syntax issue when having more than 20 warnings

Hello,
when having more than 20 warnings in a compilation unit (package, procedure ...),
SQL Developer ( version 1.5.0.53)
doesn't always flag an error (like, for example, a misspelled local variable),
so instead of a compile-time error a runtime error is generated.
I tried to reproduce the situation and here is a simplified case where i've
encountered the same error.
Best regards
Alexander Andris, Prague
[email protected]
CREATE OR REPLACE
PROCEDURE PROC AS
l_arg1 pls_integer;
l_arg2 pls_integer;
-- declarations which issue PLW-07204 warnings ...( 20 or more ...)
cursor c1 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c2 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c3 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c4 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c5 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
cursor c6 is
select sysdate from dual
where trunc (sysdate) = trunc(sysdate);
procedure proc1 is
begin
null;
end;
BEGIN
l_arg_notdef := 42;
-- next line would not be displayed.
dbms_output.put_line (
'Error in SQLDev 1.5.0 - error on the assignment line not flagged '
|| ' by the compiler when preceded by > 20 warnings ...' ||
' (Error not shown in navigator.Same behavior also in SQLDev 1.21 ...).');
-- So, when lines 5 - 23 are commented out then line 31 is flagged as an
-- error (PLS-00201), otherwise not (runtime error only).
-- When working on a large package with more than 20 warnings and a lot of
-- code, to find an error like a misspelled local variable one would need to
-- a different IDE.Hope it is not difficult to fix this quickly ...
-- Details:
-- client platform: Windows XP
-- SQLDev: Version 1.5.0.53 Build MAIN-53.38
-- db.: Oracle 10.2 on Windows
END PROC;

Unfortunately, that's the intended behaviour.
After complaining about errors not being reported in previous versions, they did add the "Only first 20 issues are reported" warning, but unless you know that can happen, almost nobody will notice.
I keep advocating for reporting errors on top, next any warnings, until having used up the 20 spaces. If necessary, they could compile first with warnings turned off, then again with warnings turned on.
I don't think I ever put a request for this on the SQL Developer Exchange, so take a look there if you're up for it.
Also mind you can turn the warnings off yourself inside the preferences, so they won't bother (nor help) you again.
Regards,
K.

Startup issue when having more than one database on machine

Startup issue when having more than one database on machine:
I’ve installed two databases.
When I shutdown one of the database and try to start it up using
Startup pfile=’…location..’;
I get ora-12514: TNS: listener does not currently know of service rquirest in connect descriptor
when I try it again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn’t exist
Shutdown and Startup gave no problems when I had one database. Why am I getting problems when I have two databases?
I’m using: show parameter pfile|spfile; to make sure I have the right parameter locations, so the error shouldn’t be from location.
I’ve never installed two databases on one machine, so maybe I’m making a first-timer’s error.
Anyone know how to get this working, i.e. starting and stopping DB without issues?
Using oracle 11gR2 on Windows 7 64bit, all is working normal.
Thanks,
Ayman
Edited by: aymanzone on Jun 15, 2011 9:27 AM

aymanzone wrote:
my oracle_sid is set to the name of one of my databases
echo %oracle_sid%
shows me the name of my first database.
Still not working though.
When I start the services of both databases using Services, I can connect and run queries from both of the database.
Edited by: aymanzone on Jun 15, 2011 11:47 AMFirstly ... the Oracle Service for the instance should be started for the DB you are trying to connect or start.
Next ... from the command prompt:
set oracle_sid=<Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Now, if you want to start or connect to another DB which is on the same server (again assuming the Service is STARTED) ...
From the same command prompt session or other ....
set oracle_sid=<Other_Instance_Name>
sqlplus sys as sysdba
startup pfile='location of the respective db pfile'
Edited by: Srikanth on Jun 16, 2011 12:27 AM

My MacBook Air shuts down when its more than half way charged and won't turn on unless I plug it in to the adapter? Why is this happening and how can I fix it?

My MacBook Air shuts down when its more than half way charged and won't turn on unless I plug it in to the adapter? Why is this happening and how can I fix it?

If you really do have a Mid 2013 Mac Air model then it is still in warranty, as the standard Apple warranty is one year from date of purchase. So take it into an Apple store and have it diagnosed and fixed under the warranty. There is some type of hardware problem that only Apple can fix.

Iphoto crashes (hangs) when performing more than a few edits

Similar Messages

Maybe you are looking for