IPhoto says themes are missing and it won't print. All the support says to reload the application but I didn't get disks with the iMac. What do I do now.

iPhoto says themes are missing and it won't print. All the support says to reload the application but I didn't get disks with the iMac. What do I do now.

This is the ipod touch forum.
Try posting in the ipod nano forum.

Similar Messages

HT4848 Hi my name is Hajk and i got a friend that has a problem with her macbook, she gets a blue screen and cant log on. So i told her if she had an reinstall disk so that i could reinstall for her but she didn't get one with the macbook. what can she do

Hi my name is Hajk and i got a friend that has a problem with her macbook, she gets a blue screen and cant log on. So i told her if she had an reinstall disk so that i could reinstall for her but she didn't get one with the macbook. what can she do ?

If this is a fairly new Mac running either v10.7 Lion or v10.8 Mountain Lion she can use Lion or Mountain Recovery to repair the startup disk or reinstall OS X.

I have a HP 6600 and it says Error no toner and it won't print

I have a hp 6600 and it says error no toner and it won't print

Hello garylee1,
Welcome to the HP Forums!
I understand your Officejet 6600 states no ink cartridge. I will do my best to assist you! I would recommend following this entire HP document on A 'Cartridge Problem,' 'Ink Cartridge Failure,' or 'Incompatible Ink Cartridges' Error Message Displ....
Are you using Genuine HP ink cartridges? Please post your results, as I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

IPhoto 11 themes are missing

How do I get themes into my iPhoto 11? My iPhoto 11 won't print. I just reinstalled my iPhoto 11 and tried to print. It says there are no themes and it has to have at least one in order to print.

Check out OT's post in this thread:
http://discussions.apple.com/thread.jspa?messageID=6394288&#6394288
Also, note his comments here:
http://discussions.apple.com/thread.jspa?messageID=6998840&#6998840
> Look in your User/Library/Application Support/iPhoto folder for a Themes folder. If you find it there move it to the HD/Library/Application Support/iPhoto folder and reboot. Then try iPhoto again. That may save you having to go thru the reinstallation.
Regards
TD

W7 ult. HP 6500APLUS Aio says it's online and still won't print from computer

The printer says it's connected to network with num. address and full bars. Still it refuses to print anything I send from the printer. It worked excellent with no trouble installation, or during the last 9 mos. and then it decided, for no appartent reason, to just simply not work. I have installed, reinstalled, deleted and installed, deleted and reinstalled over 15 times. I have downloaded and used the diagnostic tools and dr. even more times, yet everytime I press the network button and go through the routine, it says "Connected to wi-fi" BUT when I send a doc to be printed, nothing shows in the what's printing dialogue and nothing gets printed.
The pc is directly connected to the router; nothing's changed. My MAC "sees" the printer and prints so I have to go all through the steps on it to get to the page I want printed . This is awful. What happened to HP? You used to be the best in the business and the last 3 lousy printers I've had to junk because they refuse to print. Help me, please.
Fernando Gomez

Hello doenCS,
Welcome to the HP Support Forums! I see you have your HP Officejet 6500A Plus connected to your wireless network, however when you attempt to print nothing happens, you do not see it go into the print queue and it never prints. I see you have done alot of troubleshooting already, I would like you to continue below I know you have done many uninstalls please try this approach :
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and run the HP Printer Install Wizard for Windows it was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HT1267 While upgrading my iPhone 3 to 4.2 something went wrong and would not start at all. When tried to restore after going through th process it comes up with the message "The iPhone could not be restored. An unknown error occurred [1015]." What can I d

While upgrading my iPhone 3GS to iOS 4.2 something went wrong and came up with the message "The iPhone could not be restored. An unknown error occurred [1015]." Now it will not start at all. It just stays on screen with USB and the iTune picture. What can I do to get it going again. I only tried to upgrade because I was prompted to up-grade and now I am helpless. I did a backup before starting the upgrade. The error message did not tell what to do next. Any help is very much appreciated.

Usually that means the iPhone was hacked to unlock it from the original
carrier .
Updating the operating system locks it back to that original carrier
You could try this
http://support.apple.com/kb/TS3281
However if the iPhone was hacked it is probably a paper weight now
and as this is an Apple hosted forum you can get no further help here

Reformatted R15 with XP, now drivers are missing and internet won't connect

Hello!
I obtained a Satellite R15 without recovery discs. I kept telling myself that I'd make a set but never got around to it. Recently, I began having problems with my MSOffice 2007 software. I tried to uninstall and reinstall but the files were corrupted and it didn't work. My next step was to purchase the Windows XP tablet edition operating software. I reformatted and installed the software. However, I had to reinstall it 3 times before I was able to get it actually reformat my hard drive. The new system is missing the help center for some reason and was also missing drivers. I went to the Toshiba download center and I downloaded every possible driver/program I could need for an XP operating system and installed them all. Some of them would not work because they wanted to connect to the internet. Some of them did not work because I'm missing an "rpc driver" . I also installed service pack 2 for XP but not service pack 3 because I don't have an internet connection. Initially, the modem, ethernet, sound, video and a few things did not have drivers. Now I have drivers for all of them except one - seems to be for shock absorption software and I can't find it anywhere. I need help.
1. I still cannot connect to the internet either through an ethernet or wireless
2. I'd like to have a help center again - I use it once a year or so, but it's nice to know it's there
3. I am still not able to install MS Office 2007
4. I'd like to get that software for the shock absorption.
Any advice would be much appreciated!

Is the HDD ok? I would run the Advanced test in Hitachi DFT to ensure is has no bad sectors.
Install the "Toshiba HDD Protection System" driver from the Toshiba website. Common Modules needs to be installed first, its very important.
Is the Office CD scratched? Does it work in other PC's?
Ultimately, you would want a Toshiba Recovery Disc, that way you can be sure the drivers are all installed properly. I believe you can get replacement discs from Toshiba.

I've downloaded a trial version of creative cloud and photoshop but how do I get started with the trial?

I recently downloaded a trial version of photoshop but I can't find a simple enough way to start it. I'm signed in but when I press the "get started" button it brings up the purchase options. I just want to run the trial for now. Any ideas?

Jacobm51486856 please see Sign in, activation, or connection errors | CS5.5 and later for information on how to resolve the connection error preventing your membership from being authorized.

ITunes won't launch after upgrade - says files are missing

I had trouble upgrading to version 6 but disabled my anti virus software (McAfee) and the upgrade seemed to run OK. After restarting my computer iTunes won't run as it says files are missing and I need to install them. It was all working fine before. I have over 4200 tracks and I'm worried I've lost them although they are all still on my iPod. What do I do next? Please help.

Sorted! Panic over. I ran the download again and everythin seems OK.

Composed looks / Change the look themes are missing when creating site from saved template

Hi,
I found an issue when save you own site template and then want to create a new site from that template the "Change the Look" themes are missing and if you go to site settings, Comosed looks where the themes are stored is empty! Anyone else has
the same experience? Any workaround for this?
regards
Martin

I've just seen this exact problem on a SharePoint 2013 farm as well this morning, but have managed to fix the blank "Composed Looks" list issue, although am still working on the "Change the look" wizard pages.
Edit: found a fix for this too now. See my next post below.
It appears that the process of saving a site as a template and then creating a new site from that template causes the original XsltListViewWebPart used to display the default view of the "Composed Looks" list, to be replaced with a ListViewWebPart,
which appears to be broken.
Edit: have also seen this behaviour on sites created from the built-in templates but haven't determined exactly whether this is a bug. ULS logs never show any errors when this occurs so it appears to be "by-design". Ugh.
There may be a tidier way to fix this, but for now, I used SharePoint Designer 2013 to copy an XsltListViewWebPart from a working "Composed Looks" list, AllItems.aspx page and replaced the ListViewWebPart in the broken Composed Looks list, AllItems.aspx
page with it. There is also some additional post copy-paste tidy up to do on the pasted-in XsltListViewWebPart HTML to get it to work within the context of the site it is now in as it will contain GUIDs and URLs that are only relevant within the site
that you copied it from and these need to be replaced with the GUIDs/URLs from the replaced ListViewWebPart - paste it in a notepad session before deleting/overwriting it so you can grab those bits.
I'll write a more detailed step-by-step if anyone wants it, but this doesn't seem to fix the broken "Change the Look" wizard still, only the "Composed Looks" list default view. I'll look into that now and post back more complete solution if I can
find a fix.
Edit: Found a fix. see my next post below.
Edit Edit: One more thing - on some Composed Looks lists we are seeing empty lists once the default view webPart is fixed up. To correct this, you can copy selected Composed Looks from a working site with a full set.
Before you do that, edit the default view in both the source and destination Composed Looks lists and include the Title field as it is a required field.
Then, you can use Datasheet View (just click the edit list link to put it in Datasheet View mode) to bulk copy/paste Composed Looks between the source and destination lists.
Do a little post-paste tidy up on the URLs as above to make sure that they are correct for their new location and then click on over to your Change the Look wizard.
You should see all of your Composed Looks displayed nicely on the page.
Note that the Current Look might not represent the sites actual appearance as it's settings will reflect the source sites appearance, but you can tweak it with the Wizard now.
Regards,
Glenn
Can you confirm your sharepoint patch level?

TS2446 Fuc!!!!!!!! Yahoo disabled my Yahoo email address as there had been a breach is security. So I could no longer buy apps or update. I created a whole new Apple ID. But my iPhone still comes up with the old email address and I can't seem to get rid

I'm ready to stop using itunes the ID change of email address is killing me! Help

Well, your first mistake was making a new Apple ID. You only needed to go into Manage your Apple ID and change the Apple ID from the Yahoo email to your new email. Then, all the purchases you made with that old Apple ID would still be tied to your updated Apple ID.
As it is, you now have a totally new Apple ID, but the purchases you made with that old Apple ID are still (and will forever be) tied to it.
Your best bet is to log into Manage your Apple ID with the old ID (regardless of what Yahoo did with it, it is still a functional Apple ID, unless you had that disable for security reasons). Once you have logged into it, change the password on it to match the password on your new ID. Then when you are asked for a password to update an app, it won't matter which of the two Apple IDs is displaying. You will just type in the same password and your app will be updated.
Cheers,
GB

Some photos in iphoto are missing and there are blank thumbnails which when i try to open them show an exclamation sign

some photos in iphoto are missing and there are blank thumbnails which when i try to open them show an exclamation sign

The exclamation make is an indication that iPhoto has broken the file path to the original photo.
Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I installed PS CS 6 and now all my iPhoto 11 pictures are missing.

I installed PS CS 6 last night and now all my iPhoto 11 pictures are missing from the library. I had 45,000 plus pictures and some of them were not backed up. I have tried holding the command and alt keys down while starting iPhoto several times but no luck. Does anyone have any idea how I can recover these photos?

Don't see how installing CS 6 could do this.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system som

I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system some how. How can I retrieve these images? Is there a re boot for lightroom? Need help ASAP!

You have probably moved the files outside of Lightroom. The images you see in LR are previews that were made before you moved the files.
Do a search for the files/folders using your computers operating system. (Explorer/Finder)
Once you have found them, you can point LR to the right location.

HT1386 Because of limited internet on my iphone 5, i download updates to apps thru ITunes and then sync them to my iphone. Lately, the apps download properly and the sync seems to go thru, but on my phone, they keep saying they are updating and it never

Because I have limited internet package on my att iphone 5, I update apps on my computer thru ITunes and then sync them to my phone. The downloads seems to go thru and then install. But when I turn on my phone, the affected apps continue to say they are updating and it never goes away. I do not have wifi but when I am connected, the apps don't update. Help!!!!

Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck!

IPhoto says themes are missing and it won't print. All the support says to reload the application but I didn't get disks with the iMac. What do I do now.

Similar Messages

Maybe you are looking for