IPhoto update but not to 9.5.1

I have an old version of iPhoto (7.1.5) which is no longer supported for making books, etc. I would like to upgrade to a more current version but am still on 10.8.5. Is there a way to upgrade my iPhoto but not to the most current version?

Purchase an iLife '11 DVD - Amazon or eBay are potential sources and install iLike '11 form it and update to the lateest version for your OS - 9.4.3
LN

Similar Messages

IPhoto will not initiate. Downloaded update, but not change. Any help out there?

iPhoto will not initiate. Downloaded update, but not change. Any help out there?

If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

HT4623 i just updated my 3gs 4.3 t0 6.1 its updated but not activate plz help

i just updated my 3gs 4.3 t0 6.1 its updated but not activate plz help

Do you get an error message.
Was your phone ever locked to a different phone carrier?
When you can't activate, usually means your phone was hacked or jailbroken to unlocked it, then when you updated the IOS it locked back to the original carrier.

Got the OS 7.10.8107.79 update but not the firmwar...

Hi..
I have a small question..
I got the OS 7.10.8107.79 update but not the firmware update... my Firmware is stil 1600.2479.7740.11451 How can I get the new firmware????
Thanks in advance

@billstrom
They don't have to be scheduled to appear together!
Happy to have helped forum with a Support Ratio = 42.5

I can't load pictures to online site... Iphoto works but not aperture. I have edited photos that i exported to an external drive but they will still not load to Walgreens for printing. Does anyone know what I can do?

I can't load pictures to online site... IPhoto works but not aperture3. I have edited photos that I exported to an external drive but they will still not load to Walgreens for printing. Does anyone know what I can do?

Are you shooting RAW? Are you exporting masters or versions? Is there a size limitation on the Walgreens site?

I have an IPhone operating OS 4.21. I cannot back it up before update and I cannot set up an ICloud account as it needs to be on a version later on the device. Please help, I want to update but not lose everything!

I have an IPhone operating OS 4.21. I cannot back it up before update and I cannot set up an ICloud account as it needs to be on a version later on the device. Please help, I want to update but not lose everything!

SorchaH wrote:
I receive an error "Itunes cannot back up the IPhone because the back up cannot be saved on the computer".. So I tried to download and log into ICLoud but need to do this from my device..
That would tend to indicate a permissions issues on the computer.
Running an outdated version of iTunes is of absolutely no benefit.
All iDevices work with the current version of iTunes.

Photo stream is showing up in iphoto recent but not web and I am not able to join the shared photo stream. all of my software is updated. can someone tell me how to get photo stream in the web source list? thanks!

Can someone help me get Photo Stream to appear under Web in the iPhoto Source List? I have updated all my software. iPhoto 11, Mac OS X 10.7.5 All of my preferences are checked. I am able to see the shared Photo Stream on my iPad, but not my Mac. The Mac iPhoto photos from the shared photo stream are appearing in the Photo Stream (under Recent), but I thought they would appear as a shared Photo Stream in its own file/album (like on the iPad and iPhone) - labeled with the shared Photo Stream's title. Is this supposed to happen on the Mac? Thanks!

So you are saying for it to do what i want: shared photo stream to appear in web then i need to upgrade.
Yes
Does that mean i purchase the new software an it's not just an update?
Yes
Your profile indicates your running 10.7.5. For shared Photo Streams you need to be running 10.8.2 or later: The following is from iCloud: Photo Stream FAQ
What do I need to use Photo Stream?
To use Photo Stream, including Shared Photo Streams, you need an iCloud account, compatible devices, and up-to-date software: iPhone, iPad, or iPod touch with iOS 6.0 or later Mac with OS X Mountain Lion v10.8.2 or later and iPhoto 9.4 or Aperture 3.4 or later
So you'll need to upgrade to Mt. Lion.
iPhoto requirements are free updates for iPhoto '11
LN

IPhoto updated but now I can't open iPhoto at all

iPhoto was installed on my MacBook Pro when I purchased it in Sept.(Along with iMovie, iTunes, etc.) I was having problems with editing some of the photos (it wouldn't open up in the edit screen) so I decided to update it. I downloaded the update and installed the "updater". Said the install was complete. However, now when I try to open iPhoto, it says "You can’t open your current photo library using this version of iPhoto. You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto." However, I can't find how to open the newer version. It installed it to the HD but it's not an executable file. It's just the update installer.
I am running the current version of OS. I am wondering how to get back to the original version of iPhoto that I had. Is this possible?

When you updated iPhoto what you downloaded was a bug fix patch for iPhoto 08. You cannot upgrade to a newer version (i.e. Iphoto 09) without purchasing the relevant iLife disk.
This is how you reconstruct a Library:
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

10.6.8 in software updates but not installing

I am having issues with installing software updates for my iMac. I had to manually download and install the 10.6.7 update (I chose the combo) from the apple site. It shows that the update is downloaded in my software updates but it will not install before or after restart. I was successul at installing the 10.6.7 combo, but now I am having the same issue with 10.6.8. I did download the update combo from the apple website, but when I try to install, I get an error stating "The installation failed. The installer could not install the software because there was no software found to install." I am a newer (1-2 years) mac user so I'm having issues finding solutions.
Thanks in advance.

appologize in advance if I have posted this in the wrong place ... I am a newbie

Video (mov) in iPhoto 8 library seen in iPhoto 8 but not iMovie 8.

After installing iLife 08, I can see my photos and videos in iPhoto 08, and the videos (mov from Kodak V570) play fine in QT. However, in iMovie 08, I cannot see all of my videos in the event library (though the manual leads me to believe I should be able to see them). I can see some of my videos (the ones that I had on the computer when I installed iMovie 08). I cannot see any video that I imported into the iPhoto library after initial install from within the iMovie 08 event library. If I try to import the video, all of the video files within the iPhoto library are grayed out. I can import the videos (mov) just fine into iMovie06.
Much discussion on this topic within the iMovie08 forum. No solutions, though. A person suggested that the topic be raised in the iPhoto forum, since the iPhoto library in iPhoto08 is the library for iMovie08. Appreciate any help.

I have exactly the same problem as well... I upgraded from iMovie HD to iMovie'08. I can only see one video clip from my iPhoto library but I have over hundreds of these clips... not sure why. I am using *.AVI video files.

When apps in AAM list are listed as updated, but not installed.

When viewing the apps list in AAM the programs PS, AI & ID are listed as updated, but I do not have thr CS6 versions installed. Can you inform me on how to get the current versions installed?

Run the Creative Suite Cleaner Tool and let AAM install the programs.
Mylenium

Clients receiving updates but not reporting

Hi All,
I'm having an issue where all Windows 8.1 clients are downloading updates just not reporting back into my console. This seems to be happening since I upgraded to Windows Server 2012R2 (from 2008R2) and created a new WSUS implementation.
The Windows Update Fix-It does fix the issue but this is happening on 50+ pcs and I really need to be able to silently deploy a fix to them. I'd also like to know what caused it so it doesn't happen again. I do have 1 or 2 Windows 7 machines this
happens on, but 99% is on Windows 8.1. I've tried manually fixing based on the Fix-It findings but nothing I have done so far has worked.
Does anyone have any ideas where I should start?
Here are the Fix-It Issues Found:
1. Service Registration is missing or corrupt.
       Reset service registration
2. Windows Update erroe 0x8007000D (2015-04-20-T-09_02_15A)
       Resetting Windows Update data store
3. Problem installing recent updates
       Repair Windows Update
I believe #3 is caused because I use WPP to publish Adobe Flash Player. I do not have my 400+ PCs segregated by OS, rather by departments. So Win 8 machines get Adobe Flash Player WPP updates and constantly fail. I have thought this might be an issue.

Thank you, this does seem to be one of the issues with my sysprep'd machines. I am a quite confused as to why the SUSid is not being reset upon sysprep. When I build these images they are not on the WSUS either.
I am also not in a domain environment. I am running a script which manually sets the following,
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate]
"WUServer"="http://x.x.x.x:8530"
"WUStatusServer"="http://x.x.x.x:8530"
"AcceptTrustedPublisherCerts"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU]
"AUOptions"=dword:00000004
"DetectionFrequency"=dword:00000004
"DetectionFrequencyEnabled"=dword:00000001
"NoAutoRebootWithLoggedOnUsers"=dword:00000001
"NoAutoUpdate"=dword:00000000
"RebootRelaunchTimeout"=dword:000000f0
"RebootRelaunchTimeoutEnabled"=dword:00000001
"RescheduleWaitTime"=dword:00000014
"RescheduleWaitTimeEnabled"=dword:00000001
"ScheduledInstallDay"=dword:00000000
"ScheduledInstallTime"=dword:0000000b
"UseWuserver"=dword:00000001
"AutoInstallMinorUpdates"=dword:00000001
Tech support also said that I should be enabling ,
Computer Config > Admin Templates > Windows Components > Windows Updates
1. Configure Automatic Updates (enabled and set to 3)
2. Specify intranet Microsoft Update Service Location (set to enabled and my WSUS IP)
3. Automatic Update detection frequency (enabled)
Resetting the susid seems to work for some clients and then the GP edit seems to work for others.
I do have to remove the client from the WSUS console before resetting the susid or it will not work.
Now I am concerned I have something wrong with my sysprep'd images. However, even some out of the box from a store machines are not reporting. It's perplexing.

[SOLVED] Unrelated Issue - AUR PKGBUILD updated, but not 'pkg'.tar.gz

Hi all,
I noticed that qbzr had become unmaintained and in fact wouldn't install via the AUR PKGBUILD file as the source download link had become obsolete.
I took ownership of the package, then downloaded, updated, targz'd and submitted the new archive. However, it still doesn't seem to be quite right.
If I download the PKGBUILD , I can now makepkg and then pacman -U without trouble. (v0.18)
However, using yaourt - yaourt gets the version info etc from the PKGBUILD file I think, as it displays the intended version correctly (0.18). However it then downloads qbzr.tzr.gz, within which is the PKGBUILD file of version (0.16).
I feel I must have missed something, but I can't figure out how when I submitted qbzr.tar.gz AUR was able to correctly extract the PKGBUILD file for display but not provide the correct qbzr.tar.gz
Perhaps there is a lag in file propagation that I have been previously unaware of?
Cheers
Last edited by thread (2010-02-08 03:28:35)

thread wrote:However it then downloads qbzr.tzr.gz, within which is the PKGBUILD file of version (0.16).
there's nothing wrong with the tarball, so i'm not sure why you think it's not an issue/bug/problem/etc with yaourt..
$ wget http://aur.archlinux.org/packages/qbzr/qbzr.tar.gz
$ bsdtar xf qbzr.tar.gz
$ grep ^pkgver= qbzr/PKGBUILD
pkgver=0.18
Last edited by tdy (2010-02-05 05:04:08)

IPhoto update will not accept my apple ID

Trying to update iPhoto. Will not accept my Apple ID and password. They are the only ones I have. Help.

You can try to drag your iPhoto Application to the trash (do not empty the trash yet) and see if it will install from the App store - if it does not contact App store support from the link on the right of the app store window
LN

Iphone syncs to iphoto first but not detected by itunes

I know this is common. But when I plug in iphone4s with usb. it goes straight to iphoto and is detected but not to itunes.

Hey sergioll,
Thanks for the question. I understand that you are experiencing issues with your iPhone 5 not being recognized in iTunes for Windows. The following resources may provide a solution:
iOS: Device detected but not identified properly on iTunes for Windows
http://support.apple.com/kb/ts2818
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

IPhoto update but not to 9.5.1

Similar Messages

Maybe you are looking for