IPIVR 8.0 port usage and monitor

Hi All,
Couple of queires related to UCCX 8.0:
•- Is it possible to set an alert (email notification) if a set threshold of port usage is reached; so I can immediately come to know that the ports are about to exhaust
•- Is there any report / way to find out peak utilization of ports for given day / time interval. I know there is a historical report in Webview to see port utilization, but it gives average percentage of port utilization. So say if port utilization has reached peak for one minute in 30 minute interval; average percentage will be less than 100%.
Thanks in advance.

Hi,
first, about that email alert: some assembly required.
You can do it the "polling the realtime tables" way or the "have each script check" way, or the "IP IVR Default script" way.
Polling realtime tables: write a simple script which takes a look every now and then (for instance 5-8 seconds) at the Network_Trunk_Group_Real_Time database view. There is a couple of columns to watch, for instance: AllTrunksBusyToday, CallsInToday, CallsInNow. If a threshold is met, send an email.
The second option: use an If node in your ICM script to check for the same/simliar values, from the NetworkTrunkGroup section. If a condition is met, have IP IVR (or an Application Gateway Application) send your alert.
The third option: for the Translation Routing application in UCCX, configure the maximum number of sessions to the number of ports available for that port group. Configure a default script for that application that sends an email. So any time the maximum number of sessions threshold is reached, the default script will be run and send your alert.
About historical port usage: again, take a look at the database schema. For instance, Network_Trunk_Group_Half_Hour.
G.

Similar Messages

T430s w port replicator and monitor question

Runs fine and please with it. Is it possible to close the T430s and still use it? What do I need to do to run the desk monitor and close the T430s? Seems I should be able to do so. Thanks for your help and time. klm

what OS are you using?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

CVP - VXML ports / application Utilization Monitoring

Hi,
I would like to see if we can monitor VXML port / application Utilization in CVP (the exact ports usage & also monitor on which application how many callers are) thru SNMP or any other options that can be used for tool based monitoring rather than running status.bat file in the CVP root folder manually.
Total Concurrent Callers: 672
License Ports: 1550
Available Ports: 848
Application Name            Status     Active Callers   Sessions Ending
CSM                         Running    0                0
BillingQueue                Running    0                0
CallbackQueue              Running    0                0
HelloWorld                  Running    0                0
Is there any API available to achieve this ? Please suggest
Thanks,
JP

Chintan,Thanks !
We have few OID's in the Cisco-CVP-MIB, which would give us the port utilization statistics but i do not see anything pertain application level statistics.
Yes, we have an option to write power-shell script a call the status bat file and log the data for reporting. However this seems to be performed by only within the CVP server. I mean, the script can be executed locally in CVP servers and not remotely ?!
Am looking for an option that can be used remotely from the third-party monitoring tools ! Any ideas, please ?
Thanks
JP

How to connect an external hard drive and monitor a single port thuderbolt

how to connect an external hard drive and monitor a single port thuderbolt

Yu connect the HDD to your Mac and then the monitor to the HDD.
The HDD should have TWO T-Bird ports on the enclosure.
Its called daisy chaining and up to five devices can be connected in this fashion.

How to monitor CPU usage and performance on a Hyper-V server with several VM's

I have a server that is running Windows 2008 64 bit Hyper-V, with 8 gigs of RAM and Intel Xeon X3440 @ 2.53 Ghz, which gives me 8 logical cores in the performance monitor on the host system.
I have set up three Virtual Machines, all running Windows 2008 32 bit.
Build server, running Team City
Staging server
SQL Server, running SQL Server 2005
I have some troubles with the setup in that the host monitor remains responsive at all times, even though the VM's are seemingly working at 100% cpu and are very sluggish and unresponsive. (I have asked a separate question about that.)
So the question here is: What is the best way to monitor how the physical CPU's are actually utilized? The reason I am asking is that I am being told that i cannot reliably use the task manager to monitor CPU usage in a VM.

First, you have to remember that in Hyper-V that the "host" is called a parent partition and it really just like a virtualized guest with special permissions and roles. Just like any other child/guest, when you open up Task Manager, you can not see the CPU
usage of the other children on the server.
Ben Armstrong has a good explanation of this here:http://blogs.msdn.com/virtual_pc_guy/archive/2008/02/28/hyper-v-virtual-machine-cpu-usage-and-task-manager.aspx
To summarize his post, you need to check three things to get an accurate picture of CPU utilization:
View the CPU usage on each guest - this is available through Hyper-V Manager or Performance Monitor.
CPU usage due to context switching - this is the perfmon counter called % Hypervisor Run Timeunder Hyper-V Hypervisor Virtual Processor
Child partition worker process - vmwp.exe running on the parent partition (1 per child). This handles Hyper-V operations like saving
state.

Data usage and battery drain has skyrocketed with iOS 8.1.2 (maybe earlier)

3 weeks ago my wife got a text message on her iPhone 5 from AT&T that she had used 90% of her data for the month. 30 seconds later, she got another one saying that she had used 100%. Granted, her data plan is small, 200 MB. But, for the last two years she has used as little as 17 MB in a month and her largest prior to this latest month was 49 mb. This month she got to 380 mb before we were able to shut off her cell data. Otherwise, a second chunk of 200 MB and another $15 would have been added to the month.
We had noticed that her battery had been draining rather rapidly in standby mode with no background apps running when she didn't have access to WiFi. We have now correlated the two results, High Cell data usage, Quick battery drain and very warm phone. In case anyone is wondering about her iPhone 5 being one in the recall, it is. I took it in and had it tested. Apple says the battery is fine. It does hold a charge well. When all network communications are shut down on her phone and it is in standby mode, there is no noticeable loss of charge in 24 hours (our longest test).
Since I have a grandfathered Unlimited Data Plan with AT&T, I have been doing some testing on my iPhone 5s. Sure enough, I've seen similar results. With nearly everything turned off except Cell Data, I've seen 483 MB used in 24 hours. Of that total, 479 MB was used for Documents & Sync. I even have everything turned off in my iCloud account, Location services are turned off, no push notifications etc...
The best I can figure, this has been a problem since we installed 8.1.2 and yesterday I installed 8.1.3 resulting in no positive effect on this issue.
At this rate of data usage and no access to WiFi, my wife would have to have a 15 Gb data plan to keep from exceeding her limit. I don't think AT&T even offers one that big anymore. I might have to switch to Sprint or T-Mobile if this doesn't get resolved.
Any ideas would be greatly appreciated. Thanks in advance for your shared insights.

Hey this is Brian, bjmcmurry, under a different user ID. If I logged in as bmcmurry, original post, I was just getting a server error and couldn't get to this discussion nor post a comment anywhere.
Anyway, let me be as brief as I can. After an extensive analysis of replicating the problem on another phone to eliminate it being a hardware specific issue and that the test phone has an unlimited data plan, I was able to stop the excessive data usage and consequential battery drain. I believe I have a reasonable explanation of the problem, an iOS logic bug.
I had everything under my control clamped down on the test phone to minimize data usage. Also, I was forcing all data usage to use the cell towers. I determined that I was burning at least 11 to 13 Mb per hour doing nothing important. I literally had everything turned off except 'Settings' was allowed to use Cell data providing a avenue to log into the Apple ID.
The two phones had 2 things in common, they were using the same Apple ID and the same version of the OS. One was a iPhone 5 and the other was a 5s.
Here is a synopsis of my experience via my written evaluation of the Apple support system (Apple Rep name's have been removed):
After a couple of hours on the phone with an Apple Care Senior support Analyst, it was suggested that I go to the Apple Store to 1) get my battery replace in the iPhone 5 since it qualified for the replacement program and 2) see if the Genius could provide me with any insight in the data usage issue and battery drain.
I'm certainly glad I had multiple reasons to visit the closest Apple store, a 45 min drive. I got the battery replaced, thanks for that.
Regarding the important issue to me that brought me to the Genius Bar, excessive Cell data usage, I thought the Genius did a wonderful job listening and documenting the problem we were experiencing. Unfortunately, educating us on the use of the product or replacing our phone was not going to solve the problem. He eventually figured it out, this was not a user error or broken hardware. We surmised that the reason I was sent to him was to verify and document that there was a problem. I clearly had a problem. After writing copious notes on the issue, The Genius smartly referred me back the the AppleCare Senior Advisor. So, back to AppleCare Senior Analyst I went. She, knowing this was not a simple problem to solve i.e. beyond her level of expertise, got an Apple Software engineer involved.
My primary frustration is that this should have been escalated to software engineering right away. My trip to see the Genius was, I believe, a waste of time for both me and Apple regarding this issue. Diagnosis of this type of problem is well beyond the Genius’ knowledge and job. The Genius did a very good job doing what he could within the scope of his job. He just couldn’t solve this problem and had no one within Apple to which he had access for help.
However, that initial consult with the engineer was a bit feeble. Not only could I not talk to him/her directly, his/her focus was still working with the ‘Black Box' approach. Having Analyst ask me to do stuff like restore the Phone was more like trying to find a 'work around' than 'identifying the real problem.' Maybe restoring the phone was going to fix some corrupted data on the phone sidesteping the real problem, the handling of this condition. The engineer did listen to the fact that I had restored the test phone, the 5s, and only added the use of my Apple ID. Duh, been there!!!
Having been an previous owner of a software development company that I started in 1980 and retired in 2001, I can tell you that using the 'Black Box' method of debugging is extremely inefficient. Instead, having access to an ‘Activity Manager’ type app to identify in real time what process was blowing up the data flow would have saved me a lost afternoon at the Apple store and hours on the phone with tech support.
Ironically, I may have stumbled onto a "work around" solution short of turning off Cell Data that stopped the excessive Cell Data usage and consequential battery drain. Just prior to leaving the Apple Store, I used one of their Macs to log in my Apple ID on the id.apple.com website to ‘Manage my Apple ID’, I was forced to upgrade the security level of my password. Afterward, my cell data usage seemed to drop dramatically.
I told the AppleCare Senior Analyst that I may have stumbled onto a workaround and I suggested that I give it a couple of days of monitoring. We'd talk then and I would have results to report. She agreed.
Sure enough, my Document & Sync usage was back to normal, about 1/2 Mb per day. Am I happy that the excessive Cell Data usage has stopped? You bet! But, there was no intuitive reason that an end user would know to log in on the ID website to unknowingly solve this problem. As I use to say to my employees, that is not the ‘Macintosh Way.’ And, rebooting the the 'Microsoft Way.'
When I reported my findings to the Analyst, we both concluded that data usage was back to normal. She did report to me that the engineer did provide a laundry list of suggested activities to help solve the problem. Remarkably, they were everything that I had already done and were pretty much what the Analyst and the Genius tried to do. All reasonable tasks. But clearly, the engineer hadn't even ready the notes on the case before responding. And, none of the things suggested would have uncovered the real problem, likely a logic bug in iOS.
My advice now is to have the software engineering team rule out that there was an unresolvable state that a background process was fiercely trying to handle. The iOS does not seem to know how to intervene and prompt the user with a requirement to upgrade their password. If this does end up being the case, I would call it a logic bug, a perpetual exception that is not being handled properly.
Anyway, I hope this helps you.

My MBP is port scanning, and I dont know why!

Ever since this Tuesday at the office (we're all running macs) the internet keeps going down.
I called the ISP, they told me that one of the machines looks like it has a virus running, one of them is port scanning- and that overflowed the router and froze it.
Turns out its my personal MacBook Pro that matches the IP address he gave me. I was FTP'd into a server and downloading a website for backup.
He said something like ports 4400- 58,000 were being scanned sequentially and that it seemed like there was a virus on the computer, I was shocked- and told him that we were all on macs. Perhaps the FTP client (called "fetch") failed to connect to one port and tried another and another ect. But, the tech guy also said that it wasn't on FTP protocol.
Today I've been working on securing my machine. I stopped using the Wi-fi, turned on my firewall ( I know, bad idea to not have it on ) and installed ClamXav and Little Snitch.
Perhaps I have some kind of malware? Is it too late?
Help!

Isp's always blame things on the mac when they don't know why something is happening to their network.
You could launch Activity monitor and look at all the processes that are running. Sort it my cpu cycles. There could be an application stuck in update mode or one trying to phone home..like adobe updater.

Connecting home theater projector and monitor in kitchen

I just ordered a refurbished 2.0Ghz mac mini so I can use it as my home theater computer. I would like to connect it to my receiver's HDMI input so I can display the video on my projector. I also want to connect it to a monitor in my kitchen so I can use it on a daily basis for basic emailing, surfing, etc. It appears that I can connect the mini's mini DVI port with the included mini DVI port to DVI adapter and then attach a DVI to HDMI adapter which will in turn connect to my receiver's HDMI input. Another option is that I can purchase a mini DVI to HDMI cable and avoid the DVI to HDMI connector. Audio would be fed to the receiver from the optical digital output jack to the receiver's optical input.
In order to connect it to the monitor in my kitchen which has a DVI and VGA input, can I use the mini Display Port? I believe I can just attach a mini display port to DVI cable and attach to my monitor's DVI input? The run is about 25 feet. Will the mini mirror to my projector and monitor this way? Also how can I send the audio to both the receiver and the monitor in the second room. The monitor has a regular mini Jack audio input. Thank you.

Welcome to the Apple Discussions!
I use the enclosed mini-DVI to DVI (D) adapter with a DVI (D) to HDMI cable and it works just fine. There is no DVI to HDMI converting the signals are compatible. And I am using an analog patch cable for the audio as you propose with the digital.
On the kitchen monitor, Apple makes both a mini-DisplayPort to DVI (D) adapter and a mini-DisplayPort to VGA adapter. But you need to know what DVI input the monitor requires, the mini is DVI (D) only. If the monitor uses DVI (D) then you can use a DVI (D) to DVI (D) cable with the mini-DisplayPort to DVI (D) adapter. If you go with VGA, then a VGA to VGA cable with the mini-DisplayPort to VGA adapter.
Audio for the kitchen is another story. The mini's audio port is either analog or digital. It cannot do both at once. There are USB audio dongles, but I do not think that the Mac is capable of doing both digital and analog audio at the same time, even out of different ports, but I do not know for sure.
Dah•veed

Why is there no updates to the firefox throttle add-ons ? Is there an alternative? throttle is Bandwidth utilization throttling and monitoring extension for Firefox

Why is there no updates to the firefox throttle add-ons ? Is there an alternative? throttle is Bandwidth utilization throttling and monitoring extension for Firefox

Well, it's probably one of two things: either the awesome dude(tte) who developed this awesome extension was tired of updating or the changes in FFox software architecture carried out between version 3.x and 4+ created challenges that were too difficult for him to surmount or a combination of both. Honestly, I love Mozilla but I think they dropped the ball on the throttle issue. It's such an obvious and necessary function and it's so easy to implement. They should have included it a long time ago as in built feature. And, if you are browsing and looking at this post and you agree. Add a suggestion in mozilla.org. The more of us asking for this function, the better.
Meanwhile, I have the following solution for you:
Solution 0.6.9.23.11 (DIY Version of my Solution ):
Setting Up a Separate Portable Firefox 3.6.x that runs independently of and simultaneously to your latest version of Firefox
Get FireFox Portable 3.6.24:
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
It's a portable app, meaning that it's got all it's profiles and preference and application files in the same directory. It won't compete with your current installation of Firefox, has it's own separate extension folder etc...
Get Firefox Throttle 1.1.6
http://firefox-throttle.en.softonic.com/ (I couldn't find it in the official mozilla site)
It will be flagged as incompatible with even that old version of firefox (but it isn't). You just need to turn off compatibility checking. You can do that with this extension:
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/?src=search
If you have Bookmarks you want to port to the portable (bad pun intend), backup them up to bookmarks.json file on your desktop and import them to the portable version. You can export/import more stuff using FEBE addon but that's a whole world of headaches if you don't your doing.
Many of your extensions favourites extensions will no longer work on FFox 3.6.x but if, in that same addon's page, you look around until you find a link to previous versions of the addon, you will notice that the compatibility info is right below the version numbers. Just download and install the latest version that is compatible with you 3.6.x....
Voila mon ami! Your FFox 3.6 portable has just become your own private Download Mule whom you can throttle to your hearts content (ever throttle a real Mule??? I wouldn't try it, personally...) Do your regular browsing in another (unthrottled) browser and do your big downloads in the Mule...
If you want to keep using your brand spanking new Firefox for other types of browsing while using this portable Mule edition for the downloads, just add -p -no-remote to the shortcut leading to your Firefox Portable Mule edition.
For example, my taskbar shortcut to my Firefox Portable is:
""C:\Program Files (x86)\FirefoxPortableLegacy36\FirefoxPortable.exe"
I just changed it to:
"C:\Program Files (x86)\FirefoxPortableLegacy36\FirefoxPortable.exe" -p -no-remote
This will make it occupy it's own independent instance and I can use the both my Firefox Nightly and the Firefox Portable editions at the same time (each one, using a different profile ie. extensions, cookies, password, cache etc).
If you're on Linux, you can just run this on Wine and set the Windows Version to Windows 2000 in the Wine config,
If you want to get rid of the Portable Apps splash screen, click here:
http://www.ghacks.net/2011/06/06/getting-rid-of-portableapps-splash-screens/
Solution 0.6.9.23.11 (Non-DIY Version of my Solution):
Download my preconfigured but SWAGGED-THE-HECK-UP PortableFirefox 3.6
Having realized that some of you may find the above to be daunting. I took my own customize firefox portable, took out all my data and compressed the folder (it's portable, so it'll run as soon as you unzip it).
Here is a screenshot:
http://www.mediafire.com/?o95nkwo8y6q535j
Here is the download link:
http://www.mediafire.com/?xdw87ivf3184u2s
Don't forget to modify your Start/Taskbar shortcuts:
"C:\wherever you decide to put it\FirefoxPortableLegacy36-Swagged-UP!\FirefoxPortable.exe"
I just changed it to:
"C:\wherever you decide to put it\FirefoxPortableLegacy36-Swagged-UP!\FirefoxPortable.exe" -p -no-remote

Accessing Parallel Port Control and Status Registers with VISA and Win7x64

Hello all,
I've posted this in the I/O forum for VISA, but this main forum seems to get a lot more traffic so I'm posting here too.
Wondering if anyone has a solution for accessing the Control and Status registers on a parallel port with VISA, now that Win7 has locked down the I/O ports and In Port.vi and Out Port.vi don't work anymore. I've been looking all over for a solution and haven't found anything that will help; either the VISA solution is shown but doesn't mention if the Status and Control registers are accessible, or the solution is for a 32 bit system.
The one thing I found was under Instrument I/O>VISA>VISA Advanced, there is a group of functions called Register Access; but, when I investigate that, it seems to need an address that the detailed help describes as "VXI, VME, and GPIB-VXI" or "PXI" with no mention of Parallel Port usage, so I'm pretty much at the end of what I can figure out.
Basically what I need to do is use the data lines to send info, and watch the status lines for incoming discrete signals. Since parallel ports are half duplex, I can't have the data lines be both inputs and outputs simultaneously, which is what I need. A cheap D I/O card would be the easiest solution, but to make a long story short I'm dealing with a legacy system and that's something my higher-ups want to avoid.
Any help is greatly appreciated!

Hello,
I was able to solve this problem using software from Entech Taiwan; it's called TVicPort and it's available for free for personal use, and very cheaply for commercial license. If you have questions let me know, I'll do my best to answer them but investigate Entech's solution and see if it'll work for you:
http://www.entechtaiwan.com/
http://www.entechtaiwan.com/dev/port/index.shtm

Problem by opening Data Orchestration Admin and Monitoring Tool

Hi all,
Using SAP NetWeaver Mobile (7.1) only
You can access the SAP NetWeaver Mobile Administrator through the DOE. To do this, you must log on to the DOE and choose Data Orchestration Engine ® Data Orchestration Admin and Monitoring Portal.
When the Browser opened, i dont get any information, there comes "The page cannot be displayed"
But under DOE SETUP AND REPAIR i have installed all packages.
I have installed the SAP Netweaver AS ABAP 7.1 newly, so is there a step which i forget?
i hope you can help me
thanks
hassan

So i have activate all the services, but there comes the same page.
There is no fault number...
This is the url:
http://sapnw71:0/sap/bc/webdynpro/sap/sdoe_administration?sap-client=000&sap-language=EN
What is with this port? Could that be possible?
The page looks like this...
The page cannot be displayed
The page you are looking for is currently unavailable. The Web site might be experiencing technical difficulties, or you may need to adjust your browser settings.
Please try the following:
Click the Refresh button, or try again later.
If you typed the page address in the Address bar, make sure that it is spelled correctly.
To check your connection settings, click the Tools menu, and then click Internet Options. On the Connections tab, click Settings. The settings should match those provided by your local area network (LAN) administrator or Internet service provider (ISP).
See if your Internet connection settings are being detected. You can set Microsoft Windows to examine your network and automatically discover network connection settings (if your network administrator has enabled this setting).
Click the Tools menu, and then click Internet Options.
On the Connections tab, click LAN Settings.
Select Automatically detect settings, and then click OK.
Some sites require 128-bit connection security. Click the Help menu and then click About Internet Explorer to determine what strength security you have installed.
If you are trying to reach a secure site, make sure your Security settings can support it. Click the Tools menu, and then click Internet Options. On the Advanced tab, scroll to the Security section and check settings for SSL 2.0, SSL 3.0, TLS 1.0, PCT 1.0.
Click the Back button to try another link.
Cannot find server or DNS Error
Internet Explorer

BT HomeHub 5 intercepting traffic on port 554 and ...

As the title says, my homehub appears to be intercepting packets on these two ports and, infuriatingly, is replying as the target resulting it as showing as open on all hosts. Does anyone have insight into why it would be doing this as well as how to disable this behevior.
C:\>tcptrace 75.27.30.143:7070
Tracing route to 75.27.30.143 [75-27-30-143.lightspeed.crmlin.sbcglobal.net] on
port 7070
Over a maximum of 30 hops.
1 2 ms 1 ms 2 ms 192.168.1.254 [BThomehub.home]
2 Destination Reached in 5 ms. Connection established to 75.27.30.143
Trace Complete.
C:\>tcptrace 75.27.30.143:554
Tracing route to 75.27.30.143 [75-27-30-143.lightspeed.crmlin.sbcglobal.net] on
port 554
Over a maximum of 30 hops.
1 2 ms 2 ms 2 ms 192.168.1.254 [BThomehub.home]
2 Destination Reached in 9 ms. Connection established to 75.27.30.143
Trace Complete.
This is expected behevior for a closed port.
http://pastebin.com/npXxS9b2

What is happening is there is either a crash or hang triggering a reset and the restart cannot occur due to a hung or dead handle to Port 554. The next time your server gets in that state, can you run a netstat -ano and see if a process tied to sghwdsptr.exe
is still listening on that port. Usually it is a hung dispatcher or its zombie which is why a restart will not work but a reboot. If you do find the process still active, you could try killing the process to see if you can restart without rebooting.
With regards to how it gets into this state - I would follow Nicke's advice with regards to the blog but also remember that RTSP (due to its ephemeral port usage) has a finite limitation. How many clients are checking in with this management server? Also
what are the average number of *applications* not packages being used by each one?
Steve Thomas, Senior Consultant, Microsoft
App-V/MED-V/SCVMM/Server App-V/MDOP/AppCompat
http://blogs.technet.com/gladiatormsft/
The App-V Team blog: http://blogs.technet.com/appv/
The MED-V Team Blog: http://blogs.technet.com/medv
The SCVMM Team blog: http://blogs.technet.com/scvmm/
“This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.”

Displayport splitter showing as "PnP montor" in Windows and monitors are blank

T430 laptop with Intel 4000 + Mini Dock Plus Series 3 docking station 2x(DP+DVI) + Windows 7 64 bit, 3 monitors:
1. 1920x1080 Dell monitor connected to the docking station DVI port 1, main monitor, works fine
2. Laptop's own LCD (1600x900) detected but manually disabled
3. Two 1680x1050 monitors connected to the Lenovo DP splitter box (OEM company is IDT?) which is connected to the docking station DP port 2. The DP splitter is shown as "PnP montor" (typo as shown) with 1280x1024 as the highest resolution but the two monitors connected to it detect no signal.
Windows detects the first two fine. But does not seem to be able to detect the DP splitter box properly? I saw a post on the net showing the same Lenovo DP splitter being detected by Windows as "IDT VMM1300". I gues IDT is the OEM company and VMM1300 is the model of this particular box. Has anyone seen this issue before? Is this box supposed to be plug and play? I cannot find anyway to download/install drivers for it. I updated the Intel 4000 graphics card drivers via the Lenovo's "TVSU" system update tool, but nothing changed. I cannot get it identified as "IDT VMM1300" (hoping to get the 3360x1050 resolution option with that).
I tried the other display port ont he docking station, it did not help. The two Dell monitors are connected to the DP splitter via active single link DVI-DP adapter cables. These should be fine since they both work properly as single monitors when connected to the display ports on the docking station directly (via the same DVI-DP adapter cables).
I'm trying to get 3 external monitors to work with my T430/Intel 4000.
Thanks in advance.

I had the same issue with a Lenovo T440. I thought this was a prank that somebody had installed on the computer as the name that shows up is PnP "Montor". I was able to fix this with one of our staff. The only thing that fixed it was replacing the VGA cable.

I have a G5 PPC Dual 20" Mac Displays - I want to incorporate a Mac Mini and still use my keyboard and Monitors and Switch back and forth. How do I do this?

I have a G5 PPC Dual 20" Mac Displays - I want to incorporate a Mac Mini and still use my keyboard and Monitors and Switch back and forth. How do I do this?

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

Diagnostics Profiling JDBC usage and leak problem

Hi:
Currently, I running diagnostics profiling JDBC usage and leak on my four Managed servers. It is collecting data for few hours, then it stop collecting data. Do anyone know why? How can I get it back to collecting data? Thank You

Hello,
Sorry you're having trouble...could you provide a bit more information as to your configuration, and how you are enabling JDBC profiling?
Specifically:
- What version of the server are you using?
- Are you using the JDBC profiling hooks, or do you mean that you are using WLDF JDBC Instrumentation Monitors?
- Are you saying that you're experiencing leaks because of this issue, or that you are using the profiling functionality to debug a potential leak?
If you have WLDF configured, can you post your WLDF System Resource descriptor? It's located in <domain-dir>/config/diagnostics.
Thanks,
Mike

IPIVR 8.0 port usage and monitor

Similar Messages

Maybe you are looking for