IPOD DOES NOT FOLLOW FINGER ACTIONS IN DIFFERENT GAMES LIKE JELLY SPLASH

transparant cover removed no significant improvement.
ipod does not follow exactly my finger movement.
this does not happen permanently some times the ipod works ok, somte times not.

Make sure the screen is clean
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

HT3211 My tracking pad is not working. It controls itself and does not follow my finger commands. If I bring it to an apple store, would I be able to have a new pad installed?

My tracking pad is not working. It controls itself and does not follow my finger commands. If I bring it to an apple store, would I be able to have a new pad installed?

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, take the computer to the Apple store to have it checked out
and repaired, if needed.
Best.

After 4.3.3 upgrade ipod does not shuffle songs

After 4.3.3 upgrade ipod does not shuffle songs. The stop shuffling after any interruption occurs. So If play in the card, get a call, answer it then go back to the music, I have to manually select shuffle. This did not occur prior to the IOS update.

WEP and Apple products are only somewhat compatible - as you are finding out. If you create your own passwords, then you have to follow specific rules - 48 bit, 5 characters, 128 bit, 14 characters. Shorter or longer, the password won't work.
If you are stuck with WEP (I'd update the laptops with a USB wireless stick before I used WEP, but that's your decision) try the following:
1. Use the 128 bit setting
2. Either create a 14 character password or use WEP key 1 (that's the hex key) in place of your password on the touch.
You could set up a second wireless access point and, as long as it used a different SSID, setup to run WPA2-AES encryption. That would take care of your modern devices.

IPod does not respond at all when plugged in

Alright, this topic is for people who have had this exact problem only. I don't want to get this confused with other problems and have people trying to help troubleshoot multiple problems and get things mixed up. Here's the problem.
After updating to v1.1.2 of the iPod software, the iPod does not respond when plugged in. The iPod still works fine when not plugged in. It plays music and both the standard and shuffle play modes work accordingly. The problem is when you plug the iPod in, it doesn't charge and it doesn't mount. The orange blinking light does not come on. While plugged in, it works the same way as it does when you're listening to music with it. It's as if the iPod's USB connector is dead. Here is my original post and description of the problem.
Alright, so here's my story. I bought my 512MB Shuffle in April. It has worked perfectly fine since I got it. Last night, I updated to v1.1.2 of the iPod software, clicked no when it asked if I wanted to restart, added some songs to the iPod, then restarted. As of this morning, I went to listen to some music while out for a bike ride, and I was greeted with the red battery light. I thought it was a bit odd since I had left it plugged in overnight. I figured, what the heck, I'll just plug it in and let it charge when I get back. When I got back, I plugged it into my PC and left for a while. I came back later and went to grab my Shuffle and I noticed it was cold, which was unusual after charging for a couple hours. I plugged it back in, a bit frustrated, and it never came up in Windows. I looked at the iPod plugged into the back of my PC (a high powered USB port) and sure enough, no orange light. No lights at all. I can still slide the switch to one of the play modes (standard play or shuffle) and play music for a couple seconds before it stops and says the battery's dead again. It works.. I mean it turns on and plays music, it's just not charging or mounting when I plug it in. I tried multiple computers and USB ports, none of which worked. I would really like some help with this considering it IS my only source of portable music and I'm not going to go pay $50 to talk to tech support or have it sent in for repairs. That's half of what it's worth.
I've tried uninstalling all iTunes/iPod related software from the PC I normally use it on and reinstalling it. That didn't work. I also tried uninstalling again and installing the last known working version of the iPod software, still no results. The only thing I havn't tried is giving it a good beating... Not that I would. Anyways, I hope there's a solution to this that doesn't involve buying a new one.
Here's a rundown of the computers I tested it with.
500MHZ G4 Cube (384MB RAM/Mac OSX Tiger)
400MHZ G3 iMac (384MB RAM/Mac OSX Tiger)
4.2GHZ AMD 64-Bit running Windows XP Service Pack 2 (my PC)
515MHZ Dell running Windows 2000 (256MB RAM)
UPDATE: The BIOS won't recognize the iPod, so it has nothing to do with my computer. Somehow, installing v1.1.2 of the iPod software made it so the iPod itself has USB problems. The iPod works to the extent of playing music and showing the battery charge level. I get no response at all when I plug it in, from the computer or the iPod.
I'm going to have to agree with Philip Harhay on this one. The original 10GB iPod I bought 3 years ago came with a full one-year warranty, no extra charges. I am disappointed to see the Shuffle only coming with a three-month warranty.
------------------------------------------------------------------

Help! I just purchase an iPod Shuffle for my son's birthday and I cannot get the darn thing to show up on my iMac G5. I am running OS 10.4.2 and I have downloaded the latest iPod and iTunes software. When I try to restore my iPod to the factory settings it tells me to plug the iPod into the computer, but it is plugged in. I have tried different USB ports, too. I'm running out of ideas and so is the trouble shooting Apple site. I was hoping someone out there might have some ideas.
It showed up at first and I transferred a few songs from the iTunes to the iPod but I couldn't get them to play, so I plugged it back into the USB and the icon never came up.

5th gen ipod does not connect to mac desktop or itunes

My ipod does not connect with my desktop or itunes (ie when I plug the ipod in using the original USB cable nothing happens--no charging no recognition that it has been connected). My nano does work with the same cable so I know it's not that. I've followed the support instructions resetting, downloading the latest software and restarting. I cannot, however, restore since the first step of the instruction is to connect the ipod and wait for it to show in the source list in itunes. It is also interesting that when I use the car charger the ipod does charge and shows the charging icon.
Any suggestions?

I guess i can lend my voice to the conversation. my ipod "locks up" when i connect to my computer also. i just updated itunes and have not been able to connect. there is no ipod folder on my computer when i search through ""finder". i have to "reset" it after i disconnect to continue to play it. i have done everything short of "restoring" due to i have over 3000 songs and i'm unable to back up. the manuel refers to a disk to update. i can only play songs, and recharge. need help to.

Ipod does not appear in iTunes

My ipod does not appear in iTunes after it was installed. Have tried all the troubleshooting and it does not work.

Did you do everything here:
iOS: Device not recognized in iTunes for Windows
Including
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

VO does not follow anchor link

I find it strange that VocieOver in Mac OS X (10.5.8) does not follow anchor links. The W3C specification documents and Wikipedia use them a lot; however the VoiceOver box does not follow the link while Safri jumps to that part of the page.
Is this a miss configuration at my part or has it been designed that way?
Thanks

Hi there
Your description seems to imply you are narrating at the same time as you are recording. This isn't best practice. Your best results will be obtained by adding the audio as a separate activity after you have recorded the screen action.
Often in a web recording we notice what is perceived as a mismatch. Often you end up with blank slides. This is because Captivate is running on your local PC (and running very quickly). But when you click a link to a web page, what really happens is that you send a command from your PC across the internet to a Web Server. The Web Server has to process that command, look up the desired page, send the page across the internet to your PC and it finally displays. While it may seem that it happens swiftly, compared to Captivate running on the PC it takes eons.
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

IPod does not shut off (? firewire problem ?)

My Ipod does not shut-off and I don't wan't any of the "have you trouble shooted" have you restarted your iPod"....yes and yes I have done all the troubleshooting and have restored my ipod. It says
"FireWire connections are not supported. To transfer songs, connect the USB cable provided.
Press Center to Dismiss"
It says that on my iPod not on iTunes andI am connected to USB and I'm not even completly sure what a firewire port is and yes I do press eject everytime im done using iTunes and take out my iPod....I'm Stumped

1. Try a different USB port on your computer.
2. If that doesn't work, try a different cable to connect your iPod,
3. If the above two steps do not work, check the connector on the bottom of your iPod and make sure there are no bent pins.

Ipod does not appear in the organizer.

Hi All.
I've installed the SDK 8 on my Mac OS x 10.5.
While following the Apple "How to start" I'v tried to get my Ipod device info from the xcode organizer.
Unfortunately my Ipod does not appear in there and it does being recognized by the Itunes 7.7.
Can anyone please explain to me what can be the problem (and how to solve it??)
Thanks.
Yaniv.

I digged into it as I had the same problem, I found this in the logs:
7/17/08 21:49:46 Xcode[2242] Error loading /Developer/Platforms/iPhoneOS.platform/Developer/Library/Xcode/Plug-ins/iPhoneR emoteDevice.xcodeplugin/Contents/MacOS/iPhoneRemoteDevice: dlopen(/Developer/Platforms/iPhoneOS.platform/Developer/Library/Xcode/Plug-ins/ iPhoneRemoteDevice.xcodeplugin/Contents/MacOS/iPhoneRemoteDevice, 265): no suitable image found. Did find:
/Developer/Platforms/iPhoneOS.platform/Developer/Library/Xcode/Plug-ins/iPhoneR emoteDevice.xcodeplugin/Contents/MacOS/iPhoneRemoteDevice: no matching architecture in universal wrapper
It turned out that XCode was running in 64bit mode, so it could not load the 32bit plugin. After toggling the 'Open in 32 Bit Mode' checkbox in 'Get Info' on XCode the device loaded (in 32 bit mode), then the iPod showed in the organizer.

Yesterday i made some purchases in itunestore. the download went well. till the synch of itunes with ipod. some of the downloaded music did noch synchronize. the message was: the ipod does not support the file format (mp4). strange, right?

Yesterday 20 november I have made some purchases in Ittunestore. The download went well. Till the synch of itunes with ipod. Some of the downloaded music did noch synchronize. The message was: the ipod does not support the file format (mp4). Strange, right? All the rest of downloaded music items has been synchronised without any problems. What may be the problem?

For music files purchased via the iTunes Store, Apple has used the following file extensions -
.m4a unprotected AAC format music files
.m4p protected AAC format music files
.m4b protected Audio Books
.m4r unprotected ringtones in AAC format
As you can see Apple have never used .mp4 for music files via the iTunes Store.
For videos Apple use .m4v and these are in H.264 format.
You could try changing the file extension to .m4a, first then see if it plays on your computer and then try re-synching it.

My iPod does not recognize USB cable?

I have three different USB cables for an iPod touch. My iPod does not recognize any them when plugged into a computer or a wall charger. What is wrong and can it be fixed?

Does the iPod work?
Have you tried resetting the iPod.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next would be to place the iPod in recovery mode and then try to restore via iTunes. For recovery mode:
iPhone and iPod touch: Unable to update or restore

Ipod does not work with new usb

i got my computer cleaned and a usb 2.0 pci card put in and now my ipod does not work with it, can anyone help

tell me what you mean and i will tell. i ask the guy in the shop to remove any viruses and put my files in order and also put winzip on, ad-ware se peronal and windows defender. and to install a usb2.0 pci card, so that i can put music onto my ipod faster. is this enough for you

I have consolidate my folders related to the video I am in the progress of working on. Premiere elements does not follow their new location. How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

I have consolidate my folders related to the video I am in the progress of working on. Premiere elements does not follow their new location. How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

This is the Photoshop Elements forum, not the Premiere Elements forum, located here:
https://forums.adobe.com/community/premiere_elements
When you open the project, it should ask you where the first file is located. After you tell it where it is, it should be able to find the rest of them if they are located near the first one. Then save the file. If you move the files again, you will have to relink them again.

Report Does Not Follow Select Column Order

Hi all,
Apex 2.2 on 10gXE
I always encounter this problem, the display column on report does not follow the select column sequence order in the "region source".
It is very tedious clicking the up/down arrow one-by-one in the "report attributes" especially if the display columns are plenty like 40 columns.
Is there a fix/patch or alternative tips for this bug?
Thanks a lot,
Edited by: 843228 on May 24, 2011 10:32 PM

Apex 2.2 on 10gXEStart by upgrading from this old unsupported version.
>
I always encounter this problem, the display column on report does not follow the select column sequence order in the "region source".
It is very tedious clicking the up/down arrow one-by-one in the "report attributes" especially if the display columns are plenty like 40 columns.
Is there a fix/patch or alternative tips for this bug?
>
This is not a bug. APEX maintains the original column order of the report. This avoids problems downstream in areas like the processing of <tt>g_fnn</tt> arrays in declarative tabular forms, where the assigned arrays are column-order dependent.
APEX 4.x fixes column ordering bugs that could lead to report corruption, and includes drag-and-drop column ordering in the new tree view in addition to the up/down arrow re-ordering.
If you really want column order to follow that in the source query, the workaround is to create a new report using the modified query.

My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset, and ipod does not appear on itunes when I plug it into the computer. This happened after I agreed to a failed software update.

My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either. This happened after I agreed to a software update which failed. How can I get it going again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPOD DOES NOT FOLLOW FINGER ACTIONS IN DIFFERENT GAMES LIKE JELLY SPLASH

Similar Messages

Maybe you are looking for